How can i Add two parameters to Account Analysis Report R12?

Please i need to add two parameters Vendor Name & Currency to Account Analysis Report?

Dear Helios
1- I added the two parameters through navigating to concurrent ->Program - > Define
2 - Modifiy XLAAARPT.xml (Adding paramters and modify the query)
is this correct?
Regards,
Edited by: user565050 on Sep 6, 2012 1:17 AM

Similar Messages

My sons have shared an iPad but had just one iTunes account. How can we add a second iTunes account?

My sons have shared an iPad but had just one iTunes account. How can we add a second iTunes account?

There is no reason to add a second iTunes account to the iPad unless your sons want to use their own credit cards for purchases and somehow I don't think is the case here.
Anyway.... Settings>Store>Apple ID - tap that ID and sign out. Then tap sign in and tap Create new Apple ID.
If your sons sync with one iTunes library on a computer, it can get a little confusing with two IDs. If either of them has their own iPod and they have been sharing purchased content with the one Apple ID, it gets a little more complicated as well with two IDs.

How can I share two differents Itunes accounts in my Apple TV ? I have one and my wife has another account and we want to share both in our apple tv. How can I do this ???

How can I share two differents Itunes accounts in my Apple TV ? I have one and my wife has another account and we want to share both in our apple tv. How can I do this ???

I assume you have different iTunes collections on different PC's, or on different logins on the same PC? If that's the case then just enable "Home Sharing" in each iTunes using the SAME iTunes username and password as you enabled home sharing on the Apple TV with. The account used for home sharing is NOT the same as the account used to access the iTunes store, so as long as you use the same account (pick one, doesn't matter which) then you should see both of yor iTunes libraries on the Apple TV. Note - each iTunes has ti be running in order for the Apple TV to see the library.
Here's some details on how to do it:
http://support.apple.com/kb/HT4363

HT1660 How can I maintain two separate itunes accounts on one single device without erasing either set of data?

How can I maintain two separate itunes accounts on one single device (iPhone 4) without erasing either set of data when syncing with itunes?

Hi,
Depends on what you trying to setup but for purchases, you can roll down at the very end of the iTunes/AppStore pages to logout of your current account and then login into a different one. Then your purchase will be billded to this new account. Everything will sync as you used to but in order to use the purchased content in iTunes or other devices, you will need to authorize them (you can have up to 5 devices authorized for an account).

HT204053 How can I sync two different email accounts?

How can I sync two different email accounts? All of this Mobile Me and cloud stuff got me all flustered and now I have two accounts possibly 3.

How to use multiple iPods, iPads, or iPhones with one computer

I just bought an ipad 2 wifi (no 3G) How can I add my Verizon email account to my ipad? I'd like to send/receive emails on my ipad.

I just bought an ipad2 wifi (no 3G). How can I add my Verizon email account to my ipad? I'd like to send and receive messages from I ipad.

Some help can be found here: http://ipadhelp.com/popular-list-of-email-name-servers/

How can I add credit to my account via PayPal? I don't have a credit card? Thanks.

How can I add credit to my account via PayPal? I don't have a credit card? Thanks.

Open iTunes. Scroll to the bottom. Click "Redeem".

How can I add funds to my account?

How can I add funds to my account?

Buy and redeem an iTunes gift card. They are usually available wherever gift cards are sold; grocery stores, convenience stores, Apple Stores, etc.

How can i add two values under the same property?

Hi all,
How can i add two values under the same property name in a
prop list? For example:
[question1: "item1","item2", question2: "item3","item4"]
To be more precise, i am creating a property list and I want
whenever a two values have the same property name to be added int
he list under the same property. For example:
gMyList.AddProp (#""&question&"" & x,
member("input").text)
question is a variable that is updated fromt he user's input.
Now, whenever somethign like this happens:
question = "question1"
member("input").text = "five"
question = "question1"
member("input").text = "six"
I want to output list to be:
[question1: "five","six"] and so on
Any ideas?

Maybe you could make each property a list (so you have a
property list full
of lists), and add multiple values to the list held in a
particular
property?
Cheers
Richard Smith

Using `n how can i add two empty line (two carriage return), between these two lines in the output file?

hi friends
using `n how can i add two empty line (two carriage return), between these two lines in the output file?
PS C:\> $env:COMPUTERNAME | add-content c:\file.txt
PS C:\> $Env:USERDOMAIN | add-content c:\file.txt
i tested "$env:computername`n`n`n$env:userdomain" | add-content c:\file.txt but it results in
myPCMyDomain
but i wanted the contents of the output file be like this:
MyPC
#empty line here
#empty line here
MyDomain
i tested many other forms but didn't work.
thanks

I tried it, as well. The line breaks were respected in the PowerShell console, Programmer's Notepad, and Word; they weren't in Notepad.
You are using a Unicode file. Locale is what?
If you just want notepad compatible line breaks then do this:
del file.txt ; "$env:computername`r`n`r`n`r`n$env:userdomain" | add-content file.txt ;notepad file.txt
Look in hex to see that `n is ^L or 0xA and is only one character. CrLf is 0xD 0xA - two characters.
My programmers editors and VS all understand a single ^L as a line break so does PowerShell. Only DOS/Notepad and other utilitis don't understand this..
¯\_(ツ)_/¯

Add PO Number to Account Analysis Report in R12

Hi Guys,
I have a requirement to Add PO Number to Account Analysis report under sub ledger Accounting application in R12.
Could you please help, if this requirement is feasible and what are the joins require for it.
As per my knowledge it goes like xla_transactions-> AP_invoices_all then to PO_headers_all.
Is there any other alternative for this.
Quick response will highly be appreciated.
Thanks

You can't go from ap_invoices_all to po_headers_all.
You will have to go from ap_invoice_distributions_all to po_distributions_all using the po_distribution_id.
And remember to perform an outer join because for some invoice distributions, you may not have a po.
Hope this helps
Sandeep Gandhi
Independent Techno-functional Consultant

How can I add a second email account to my IPad

How do I add a second email account to my Ipad

Settings>Mail, Contacts, Calendars>Add Account.

HT1202 hi im trying to link my itunes account to my husbands computer but it comes up with my stuff and his together?? how can u have two seperate itunes accounts on 1 computer?

how do i add a seperate itunes account to a new computer that is already linked to a itunes account?

Have a read here...
https://discussions.apple.com/message/18409815?ac_cid=ha
And See Here...
How to Use Multiple iDevices with One Computer

How can i use two list screens in Classical report.

Dear Sir,
In My Report in First screen i am taking the GR details and Display In it_final By Check Box Wise.
Based On The Check Box selection in First screen In Second Screen i want The Challan Details Based On Some In Puts In First Field.
so how can I call The second Screen In Classial report Plz Help Me.

check this report
REPORT ZNNR_ALVOOPS_SCREEN.
tables: mara,spfli.
types: begin of ty_tab,
        matnr type mara-matnr,
        ernam type mara-ernam,
        ersda type mara-ersda,
       end of ty_tab.
DATA ITAB1 TYPE TABLE OF SPFLI.
DATA WA1 LIKE LINE OF ITAB1.
DATA IO1 TYPE SPFLI-CARRID VALUE 'AA'.
data itab type table of ty_tab.
data wa like line of itab.
DATA OK_CODE TYPE SY-UCOMM.
DATA: GRID TYPE REF TO CL_GUI_ALV_GRID,
      CONT TYPE REF TO CL_GUI_CUSTOM_CONTAINER.
DATA: GRID1 TYPE REF TO CL_GUI_ALV_GRID,
      CONTA TYPE REF TO CL_GUI_CUSTOM_CONTAINER.
CREATE OBJECT CONT EXPORTING CONTAINER_NAME = 'CONT1' .
CREATE OBJECT GRID EXPORTING I_PARENT = CONT .
CREATE OBJECT CONTA EXPORTING CONTAINER_NAME = 'CONT2' .
CREATE OBJECT GRID1 EXPORTING I_PARENT = CONTA .
selection-screen begin of block b1 with frame title text-100.
select-options: s_matnr for mara-matnr.
selection-screen end of block b1.
select matnr ernam ersda from mara into corresponding fields of table itab up to 15 rows
where matnr in s_matnr .
call selection-screen 100.
*&      Module USER_COMMAND_0100 INPUT
      text
MODULE USER_COMMAND_0100 INPUT.
if ok_code = 'PB1'.
leave to screen 0.
else.
leave to screen 100.
endif.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Module STATUS_0100 OUTPUT
      text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
SELECT * FROM SPFLI INTO
CORRESPONDING FIELDS OF TABLE ITAB1 WHERE CARRID = IO1.
CALL METHOD grid->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
   I_BUFFER_ACTIVE               =
   I_BYPASSING_BUFFER            =
   I_CONSISTENCY_CHECK           =
    I_STRUCTURE_NAME              = 'MARA'
   IS_VARIANT                    =
   I_SAVE                        =
   I_DEFAULT                     = 'X'
   IS_LAYOUT                     =
   IS_PRINT                      =
   IT_SPECIAL_GROUPS             =
   IT_TOOLBAR_EXCLUDING          =
   IT_HYPERLINK                  =
   IT_ALV_GRAPHICS               =
   IT_EXCEPT_QINFO               =
   IR_SALV_ADAPTER               =
CHANGING
    IT_OUTTAB                     = itab.
   IT_FIELDCATALOG               =
   IT_SORT                       =
   IT_FILTER                     =
EXCEPTIONS
   INVALID_PARAMETER_COMBINATION = 1
   PROGRAM_ERROR                 = 2
   TOO_MANY_LINES                = 3
   others                        = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
           WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
   CALL METHOD GRID1->SET_TABLE_FOR_FIRST_DISPLAY
    EXPORTING
      I_STRUCTURE_NAME = 'SPFLI'
    CHANGING
      IT_OUTTAB        = ITAB1.
ENDMODULE.                 " STATUS_0100 OUTPUT

Adding New Parameters for Account Analysis Report

My requirement is to customize the Account Analysis report and need to add two parameters(PO Number And Item).In the Dev Instance I have done by creating the customizing package instead of XLA_ACCT_ANALYSIS_RPT_PKG to some xxxx_pkg used in the XLAAARPT.xml file.But when i am doing this in Production the user does not have access to the Packages he has only access for tables and synonyms.I am unable to create the customize package is there any other way to decalre and use parameters in XLAAARPT.xml file.
If there is any possibility please provide me the solution as soon as possible.
Thanks in advance

Hi
Did you customize the Account Analysis Report? I need to add new columns PO NUmber and Item # . COuld you please let me know how can I get those columns to display in the report? I mean the joins to the tables.

How can i Add two parameters to Account Analysis Report R12?

Similar Messages

Maybe you are looking for