How can I adjust the clip speed in the editing window of Premiere Elements 11?

In former versions of Premiere Elements I could change the function while pushing the corner of a clip in the editing window: it was not cutting only, but I could also use it to adjust the speed of a clip (clicked the clock icon, after that the speed of a clip was adjusted perfectly).
But in Premiere Elements 11 this funktion seems to have gone: Now the timeline in the editing window seems to have the cutting function only!
Yes, I still can use the function "prolong time" (or whatever it is called in English, I use the German version), but in this I just can guess what percentage would fit and it's a very hard "try & error" part to get it right. In the former version the speed was adjusted "automatically" to fit the duration the clip needs – that was way more comfortable.
So, is this function really gone? I couldn't emagine why! Or how is this done now?
Couldn't find any post or video, explaning how to do that now.
No: The new "time zone" feature is not the same: it's not adjusting the needed speed rate automatically.
And by the way: There is a bug in that fuction: When I once added a new time zone, I can't remove it – clicking "set back" (or reset) doesn't do anything, the time zone stays where it is and is not deleted at all! I'm using a Windows 7 Ultimate system (64 bit) ...
I really would appreceate if someone could tell me how to adjust the clip speed perfectly to the needed duration of a clip!
Thanks in advance!

SG
An interesting point that you point out
"However, the drag-to-size method of adjusting Time Stretch has indeed been removed from version 11."
I am assuming that you are referring to an earlier version of Premiere Elements, having a Time Stretch icon (clock icon) above the Timeline to select, and then perhaps, with the mouse cursor, dragging on the end of the video clip to increase its duration. The keyboard shortcut to select the "clock icon" in thar instance is X. If you look at Premiere Elements 11 Edit Menu/Keyboard Customization/Windows/Timeline Window/, you will mysteriously find "Time Stretch Tool" command with a keyboard shortcut X. And, if you look at Premiere Elements 11 Edit Menu/Keyboard Customization/Applications/Time Stretch, you will find "Time Stretch" with a keyboard shortcut Ctrl+R. Bottom line: I have not gotten the keyboard shortcut X to work in Premiere Elements 11 in this regard, but the Ctrl+R does to bring up the Time Stretch dialog to do the job.
In accord with this business of what is and what isn't...the good old Razor Tool. That disappeared from sight a long time ago. Yet users were able to use that in later versions using the keyboard shortcut C. Now for me that "C" does not work to change the mouse cursor to a razor for clip splitting at the Timeline level in Premiere Elements 11 in spite of the fact that Edit Menu/Keyboard Customization/Windows/Timeline Window continues to show Razor Tool command with keyboard shortcut C.
On the good news side of things, if one trims a clip in the Preview Window, one is still able to drag that trimmed clip to the Timeline (Expert view) and drag it out on either of its edges with the mouse cursor to recover the whole clip. And, the mouse cursor is still going to be that red ] with a double edged black horizontal arrow going through it.
ATR

Similar Messages

How can I maximize my wifi speed using the Time Capsule?

I do not feel that my wifi speed is as fast as it should be. I have a 2 TB Time Capsule and connect wirelessly with an Apple MacBook Air, an iPhone 5s, an iPad 4, and iPad mini. The online manual just tells how to do the initial setup but not how to tweak the settings. Any idea how I can check my settings?

There's little if anything to tweak. Your wireless speed will depend upon how many devices are using it at the same time since it is shared bandwidth. Wireless is also affected by what's between the device and the router like walls, ceilings, and other obstructions. If you have two devices connected at the same time one of which only supports 802.11a/b connections and one that supports and another that uses 802.11a/b/n (faster), then your network speed will drop down to the speed of the slowest device connected.
Just use it. There's little you can do unless you have defective hardware.

How can I efficiently resize photos and add zooms to send to Premiere Elements

Hi
I am regularly making DVDs in Premiere Elements V3 with about 200 pics from my V5 Catalogue ,with some zooms and then adding about a dozen edited video sequences, adding sound, transitions etc in premiere Elements. This is the normal profile of what I do
I now need to find a simple and efficient work flow to do this.
What I am doing so far ( but it might have to change very soon when I upgrade to V7 depending on how compatible the versions are, and whether they offer better ways to do this) is
     Make Collection in Photoshop
     Export to Folder ( my folder destination for the resized images), changing the resolution in the dialogue box
     Then use that folder as source for Premiere.
This works EXCEPT
     Issue1        The order of the pics was changed ,and was not that in the Collection. This was done during the export phase, so seems to do with PS, rather than the import to PE. It seems random, not date etc
    Isuue 2         Now how do I do my zooms, as currently this can only be done in slide show creation , I think,. And I don't think you can the save a slide show to file.
    So I am getting a bit confused
At first I used "process multiple images", but it used an extra stage, first "export to file", then "process Multiple files". This was not as quick but did retain the order.
So if there are suggestions on the best way to do this in general and for PE7and PS7 that would be helpful.
Thanks
Chris

update your mac to the latest and greatest lion software. then you can photo stream wirelessly through wi-fi. but that is about it. and beware, lion has had many issues. make sure you look at the comments people are making on the reviews page and make sure the problmes have been updated. i have not upgraded yet, for i want to wait to see if they get all the bugs worked out before doing so. been issues with losing information and firmware issues.

How,can,I,adjust,the,camera,settings,on,my,2009,Mac,to,16:9,format?

I want to use the camera on my 2009 iMac to shoot some footage for a video project. The project is in 16:9 wide screen. How can I adjust the camera to shoot in this format?

Thanks for letting us know your questions was answered! A few other thoughts....
RobertofLadywellVillage wrote: ...the video from the i-sight camera is still in 4:3 format so I suppose that it simply can't produce video in 16:9...
True, the viewed camera image is always 4:3 with your old iMovie 6 HD, but experiment a bit.
Some of the iMovie 6 video formats you can select when you create your iSight clips in the separate iSight project can create a 16:9 frame. That frame will contain your 4:3 iSight image but be filled out to 16:9 with symmetrical black bars on the left and right sides of the image. These clips will be importable into your widescreen project. Although the portions recorded on your iSight will contain the black bars that keep the 16:9 aspect ratio you need, you should be able to include both the iSight captured video and your other video clips in the same 16:9 final product.
If you have a 16:9 digital cameras that can record the clips, use that to get the format you need and better image quality than iSight can provide.
However, if you really need to record 16:9 iSight video, and if your Mac has QuickTime Player (version 10.x), try using QTX. After you open a "New Movie Recording" window, QTX can change camera recording aspect ratios by using its Preference controls as shown in this image of the :
If you really need to use an iSight to capture widescreen video that is not block-filled, another option would be to use a later iMovie version that can record widescreen views of your inbuilt camera. I use iMovie '11 to do this, but, if you don't already have later versions, be sure to check System Requirements for later iMovies before you buy to see if they can work with your Mac OS version.
RobertofLadywellVillage wrote: ... Sorry for the commas folks. I had some difficulty posting this question ...
I had no problem understanding your post, and I actually enjoyed the non-standard title. I hope you don't mind my strange attempt at humor, but it is apparent that you were as able to understand my reply as I was your question.
Thanks for the excuse for my silly chuckle,
EZ Jim

HT5953 How can I speed up the "start speaking" feature in iBooks? (System Preferences Dictation and speech does not do anything to the speech speed.) The rate is a bit to slow.

How can I speed up the "start speaking" feature in iBooks? (System Preferences Dictation and speech does not do anything to the speech speed.) The rate is a bit to slow.

Hi, I had the same problem you described, and I noticed that there are two ways of activating text to speech on iBook for Mac, with different speed results (at least on my MacBook Pro Retina display)
On your iBook you can select the text and and then click on > More> Start speaking, and you will get a certain speed, which tends to be too slow.
But you will get the speed you had selected with "Go to System Preferences>Dictation and Speech>Text to speech. In there is a slider to adjust the speaking rate." if you use the TOP MENU (next to the black apple) under Edit>Speech>Start Speaking. I also learned that under System Preferences>Dictation and Speech>Text to speech, there is an option for a shortcut which is very helpful. And you can change Key. Hope this was helpful.

I pod touch is running at high speed,how can I adjust this please?ThanksJoan

I Pod youch is running at hhigh speed,how can I adjust this please?
thanks
Joany

If you mean playback speed, then you can adjust.
Have a look at the manual:
http://manuals.info.apple.com/en_US/iPod_touch_iOS4_User_Guide.pdf

How do I adjust double click speed in Mountain Lion. The mouse system preferences does not seem to have a speed slider for double clicking. Only the tracking speed slider is visible.

Double clicking is no longer opening my folders.
How can I adjust the double click speed in Mountain Lion to reduce the double clicking speed. The mouse system preferences does not seem to have a speed slider for double clicking. Only the tracking speed slider is visible.

For 10.8.3, it's in System Preferences > Accessiblity > highlight Mouse & trackpad on the left. The Double click speed slider shows on the right. Moving it to the left gives you more time between clicks. Moving it right gives you less time.

How can I select just the clips, or just the transitions?

If I have a timeline with 50 or more clips (or still shots, in my case) with cross dissolves between each one, I would like to select just the clips, or just the transitions, but not both. How do I do this?
Why? I am creating a video with hundreds of stills and a few video clips, and occasiionally need to change the duration of all stills at the same time (from 3 seconds to 4, for example). Or, if I want all of the cross dissolves to last 1:15 instead of 1:00, it would be nice to select and change them all at once. However, in both cases, I can't figure out how to select all 50 without having to Command-click 50 times.
Any ideas you have will be appreciated.
Bart

To perform the same duration change on just the transitions (cross dissolves, in this example), this technique will work:
Open timeline index.
Enter "cross" in the search box (or whatever transition you're wanting to change).
Select all cross dissolves in list (click one, then type Command-A).
Click the time strip in the top of the timeline area.
All of the transitions in the list should now be selected in the timeline.
Control-D to change duration.
Enter new duration.
Hit Return.
I hope this saves someone all of the time I spent on it today. I'm still ahead, though, thanks to Tom's help. This saved litterally hundreds of Command-clicks.
Bart

How can i adjust my display on videos. Result is dark same as with the camera . Thank you

How can i adjust my display on videos and camera. Result is dark same as with the macbook camera . When i play videos , its dark . Please help.
Thank you

Solution may be found if you search in the "More Like This" section over in the right column.
By camera you mean "iSight" try the suggestions in the article http://support.apple.com/kb/HT2090 and on EZJim's Website. If no help, post in the iSight forum area.

I have a large number of photos imported into iPhoto with the dates wrong. How can I adjust multiple photos (with varying dates) to the same, correct, date?

I have a large number of photos imported into iPhoto with the dates wrong. How can I adjust multiple photos (with varying dates) to the same, correct, date?

If I understand you correctly, when you enter a date in the Adjust Date and Time window, the picture does not update with the date you enter. If that is the case then something is wrong with iPhoto or your perhaps your library.
How large a date change are you putting in? iPhoto currently has an issue with date changes beyond about 60 years at a time. If the difference between the current date on the image and the date you are entering is beyond that range that may explain why this is not working.
If that is not the case:
Remove the following to the trash and restart the computer and try again:
Home > Library > Caches > com.apple.iphoto
Home > Library > Preferences > com.apple.iPhoto (There may be more than one. Remove them all.)
---NOTE: to get to the "home > library" hold down option on the keyboard and click on "Go" > "Library" while in the Finder.
Let me know the results.

How can I adjust the font size of my printouts?

I have an HP Officejet 4500 all-in-one printer and a new HP pavilion Slimline computer. Since I changed to this computer, my printouts have very small font size making them hard to read. How can I adjust the font size of the printout? Is it a computer or printer function? I appreciate the help.

I, too, am frustrated. This seems like something that would easily be handled within the application software. However, none of the fixes I've been offered have been very helpful. My cousin sugested using Control C and Control V to move the text to WORD. Once in WORD, you can manipulate the text on a WORD page...sometimes. I've had good and bad luck with this method. It still requires working in two different programs to get it legible. Does anyone else have a 4500 All-in -one with this problem, or is it only me? Thanks, [Edited for Personal Information]

How can i fix a clip when the video and audio are not matching up?

How can i fix a clip when the video and audio are not matching up? I imported the video from a junkdrive in a .VOB format and concerted to a .mov the videos were filmed on a miniDVD recorder.

I would try detaching the audio and the dragging the audio to the left or right until it lines up.

How can I adjust the font size in iTunes 11?

How can I adjust the font size in iTunes 11? Specifically, when in Artist view both the text in the sidebar and the track listing are huge.

How to change fontsize in iTunes
Take an XML-Editor and open:
"C:\Program Files (x86)\iTunes\iTunes.Resources\de.lproj\TextStyles.plist"
For other languages change your country code (de, en, fr, pl ...).
Example for english: "\en.lproj\TextStyles.plist".
Backup this File !!!
To change the Text-Size, change the integer value of the following item:
"<key>size</key>"
"<integer>8</integer>"
This means Text-Size 8
"<key>size</key>"
"<integer>12</integer>"
This means Text-Size 12
To change the font, change the integer value of the following item:
<key>font</key>
<string>Arial</string>
This means the font changes to Arial
This also works:
<key>italic</key>
<true/>
<key>bold</key>
<true/>
<key>underline</key>
<true/>
Example of common Text Properties:

<key>1033</key>
<dict>
        <key>- loc hint -</key>
        <string>item table cell 3</string>
        <key>bold</key>
        <true/>
        <key>font</key>
        <string>Segoe UI</string>
        <key>size</key>
        <integer>8</integer>
    </dict>

<key>1034</key>
<dict>
        <key>- loc hint -</key>
        <string>item table cell 3 (bold)</string>
        <key>bold</key>
        <true/>
        <key>font</key>
        <string>Segoe UI</string>
        <key>size</key>
        <integer>8</integer>
    </dict>

    <key>1021</key>
    <dict>
        <key>- loc hint -</key>
        <string>item track list 1</string>
        <key>font</key>
        <string>Segoe UI Semibold</string>
        <key>size</key>
        <integer>8</integer>
    </dict>

    <key>1022</key>
    <dict>
        <key>- loc hint -</key>
        <string>item track list 2</string>
        <key>font</key>
        <string>Segoe UI</string>
        <key>justification</key>
        <string>right</string>
        <key>size</key>
        <integer>8</integer>
    </dict>

    <key>1023</key>
    <dict>
        <key>- loc hint -</key>
        <string>item track list 3</string>
        <key>font</key>
        <string>Segoe UI</string>
        <key>justification</key>
        <string>right</string>
        <key>size</key>
        <integer>9</integer>
    </dict>

    <key>1024</key>
    <dict>
        <key>- loc hint -</key>
        <string>item track list 4</string>
        <key>font</key>
        <string>Segoe UI</string>
        <key>size</key>
        <integer>9</integer>
    </dict>

    <key>1001</key>
    <dict>
        <key>- loc hint -</key>
        <string>item grid 1</string>
        <key>bold</key>
        <true/>
        <key>font</key>
        <string>Segoe UI</string>
        <key>size</key>
        <integer>8</integer>
    </dict>

    <key>1002</key>
    <dict>
        <key>- loc hint -</key>
        <string>item grid 2</string>
        <key>font</key>
        <string>Segoe UI</string>
        <key>size</key>
        <integer>8</integer>
    </dict>

    <key>9002</key>
    <dict>
        <key>- loc hint -</key>
        <string>List Contents (Small)</string>
        <key>font</key>
        <string>Segoe UI</string>
        <key>size</key>
        <integer>8</integer>
    </dict>

    <key>9029</key>
    <dict>
        <key>- loc hint -</key>
        <string>List Contents (Small Bold)</string>
        <key>bold</key>
        <true/>
        <key>font</key>
        <string>Segoe UI</string>
        <key>size</key>
        <integer>5</integer>
    </dict>

    <key>1307</key>
    <dict>
        <key>- loc hint -</key>
        <string>playlists outline small font (selected)</string>
        <key>bold</key>
        <true/>
        <key>font</key>
        <string>Segoe UI</string>
        <key>size</key>
        <integer>3</integer>
    </dict>

    <key>1304</key>
    <dict>
        <key>- loc hint -</key>
        <string>playlists outline small font</string>
        <key>bold</key>
        <true/>
        <key>font</key>
        <string>Segoe UI</string>
        <key>size</key>
        <integer>7</integer>
    </dict>
Hope this helps.

How can I adjust the font size, etc., when completing a PDF form in Preview?

I would like to use Preview to fill-out or complete a PDF form. The default font that Preview uses when I begin typing in a field is too large. How can I adjust the font size. And while I'm asking, can I also adjust the font color, weight, emphasis, etc.?

Whilst in the Preview application, press "Shift - Command - A" (⇧⌘A) simultaneously to show the markup toolbar, or click View, and select "show markup toolbar". There is an icon "A" near the right hand side of the now visible markup toolbar, click this icon to reveal all the font options.

How can I Adjust the Page size while Iam printing wireless ?

How can I adjust the size if a photo While I am Printing Wireless Printer ?

Whilst in the Preview application, press "Shift - Command - A" (⇧⌘A) simultaneously to show the markup toolbar, or click View, and select "show markup toolbar". There is an icon "A" near the right hand side of the now visible markup toolbar, click this icon to reveal all the font options.

How can I adjust the clip speed in the editing window of Premiere Elements 11?

Similar Messages

Maybe you are looking for