How can I allow commenting in a certified document/

In Acrobat Pro 9, I created a certified document by selecting "Certify with out Visible Signature." I tried all three settings in "Permitted Changes after Certifying" but my PDF still does not allow commenting in Reader. The PDF allowed commenting before I certified it---how can I enable commenting after certification?

Tags are independent of PDF page content. Removing/deleting a page or page(s) does not remove anything in the PDF's structure tree.
As Full Check is looking at the structure tree the report reflects what is present there.
In the Tags panel walk the structure tree to locate the Table tags. Delete these.
Be well...

Similar Messages

  • How can I allow Contribute Users to save documents somewhere other than "docs"?

    Our website was rebuilt by an outside company, who took my file structure and dumped it into the new site (I use Dreamweaver and our staff uses Contribute for their little niche of the web). We have a large site with multiple folders within the site. Those folders have several folders below them to sub-divide the tons of info we have to keep straight. However when I set up the parameters for the Contribute users, I only seemed to have one option to save documents (the "docs" folder).
    I need for Contribute users to be able to save documents/files deeper in the file structure. How can I do that?
    Thanks for any assistance! I hope this made sense.
    Mark

    The answer depends on how "good" your Contribute users actually are. By default, Contribute always places documents in the same folder as the page in a "documents" folder. I see two potential options: (1) the user(s) needs to go to the where the document needs to live and place the link at that level or (2) you can show your user the "Publish File From My Computer" (under file, in the third section) which would allow them to place the document in the correct location and then link to it from whatever page is appropriate. Personally, that would be a last choice.

  • How can i allow comments adding to document?

    Hi,
    I am doing a web based system(servlet/jsp) that allows users to upload documents and to be able to view documents when needed. The problem is i do not know how to go about allowing users to make comments.By clicking on "Click to Discuss", it will open a txt file or something else,and all the comments that are added can be seen by all other users to allow simple form of discussion.Thanks in advance.
    [View in HTML]
    Title Author Source Comment
    How do repair a toyota motor? John c:\motor.doc [Click to Discuss]

    Take a look at this for information on reading files:
    http://java.sun.com/j2se/1.4.2/docs/api/java/io/BufferedReader.html
    Once the BufferedReader obj has been created, all you need to do is call the readline() methord:
    String str = in.readline();
    Then you need to process the string. The fastest way is probably to use regular expressions (again, /* comments will make this more difficult as well).
    You don't need to be able to write to a file (at least not after the original one has been uploaded to the server), just print out the string.

  • How can I allow other users on my macbook to view my iphoto library when th

    How can I allow other users on my macbook to view my iphoto library when they are logged in. I do not have a network, and the users (my family) all log in seperately when they use the computer. Does anyone know? Thank you.

    rdoss
    Welcome to the Apple Discussions.
    If you want others to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account(s). In the other account(s), enable 'Look For Shared Libraries'. Your Library will appear in their source pane.
    Remember iPhoto must be running in both accounts for this to work.
    Regards
    TD

  • How can i remove comments from the "tell your frie...

    How can I remove comments from the "tell your friends how you're doing" section?

    Please do a Skype reset.
    Exit Skype : From the system tray >> right click on the skype icon and click "Quit"
    Press WinKey+R
    Type: %appdata% and press Enter.
    Rename the folder "Skype" to "Old_Skype"
    Run Skype.
    You will need your password to re-log on, and re-set any options from default
    Regards,
    Tamim
    Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
    If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

  • How can you post comments during signal aquisition?

    How can you post comments during signal aquisition? For example, while acquiring your signal, you want to post a comment which the temperature reads at "30 seconds" from your relative start time (t=34 sec into recording)
    I have the LE package where events, alarms, etc cannot be used. Are there other ways that the user can mark an "event" during recording?

    Hey hkim,
    If you know how long it will be before you want a message to pop up you can simply include a sequence structure and in the first sequence have a wait time of your desired length and have the message pop up and display in the second sequence frame. 
    Hope This Helps,
    Doug B
    Applications Engineer
    National Instruments

  • How can I allow a user (client) to choose a local image file (on his hard d

    How can I allow a user (client) to choose a local image file (on his hard drive) and modify it using an applet from his browser ? I am trying to develop a web page that enables the user to choose an Image file, manipulate the image using a java applet, and display the results.
    Using Java�s �JFileChooser� does not work when called from a browser, probably due to security privileges issues. On the other hand, I can choose and upload any file using a JavaScript form:
    <FORM METHOD="POST" ENCTYPE="multipart/form-data" ACTION="process.asp">
    <INPUT TYPE=FILE NAME="file1"><BR>
    �
    It seems that I can choose an image file with a Java script form and process an image with an applet. How can I choose a file AND process it locally ?
    (I do not wish to upload the file to the server using JavaScript form and then back to the client�s applet for processing since it will be a tremendous waste of resources).
    Will appreciate any solution.
    Thanks !
    ( my email is: [email protected] )

    "Using Java�s �JFileChooser� does not work when called from a browser, probably due to security privileges issues. "
    You can do this if you sign the applet...

  • I'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games.

    i'm trying to use a madcatz controller on the mac but it turns on for 2 seconds and turns off. the system profiler picks it up as a xbox 360 gamepad but says its not been configured. how can i allow my self use this with my games!

    I have exactly the same problem.
    I'm a little peed-off with Microsoft on this. The original wireless controller I have doesn't work either since the cable I'm using is 'just' the charge and play cable, so a direct connection to my Mac won't work with this cable. It's a cable for god's sake. Why on EARTH put any limitations on this!?!?
    Next I learn I need an additional USB wireless receiver from Microsoft to get my original 360 controller to talk to my Mac. As I certainly don't want to fork any more microsoft dollars on this, this is not an option.
    Next I think, yes! I have a MadCatz 360 wired USB controller. This should surely do the trick just plugging it in and the way I go. But oh no, for some reason I plug my MadCatz Xbox360 controller in, it flashes a few times then switches off and can't be turned on again.
    The System Profiles recognizes it as a MadCatz 360 device controller but that is about it, but the ontroller software I download for the System Prefs (360Controller, USBOverdrive etc) don't even recognize the controller as being plugged in.
    What the **** Is The Microsoft Deal with all of this!?!?
    PS: Oh, and I forgot to mention, there are No drivers for device 4716 that I can find on the MadCatz website, or am I going blind?
    If anyone has a link, it would be appreciated.
    Message was edited by: nostrawaggus

  • How can I allow the application to line through a field that has been locked after being digitally signed?  We have multiple sections on a form with some fields being proposed information and other in another section having the approved information. once

    How can I allow the application to line through a field that has been locked after being digitally signed?
    We have multiple sections on a form with some fields being proposed information and other in another section having the approved information. once the approved information is entered we line through the proposed field so the data entry clerk won't pick up the wrong information.  However we are receiving an error when attempting to enter data  in the field which we have this edit.  Error property: line through cannot be set because doing so would violate the document permission setting.  any idea how we can get around this issue?

    You can control which fields are locked down after signing by setting up a collection. Then those that are not locked can be changed after signing. If this is not possible, then the line outs must occur prior to signing.

  • How can I allow a customer to upload an image to be stuck onto a mug or t-shirt and then view what it would look like on that mug or t-shirt?

    How can I allow a customer to upload an image to be stuck onto a mug or t-shirt and then view what it would look like on that mug or t-shirt?

    In the absence of drivers, a rather nasty way to achieve this would be to ensure that your software always occupies the same portion of the screen such that you know the position of the 'sample' button. You could then simulate a mouse click at those coordinates when you require a sample to be taken.
    This would not be a robust solution as a user could move or minimise the window, or other windows could also find their way into the critical position and cause the application to work incorrectly or cause unexpected things to happen.
    However, if you just need a short term work around this method might be acceptable, just be aware of the risks if you try it.
    Searching for simulate mouse clicks and having a play is the way forward.
    As an example of simulating a mouse click in a certain position, have a look here:
    http://forums.ni.com/t5/LabVIEW/Programatically-Se​lecting-a-ring/m-p/1463242#M557128
    Ian

  • How can I print comments in Numbers? I think was announced in the new features...

    How can I print comments in Numbers in the desktopt version? I think was announced in the new features but I can't see it.

    Add comments using the button in the toolbar:

  • How can I allow or block the use of local storage by specific sites for all users in my domain.

    How can I allow or block the use of local storage by specific sites for all users in my domain.
    I tried to do this by MMS.cfg but it is not working, the problem is also described in your blog "http://forums.adobe.com/message/3272907".
    What I Want -: "I want to allow youtube for all the users in my domain and this should be listed in Control panel-->flash player-->storage-->local storage setting by site-->websites tab."

    Wow, cor-el... Did you -intend- your reply to be inane, inappropriate and completely inapplicable?
    How would that possibly do what I asked?
    You -might- consider '''''reading''''' the question, -=before=- you reply. And it's really okay to NOT REPLY if you just don't know. Just an idea.
    Feel better, real soon.

  • How can put photo comment in Facebook in safari or other browser, am using ipad 4 and this was working perfectly but unfortunately it's not working now..the attach photo feature is there but can't attach, please help me in this

    How can put photo comment in Facebook in safari or other browser, am using ipad 4 and this was working perfectly but unfortunately it's not working now..the attach photo feature is there but can't attach, please help me in this

    How can put photo comment in Facebook in safari or other browser, am using ipad 4 and this was working perfectly but unfortunately it's not working now..the attach photo feature is there but can't attach, please help me in this

  • TS1702 I just paid ten dollars for an app called flash detect. It is a total scam ... I want my ten dollars back. How can apple allow these apps on their store???

    I just paid ten dollars for an app called flash detect. It is a total scam ... I want my ten dollars back. How can apple allow these apps on their store???

    You can try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that app and use the 'Report a Problem' link.

  • How can I import comments from shared reviewer who doesn't have acrobat pro?

    How can I import comments from shared reviewer who doesn't have acrobat pro? I sent out a shared review, but not all of the reviewers have acrobat pro, they do have acrobat reader 9 and have made comments on the document, but they do not appear when I open the shared review from the workspace. Can I import his comments so that they are apart of the shared review?

    I figured it out, so I will share just in case anyone else has this issue...
    The reviewer emailed me his comments on the document. I opened it and made a comment. When I went to publish my comment a dialogue box opended asking if I wanted to publish his comments to the shared review for him. Says yes and the reviewers comments are now published and a part of the shared review.

Maybe you are looking for