How can I alt tag the TOC button that appears at the top of the menu?

Running the current version of Cp7 on a windows 7 machine.
A 508 hang up once again: The customer insists on an active TOC for the project file. We've activated the TOC and it works fine, but there's a secondary TOC expand/collapse button located at the top of the slide right here:
Although I can change the icon for the expand/collapse TOC in the TOC setting menu:
I can't put an alt tag on the button, meaning that JAWS and other screen readers just reads it as an unnamed button - which would be "bad" if you're trying to pass a 508 compliance test - which I am. I know alt tags don't travel with the image file, and I can't find any way to access the file in Captivate to give it an accessibility name. Anybody have a workaround?
Justenuf

You can replace the current image with one of your own choosing.  But even if you make the replacement just a one pixel GIF, I think it will still register somewhere in the screenreader as a button. 
However, to be fair to Captivate, you can use the TOC button on the playbar to activate the TOC if need be, or you can set up on screen buttons to do that.
Personally, I wouldn't be using an overlay TOC at all.  I'd be trying for a Separate TOC so that it was available all the time.
However, I had read somewhere on this forum (a year or so back) about someone else finding that the links on the TOC itself were not completely 508 compliant.  So maybe you're just chasing your tail here if you're trying to achieve perfect 508 compliance.

Similar Messages

  • How can i unlock my granddaughter's iphone that one of her friends changed the password on and locked it? the phone is saying connect to itunes.

    how can i unlock my granddaughter's iphone that one of her friends changed the password on and locked it? the phone is saying connect to itunes.

    If disabled because of a passcode, and you have not synced AFTER setting the passcode, you will have to force the phone into recovery mode & restore it as a new device. All data on your phone will be erased:
    Turn your phone off. Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new. In your case, setup as "new" will be your ONLY option.

  • HT1386 My iOS isn´t in device on the left hand, how can find it? or is it that is not connecting properly to the computer

    My iOS isn´t in device on the left hand, how can find it? or is it that is not connecting properly to the computer

    You need to update to 10.6.8 using Software Update.

  • How can apple send out an os update that renders an important function of the software/hardware to not work? They knowingly have sent out this new os update for iPad which makes airplay nonfunctining! I need this for my business!

    How can apple send out an os update that renders an important function of the software/hardware to not work? They knowingly have sent out this new os update for iPad which makes airplay nonfunctining! I need this for my business!  I could understand if they didn't know, but it is all over the Internet! When I went in to have it revert back to os6 (which worked fine!) I was actually asked if I had done any research before I installed the upgrade! As if this is the consumer's fault for being dumb enough to fall for the upgrade!

    That is not what I have discovered, nor what others have discovered, nor what I was told when I went the Genius Bar.  I cannot remotely mirror to my MacBook Pro and it only started the day after I installed the upgrade.  We tested it with an iPad that had not been upgraded, no problem.

  • The minimize button  is the only button that appears !!!!!

    Hi all,
    I am writing a java application and I encountered a problem. In fact the JFrame under windows is working perfeclty but when I run it on a unix machine using cygwin some buttons of the JFrame don't appear such as the close button, in fact the only button that appears is the minimize button. Has anyone encountered this problem before?
    Thank You
    Regards

    Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

  • How can I create a background within a border leaving space at top of the page but fill to bottom?

    This is simply a skecth to hand a client but I can't get the bordered fill to fill the screen to the bottom. The Contact and Address are in the footer.
    Watched the "Defining a Background" video but it refers to the "Browser Fill" button and there is none on my version - v.5
    How is this accomplished?

    Hi Dennis,
    If I understand you correctly you are trying to have a footer block that is the width of the browser and with an image fill?
    If so,
    1: Draw out your rectangle (Keep it selected)
    2: Use the fill tool in the toolbar above (Yes, you do have on in V5)
    3: Once you have your rectangle filled grab the left and right edges of the rectangle and drag them to the edge of the canvas until a red line appears. This will make the rectangle full width.
    Hope that helps.

  • I originally set up my apple account by spelling my email address incorrectly.  how can i change it?  it says that i need to verify from the email they sent but the email address is incorrect!

    Help.  I need to change my apple account and don't have access to my old email, how can i change this - how do i verify that it is me.

    You set up email accounts on the iPad in Settings>Mail, Contacts, Calendars>Add Account. You have a choice of some of the most popular email providers in the setup list or you can select Other at the bottom.
    Tap on the provider that is applicable and begin the setup on the iPad.

  • Imovie 11 - how can I shared to idvd a project that I modified and finalized for the second time?

    I finalized a project (iMovie 11), shared with iDVD just as a test. Then I came back to the project, included A LOT of things, finalized again and when I shared to iDVD i just show the first finalized project. How can I work with my hole project in iDVD?
    I tried to save as my project, but there is not this option.
    Please HELP me. The old iMovie was much better. :-(.
    Tks a lot
    Gil

    Try first sharing to Media Browser from iMovie in the Large Size.
    After it is finished, you should be able to see it in the Media browser on the iDVD side of things. Drag it into a new project and continue working in iDVD.

  • I have a problem with safari, when I open new tab the tabs don't have the exit button that it used to be on the left corner of each tab and i used to close the safari with command Q witch is not working anymore ! what am I supposed to do ?

    how can I fix this problem ? I cant close the safari with command Q anymore and the tabs don't have the exit botton that used to be on left corner !

    Use cmnd+w to close the tab.

  • How do I get rid of the infuriating button that appears when I am scrolling?

    This button is apparently intended to speed up navigation within a document, website page, or email. In my opinion it appears unexpectedly, often overrides my input and causes me inconvenience. I don't want it, don't where it came from, don't know how to get rid of it. It's just more programmer masturbation, IMHO.

    Do you mean the button to autoscroll the page?
    *Tools > Options > Advanced > General: "Use autoscrolling"
    You get this auto scroll button when you middle-click with the mouse scroll wheel on a web page.

  • How do I get rid of a document that appears on desk top?

    A document appears on my desk top. How do I get rid of it?

    In some cases, Firefox's downloads folder may be set to your desktop. You can change the downloads folder here:
    (If you have the orange Firefox button, tap the Alt key to display the classic menu bar)
    Tools > Options > General
    If the file wasn't downloaded using Firefox, have you tried dragging it to the Recycle bin? Does Windows refuse to delete it?

  • In migration assistant, using a time machine backup, what is the extra data that appears after I deselect all the checkmarks under the user?

    When restoring a time machine backup using Migration Assistant, I'm given a choice of what to restore. If I click on a user, and I deselect everything(Desktop, Music, Movies, Documents, etc.) there is still 40 Gygabites of stuff. What is in the 40 Gygabites?!

    Is the HDD in the 2009 15" MBP dead?  (The original source of your data)  If not, you might want ot take it out and put it in an enclosure.
    You might try spotlight on know files to see if that gives you any clues where your data is located.
    You might down load from the Internet OmniDiskSweeper (free) and open it.  It should show you all of the files you have on your MBP and enable to locate them.
    Ciao.

  • Can I get rid of the TOC button on the playbar?

    My project is set up to have a TOC and for most of my project I use a TOC button with widget to open the TOC. I am also using the Playback control Pearl for a portion of my project. When in this section where the playback control is active if I choose the TOC button to skip to a portion of the project it keeps the playback control and TOC open even though those slides initially are set to not show the playback control or TOC unless a button is clicked.
    Any help on how to get rid of the TOC button on the playback control or to automatically hide this after you jump to a different part of the project?
    I am using Captivate 5.5 and Windows 7.

    Hi again!
    >> i was always of the idea that FOR BROWSE was to
    >> include the Yellow arrows !!!
    i was too
    now we all now that FOR BROWSE is move effective "bug-feature"

  • How can I easily create a browse button

    Hi all,
    How can I easily create a browse button that let the user select a file on his/her harddrive ?
    Greatfull for any suggestions
    Nongnie
    null

    Dead easy - Get_File_Name
    Regards
    Grant Ronald
    Forms Product Management

  • How to change the TOC button?

    Hi!
    I´d like to change the TOC button. In former versions its simply with four lines on it, with version 8 it´s labeled with "TOC". Can I get the lines back??
    And how do I change the label for bookmarks? (right beside the small bookmark icon it says "title", but I´d like to label it "content" or something else)
    Thanks!

    Still don´t know how to change the label for bookmarks in TOC ...
    But I found the solution for changing the TOC button: somewhere in the program folder are FLA-files for the different skins. Choose the FLA corresponding to your selected skin, open it with Flash and check the library for the button you want to change. Doubleclick in the library and create anew (I changed the "TOC" into three lines). Export SWF and then take care to put it where the original skin SWF is located. Voilá!
    Hopefully someone can tell me a way to change the label ;-)

Maybe you are looking for

  • Write-up depreciation of investment measure

    Hi, I have asset with investment measure. Is it possible to write-up the depreciation for last closed fiscal year ? How can i customize my system? The goal is to reduce the depreciation. Thank for your help.

  • Gallery problem with next/prev buttons

    Hi, I'm working on a photo gallery and I have some weird things happening, hence the request for help! When the gallery opens, you can click on any picture, the main one then appears with various buttons: 1. Click on the image and you go back to the

  • Travel management-- Control Parameters for Travel Expenses-- Define global

    We have setup provision variants for: India, UAE, Africa (since travel expenses in these countries need to be settled in the local currency). For each of the above variants, we have done the following settings in IMG node: Travel management-->Control

  • Enable bookmarks to be sorted alphabetically

    In IE you can right click on bookmark or a sub entry and choose' sort by name' to make the entries alphabetical. I think it would be great in FF It is on 'Bookmarks Toolbar' but greyed out

  • Browser showing the :80 port in the URL.

    This is confusing some of our users. Some users see www.blogtalkradio.com:80 when they go to our site. This only seems to happen to people on Macs. Never happens on a PC. Any idea why the port for the domain is showing in the browser? thanks, ROb