How can i assign permissions to all documents inside a document set ? - SharePoint 2013

Hi All,
     I have created some document sets and i did use a workflow to assign specific users to these document sets thinking this will cascade to files in the document set.
But it seems users cant see the files under the document sets as they don't have permissions.
Can i use a workflow to assign permission to all documents under the document sets? If yes will sharepoint designer do the trick.
Thanks in Advance

Hello,
The documents within your document should be visible if the security is not broken on the item level. If it's normal that the permissions are broken, take a look at the link provided before
but reading your post, I feel that you are surprise with this permissions break. You should maybe just take a look a the document creation process to see why the permissions are broken
Best regards, Christopher.
Blog |
Mail
Please remember to click "Mark As Answer" if a post solves your problem or
"Vote As Helpful" if it was useful.
Why mark as answer?

Similar Messages

  • How can I move an image/file around inside a document with text already in it?

    I'm learning In Design on the job, and it's a real challenge.  One big problem I'm having is, after I've placed an image inside a document with text in it, how do I place it precisely where I want it?  Sometimes I need the image flush to the left, and sometimes I need to center it.  When I place it, it doesn't land where I need it to be.  Things I've tried work sometimes but not other times.  I've tried going to Paragraph and reducing the setting to zero to move an image flush to the left of the text frame/column (I'm working with a three-column page).  Sometimes that works, and sometimes it does not.  When it doesn't, I've tried using the Selection tool to drag the image, but it doesn't respond.  Could someone give me an idea of what I'm overlooking?  I'm finding that InDesign has many settings, and all it takes is for one setting to be what it shouldn't be for things to go badly wrong.  I'm having other issues too, but in this discussion I'll stick to this.

    Sounds like you are anchoring the images in the text flow. That's fine if you need them to move along with text during editing, but is usually not required and often counter productive. If you place your images as separate objects in their own independent frames they can be positioned anywhere and moved at will. If they need to be anchored, consider using Custom Positioned instead of inline.

  • I created new users on my mac and my music, photos, etc. is still on the administrators account. How can I share them with all users?

    I created new users on my mac and my music, photos, etc. are all still on the administrators account. I tried making the other 2 new accounts administrators but that didn't work. How can I share them with all users?

    Read "iTunes: Setting up Home Sharing on your computer."

  • Purchased CC for business and can only assign one user. How can I assign more users to have it on all 4 computers in the office?

    Purchased CC for business and can only assign one user. How can I assign more users to have it on all 4 computers in the office?

    Hi there
    You would need to purchase a seat for each user.
    What you currently have is 1 seat = 1 user.
    Kind regards
    Bev

  • How can I assign a action to a button of the many scripts in the script file.

    How can I assign one action of many actions in a script file.
    I have many actions in a script file and I want to run one of them by clicking a button on the panel. However, loading the script I can not isolate the action that interests me.

    Hello,
    Try System Preferences>Energy Saver>Options tab, uncheck Allow power button to sleep computer.
    Some possible other options...
    Control-Eject
    The dialog box "Are you sure you want to shut down your computer now?" appears with options to Restart, Sleep, Cancel or Shut Down. After the dialog appears, press the R key to Restart, press the S key to Sleep, press the Esc key to Cancel, or press the Return key to Shut Down.
    Control-Command-Eject
    Quits all applications (after giving you a chance to save changes to open documents) and restarts the computer.
    Control-Option-Command-Eject
    Quits all applications (after giving you a chance to save changes to open documents) and shuts the computer down.
    Command-Option-Eject
    Puts the computer to sleep.
    Shift-Control-Eject
    Puts all displays to sleep.
    Power button (if the computer is not responding)
    Press and hold the power button on the computer for six seconds to shut down the computer.
    http://support.apple.com/kb/ht2448

  • How can we see status of all Requests at a time using any tables?

    How can we see status of all Requests at a time in the Info cube or ODS using any tables? what I am facing was while I run a Process Chain in some data targets red requests remains and due to this all other requests doesnot available for reporting.
    Now is there any T-Code or Table to view all requests in a single shot.
    Thanks in advance,
    Raj

    Hi Go for RSMONICDP give timestamp and u'll have it.
    Please assign points if useful
    Edited by: Aadil on Jan 21, 2008 7:43 AM

  • How can I assign image file name from Main() class

    I am trying to create library class which will be accessed and used by different applications (with different image files to be assigned). So, what image file to call should be determined by and in the Main class.
    Here is the Main class
    import org.me.lib.MyJNIWindowClass;
    public class Main {
    public Main() {
    public static void main(String[] args) {
    MyJNIWindowClass mw = new MyJNIWindowClass();
    mw.s = "clock.gif";
    And here is the library class
    package org.me.lib;
    public class MyJNIWindowClass {
    public String s;
    ImageIcon image = new ImageIcon("C:/Documents and Settings/Administrator/Desktop/" + s);
    public MyJNIWindowClass() {
    JLabel jl = new JLabel(image);
    JFrame jf = new JFrame();
    jf.add(jl);
    jf.setVisible(true);
    jf.pack();
    I do understand that when I am making reference from main() method to MyJNIWindowClass() s first initialized to null and that is why clock could not be seen but how can I assign image file name from Main() class for library class without creating reference to Main() from MyJNIWindowClass()? As I said, I want this library class being accessed from different applications (means different Main() classes).
    Thank you.

    Your problem is one of timing. Consider this simple example.
    public class Example {
        public String s;
        private String message = "Hello, " + s;
        public String toString() {
            return message;
        public static void main(String[] args) {
            Example ex = new Example();
            ex.s = "world";
            System.out.println(ex.toString());
    }When this code is executed, the following happens in order:
    1. new Example() is executed, causing an object to constructed. In particular:
    2. field s is given value null (since no value is explicitly assigned.
    3. field message is given value "Hello, null"
    4. Back in method main, field s is now given value "world", but that
    doesn't change message.
    5. Finally, "Hello, null" is output.
    The following fixes the above example:
    public class Example {
        private String message;
        public Example(String name) {
            message = "Hello, " + name;
        public String toString() {
            return message;
        public static void main(String[] args) {
            Example ex = new Example("world");
            System.out.println(ex.toString());
    }

  • There are hidden pages in the PDF form I have.  How can I see and print all without clicking on the

    I have hidden pages in the PDF form I'm using (but didn't create).  How can I see and print all the pages at once without clicking on the "next page" button.  In the initial view, there are four pages, but if I click the "next page" button, there are a total of 12 pages in this document.  This is three budget years, each year being 4 pages long.

    You're most likely dealing with a dynamic XFA form created in LiveCycle Designer. You can open it, click the button, and save it, and it will most likely be 12 pages when next opened, but it depends on how the form is set up. The ability to make edits to an XFA form in Acrobat is very limited, especially for dynamic forms, so things like flattening aren't possible.
    If it's not an XFA form, you'd still need to click the button at least once and save. To say for sure what's possible, I'd need to see the document. Can you post it somewhere?

  • How can we take backup of all the RDL'S existing at Report server dynamically at one time

    How can we take backup of all the RDL'S existing at Report server dynamically at one time ? I want to take backup of all the reports existing at the report server dynamically at one time only. currently I'm able to take backup of the reports folder wise
    using VBScript. and I have to pass the folder names again and again. I want this to be happened for all the reports of all the folders at single shot only using VBScript.

    Hi DineshRemash,
    Based on my research, we can store the following VB Script to a text file, then modify the file name extension from .txt to .rss.
    Dim rootPath As String = "C:\Reports"
    Sub Main()
    Dim items As CatalogItem() = _
    rs.ListChildren("/", true)
    For Each item As CatalogItem in items
    If item.Type = ItemTypeEnum.Folder Then
    CreateDirectory(item.Path)
    Else If item.Type = ItemTypeEnum.Report Then
    SaveReport(item.Path)
    End If
    Next
    End Sub
    Sub CreateDirectory(path As String)
    path = GetLocalPath(path)
    System.IO.Directory.CreateDirectory(path)
    End Sub
    Sub SaveReport(reportName As String)
    Dim reportDefinition As Byte()
    Dim document As New System.Xml.XmlDocument()
    reportDefinition = rs.GetReportDefinition(reportName)
    Dim stream As New MemoryStream(reportDefinition)
    document.Load(stream)
    document.Save(GetLocalPath(reportName) + ".rdl")
    End Sub
    Function GetLocalPath(rsPath As String) As String
    Return rootPath + rsPath.Replace("/", "\")
    End Function
    Then navigate to the folder contains the script, we can directly run the below command from the run menu:
    rs -s
    http://aa/ ReportServer -i download.rss
    We can modify the rootpath to point at whaterver fold you’d like to download the RDL files.
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • How can I quickly toggle through all of my open files in an application?

    How can I quickly toggle through all of my open files in an application? For instance, if I want to bounce back and forth between three documents that I have open in Microsoft Word?

    You use a combination of OS X Spaces with Exposé to be able to accomplish this.
    Or in your case,  look at using Mission Control
    http://support.apple.com/kb/HT4689

  • I have a 27" iMac with 16GB of factory installed SDRAM and 1T harddrive.  It is telling me the harddrive is full and is not functioning correctly.  How can I adjust so that all files are managed on the harddrive rather than the SDRAM.  (BTW - design flaw)

    Processor 3.4 GHz Intel Core i7
    Memory  16 GB 1333 MHz DDR3
    I have a 27" iMac with 16GB of factory installed SDRAM and 1T harddrive.  It is telling me the harddrive is full and is not functioning correctly.  How can I adjust so that all files are managed on the harddrive rather than the SDRAM.  (BTW - design flaw here.)
    Older Macs with a single Harddrive would simply expand OS management on the drive, and I think I understand the new Fusion Drive to do just that, but how do I get this product that I spent a great deal of money on to be more than a pretty screen?

    I was confused by this statement
    It is telling me the harddrive is full and is not functioning correctly.
    OS X manages ram and when you run out, it create swapfiles to extend your ram on the HDD (Hard Disk Drive). The OS itself, takes about 16 gig of space and that too resides on the HDD.  Your 16 gig of RAM is really a temporary space that holds things from the HDD so the processor can work on them.  There is no design flaw between your ram and HDD.  Something else is going on and there are a lot of smart people here to help you figure out what that "something else" is.
    I would do three things.  First I would create a backup, backups are important.  Second, I would reboot into recovery and repair my HDD.  Lastly while still booted in recovery I would repair permissions.
    Can you capture a screen shot of the exact error you are getting?

  • SNR License Issue. How Can I Disable SNR for all Users?

    Hi,
    I Have an issue with SNR on CUCM 10.5 and with assignement of license type
    I have a cluster with 400 users.
    200 users use ip phone 3905 and should be use an Essential License.
    When system check for assignement of license type , itassign a Basic License instead of an Essential License, because it see that users have SNR Enabled.
    All users in my system have SNR enabled, and I can not disable it. All my user have Enable Mobility unchecked, and all my phone have Device Mobility Off, but system however see SNR enable.
    How can i disable SNR for all users? This is a feature that client don't need.
    I dont' have a sufficent number of licenses for support all 3905 in Basic License.
    thanks for help.
    Andrea

    Well actually, Mobile Identity wouldn't apply to a 3905 unless those phones had another line on a Dual-Mode device like an iPhone or Android phone.  So unless you have either of those in your system you can scratch that idea.  Someone else may chime in here and try to help a bit more as RD/RDP are the main SNR culprits.

  • Nokia 6230i how can I assign a specific ringtone t...

    how can I assign a specific ringtone to a contact

    You cannot assign a ringtone to a contact on a 6230i but you can assign ring tones to the various groups of contacts.
    First of all, place contacts in various groups i.e. family, friends, work etc. etc., then assign ringtones to the groups.

  • How can I assign authorizations for the Flight list data?

    Hello,
    I am doing the Web Dynpro tutorial for calling BAPIs from Web Dynpro.
    I have finished it successfully but I don't get any data back. When I checked this BAPI with SE37 I receive a message "No Authorization" at the RETURN parameter.
    My question is: How can I assign myself these authorizations?
    I am not a BW person so a step-bystep explanation will be very helpful...
    Roy
    Message was edited by:
            Roy Cohen

    hi jaya....
    1. you need generate the table maintenance using the Menu Utilities->Table maintenance generator
    2. give the authorization group, package, function group, overview screen number etc.
    3.create the table maintenance
    4. now go to se93
    5. give custom tcode and say create
    then enter description , and then
    choose the radio button Transaction with parameters
    6. now enter tcode as SM30 and check the check box skip intial screen
    7. Check all gui support buttons
    8. now go down and enter VIEWNAME from F4 help and value as table name
    9. and add UPDATE(choose it from F4) and value as 'X'.
    VIEWNAME ZTABLE
    UPDATE X
    and save it, now check the Tcode.
    or
    use se80...create a transaction...click transaction with parameters and use SM30 as the basis....set VIEWNAME to the table's name and UPDate to X (no quotes)
    If you find it useful mark the points
    ~~Guduri

  • How can we identify what are all user exits are there for sales orders,deli

    Dear All,
    How can we identify what are all user exits are there for sales orders,deliverys and invoices
    thanks
    nitchel v

    Hi Nitchel
    There are many ways to find out the user exits..
    For example for VA01.
    Goto Transaction ie VA01:
    goto System-- Status
    doubleclick on the program name ie SAPMV45A
    SE38 -> Enter the program name and in the program( SAPMV45A) goto -- attributes
    get the package name from here ie VA
    note the package(VA) and get back to main screen
    goto SMOD tcode  and click on find button in the package spec giv the package name ie VA and execute it
    you will find list of exits available
    check out the exit that suits ur requirement
    goto cmod and create a new project and implement in that user exit.
    You will get the following exits in SMOD..
    SDTRM001  Reschedule schedule lines without a new ATP check
    V45A0001  Determine alternative materials for product selection
    V45A0002  Predefine sold-to party in sales document
    V45A0003  Collector for customer function modulpool MV45A
    V45A0004  Copy packing proposal
    V45E0001  Update the purchase order from the sales order
    V45E0002  Data transfer in procurement elements (PRreq., assembly
    V45L0001  SD component supplier processing (customer enhancements
    V45P0001  SD customer function for cross-company code sales
    V45S0001  Update sales document from configuration
    V45S0003  MRP-relevance for incomplete configuration
    V45S0004  Effectivity type in sales order
    V45W0001  SD Service Management: Forward Contract Data to Item
    V46H0001  SD Customer functions for resource-related billing
    V60F0001  SD Billing plan (customer enhancement) diff. to billing
    For Delivery you will get .. here the package name will be VL.
    V02V0001  Sales area determination for stock transport order
    V02V0002  User exit for storage location determination
    V02V0003  User exit for gate + matl staging area determination (h
    V02V0004  User Exit for Staging Area Determination (Item)
    V50PSTAT  Delivery: Item Status Calculation
    V50Q0001  Delivery Monitor: User Exits for Filling Display Fields
    V50R0001  Collective processing for delivery creation
    V50R0002  Collective processing for delivery creation
    V50R0004  Calculation of Stock for POs for Shipping Due Date List
    V50S0001  User Exits for Delivery Processing
    V53C0001  Rough workload calculation in time per item
    V53C0002  W&S: RWE enhancement - shipping material type/time slot
    V53W0001  User exits for creating picking waves
    VMDE0001  Shipping Interface: Error Handling - Inbound IDoc
    VMDE0002  Shipping Interface: Message PICKSD (Picking, Outbound)
    VMDE0003  Shipping Interface: Message SDPICK (Picking, Inbound)
    VMDE0004  Shipping Interface: Message SDPACK (Packing, Inbound)
    For Billing VF01..Package is VF..
    SDVFX007  User exit: Billing plan during transfer to Accounting
    SDVFX008  User exit: Processing of transfer structures SD-FI
    SDVFX009  Billing doc. processing KIDONO (payment reference numbe
    SDVFX010  User exit item table for the customer lines
    SDVFX011  Userexit for the komkcv- and kompcv-structures
    V05I0001  User exits for billing index
    V05N0001  User Exits for Printing Billing Docs. using POR Procedu
    V60A0001  Customer functions in the billing document
    V60P0001  Data provision for additional fields for display in lis
    V61A0001  Customer enhancement: Pricing
    Or another way is ..
    - Get the program name for that T-Code
    - Go to that program
    - In that program, search for word 'EXIT' or 'CUSTOMER-FUNCTION' by using where-used list which will give u the list of user exits for that program
    And also you can check in the tables in SE16 for user exits..
    MODSAP - Stores SAP Enhancements
    MODSAPT - Stores SAP Enhancements - Short Texts
    MODACT - Stores Modifications
    And there are other ways as well , pls check the forum for this ,
    Regards,
    Vvieks
    Note : If you have any specific requirement then pls let us know , we will guide you

Maybe you are looking for