How can I associate McBook Air and with iTunes

would you give me advice how to associate McBook Air with iTunes.
iTunes shows only iPhone, but not Air.
Maybe that is the reason why I can't  synchronize calender and contacts between Outlook and iPhone.

On your MacBook Air's iTunes, use the menu to go to Store > Authorize This Computer
Sign in with your Apple ID and password.
That should do it!

Similar Messages

  • My iPod Classic is seen by Windows but not by iTunes.  I have reset it, gone to disk mode and it won't show up in iTunes.  There appears to be music on it in a file called MUSICSAVE.  How can I get this to work with iTunes again?

    My iPod Classic is seen by Windows but not by iTunes.  I have reset it, gone to disk mode and it won't show up in iTunes.  There appears to be music on it in a file called MUSICSAVE.  How can I get this to work with iTunes again?

    1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
    2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
    3. Check the USB cable
    4 Verify that Apple Mobile Device Support is installed
    5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
    6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
    7. Check for third-party software conflicts.
    <Link Edited By Host>

  • How can we connect mac air and iPad to share all documents and downloads

    How can we connect mac air and iPad to share all documents and downloads?

    If you are referring to the "Documents" and "Downloads" folder in OSX, I suggest using https://www.dropbox.com

  • How can I sync my iPod classic with iTunes if I only have an iPad?

    How can I sync my iPod classic with iTunes if I only have an iPad?
    I recently downloaded music on my iPad via iTunes, but I can't get it to my iPod. Any help?

    You cannot. There is no iTunes application on an iPad and iPods cannot sync with an iPad.

  • How can i synch my new phone with itunes on my ipad?

    how can i synch my new phone with itunes on my ipad?

    Both the ipad and iphone are designed to be used with a computer.  Neither is a stand alone device.
    Both are intended to be synced to your computer.
    You should be syncing your ipad with a computer and the iphone.

  • I've update my music using an external disk; now I uploaded agin the music  but it doesn't appear in Itunes. How can I synchronize the music folder with Itunes?

    I've managed my music downloading and uploading it from an external disk; I put the music into the Finder MUSIC folder and copyed it into Itubìnes but it does't appear. What Do I have to do? How can I synchronize the Musice Folder with Itunes?

    Chris, thanks for the reply.
    That's what I'm confused about. I did exactly what you said. I copied the entire music folder from the old computer and put it in the music folder on the new computer. I've tried that two or three times now. And, I've checked, and all of the files are there (that's what I meant by 'clicking on Itunes Media'--when I click on the iTunes media folder in music/itunes in Finder, all of the files are there). But, when I open iTunes, nothing shows up--no movies, no music, no tv shows. It seems like it should be so simple, but it won't work for me.
    Any ideas?
    Thanks so much.

  • How can I repackage Adobe Air and updates to it in PKG format for deployment to Macs?

    We have about 200 Macs in our organization and do push deployments to them using JAMF Casper (which requires that installers be in PKG format).  I am periodically asked by our security department to apply updates to Adobe Air for security reasons.  So my question is  - how can I repackage the AIR installer and updates to PKG format so I can deploy them from Casper? 
    I've looked at Adobe Application Manager Enterprise Edition - and it doesn't even recognize the AIR installer as an Adobe installer.
    Any info you can provide would be much appreciated.
    Bob Reed
    AARP

    You might be able to do this by creating a bootstrapping application to launch the installer.  Here's some documentation on distributing AIR in enterprise environments along with a link to our distribution agreement.
    http://www.adobe.com/products/air/runtime-distribution1.html
    http://help.adobe.com/en_US/air/redist/WS485a42d56cd19641-70d979a8124ef20a34b-8000.html

  • How can I sync my iPod Classic with iTunes 11.1.4 and Windows 7 64-bit?

    After assistance from ‘b Noir’ (and losing--then finally regaining--my DVD/CD reader in the process), I finally installed the iTunes Version 11.1.4 update on my Windows 7 64-bit PC.  So I am again able to import music from CDs, play music on my PC with iTunes, and burn CDs as I could do with previous iTunes versions.  Then, however, I purchased some new music and tried to sync iTunes with my iPod Classic for the first time since the update to 11.1.4.  So far, I have been spectacularly unsuccessful.  Can anyone help me?
    With previous iTunes versions, sync was automatic when I connected iPod to a USB port.  Now when I connect iPod Classic to PC's USB port (I've tried two different ports), iPod’s screen says “Connecting” but iTunes doesn’t open.  And while iPod is connected to the USB port, I can't open iTunes by right-clicking its icon and selecting “Open.”   (ITunes, however, always opens OK if iPod is NOT connected).  With the iPod connected to a PC's USB port, I opened Windows 7 “Devices and Printers.”  Devices shown included both (a) the “Apple iPod USB Device” and (b) “Apple Mobile Device USB Driver.”  I right-clicked each of these device icons in turn and selected “troubleshoot.”  Both times, the report was “Troubleshooting couldn’t identify the problem.” 
    I am also unable to properly “eject” the iPod.  I tried ejecting (a) from the Windows taskbar's Notification Area, (b) from Windows “Devices and Printers” and (c) by right clicking the iTunes icon and selecting “Eject.”  Nothing worked, so I reluctantly pulled the cable out of the iPod without ejecting.  That causes a yellow triangle with an exclamation point to appear in “Devices and Printers” for my PC—which disappears after shutting down and rebooting the PC. 
    If I start iTunes and THEN connect the iPod Classic to the USB port, iTunes does nothing and almost instantly freezes (shows as “not responding” in Windows Task Manager and I have to close it via Task Manager). 
    Suggestions, please, on what I need to do?  My iPod Classic continues to work just fine, but I can't put any of my newly purchased music on it and I guess it will become an expensive paperweight if the battery happens to run down.  If nothing else, is there an old version of iTunes I can download somewhere that likely will work with the iPod Classic and my PC setup? Thanks so much!

    Hi turingtest2,
    Thanks so much for your response--yes, I've seen the TS1363 document.
    I was able to open iTunes, start the iPod Diagnostic Device Connectivity Test, and connect the iPod when prompted to do so.  The only problem reported by the diagnostic program was "No iPod, iPhone or iPad found." So it does seem as if the TS1363 document should apply.  But I have tried connecting the iPod after executing each of Steps 1, 2, 3, 5, 6, and 9 shown there and nothing has worked so far.  Details follow:
    --Went through the iPod Classic troubleshooting assistant--except I did not "reset" the iPod (because having all my "old" music available on the iPod has value to me).
    --Restarted iPod Service.
    --Restarted Apple Mobile Device Service.
    --Verified that the Apple Mobile Device USB Driver is installed.  There is no down arrow or question mark or other indication of problem with it.
    --Tried two different USB ports (I assume that is what is meant by "change your iPod's drive letter"?).
    --Temporarily disabled Norton Antivirus.
    For some reason, there are 368 files and 60 folders in the Temp folder under my user name, and it looks like at least some are "read-only."  Windows wouldn't let me delete or move the folder, even after I turned off Norton AntiVirus and closed the programs in the "Notification Area" that I could figure out how to close.
    I'm very reluctant to get into messing with Config files or registry keys.  And I have already tried uninstalling/reinstalling iTunes 11.4.1 so many times.  I'm not sure what to do but am considering uninstalling all of the Apple products (again) and try installing an older version of iTunes.  Or maybe I should try to install iTunes 11.4.1 on our Windows 8 laptop and see if the iPod will connect to that (although I really need to be able to sync to my desktop PC).  Probably won't have time to do either for a few days--too many other things to do.  But please let me know if there's something more that's relatively simple and low-risk I could try.  Thanks again!

  • How can I sync my iphone 3gs with iTunes?

    How can  sync My iPhone 3Gs with iTunes? My phone is activated, but not in service. It's connected to my computer and I have downloaded iTUNES onto my PC?

    Please use the confidential forums created for this purpose:
    iOS 5 beta

  • How can i sync my updated iphone with itunes 10.6

    I updated my iphone to iOS 6.0 and now it will not allow myiPhone to sync to my itunes 10.6, which is the updated version of iTunes that my mac lap top accomidates. How can I get to sync my iphone to my lap top???

    Doublechecking. Do you currently have iTunes 10.6.3.25 installed?
    A .dmg installer for iTunes version 10.6.3.25 for Mac OS can be found at the following download page on the Apple website:
    iTunes 10.6.3

  • How can I associate unique information/ variables with different instances of attachMovie when creat

    I'm creating an interactive animation of an experiment, whereby the user has to detect if there is an oil well lying beneath the surface by selecting and drilling a series of coordination points on a map.
    I've done the first stage by setting up a background image containing a grid of 20 x 20 coordinate points, eg columns 1 - 20 and rows A - T. Over the top of this, I've created a dynamic array of clickable objects (open circles) and the centre of each one is  placed over a coordinate point, so when you mouseover a coordinate point, eg C3,  an open circle becomes visible and when you rollout, it becomes invisible again.
    However, I'm stuck on the next stage. I need to be able to assign unique variables to one or more clickable objects (open circles). Is it possible to do that? For example:
    a)give grid point coordinates to each object (open circle), so for example if someone rolls over the C3 coordinate, the open circle (object) associated with that coordinate, a message will display: "Click on the grid point to drill at C3"
    b)assign a variable to one or more objects, so that when an open circle is clicked, the animation associated with that coordination point will be triggered. There will be different animations, depending upon which object (point is clicked)
    There are other variables that will need to be setup, but if I know how to assign variables to one or more objects, I can probably figure out the rest.
    Here's a copy of my code so far:-
    //set up grid for solid array
    spacing = 5.75;
    cols = 20; // number of columns in grid
    rows = 20; // number of rows in grid
    leftMargin = 154;
    topMargin = 169;
    depth = 100; // starting point for depth
    for (i=1; i<=rows; i++) {                                                                                                        
    for (j=1; j<=cols; j++) {                                                                                                         
    current = attachMovie("openCircle_mc", "openCircle_mc"+i+"_"+j, depth++);
    current._x = leftMargin + ((i-1) * (spacing + current._width));
    current._y = topMargin + ((j-1) * (spacing + current._height));
    //open circle initially invisible, visible on rollOver
    current._alpha = 0;
    current.onRollOver = function() {
               this._alpha = 100;
    current.onRollOut = function() {
               this._alpha = 0;
    Below is the background and a rolled over instance of the 'openCircle' object at 'C3'.
    I'd very much appreciate some help. Thanks very much.
    Pippa

    you can assign properties (and methods) to movieclips:
    //set up grid for solid array
    spacing = 5.75;
    cols = 20; // number of columns in grid
    rows = 20; // number of rows in grid
    leftMargin = 154;
    topMargin = 169;
    depth = 100; // starting point for depth
    for (i=1; i<=rows; i++) {                                                                                                         
    for (j=1; j<=cols; j++) {                                                                                                          
    current = attachMovie("openCircle_mc", "openCircle_mc"+i+"_"+j, depth++);
    current._x = leftMargin + ((i-1) * (spacing + current._width));
    current._y = topMargin + ((j-1) * (spacing + current._height));
    current.row=i;
    current.col=j;
    current.oil = Math.floor(Math.random()*1.1);  // about 1/10 objects have oil=1, 9/10 oil=0
    //open circle initially invisible, visible on rollOver
    current._alpha = 0;
    current.onRelease=function(){
    trace(this.row+" "+this.col+" "+this.oil);
    current.onRollOver = function() {
               this._alpha = 100;
    current.onRollOut = function() {
               this._alpha = 0;

  • HT204074 how can i associate my ipod shuffel with my itunes account

    i have an issue makeing purchases from the itunes store becuase i am using a new device so because of that i was prompted to answer my secret sequrity code and i dont remember the answers i provided so i was given the option of having something sent to my emailbut i no longer associte my self with that email so i called apple support and they said that they can help me if i put my ipod shuffle on my itunes account then they can help me a little more i know all my account info but my sequirty ? i made mi account december 2011 so unfortunetly i forgot i just brougth an itunes gift card to shop in the itunes store and i entered my password wicth was correct and every thing seemed fine and when i clicked buy on what i wanted it said i was useing a new computer so because of that i  am unable to shop if it is not possible to add the ipod shuffle to my account is there anything else i can do

    An iPod shuffle is not associated with an Apple ID in any way, so I don't understand what it is you're asking or being told. It's also very difficult to try and decode your post what with the total lack of punctuation. Please post back and explain in more detail - with punctuation, please - what it is you're having problems with. If you're having problems purchasing from the iTunes Store, as it seems from what I can glean from your post, that has nothing to do with your iPod.
    Regards.

  • How can I close an Air app with a key ?

    keyEnter = new Object();
    keyEnter.onKeyDown = function() {
      if (Key.getCode() == 69) // E,e = 69
           //other coding
          NativeWindow.close()
    Key.addListener(keyEnter);
    Does not work..

    Btw, I am using Adobe Flash CS4 AS2

  • How can I get paypal to work with itunes?

    I am having a problem with Paypal in general. I was thrilled when I saw that Paypal was a choice. So, I choose it for a payment option, verified all information and set up my preapproved payment account. For awhile everything was great. I bought music and podcasts with no problem. Then after trying to buy a song one day I was given a message that my account information has changed. I updated all my information (which I never changed in the first place) and that's when the problems started. I verifed all information with Paypal as well but when I click "Return to Merchant", I am directed to the apple website's itunes download page. I have already downloaded the latest version of itunes thinking MAYBE I needed to update. But still, no verification on the side of itunes that my account is active. Everytime I try to buy a song I am directed back to the page in itunes that I need to verify my paypal account. My account is active in paypal, but still I can't buy songs. I have verified my account information, I don't know how many times now in the past few days. I have emailed Apple support with my problem and have heard nothing back from them. I have been doing searches in discussions and have seen that paypal may not be the best choice for payment per so many problems customers are having. I feel I have no choice but to switch to a credit card if I want to buy anything in itunes. I think that if you offer a choice like paypal then it should be crediable. Apple really needs to take this choice away or fix it, and stop misleading customers into problems like this. It is really fustrating.
    Oh yeah, once I actually got into my account information and re-entered all my info (once again!?) and then I am given an error message "Form not complete....enter country". This confuses me to NO END. My country (USA) is clearly stated in the form. I mean, you have no way to change it, it's already there! ?*&#@! So, I click "Done" but itunes will not accept it. I get the same "enter country" error over and over. I have changed browsers(from IE to Mozilla and back again) and tried countless advice I have found while searching in Discussions to no avail. I have updated my information until my fingers are sore. I have verified my paypal account so many time that my email is full of confirmations from Paypal. I cannot understand why this is happening or how to fix it. Any advice would be appreciated.
    Thanks!

    1. Update iTunes to the latest version. Plug in your iPod. If iTunes still can't recognize it, then in iTunes in the top left corner click help> run diagnostics. On the box that comes up, check the last two things. Click next and it should identify your iPod.
    2. Click on your windows start menu. Type in "services". Click on it and when it pops up, on the bottom of it click on "standard". Now Scroll down to find "Apple Mobile Device" Right click it when you see it and click on "Start". When it has started, close iTunes and replug in your iPod and it should show up.
    3. Check the USB cable
    4 Verify that Apple Mobile Device Support is installed
    5. Restart the Apple Mobile Device Service and verify that the Apple Mobile Device USB Driver is installed.
    6. If you just want to add some photos, songs and movies from computer to your devices, you can use an iTunes alternative to do the job
    7. Check for third-party software conflicts.
    <Link Edited By Host>

  • How can i sync my iphone 4s with itunes in windows vista?

    i can´t sync my iphone with itunes

    Plug it in.
    Without more details about what does not work, that's about the best "solution" you are going to get.

Maybe you are looking for

  • Does anyone know a good photo gallery that I can use in contribute and easily add photos and new galleries?

    Looking for a good gallery that can be easily updated by the user in contribute. All the ones I have found are too complicated for the general user to add/edit photos

  • Bad Bind Variable

    Hi friend, I do want to use a trigger to update a varchar2 value: create or replace trigger WORK_STITCH_NAME_TRIG after insert or update on ASS_WORK_STITCH for each row declare NAME VARCHAR2(100); begin if inserting then select ENAME into NAME from U

  • Search in "form" and not only in spreadsheet...

    Hi, this Numbers is very great!! But there are 2 important features to add in "forms". 1. Most important is the possibility to search in a "form" and not only in spreadsheet. I don't know why they don't add this feature.... 2. Possibility to input th

  • LUMIX TZ7 movies import unsuccessful: is this normal in FCE4.0.1?

    I tried to make a search of my problem but not fully successfully. As said in the title , I have a lumix TZ7 that can record AVCHD movies: in spite of this, if I try to import them in FCE4.0.1, with the log and transfer function, they are readable bu

  • Database File Deployment

    Hello All, I created single user setup for windows application by adding database *.mdf file in my setup project and changed connection string as needed. It worked but it copied .mdf file in application folder after installation which anyone can acce