How can i authenticate my i pod more than 5 times using same id ?? is it possible ? and if not, then what is the solution?

as iam changing the os of my computer(windows) , i need to authenticate it again.

"Authenticate"?
Do you mean authorize?
Ipods are not authorized at all.  Authorization applies only to computers.

Similar Messages

  • How to deploy a Webapplication on WAS more than one times on same server?

    Hi all,
    I 've a special problem:
    In our web-app (some DC's) also stored propertie-Files. Now we would to deploy this application more than one times at same server using different WebContentRoots. (f.e. http://server/app1 and http://server/app2 a.s.o.)
    We know, that we must create different EAR-Projects and refer the web-Module and configure the application.
    But in the second application there it's recommended to change some properties.
    How we can handle this in JDI without copy the web-application?
    I hope my question can be understood.
    Best Regards
    Sven Rickelt
    Using Netweaver + WAS 6.40 2004 SP 13

    Hi Sven,
    as I'm new to NWDI, I cannot give you a 100 percent, field-tested solution. But have you already thought about using the Configuration-Adapter?
    If you can change the source of your web-app, you could maintain the data formerly stored in property files using the configuration adapter of visual administrator. The SC <a href="http://help.sap.com/saphelp_nw04/helpdata/en/45/e7e14b517b42788a1c166f9f32455e/content.htm">configuration</a> allows you to access this data.
    With this approach you can stick to one web-application and do the configuration work separately for each deployed application.
    Best regards,
    Frank

  • How can I change all of (or more than one) speaker note to a voice at once?

    Hello... 
       I have a lot of speaker notes that I need to apply a specific voice to.  How do I apply the same voice to all of the speaker notes in the whole project at once?  Or at least more than one?  Any help would be appreciated.  Thank you!   I am working with Captivate 6.

    Hi Vikram,
      Thanks. That tip definitely helps!  You just have to be careful when you use the CNTRL button and not highlight the name of the slide as you try to highlight the voices.  If you do that, then the drop down box becomes “unclickable”.  Unfortunately, when using the control button, it is sometimes impossible not to highlight the name of the slide as well.
    Ryan
    Von: VikramGaur [email protected]
    Gesendet: Donnerstag, 20. September 2012 16:25
    An: Scharfer, Ryan
    Betreff: How can I change all of (or more than one) speaker note to a voice at once?
    Re: How can I change all of (or more than one) speaker note to a voice at once?
    created by VikramGaur<http://forums.adobe.com/people/VikramGaur> in Adobe Captivate - View the full discussion<http://forums.adobe.com/message/4713463#4713463

  • How can I enter my podcast in more than one category?  Mine covers arts, education and society and culture, but is listed as "Performing Arts".  Thank you for your time!

    How can I enter my podcast in more than one category, to reflect the fact that it covers arts, education and society and culture?  Thank you for your time!

    You can have more than one category - this page shows you how the tags are formed:
    http://www.apple.com/itunes/podcasts/specs.html#category
    The Store will list only the first category and its sub-category at the top of the page. Like the first category, the others will in theory make your podcast available for searching by category. However searching just on the category in the iTunes Store is most unlikely to throw up your podcast. There are thousands of podcasts out there, and it would be quite impossible to display on one page the entire list for any category. What you see are 'featured' podcasts, chosen by Apple as being special; please see this Tech Note:
    http://www.apple.com/itunes/podcasts/specs.html#getfeatured
    Note that there is no way you can influence the selection other than making your podcast really special.
    If you have further questions about making your podcast it's better to ask them in the Producing Podcasts forum.

  • IOS obviously allows only 10 Apps to be Chosen in The "Open in" function. How can I control which Apps ( if more than 10 are installed) can be selected?

    iOS obviously allows only 10 Apps to be Chosen in The "Open in" function. How can I control which Apps ( if more than 10 are installed) can be selected?

    I think that is influenced by the order in which the apps are installed on the iPad (I believe that it's the most recent 10 ?) - but as I haven't got more than 10 apps that support any document/file type I can't check.
    If you want to able to edit the list, then you could try leaving feedback for Apple : http://www.apple.com/feedback/ipad.html

  • How can a file be accessed by more than one app?

    Hi,
    I am new to iOS4 and the whole iPhone, iPod technology. I am really a windows user.
    How can a file be accessed by more than one app. In my case I want to transfer a midi file from my PC to my iPod Touch and be able to open it from a couple of Midi Players which I am evaluating - or does each Midi Player have to import the file seperately for its own use?
    Thanks,
    Sam

    It seems to me that what you want is exactly a session bean will do. The EJB container is responsible to maintain a certain number instances (configurable) of your session bean and serve multiple clients at the same time. Session beans are not necessarily destroyed after serving a client. If you configure your ejb server to have a pool size of 2 to 100, then you will always have at least 2 instances (no more than 100 even there are a lot of client access) of this ejb ready to serve. The only thing not clear to me is that do you want to use only ONE instance of this bean or you don't care as long as multiple clients can access this bean's service? Since you mentioned that there is not a real database access, you can certainly use a Singleton but a 'regular' session bean with static fields should do it also if these fields will not be modified by clients.
    PC

  • How can I bought photoshop cc with more than 2 licenses

    how can I bought photoshop cc with more than 2 licenses

    Hi mercamas01,
    You may opt for Creative Cloud for teams which will allow you to purchase more than 2 licences.
    Please check this link: Creative Cloud pricing and membership plans | Adobe Creative Cloud (Business plan)
    Also, please refer to: Cloud technology | Adobe Creative Cloud for small & medium business
    Regards,
    Sheena

  • Do u guys know how can i dim my pc even more than original setings???

    do u guys know how can i dim my pc even more than original setings???

    Go to System Preferences > Displays and slide the brightness settings to something you like.
    PS - it does not help to post more than once; makes things too confusing.

  • I have two iphone one is iphone 5 and othere is iphone 4 . can i use same id for both ? And do i have to purchase the application again for iphone 4 which i have buyed for iphone 5.??

    i have two iphone one is iphone 5 and othere is iphone 4 . can i use same id for both ? And do i have to purchase the application again for iphone 4 which i have buyed for iphone 5.??

    You can use the same Apple ID for both phones, you would then be able to use the purchased Apps/Content on both phones without having to pay again.

  • How can I return files in Trash, more than 1 at a time? I can place many files into Trash at a time.

    I placed many unix.exe files into Trash, more than one at a time. I recently updated 'QuickTime' and the Mac version of 'SilverLight"
    (name might be totally 'correct). I don't know if removing these files can impede my iMac 2008 running OS 10.6.8(updated SnowLeopard).
    I know I can 'return' one file from Trash at a time. When I try to return more than one ('mouse click' and 'drag'
    over 2 or more files, the'return' option isn't listed. Is there a way I can either 'return all' or return more than one file
    at a time?

    Only one at a time. But where are they from? Did you delete system files or are these Windows files (.exe is a Windows extension?)

  • MGW: How to configure subscriber to try reconnect more than 16 time?

    In MGW we have registered a WMQ foreign queue and added a subscriber and a propagation schedule for INBOUND_PROAGATION. In general, everything seems to be working fine. We do successfully get messages from WMQ.
    However, admins restart WMQ every night. So, every morning when we come in we see this in the view MGW_SUBSCRIBERS:
    SUBSCRIBER_ID = SUB_WMQ2AQ_EFLDRTRANS
    FAILURES = 16
    LAST_ERROR_DATE = [today]
    LAST_ERROR_TIME = [around 5:20 AM]
    LAST_ERROR_MSG = MQSeries queue manager, MV17WA01, creation failed errorcode = 800
    We have found that if WMQ is restarted fast enough, before the subscriber fails 16 times, everything works fine again. Also, we have found that after 16 failures, all we have to do is reset the subscriber and everything works fine again.
    So, question: How can we configure the subscriber so that it tries to reconnect more than 16 times?
    TIA. ASD
    Edited by: user11135387 on Apr 1, 2011 5:17 AM

    hi,
    Suppose my form contains the following fields as:
    Project,Category,Start Time,End Time,Task Assigned,Task Description
    and I want to apply databank values for these fields
    Steps which i do are as follows.
    1. First of all i Configure the databank file as:
    Project,Category,Start Time,End Time,Task Assigned,Task Description
    and the values pass are :
    Orgnization Process,General,13: 00,14 : 00,test1,test2(in the first row)
    NMDGF,General,14:00,15:00,test3,test4(in the second row).
    2. After configuring the databank file i have to link with Script node. But since there are more than one fields so how i can link the csv file with script node?
    as for the single variable script node , i just substitute the value and link with the databank file its work perfectly fine and it add the folowing code in java code
    getDatabank("Timesheet Project").getNextDatabankRecord(); in the starting of run function
    3. So i have to add custom code for fetching the value for the next field? As I am not so gud in Java Code so what wil be the code to fetch the values for the next field from CSV file

  • How can we see status of all Requests at a time using any tables?

    How can we see status of all Requests at a time in the Info cube or ODS using any tables? what I am facing was while I run a Process Chain in some data targets red requests remains and due to this all other requests doesnot available for reporting.
    Now is there any T-Code or Table to view all requests in a single shot.
    Thanks in advance,
    Raj

    Hi Go for RSMONICDP give timestamp and u'll have it.
    Please assign points if useful
    Edited by: Aadil on Jan 21, 2008 7:43 AM

  • How do I make Lion Server support more than one Time Machine disk?

    Under Snow Leopard Server, I had two disks set up for Time Machine backups. This came about as I'm running a Mac Mini with the 500 GB internal drives which turned out to be insufficient for one of the connected Macs which uses a terabyte drive. I then added an external 6 TB drive and made it a Time Machine destination too. Worked beautifully. When I upgraded to Lion Server the external large drive was no longer available for backups and the interface for configuration within Server only allows for one drive to be in use at a time. Any suggestions (short on reverting to Snow Leopard) as to how to re-enable having both drives available for networked Time Machine access?
    Thanks!

    Hi Adam,
    Before I even realised that the Server app had a setting for TM, I just configured TM backups on my (SL) clients as I had done in SL.
    I shared the drive(s) on the server I wanted to use.
    For each client, I mounted the appropriate shared drive containing its sparseimage file, then set TM on the client to use that drive.
    Then I unmounted the shared drive and started TM.
    It mounted the remote drive (without displaying it in Finder) and opened the sparseimage, showing the "Time Machine Backups" volume on the desktop.
    So you could use any drive attached to the server to backup any client.
    It worked fine for me.
    In the end, I changed my clients to use the (single) shared "Backups" volume which Server.app creates because I can fit all my stuff on one drive.
    HTH

  • How can I share iPhoto libraries across more than one computer?

    I am trying to find a solution for multiple users accessing a single iPhoto library.
    I want to have just one "master" library for my family, which we can all access via different computers.
    I also want to apply the same principle of a "master" library for iTunes and iMovie, plus all our files/documents - see the original question here: https://discussions.apple.com/thread/4940803.
    Does anybody have any suggestions?
    Thank you

    iPhoto has never been designed as a shared network database. What you want to do is currently not supported, Jerry, sorry.
    Some things to consider - assuming you are using the most recent iPhoto version:
    iPhoto '11 will not allow to have the library be opened by more than one user at a time. It will lock the iPhoto library, if it is already in use.
    The iPhoto library needs to be on a disk, that is formatted MacOS X Extended (Journaled), otherwise iPhoto will not open it. Most network volumes have a different formatting.
    Network access is considerably slower than the access to a locally connected drive. You will have a noticable decrease in performance when working over the network. Editing the images will be no joy, if each and every access to the databases inside the library needs a network access.
    Since iPhoto is not specified as a network database, there is no built-in protection against network drop-outs and transmission errors when doing database transactions. You will be risking to corrupt your iPhoto library.
    Save sharing options would be:
    Let the iPhoto library be managed by one user, but give read-access to your family members using the "Sharing" preferences. You can share all albums or selected albums on your local network for browsing.
    Put your iPhoto library on a portable drive and let each family member use the drive in turn.
    Use shared Photo Streams to share your photos.
    This is Apple's recommendation on how to share a library:
    iPhoto: Sharing libraries among multiple users
    Regards
    Léonie

  • How can we create a table with more than 64 fields in the default DB?

    Dear sirs,
    I am taking part in the process of migrating a J2ee application from JBoss to SAP Server. I have imported the ejb project.
    I have an entity bean with 79 CMP fields. i have created the bean and created the table for the same also. but when i tried to build the dictionary, i am getting an error message as given below,
    "Dictionary Generation: DB2:checkNumberOfColumns (primary key of table IMP_MANDANT): number of columns (79) greater than allowed maximum (64) IMP_MANDANT.dtdbtable MyAtlasDictionary/src/packages"
    Is it mean that we can not create tables with fields more than 64?
    How can i create tables with more than 64 fields?
    Kindly help,
    Thankyou,
    Sudheesh...

    Hi,
      I found a link in the help site which says its 1024 (without key 1023).
    http://help.sap.com/saphelp_nw04s/helpdata/en/f6/069940ccd42a54e10000000a1550b0/content.htm
      Not sure about any limit of 64 columns.
    Regards,
    S.Divakar

Maybe you are looking for