How can I authorizing a Sony PRS-300 Reader?

My ebook account (Sony) was recently transferred to Kobo Books.  Some of the books I've purchased are Adobe DRM protected.  This didn't used to be a problem before the transfer.  I don't seem to be able to authorize my Sony reader.  Is there any way this can be done?
The PRS-300 came with ADE.  Adobe discontinued supporting this model of reader which effectively made it useless for ebooks protected by Adobe DRM.  Other models of the Sony Reader continue to be supported.  I find it hard to believe that this particular model was axed when the same, or a similar, fix could have been provided.  Shame on Adobe!

First of all, you should have used the Adobe DNG Converter 8.6, not an old, obsolete version.  Always use the very latest version.  8.3 was simply the first ACR version to support your camera model, that's all.
Note that the DNG Converter works only on folders, not on individual raw files.  Put all your Sony raw files in a folder and run the Converter on that folder containing the raw files.
I have absolutely no clue as to what on Earth you mean by : "upon reading the memory chip from Photoshop CS5".
You also need to make sure that CS5 is fully updated.  You cannot rely on the highly and notoriously unreliable Adobe auto updater to tell whether you have the latest update installed or not.
I still have no idea what platform you are on, Mac or Windows. Please read the following for next time:
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them, etc.,
someone may be able to help you (not necessarily this poster).
A screen shot could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Similar Messages

  • How do I authorize my Sony PRS-T1 WiFi so I can transfer my ebooks from my Authorized Digital Editio

    How do I authorize my Sony PRS-T1 WiFi so I can transfer my ebooks from my Authorized Digital Editions? The reader is not showing up in the left pane. I am using the USB cable. My operating system is Windows 7

    Is it showing up as an external drive or similar in Explorer?
    For most Sonys you need to install the Sony Reader software even if you don't want to use it.  It also installs a driver that is needed for the Sony to be recognized by ADE.  (Silly that that is necessary.  Sony make good hardware, but they have always let themselves down on the software side.)
    Some Sony's don't work well with ADE2.0 and Overdrive library books.  If you have an issue there, try installing 1.7.2 instead.
    Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
    http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
    The forum software is sometimes corrupting the link above.  There shouldn't be a blank in 'editio ns.html'.  The following redirects to the same page: http://tinyurl.com/diged172

  • Sony PRS-300 ereader not working with Lion

    Hello
    I updated to OS Lion on 20 July and now find that my ereader (Sony PRS-300) is not recognised by my Mac when I plug in the USB.
    It worked perfectly before!
    Am unable to locate any help on the Sony site and the problem only occirred after installing Lion.
    Anyone have any ideas to solve it?
    Yours in hope
    K

    Sony reader not working after updating to Lion OS.?
    How do I get my sony reader to work on lion os ?
    Fix now avalible for UK
    http://support.sony-europe.com/computing/prs/prs.aspx?site=odw_en_GB&m=PRS-650
    Just pick model then os download
    USA fix.  http://esupport.sony.com/US/perl/select-system.pl?model_type_group_id=6
    pick model number from left then click  DRIVERS AND DOWNLOADS...... Enjoy
    Angus Cooney

  • How can I process a Sony A7 RAW file into Photoshop CS5.

    How can I process a Sony A7 RAW file into Photoshop CS5.  I tried the file DNG converter 8.3, but it did not work.  I was able to download it, but upon reading the memory chip from Photoshop CS5, it reads the jpg files fine, but not the RAW files.  I thought the DNG converter 8.3 was the right file, but apparently it is not.  Perhaps I need to do something in Photoshop CS5 to initiate it, or place it in a particular directory.. Please help.

    First of all, you should have used the Adobe DNG Converter 8.6, not an old, obsolete version.  Always use the very latest version.  8.3 was simply the first ACR version to support your camera model, that's all.
    Note that the DNG Converter works only on folders, not on individual raw files.  Put all your Sony raw files in a folder and run the Converter on that folder containing the raw files.
    I have absolutely no clue as to what on Earth you mean by : "upon reading the memory chip from Photoshop CS5".
    You also need to make sure that CS5 is fully updated.  You cannot rely on the highly and notoriously unreliable Adobe auto updater to tell whether you have the latest update installed or not.
    I still have no idea what platform you are on, Mac or Windows. Please read the following for next time:
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them, etc.,
    someone may be able to help you (not necessarily this poster).
    A screen shot could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • How can I connect a Sony DCR-PC110 video camera with iMovie and import my videos?

    How can I connect my Sony video camera DCR-PC110 with iMovie in order to import my old videos?

    Hi
    This Camera has three types of ports.
    - Analog-out
    - USB
    - I.Link = FireWire = IEEE1394 = Digital in/out = DV-terminal
    And Your Camera only can send Photos via the USB-connection - NO VIDEO.
    So You Must get a FireWire Cable and eventually a ThunderBolt/FireWire converter Cable to get Import to work.
    There are no real way around this.
    Yours Bengt W

  • HT201303 how can i authorized again my laptop for my ipad..... i cant see the edit portion to authorized it... thank u

    how can i authorized again my laptop for my ipad..... i cant see the edit portion to authorized it... thank u

    Welcome to Apple Support Communities
    To authorize a computer with iTunes, open iTunes and go to Store menu (on the menu bar, at the top of the iTunes window) > Authorize this Computer.
    If you are using iTunes 11 for Windows, you may not be able to see the menu bar, so press Alt and S keys

  • How can I configure ReFS to NOT fail read operations when a checksum error is detected (on non-Storage-Spaces volumes where data integrity streams are enabled)?

    According to William Stanek, in his Windows Server 2012 R2 Inside Out: Configuration, Storage & Essentials book, this is apparently possible: (pg. 615 - here it is on Google Books: https://books.google.ca/books?id=0IyfBAAAQBAJ&pg=PT819&lpg=PT819&dq=read+operation )
        Integrity can be enabled when the system is not running on Storage Spaces. When
        integrity is enabled and ReFS detects a checksum mismatch, ReFS logs an event and
        fails the read operation by default. If you don’t want the read operation to fail, you
        can configure ReFS to continue with the read operation. A related event will be logged
        regardless.
    So then how do I configure it to do that???
    (And just to make it super-clear, I'm NOT using Storage Spaces, so there is no redundancy via mirroring/parity, and I'm not expecting any file repair - just detection of corruption. It's just a basic volume formatted with ReFS and
    with integrity streams enabled, via format E: /fs:ReFS /i:enabled
    For those who want more details, here's the situation: 
    I try to perform a read operation on a file with corrupted data (purposely done for testing using a low-level disk editor), I get a the following error message:
    And an event ID 133 from ReFSv1 gets logged in the System log:
    Clicking "Try Again" just brings up the same message, and clicking "Skip" skips the operation entirely.
    This is indeed the correct default behaviour.
    What I want instead is for the read operation to be allowed to complete, with corrupt data and all, and ONLY for the event to be logged. And according to William Stanek, this is supposed to be configurable somewhere - and after hours of searching, I haven't
    been able to find anything.

    Hi Tommy,
    >>How can I configure ReFS to NOT fail read operations when a checksum error is detected
    We can use PowerShell command Set-FileIntegrity to configure this. The specific parameter for controlling this behavior is
    -Enforce <Boolean>which indicates whether to enable blocking access to a file if integrity streams do not match the data.  
    Regarding this point, the following article can be referred to as reference.
    Set-FileIntegrity
    https://technet.microsoft.com/en-us/library/jj218351.aspx
    Best regards,
    Frank Shen
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • How can I Cache the data I'm reading from a collection of text files in a directory using a TreeMap?

    How can I Cache the data I'm reading from a collection of text files in a directory using a TreeMap? Currently my program reads the data from several text files in a directory and the saves that information in a text file called output.txt. I would like to cache this data in order to use it later. How can I do this using the TreeMap Class? These are the keys,values: TreeMap The data I'd like to Cache is (date from the file, time of the file, current time).
    import java.io.*;
    public class CacheData {
      public static void main(String[] args) throws IOException {
      String target_dir = "C:\\Files";
      String output = "C:\\Files\output.txt";
      File dir = new File(target_dir);
      File[] files = dir.listFiles();
      // open the Printwriter before your loop
      PrintWriter outputStream = new PrintWriter(output);
      for (File textfiles : files) {
      if (textfiles.isFile() && textfiles.getName().endsWith(".txt")) {
      BufferedReader inputStream = null;
      // close the outputstream after the loop
      outputStream.close();
      try {
      inputStream = new BufferedReader(new FileReader(textfiles));
      String line;
      while ((line = inputStream.readLine()) != null) {
      System.out.println(line);
      // Write Content
      outputStream.println(line);
      } finally {
      if (inputStream != null) {
      inputStream.close();

    How can I Cache the data I'm reading from a collection of text files in a directory using a TreeMap? Currently my program reads the data from several text files in a directory and the saves that information in a text file called output.txt. I would like to cache this data in order to use it later. How can I do this using the TreeMap Class?
    I don't understand your question.
    If you don't know how to use TreeMap why do you think a TreeMap is the correct solution for what you want to do?
    If you are just asking how to use TreeMap then there are PLENTY of tutorials on the internet and the Java API provides the methods that area available.
    TreeMap (Java Platform SE 7 )
    Are you sure you want a map and not a tree instead?
    https://docs.oracle.com/javase/tutorial/uiswing/components/tree.html

  • How can I tell if my message is read or delivered?

    How can I tell if my message is read or delivered?

    email message? Can't.
    SMS text message? Can't.
    iMessage? Have the receiver enable Send read receipts in Settings > Messages.

  • How can I activate/registrate my e-book reader afterwards.

    How can I activate/registrate my e-book reader afterwards.
    digital editions has been downloaded and the computer is registrated with the Adobe-ID, but I have to registrate the e.boo reader too and don`t know how to do afterwards.

    Use the forum for Adobe Digital Editions:
    http://forums.adobe.com/community/adobe_digital_editions

  • Two gmail accounts set up in outlook thru google sync. how can i see both of them in reading dashboard

    Two gmail accounts set up in outlook thru google sync. how can i see both of them in reading dashboard. I want to see bothe accounts with all folders on dashboard

    Hi,
    Since the issue is on Outlook through Google Apps Sync, I don't have the environment to test it for you, the support that I can provide is limited.
    Anyway, I still want to know, what did you refer to by "dashboard"? Do you mean the Navigation Pane on the left side?
    Regards,
    Melon Chen
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • How can I receive email delivery receipts or read receipts on Mail, OS X?

    How can I receive email delivery receipts or read receipts on Mail, OS X?
    Thanks!

    See here: http://email.about.com/od/macosxmailtips/qt/et_request_recp.htm
    Not sure if it works in Mountain Lion.
    Note that those only work if your recipients have allowed it to happen.
    Also, Mail will not respond to them at all.

  • How can i open the directory/​folder and read all the files inside it in order and then close it?

    How can i open the directory/folder and read all the files inside it in order and then close it? any example would be nice.
    thanks

    In the File I/O>>Advanced File Functions Palette is a function named "List directory". This function will give you two arrays. One contains the names of all subdirectories the other the names of all files. If you want to sort them by name use the array sort function. If you want to sort them by another attribute use the File/Directory Info function to get more data. Use a cluster which contains the attribut to sort and the original index of the name. Then sort this array.
    Waldemar
    Waldemar
    Using 7.1.1, 8.5.1, 8.6.1, 2009 on XP and RT
    Don't forget to give Kudos to good answers and/or questions

  • Have a canon dc310 camcorder that uses mini dvd's. How can I get my new Imac to read these dvd's?Camcorder unable to connect to computer. Will a mini dvd adapter work or do I need to purchase an external dvd rom device? Which device works well with a mac?

    I have a Canon DC310 camcorder that uses mini dvd's and doesn't have the ability to connect to a computer.  How can I get my new Imac to read these dvd's?  Will the mini dvd adapter work or do I need to purchase an external dvd rom device?  Which device works well with the Mac?  Do I need anything else to get the dvd material onto my mac?  Thanks!!

    No DV port in camcorder.  Just a yellow AV port/hole.  I did find a Canopus ADVC110 device in a box that was bought several years ago to convert VHS tapes onto DVD's.  Can I use this with a Mac?  Could I connect a dvd player to the Canopus and transfer the disks onto my Mac?  Or, connect the camcorder via AV port to the Canopus and that to the Mac and transfer that way?  Thanks again!

  • How can I download complete Version of Adobe Reader for offline installation?

    How can I download complete Version of Adobe Reader for offline installation?

    From http://get.adobe.com/reader/enterprise/

Maybe you are looking for