How can I avoid query result overlapping in Analysis for Office?

Hello everybody
I have a question relating to Analysis for Office. If I've a workbook with for example two queries, how can I avoid that the query above the other one overlaps the query results of the lower query?
The lower query result should adapt according the the query results of the first query.
Does anybody have an idea? In Bex Analyzer I have the Option to insert a scrollbar for a workbook- is this function available in Analysis für Office? (But that way isn't the way I prefer).
Thank you in advance.
Kind regards
Heike

Not sure about this - could you take a look at this thread that suggests VBA Placing two tables in Analysis for office without overlap
I am wondering if the next release might help? See Figure 1 of Analysis Roadmap Update - Beta Preview, Part 2

Similar Messages

How can I get required result

How can I get bellow result...
For row 1 in Table X: There should be one row in result table.
For row 2 in Table X: These should be 2 rows one for each package code
For rows 3 and 4: The X table should be joined with Table Y and create the # of rows depending on the # of Section codes that are in the range of B01M-U01M and B04F-U04F. These are just some sample rows, they code be several rows with the above scenarios in those tables.
Table X
Grp_#
Grp_Name
Package num
Product #
111
aaa
123
PPO
222
bbb
002, 007
EPO
333
ccc
108-B01M-U01M
CMM
444
ddd
008, 128-B04F-U04F
PPO
Table Y
ID
Grp_#
Pkg_cd
Section_num
1
333
108
B01M
2
333
108
E01M
3
333
108
U01M
4
444
008
B04F
5
444
008
D04F
6
444
008
M04F
7
444
008
U04F
8
444
128
B04F
9
444
128
C04F
10
444
128
U04F
11
111
123
B01E
12
222
002
B01G
13
222
007
M04G
Result Table
Grp_#
Grp_Name
Package num
111
aaa
123
222
bbb
002
222
bbb
007
333
ccc
108-B01M
333
ccc
108-E01M
333
ccc
108-U01M
444
ddd
008-B04F
444
ddd
008-D04F
444
ddd
008-M04F
444
ddd
128-B04F
444
ddd
128-C04F
444
ddd
128-C04F
444
ddd
128-U04F
Thanks in advance.
Thanks
Pathan

I am very sorry, please ignore this mail..... I have pasted more thread. I am unable to paste table format over here.
Thanks
Pathan

How can i have Query trace results in a table format?

How can i have Query trace results in a table format?

Are you referring to reading the trace files generated under udump folder?
Well, you can make use of external tables, but you really need to be a master in understanding that cryptic data.
Check out following link for an alternative.
http://www.oracle.com/technology/pub/articles/gallagher_tfm.html

How can I export the results of a query?

After executing a select statement I can see the results in a grid but how can I export the results (the data)?
How can I export the results of a join of two or more tables?

Right click in the results grid and select the Export menu option

How to use one query results in another query

hi,
in help.sap I have founded that using variable type replacement path I can use one query results in another query. It is wrote there that I have to choose query name results I want to get in variable definition but I do not know where.
How I can do this?
Result I want to get is:
In one query I have material prices in another material quantities. I want to calculate inventory value (price * quantity). Moreover prices are on plant level, quantities on storage type level. Plant is atribute of storage type.
Can I do this?
Regards,
Andrzej

Hi Andrzej,
please check out this thread: Set parameters values depending on other parameters
I had a discussion about query results as input for another query in there.
For creating a workbook, just click on the save button after you ran your query in the bex.
Siggi
Message was edited by: Siegfried Szameitat

How to output a query results into a text file

How to output a query results into a text file instead of outputing it to the screen..
is there a way for us to write a SQL query which specifies to output the query results to a text file.
Pls let me know how to do it
Thanking u in advance
regards
Muraly

Muraly,
If you are using SQL*Plus 8.1.6 or later, you can also spool output to a file in HTML format, eg
SET MARKUP HTML ON SPOOL ON PREFORMAT OFF ENTMAP ON
SPOOL c:\temp\report.html
SELECT DEPARTMENT_NAME, CITY
FROM EMP_DETAILS_VIEW
WHERE SALARY>12000;
SPOOL OFF
SET MARKUP HTML ENTMAP OFF
In iSQL*Plus 9.0.1 (the browser-based interface to SQL*Plus) onwards, you can also send the HTML output to a new web browser window, or an html file -- much easier than the command line method.
Alison

How can we avoid duplication of records in database while inserting records

Hi,
In my scenerio,while inserting the same records through idoc duplication of records is happening in database.How can i avoid this.

Divya,
First its a wrong data, because you cannot have the same data for any condition. Probably its a data problem. Please check with the datbase team and ask them why is it so? They should handle on their end.
Anyways if the above dont work and if you ahve duplicate records then probably you need to come up with a query using select distinct. If this doesnot work then if the duplicates comes into mapping, you might selecting some fields which are common. So you can use a splitbyvalue(on value change) for those records, so even if there are three records it takes only one record. If you have 4 or 5 common values then you can concat them and then use the splitbyvalue change.
Else an adapter module should help you out in sender comm. channel after picking the records.
For an idea can you rajs response in this thread:
Duplicate records
Regards,
---Satish

How can i avoid iPad?

How can i avoid iPad 1 crashes?

What are you doing when the iPad crashes?
What version of iOS are you running on the iPad?
If there is an error message, what is the exact wording?
What troubleshooting have you done? What were the results?

How can I avoid merging failures?

Hello,
I select several overlapping vectors shapes and click merge in the pathfinder to merge them but often some parts fail to merge.
How can I avoid this? Why does it work sometimes and not others? Is there something I should do before clicking on merge?
Thanks in advance,
SG

Ok, this one was tricky.
First thing, the tool :
it seems you're using this tool (don't have the english name) when the top left should be better and works.
Now, what's wront in your file : if i give a stroke value, the top one has a stroke brush attached to it.
I could spot a complex appearance in the layers panel,
but didn't see it before giving a 1pt stroke color, where it became obvious :
Voilà

Some snaps show up as black screens when I try to view them as single pictures.Even when I run them in slideshows they show up as black screens.These are jpeg files.How can I avoid this happening?

Some snaps show up as black screens when I try to view them as single pictures.Even when I run them in slideshows they show up as black screens.These are jpeg files.How can I avoid this happening?

There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

/ddd tags What does mean? And How can I avoid it?

I am using SharePoint 2010, after the crawling process runs. When using the search into the SharePont I see the </ddd> tags in some to of the metadata fields associeted to the documents results.
I would like to know how can I avoid that.
Thanks
Regards,
Gustavo.

Hi,
Here is a similar thread for your reference:
Substring xsl hithighlighted summary in SharePoint
http://stackoverflow.com/questions/4947443/substring-xsl-hithighlightedsummary-in-sharepoint
More information:
http://technet.microsoft.com/en-us/library/gg193926(v=office.14).aspx#feedback
Best Regards
Dennis Guo
TechNet Community Support

How can we restrict EQL result based on session value

How can we restrict EQL result based on session value or by checking with EBS secured function?
Example: I create a Item Search Dashboard but I have more than one inventory organizations and I want to restrict dashboard to bring inventory org respective data by validating responsibility/profile option.
Can anyone help me on this or if my concept is wrong so can anyone please guide me?

Hi Bob,
Thank you. Sorry for the late reply but I was busy in other stuff. I did the jar file and copied that Jar file into .ear/APP-INF/lib and copied on server and updated the df.securitymanager property under framework settings on Endeca Studio and restarted Endeca Server and Studio but seems like my class didn't get read. Kindly suggest and find below snippet of code;
public void applySecurity(PortletRequest request, MDEXState mdexState, Query query)
throws MDEXSecurityException
init(request);
String remoteUser = request.getRemoteUser();
String recordFilterExpression = "XX";
if(recordFilterExpression != null) {
DataSource ds;
try {
ds = new DataSource(request, mdexState.getId());
try {
ExpressionBase expression = ds.parseLQLExpression("FND_USER_NAME='" + remoteUser + "'");
DataSourceFilter dataSourceFilter = new DataSourceFilter(expression);
} catch (Exception f) {
throw new MDEXSecurityException("Unable to apply Expression", f);
} catch (DataSourceException e) {
throw new MDEXSecurityException("Unable to create DataSource", e);

How Can I Avoid mistakes in the bounce?

When I bounce my track, probably because there are many and many things, the track that comes out from the project has many mistakes (for istance, if there is a track that should start at a certain point, it starts with some delay) How can I avoid these mistakes?
Thank you

I don't have the patience for real time bouncing, just to make quick mp3s to send to my collaborator. However when I bounce, I sometimes have notes missing. A second bounce usually turns out better. I used to think that doing the same thing over and expecting different results was an indication of madness. Not this time.
I haven't noticed delays though, yet.
These happened using LP X 10.02 and an external Plugin. Perhaps 10.03 will work better.

How can i display the result of java class in InputText ?

Hi all,
How can i get the result of java class to InputText Or OutputText ???
also can every one in the forum give me road map for dealing with java in oracle adf because i'm beginner in oracle adf
i saw some samples in oracle adf corner but it's difficult for me.

User,
Always mention your JDev version, technologies used and clear usecase description (read through this announcement : https://forums.oracle.com/forums/ann.jspa?annID=56)
How can i get the result of java class to InputText Or OutputText ???Can you elaborate on your requirement? Do you mean the return value of a method in a class as output text? Or an attribute in your class (bean?) as text field?
-Arun

How can I insert Query in a Workbook

Hi,
I am new in BI 7.0. I am trying to insert a query in a workbook. but the tools button is not giving me the option to insert query like 3.X
How can i insert query in 7.0
Can anybody please give me the step by step instruction.
Thanks in Advance

1. Open BEx ANalyzer.
2. Create new excel workbook by hitting the "New" icon in Excel.
3. Logon to a backend BI system.
4. Click the design mode icon.
5. Put your mouse on a cell and insert a table.
6. Assign a dataprovider to this table.
7. Switch off design mode.
Hope it Helps
Chetan
@CP..

How can I avoid query result overlapping in Analysis for Office?

Similar Messages

Maybe you are looking for