How can I batch process 4 diff image sizes from 1 master?

Hi there
What I would like to do is create 4 separate image files of varying sizes (large, medium, small & extra small) from one master image. I would need the ability to name each file individually too, ie. picture1_large, picture1_medium etc
I have a few thousand files to process so ideally a solution that I didnt have to keep checking on would be preferable. I know I can create a batch process for one size but its creating the four diff sizes in a batch which im finding difficult to work out.
any help would be much appreciated
Jim

Simply drag the entire folder through Bridge—or even individual files—the invisible xmp files containing your adjustments will automatically and invisibly travel along with the image files, as long as you do it within Bridge, not through the OS.
Otherwise, you would need to set your Mac OS to always make invisible files visible, and you don't want that hassle.
Just use Bridge to move files around or to copy them to a new folder.
Incidentally, there's a dedicated Adobe Bridge forum:
http://forums.adobe.com/community/bridge?view=discussions

Similar Messages

How can you find out an individual image size from multiple images on a canvas

This is probably a really really simple question but I can't for the life of me find how I can find out an individual image size from multiple images on a canvas. eg I have 3 photos i want to arrange 1 large and the other two next to it half the size. How can I edit individual image size on the canvas as when I select the image on a sperate layer I want to resize it just resizes the entire canvas and not the individual image
Thanks

I want to know they exact dimensions though. You can get them by dragging to the 0,0 corner and then reading off of the ruler scale on the sides but its fiddily as you have to zoom right in and work it out. I know in photoshop there is a ruler but is there any other way in Elements?

HT204003 how can i print a boarding pass image file from passbook?

how can i print a boarding pass image file from passbook?

I do not believe that Passbook supports printing. You can email, but not print. Then again I'm not sure what it actually emails, if that is a graphic of the card or what. I'm going to try it with my Starbuck's card, but there is no setting for printing within Passbook.
EDIT: Actually it sends the email as an attachment for a Passbook card file, that cannot be handled by my computer. Hope that answers your question.
Message was edited by: ChrisJ4203

How can I batch process files to change name and extention in the latest photoshop cc ?

Hi,
The batch process function has changed design recently and I cannot get it to change file names in photoshop cc 2014.
I keep getting new layers in the first file to open instead of a renamed batch.
I would also like to convert files to jpeg and resize ( at the same time ? )
thank you for help in advance,
christos

Can't help you with CC, but you cannot change files types by merely changing the extension, regardless of program or version.

How can I use the custom new image size presets also when I resize an image

Hi there,
I have created some new image presets at various sizes, and I have saved these presets.
They appear when I create a new image.
How can I get these preset sizes to also appear when I re-size an image ?
The presets for new images seems to be stored in a different way to the re-size image presets, as the re-size image presets are empty.
Many thanks
Mark
Photoshop CS6

Here is what I tried to do, I used a AutoBthreshold2 and I didn't set a value to it. The image is attached below and the template. Thank you.
Here is the error.
Attachments:
pattern.vi ‏51 KB
template.jpg ‏1 KB
bb.jpg ‏350 KB

How can I batch process CR2 raw files to tif's without losing color adjustments?

Working in BRidge and Photoshop CS6:
I have 160 color adjusted hi-res CR2 RAW files from my photographer, thought I was getting tifs. I need tifs for my INdesign file. I tried using the photoshop image proecessor through brige by selecting all my images and then saving as TIFFs but I am losing all my color correcting? Is there a way to save these out as tiffs as a group and not one at a time? I also might have lost my color correcting when I copies them all to one folder as well...not sure what is happening except now my great product shots look like crap. Please help.

Simply drag the entire folder through Bridge—or even individual files—the invisible xmp files containing your adjustments will automatically and invisibly travel along with the image files, as long as you do it within Bridge, not through the OS.
Otherwise, you would need to set your Mac OS to always make invisible files visible, and you don't want that hassle.
Just use Bridge to move files around or to copy them to a new folder.
Incidentally, there's a dedicated Adobe Bridge forum:
http://forums.adobe.com/community/bridge?view=discussions

How can i batch resize a pdf than save from one folder to a bmp in another folder?

At the moment I can get it to work but it is just using one document name and not the individual file names?

Not absolutely sure but I think Actions would struggle with this because the files can not be opened but has to be converted.
Image Processor does not offer bmp, maybe you should check out Image Processor Pro.
http://www.russellbrown.com/scripts.html
Or use the regular Image Processor to create tif or psd and then open and save those as bmp …
Why bmp anyway?

How can i change my Browser background image size in Iweb???

Hello,
I am trying to upload a picture to use in iweb as browser background which will be fixed.
The problem is that when i upload the image it doesn’t appear in full. It zooms in a portion of the image.
This is really annoying and have been trying to change it for days.
Have a look and it might give you a better idea http://www.inthepocketdrumstudio.com
Can anyone help please?
Thank you. A

I really do not know what resizing the browser windows means.
Perhaps I must go back to school again.
Ah, I remember. Drag the bottom right-hand corner of the browser window to resize it.
Anyway, here's the widget page :
http://www.inthepocketdrumstudio.com/InThePocketDrumStudio_files/widget0_markup. html
You should move the image out of the InThePocketDrumStudio_files folder.
With the code i provided the image will display in the webpage.
Also remove the image as background in iWeb.

How can I batch import images 1 per page?

I need to import images into the same Fireworks file, 1 per page. I have about 60 to do, and I'm hoping there's a better way then just adding them one by one. How can I batch import so that a page is created for each image?

You can use the Import Files into Pages command in this extension: http://johndunning.com/fireworks/about/PageCommands
Just select all the files in the file selection dialog. They'll be imported one to a page, sorted by their filename.

How can I batch compress images on import

Hi All,
This might not be the right place for this question; if so, apologies in advance.
Since moving 100% to mac, I've been experiencing a workflow problem, and I can't seem to find anything in iPhoto or Automator to help me out.
My camera takes JPG photos with a fixed file size. That is, all of the images are exactly the same file size, no matter what the image is of. It turns out that this is a huge waste of disk space. To get around this on my windows machine, I used to do the following:
1. Import images to temp folder on my computer.
2. Use irfanview to batch save all of the images to a different folder, with 90% jpg compression.
3. Import the resulting files into Picassa.
Doing this would sometimes reduce an image size from the default 4mb to as small as 300kb (average about 800-1200 kb), and made a really big difference to my disk space.
I would like to find something similar on my Mac, but I've been unable to.
All I want to do is to open each image and save it with a predetermined level of compression. And, I'd like to do this either to the photos that are already imported into iPhoto, or to photos before they are imported.
I thought that automator might be able to help, but I cannot find a simple 'save with XX compression' command anywhere (although I can find tasks to import photos to the computer, and then to iPhoto, so it's mostly there).
I can't find any functionality within iPhoto itself to handle this problem.
Does anyone have any suggestions?

Welcome to the Apple Discussions. You do know that when you compress the jpgs to the 90% level you're reducing the image quality of the file considerably, right? That being said, the only way to do what you want is what you did on the darkside, compress before importing into iPhoto.
There are some resizing apps than you can set to just compress the quality level and leave the pixel dimension alone. Renamer4Mac is one. You can find more by searching at VersionTracker.com for "resize".
What with the large HDs that come in the Macs and the availability of large, inexpensive external HDs, resizing before importing into iPhoto is considered by many to be penny wise but pound foolish.

Batch processing with an image overlay

Is it possible to do batch processing with an image overlay in FW CS4?
I'm trying to resize several hundred images and place rounded corners on them.
If this cannot be done in FW, does anyone know of another program that could accomplish this?

Hi Marje,
It's possible to include both resizing and image overlay in a custom Fireworks command that can be used in batch processing. To get started, you could check out this tutorial that deals with the first step.
That article describes how to perform image resize and overlay (in that case, a watermark), and then how to record the steps and turn them into a custom command that can be later used in batch processing.
Once you saved the custom command, click File >> Batch Process, and follow the steps below:
In the first window, select the images you want to process.
On the next screen, open the Commands dropdown menu and select the custom command you created (it'll probably be on the bottom of the list), and click the Add button to include it in the batch process list.
Finally, on the next screen select the location of the processed files, and optionally save the batch script for later use.
Good luck!

Can't batch process metadata since updating to 3.5

I used to be able to highlight several images in the Library Grid mode, type in a Metadata Label, and that label would be applied to all of the images. Doesn't work any longer. What am I missing? Doesn't work for Keywords either.

Okay, that worked. Now, I have never seen nor used that "Show Metadata
for Target Photo Only" option. How in the world did it get checked?
Cheetah3
Quoting marcb_ <[email protected]>:
marcb_ http://forums.adobe.com/people/_marc_b_ created the discussion
"Re: Can't batch process metadata since updating to 3.5"
To view the discussion, visit:
http://forums.adobe.com/message/4061659#4061659

Aperture: How can I batch change one part of a file name

I have a file name format for my motor sport pictures
EventNameYear_CarNumber_ImageNumber
I have just named 600+ images but after publishing the images, I spotted I put the event year as 2014 instead of 2015.
How can I batch change the year but leave everything else the same? I've been through the batch change options but cannot work it out
I am on Aperture 3.6, MacBook Pro on Yosemite 10.10.2
Thanks

So you renamed the versions in Aperture, the rename was not just done on the export?
The names could be changed either in Aperture or on the exported files but as was noted it would require a script to do it. Doing the rename on the exported files would be the easiest, Applescript or possibly even Automator or any number of 3rd party apps could handle this rather easily. Name Mangler comes to mind as possibly being able to handle this.

How can I batch inventory control via attributes?

How can I batch enable the "keep stock" feature for attributes? How can batch set inventory levels based on inventory after I have enabled "keep stock"?

You will likely get better program help in a program forum
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

How can I make a server differ between two or more clients?

How can I make a server differ between two or more clients?
The clients can connect and talk to the server fine, but how can I make the server talk to one, two or all clients? i.e. what would be a good way to implement this?
Currently, the server listens for connections like this:
while (listening) {
try {
new ServerThread(this, serverSocket.accept()).start();
I guess one way would be to add the ServerThreads to a Hashtable with the client ID as key, and then get the ServerThread with the proper client ID, but this seems unnecessary complicated. Any ideas?

Complicated was perhaps the wrong word, I should have
written something like it doesn't "feel" right. Or is
this a common and good way to solve communication
between a server and multiple clients?Thats pretty much how I do it. I normally use an array or ArrayList of Sockets instead of HashTable, with [0] being the first player etc.... Then you can communicate with exactly who you want. If you want to send bytes to all of them, just send the same thing to each socket individually (or is there a better way to do this?).

How can I batch process 4 diff image sizes from 1 master?

Similar Messages

Maybe you are looking for