How can I best monitor and/or control Temp & Fans

I want to be able to monitor all temperature sensors (an application which tells me when things are too hot, not just gives me teperature numbers).
I want to be able to monitor and tweek the fans.
Actually software that monitors all the sensors would be perfect.
I don't mind if there needs to be several seperate applications or one that does many things.

No, you really don't want to do that. Monitoring temperatures is fine, and you can do that with one of the tools mentioned here:
http://osxdaily.com/2011/07/11/display-cpu-temperature-in-the-mac-os-x-menu-bar/
However, you should never tweak the fans to try to control temperatures! You do not know the hardware better than Apple's engineers, and they've designed the fans to work the way they do for a reason. If your computer overheats, there is a hardware problem somewhere, and rather than cover it up by messing with the fans (and possibly doing further damage by allowing the problem to persist), you should get it fixed.

Similar Messages

How can I best make use of all my devices ? Mac mini, Apple TV, AirPort Extreme, airport express, ipad 2 (all purchased in 2011) and an old imac with OS X. I use my iPhones personal hotspot for all Internet.

How can I best make use of all my devices ? Mac mini, Apple TV, AirPort Extreme, airport express, ipad 2 (all purchased in 2011) and an old imac with OS X. I use my iPhones personal hotspot for all Internet.

Maybe you are looking to re-purpose this equipment versus getting rid of it if so, the best thing to do is search the internet for tutorials. And I say this because it's what I would do, there are a lot of tutorials online. Hope you can find good use for them. Worse case scenario if you can't find something right now, package them very nicely and when you come across something unbox and enjoy. I've re-purposed a mac color classic and LOVE IT!!

How can I insert, modify and delete entries on my table control?

Hi,
I already have build a table control. Now I want to make manipulations on it. Therefore I have created 3 buttons, insert, modify and delete. But how can I get actions on table control.
This is my code for the internal table:
BEGIN OF its OCCURS 0,
mark TYPE C VALUE ' ',
artikel_nr TYPE ZARTIKEL-ARTIKEL_NR,
artikel_typ TYPE ZARTIKEL-TYPE,
bezeichnung TYPE ZARTIKEL-BEZEICHNUNG,
preis TYPE ZARTIKEL-PREIS,
mwst TYPE ZARTIKEL-MWST,
END OF its.
and this is the code which i wanted to delete a row in my table control:
WHEN 'DELETE'.
LOOP AT its WHERE mark EQ 'X'.
DELETE its WHERE mark = 'X'.
MOVE its TO ZARTIKEL.
ENDLOOP.
ENDCASE.
ENDMODULE:
and my PBO and PAI:
PROCESS BEFORE OUTPUT.
LOOP AT its INTO ZARTIKEL WITH CONTROL ARTIKEL.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE EXIT.
LOOP AT its.
MODULE V1.
ENDLOOP.
MODULE user_command_1060.
But if I now open my table control and mark the line that I wanted to delete, nothing happens, not on my internal table and the data even not deleted on my table ZARTIKEL. Have you an idea what I did wrong??

Hi,
In the attributes of table control take the SELCOL as wa_zekpo-flag
And in the internal table and work area add a field as flag(1) TYPE c
Refer:
At screen logic:-
PROCESS BEFORE OUTPUT.
MODULE status_8002.
LOOP WITH CONTROL po_tab.
    MODULE pass_data.
ENDLOOP.
PROCESS AFTER INPUT.
MODULE user_command_8002.
LOOP WITH CONTROL po_tab.
    MODULE modify_data.
ENDLOOP.
MODULE function.
In PBO,
MODULE status_8002 OUTPUT.
SET PF-STATUS 'ZTG_SELTB'.
DATA : line_count TYPE i.
DESCRIBE TABLE it_ekpo
LINES line_count.
po_tab-lines = line_count + 5.
ENDMODULE.                 " STATUS_8002 OUTPUT
*&      Module PASS_DATA OUTPUT
MODULE pass_data OUTPUT.
READ TABLE it_ekpo into wa_ekpo INDEX po_tab-current_line.
ENDMODULE.                 " PASS_DATA OUTPUT
In PAI,
*&      Module USER_COMMAND_8002 INPUT
MODULE USER_COMMAND_8002 INPUT.
OK_CODE = SY-UCOMM.
CASE OK_CODE.
    WHEN 'BACK'.
      LEAVE TO SCREEN 8001.
    WHEN 'EXIT'.
      LEAVE PROGRAM.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_8002 INPUT
*&      Module MODIFY_DATA INPUT
MODULE DISPLAY_DATA INPUT.
MODIFY IT_EKPO INDEX PO_TAB-CURRENT_LINE FROM WA_EKPO.
ENDMODULE.                 " MODIFY_DATA INPUT
*&      Module FUNCTION INPUT
MODULE FUNCTION INPUT.
OK_CODE = SY-UCOMM.
CASE OK_CODE.
    WHEN 'SELECT'. "<--select all records
      LOOP AT IT_EKPO INTO WA_EKPO.
        WA_EKPO-FLAG = 'X'.
        MODIFY IT_EKPO FROM WA_EKPO.
      ENDLOOP.
    WHEN 'DESEL'. "<--deselect all records
      LOOP AT IT_EKPO INTO WA_EKPO.
        WA_EKPO-FLAG = ' '.
        MODIFY IT_EKPO FROM WA_EKPO.
      ENDLOOP.
    WHEN 'DELETE'.
      DELETE FROM it_ekpo WHERE flag = 'X'.
ENDCASE.
ENDMODULE.                 " FUNCTION INPUT
Regards,
Tarun

HOW can I FIX Mavericks and Safari 7.0 to allow Gmail to work? Gmail has been FUBAR'd since downloading Mavericks today. Finally found the brute-force logout site to just getr logged out; can't keep doing that. Other features no longer work, either.

Made big mistake of downloading Mavericks today.
Been struggling with all the FUBARd messes it caused, ALL DAY.
Google basic buttons don't work--can't log out or other basic functions.
Website use is impaired.
It took almost 3 hours to do a basic online order on one of them--at this rate, I'll be out of business soon, and it's seriously impairing Christmas preparations!
Google Voice/Video are screwed up, had to RE-download their voice/video plugin all over again--again.
Voice/video quality is REALLY poor.
Lag times in so many things are bad.
Thought this would download WITH the better writing/bookkeeping programs--NOT!
Mac Maps is piddle compaired with GoogleMaps.
The Email program on the desktop is REALLY hard to use, has few useful functions. It's MAYbe good if one only has ONE email; using it with severeal various email accounts is a serious liability in many ways--like filing, sorting, marking, etc.; no clear way to move email files to an external drive to save, to unload the HD.
HOW can Safari and Mavericks be fixed?
IF not, HOW can I REMOVE Mavericks and get back to Mountain Lion--which was not too great, but certainly more functional than Mavericks!
I NEED my web-based emails to work--NOW...NOT when Mac finally gets around to fixing things sometime later.
I NEED online ordering to work--NOW--not later when Mac finally gets around to fixing things.
PLEASE someone--any help out there? I couldn't even find but a rare hint that Safari 7.0 even exists--much less that anyone admits it's got problems, nor fixes for it.
What to do? Throw the whole unit out? Wipe and reboot? Dumb it back to OS 10? HOW? WHAT?
[freaking out here...]

Zak Adelman, LexSchellings,
It's a shiney new computer. Came loaded with Mountain Lion.
Too busy learning to use the blessed thing, to download anything....except...
The only pluggin that had to be loaded, was Google Voice-Video pluggin, while Lion was still it's OS. [AND been using the Safari that came already in it.]   Had to do that a couple times--nothing new there--that plug-in had to be re-loaded when using a PC, too--THAT happened even before Google slammed everyone into coerced use of it's Google+.
    [I understood from others, that Firefox won't work in Mac units--or I woulda put that in it to see if that solved anything]
This unit seemed a bit sluggish from the git-go, out-of-the-box.
I figured that was probly the local DSL here---rural DSL is...um...our DSL's not something to brag about, but it's the best we can do...
The difference between speed of loading pages, etc. on the new Mac, was --not-- toooo terribly different--though yes, slower on Mac....and chalked it up to my inexperience with Mac.
Been trying to get things up and running for a bit over a month now.
NOT doing very well at it--just barely getting by; rapidly falling behind what needs done [work].
Google worked just --OK-- when OS was Lion, as did the Google voice/video--slower, and voice-video was kinda scratchy or glitchy, but worked enough to --get by--.
Loading Mavericks, ruined that.
VOIP calls via Google talk have bad echio, static, cut-outs; video calling was pixilated or not working; WAS cued to re-load it's Voice-Video plug-in....which seemed to help a bit, though not very well; it only helped the Voice-Video some, not all--figured that was probably Google issues, less than Mac's, since Google has been increasingly dysfunctional as they have twisted it to be a social media-dominant thing.
[[now seeking an email venue that does what Gmail was good at, including the Voice-video calling, that has no intention of turning itself inside out to be "social"]]
Can't sign out of Gmail or Google+, nor use buttons in upper right corner with the drop-down menu.
NO buttons in upper right corner cluster on Gmail work, except the name+ button to toggle over to Google+---which I don't need! [yeah--THAT's a Google problem!]
Can only switch to HTML version by catching that button as the account signs in--if one fails to be fast enough with their fingers, it goes to Google+; can't get to email unless type in mail.google.com.
Managed to catch that button today, and clicked to use HTML "permanently" until these issues get solved.
ALSO:
Have fairly new [about 1 year?] HP bluetooth printer-scanner.
BUT, after Mavericks loaded: it HAS the unit listed, HAS drivers for it, HP unit IS listed as default printer, everything --seems-- "go",
.....except Mac keeps posting it's out of ink, and/or, not hooked up, and/or not turned on--even when it is on.
It's SUPPOSED to be blue-toothing that printer/scanner.
It did it for Lion, before loading Mavericks, even though it was troublesome to get it to work, it at least HAD printed one document when Lion was the OS.
Thank you...Downloaded EtreCheck:
BTW: Trying to copy/paste data from that check list, to this post, was achaic:
had to use Edit, select all, then use edit again to get it pasted--the mouse buttons weren't allowed to copy-paste using right-click functions [is this a relic limited-function "thing" with Mac?, or is it because I wanted to keep using this new wirless, non-Mac mouse?].
Advice?
See below...
Hardware Information:          Mac mini (Late 2012)           Mac mini - model: Macmini6,1
              1 2.5 GHz Intel Core i5 CPU: 2 cores;           8 GB RAM
Additional:
   Monitor used = Visio flat screen. [not Mac]
   Keyboard = Logitech solar wireless [not Mac]
   Mouse = Logitech wireless
Video Information:           Intel HD Graphics 4000 - VRAM: 1024 MB
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
          AirPlay: Version: 1.9 - SDK 10.9
          AppleAVBAudio: Version: 2.0.0 - SDK 10.9
          iSightAudio: Version: 7.7.3 - SDK 10.9
System Software:
          OS X 10.9 (13A603) - Uptime: 2 days 19:33:25
Disk Information:
          APPLE HDD ST500LM012 disk0 : (500.11 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 499.25 GB (456.94 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
USB Information:
          MediaTek Inc MT1806
          Logitech Logitech USB Headset
          Logitech USB Receiver
          Apple Inc. BRCM20702 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
          Apple Inc. thunderbolt_bus
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist
          [loaded] com.google.keystone.daemon.plist
Launch Agents:
          [loaded] com.google.keystone.agent.plist
          [loaded] com.hp.devicemonitor.plist
          [loaded] com.hp.messagecenter.launcher.plist
User Launch Agents:
User Login Items:
          iTunesHelper
          SpeechSynthesisServer
3rd Party Preference Panes:
          Flash Player
Internet Plug-ins::
          FlashPlayer-10.6: Version: 11.9.900.170 - SDK 10.6
          QuickTime Plugin: Version: 7.7.3
          Flash Player: Version: 11.9.900.170 - SDK 10.6
          Default Browser: Version: 537 - SDK 10.9
          o1dbrowserplugin: Version: 4.9.1.16010
      ====== npgtpo3dautoplugin: Version: 0.1.44.29 - SDK 10.5 ===[this was in red]=====
          googletalkbrowserplugin: Version: 4.9.1.16010
Bad Fonts:
          None
Old applications:
          HP Device Monitor:          Version: 2.7.0 - SDK 10.5
                    /Library/Printers/hp/hpio/HP Device Monitor.app
Time Machine:
===      Time Machine not configured! ===[this was in red]===
Top Processes by CPU:
               6%          WindowServer
               4%          Safari
               4%          SafariDAVClient
               2%          EtreCheck
               0%          com.apple.iCloudHelper
Top Processes by Memory:
          303 MB          Mail
          270 MB          Safari    ======[this is version 7.0 ]======
          262 MB          mds_stores
          147 MB          softwareupdated
          147 MB          com.apple.IconServicesAgent
Virtual Memory Statistics:
          1.77 GB          Free RAM
          2.85 GB          Active RAM
          2.36 GB          Inactive RAM
          1017 MB          Wired RAM
          4.64 GB          Page-ins
          111 MB          Page-outs

Upon syncing my iPhone and mac all of my ical and iPhone calendar events have duplicated. how can i fix this and avoid it in the future?

upon syncing my iPhone and mac all of my ical and iPhone calendar events have duplicated. how can i fix this and avoid it in the future?

Greetings,
Questions:
1. What version of the Mac OS are you running (Apple > About this Mac)?
2. What version of the iOS are you running (Settings > About)?
3. Do you backup your computer (http://support.apple.com/kb/HT1427)?
--- If you don't regularly backup your computer, now is the time to start.
4. Do you backup your iPhone (http://support.apple.com/kb/ht1766)?
Check the calendar list on the left hand side of iCal. Is it that the individual events are duplicated or is it just that you have the same calendar listed more than once? If its that you have more than 1 copy of each calendar, you can delete one of the duplicate calendars to eliminate the duplicates.
If you find that it is the individual events that are duplicated then there are 2 options:
1. Restore your computer iCal database or iPhone from a backup made before the duplication occurred.
2. Use a duplication removal program (or do it by hand) to remove the duplicates: http://www.nhoj.co.uk/icaldupedeleter/
If you have a backup made before the duplication occurred, reply back with what kind of backup you have and I'll suggest how to recover the calendars.
To avoid this issue in the future:
Keep regular backups. They are your best defense against data anomalies which are a fact of life in computers (although hopefully rare).
Keep your computer and iPhone software fully up to date (Apple > Software Update / Settings > General > Software Update).
Make sure the date and time on your computer and iPhone are correct before you sync the two devices.
Make sure the cable connections between the two is solid and that the cable shows no signs of physical damage.
Hope that information helps.

How can I use undo and redo with run time menu?

Hi..I try to built my own menu for graphic programming. How can I use undo and redo in labview with run time menu?

filozof-
During runtime, by default, LabVIEW has undo/redo data changes under the edit menu. This will undo/redo changes made to controls during runtime. If you want a more extensive undo/redo (custom for your application), you are going to have to do quite a few things
1) Create a custom runtime menu (Edit>>RunTime Menu) and place your own undo/redo controls on it
2) Keep an action history in your program
3) Catch the Shortcut menu event for your custom undo/redo controls
4) Reverse the last action in your histroy when you catch the event
This method would allow you undo entire operations (like resize, move, or whatever kind of functionality you are building into your application) unstead of just undoing data changes.
Xaq

Iphone has been in recovery mode for 4 hours and hasn't come back to the home screen and how can i fix this and get it back to working order?

iphone has been in recovery mode for 4 hours and hasn't come back to the home screen and how can i fix this and get it back to working order?
the iphone 4S has been in recovery mode for a long time and i have tried to press and hold the power and home buttons until the apple symbols comes on the screen again but it stay on the screen until the screen turns off and doesn't come back on to the home screen and have tried to sync with mac and doesn't do anything it does display the itunes and cable icons for a while but then goes back to the apple symbol and doers nothing what can I do to fix this and not loose what is on the phone at all?

Hi, simonRM.
Thank you for visiting Apple Support Communities.
I understand that you are unable to restore your iPhone. Here are the best troubleshooting resources to start with when not being able to update or restore your iPhone.
If you can't update or restore your iPhone, iPad, or iPod touch
Resolve iOS update and restore errors in iTunes
-Jason H.

HT5439 i can't access my university anyway, how can i add username and password?

i try to use this solution to apply my university proxy, but it dodn't work. Can u suggest me more about how can i add username and password?

You should be able to use the OpenVPN Connect app running on your iPad to connect your iPad to the VPN directly. It is an official OpenVPN client for iOS devices.
In what way is it "not compatible"? Have you tried it? Tunnelblick is an OpenVPN client, so your school's VPN is using the OpenVPN protocol. That means any OpenVPN client should be able to access it. (It is possible, but unlikely, that your school uses encryption that is not available on the iPad, but that would be very unusual.)
Otherwise, a remote control app on your iPad would let you control your Mac at home. "Back to My Mac", for example, would allow you to control your Mac remotely. The tricky part of this is that usually a VPN is set up to send all Internet traffic via the VPN server, and I'm not sure how that would work with "Back to My Mac".

How can I pass username and password in a client bean to call a webservice?

Hi,
I have created a Client Java Bean for a web service (an automatically created Service from a Bapi) that requires username and password. How can I pass username and password in the code?
Thank you!
Julia
This is my code:
public Z_FlightGetlist port;
Business Method.
public String test1234() {
try{
BAPI_FLIGHT_GETLIST list = new BAPI_FLIGHT_GETLIST();
list.setAIRLINE("KLM");
port.BAPI_FLIGHT_GETLIST(list);
return "ok";
catch(Throwable e){
return "error"+e;
public void ejbCreate() throws CreateException {
try{
InitialContext ic = new InitialContext();
Z_FlightGetlistService s = (Z_FlightGetlistService)ic.lookup ("java:comp/env/FlightProxy");
Z_FlightGetlist vi = (Z_FlightGetlist)s.getLogicalPort(Z_FlightGetlist.class);
this.port = vi;
catch(Throwable e)

Hello Julia,
Check this document
http://help.sap.com/saphelp_nw04/helpdata/en/50/a5d13f83a14d21e10000000a1550b0/frameset.htm
Best regards, Maksim Rashchynski.

How can we make a field confirm control compulsory field

how can we make a field 'confirm control' compulsory field while creating a vendor code
this field is under tab default data material tab while creating vendor code in purchasing org .part of vendor

Hello,
This can be done using the configuration..
Go to Logistics - General >Business Partner>Vendors>Control>Define Account Groups and Field Selection (Vendor)--> and select the vendor group for which you want this field to be mandatory.
Press details --> in the block "field status", double click Purchasing Plant and again double click Plant level purchasing data, in the second page (down), you can see the confirmation control key, that you have to make as req entry.
If you want the conf control key to be mandatory for all the vendors groups, then you can do this by purchasing organisation level..that config node is just below this settings.
Regards,
Sakthi

How can I keep music and audio books organized on external drive

how can I keep music and audio books organized on external drive

Hi RUEDIFISH,
Thanks for visiting Apple Support Communities.
You may find these articles helpful with moving your iTunes library to an external drive:
iTunes for Mac: Moving your iTunes Media folder
http://support.apple.com/kb/ht1449
iTunes: Back up your iTunes library by copying to an external hard drive
http://support.apple.com/kb/HT1751
Best,
Jeremy

How can I separate Left and right audio channels in labview 8.5 tia sal22

How can I separate Left and right audio channels in labview
8.5 tia sal22
Greetings All
I have a working Labview vi that converts a math formula to an
audio signal. I would like to have the
right and left audio channels playing different math audio signals is this
possible?
Example
Right channel -> plays the audio signal created by a math
formula
Left channel -> plays the audio signal created by another
math formula with adjustable phase control
I’ve included a VI with a working audio and math formula but
I’m not sure how to separate the left and right channels.
I’m using labview 8.5
I looked up a similar question on the
support board and it said” use an instance of the the Sound Output Write that
has a 1D waveform data type input (i.e. Sound Output Write (DBL)). Each
element in the array would correspond to a channel.”
But I’m not exactly sure what he meant. I’m using a formula to generate the wave file
Tia sal22
Attachments:
fixed mathscript formula to sound test.vi ‏680 KB

Sorry it took so long to get back. Here's the new VI with it splitting out the left and right channels.
I'm using a Gigaport HD 8 output usb audio device but I'm experience clicks and pops. I increase the buffers
but I still get the clicks and pops. I know gigaport HD can use ASIO drivers which most likely would solve the problem but one needs to code in C for this which I'm not proficient in. Can someone recommend a work around to prevent this clicks and pops, can I somehow change my VI to fix this? Does anyone have a VI that will allow access to the ASIO latency properties?
I'm using labview 8.5
And a gigaport HD which is a USB audio device which outputs 8 analog signals (it is ASIO compatible)
tia sal22
Attachments:
lvt_audio_realtime-out left right device ID test.vi ‏68 KB

How can I remove asm and ocr installation in AIX?

Hi,
I try to install single instance with using ASM in AIX.
But I did not make successfully.
Now I want to remove ASM and OCR installation then
I will plan to make new clear installation.
How can I remove asm and ocr ??
Or How can I control my removing is fully correct ?

1) ASM Instance Clean-Up Procedures
Stop all of the databases that use the ASM instance that is running from the Oracle home that is on the node that you are deleting.
On the node that you are deleting, if this is the Oracle home which from which the ASM instance runs, then remove the ASM configuration by completing the following steps. Run the command srvctl stop asm -n node_name for all of the nodes on which this Oracle home exists. Run the command srvctl remove asm -n node for all nodes on which this Oracle home exists. If there are databases on this node that use ASM, then use DBCA Disk Group Management to create an ASM instance on one of the existing Oracle homes on the node, restart the databases if you stopped them.
If you are using a cluster file system for your ASM Oracle home, then ensure that your local node has the $ORACLE_BASE and $ORACLE_HOME environment variables set correctly. Run the following commands from a node other than the node that you are deleting, where node_number is the node number of the node that you are deleting:
rm -r $ORACLE_BASE/admin/+ASMnode_number
rm -f $ORACLE_HOME/dbs/*ASMnode_number
If you are not using a cluster file system for your ASM Oracle home, then run the rm or delete commands mentioned in the previous step on each node on which the Oracle home exists.
2) Deleting an Oracle Clusterware Home Using OUI in Silent Mode
!!! Oracle recommends that you back up your voting disk and OCR files after you complete the node deletion process.
If you ran the Oracle Interface Configuration Tool (OIFCFG) with the -global flag during the installation, then skip this step. Otherwise, from a node that is going to remain in your cluster, from the CRS_home/bin directory, run the following command where node2 is the name of the node that you are deleting:
./oifcfg delif –node node2
Obtain the remote port number, which you will use in the next step, using the following command from the CRS_home/opmn/conf directory:
cat ons.config
From CRS_home/bin on a node that is going to remain in the cluster, run the Oracle Notification Service Utility (RACGONS) as in the following example where remote_port is the ONS remote port number that you obtained in the previous step and node2 is the name of the node that you are deleting:
./racgons remove_config node2:remote_port
On the node to be deleted, run rootdelete.sh as the root user from the CRS_home/install directory. If you are deleting more than one node, then perform this step on all of the other nodes that you are deleting.
From any node that you are not deleting, run the following command from the CRS_home/install directory as the root user where node2,node2-number represents the node and the node number that you want to delete:
./rootdeletenode.sh node2,node2-number
If necessary, identify the node number using the following command on the node that you are deleting:
CRS_home/bin/olsnodes -n
Perform this step only if your are using a non-shared Oracle home. On the node or nodes to be deleted, run the following command from the CRS_home/oui/bin directory where node_to_be_deleted is the name of the node that you are deleting:
./runInstaller -updateNodeList ORACLE_HOME=CRS_home
"CLUSTER_NODES={node_to_be_deleted}"
CRS=TRUE -local
Deinstall the Oracle Clusterware home from the node that you are deleting using OUI as follows by running the following command from the Oracle_home/oui/bin directory, where CRS_home is the name defined for the Oracle Clusterware home:
./runInstaller -deinstall –silent "REMOVE_HOMES={CRS_home}"
Perform step 9 from the previous section about using OUI interactively under the heading "Deleting an Oracle Clusterware Home Using OUI in Interactive Mode".

How can I best use my iPhone 3Gs in New Zealand?

How can I best use an iPhone while in New Zealand?

So - what I meant was... I am in the US and traveling to New Zealand and wondering if I can use my iPhone 3Gs without spending lots of money with AT&T? What experiences have others had?

How can i config WLS7 and iPlanet LDAP

How can i config WLS7 and iPlanet LDAP?
failed during initialization. Exception:java.lang.SecurityException: Authenticat
ion for user weblogic denied
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:978)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1116)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)
>

Yos:
Series of steps to get WLS working with some external LDAP server follows:
I. create a new domain /mydomain
II. start server
III. open WebLogic console in a browser
IV. in left frame, go to
security->realms->myrealm->providers->AuthenticationProviders and click
V. in right frame, click on “Configure a new iPlanet Authenticator”
VI. In the new screen, under General, make sure the Control Flag is set to Required,
select a name for this authenticator, and click Create.
VII. Select iPlanet LDAP tab and fill in values for Host, Port, Principal where
these values reflect the settings for your LDAP server. (Note: the default
principal for an iPlanet LDAP server is uid=admin, ou=Administrators,
ou=TopologyManagement, o=NetscapeRoot). Click Apply.
VIII. Click on Credential: Change. At the new screen, enter the credential
associated with the Principal that you entered in step VII in both boxes. This will
be the password that is used to do a bind to your LDAP server with the principal.
Click Apply.
IX. Select Users tab and make sure these properties accurately reflect the structure
of your LDAP server. Most of the time the only property that needs to be changed is
the User Base DN property, from ou=people,o=example.com to
ou=people,o=myCompany.com. Click Apply.
X. Select Groups tab and make sure these properties accurately reflect the structure
of your LDAP server. Most of the time the only property that needs to be changed is
the Groups Base DN property, from ou=people,o=example.com to
ou=groups,o=myCompany.com. Click Apply.
XI. Now, the boot identity of your server absolutely must be a user that exists on
your LDAP server. You must also have an “Administrators” group on your LDAP server,
and the boot identity must be a user that exists in this “Administrators” group, or
the server will not start. So open your LDAP console (this will be a console that
is specific to the LDAP server you are using) and use the management tools to create
the “Administrators” group and a user that you place in the “Administrators” group
that is the boot identity that you use to start WebLogic.
XII. Make these changes and restart the server.
XIII. You can verify that the LDAP setup is correct by doing a thread dump. You
should see a thread like:
“LDAPConnThread localhost:389" daemon prio=5 tid=0x8d9b308 nid=0x8f8 runnable
[0x9e2f000..0x9e2fdbc]
at java.net.SocketInputStream.socketRead(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java:86)
at java.io.BufferedInputStream.fill(BufferedInputStream.java:186)
at java.io.BufferedInputStream.read(BufferedInputStream.java:204)
- locked <3281d98> (a java.io.BufferedInputStream)
at netscape.ldap.ber.stream.BERElement.getElement(BERElement.java:101)
at netscape.ldap.LDAPConnThread.run(LDAPConnThread.java:420)
where “localhost:389” is the server name and port of your LDAP
server. This means that your Authenticator has been set up correctly.
XIV. Now you can delete your default authenticator. Open the WebLogic console and
go to security->realms->myrealm->providers->AuthenticationProviders in the left
frame, and click
XV. In the right frame, look for DefaultAuthenticator and click on the trash can to
the far right. Say “Yes” when it asks if you are sure, then click Continue.
XVI. Restart the WebLogic server. If the server boots correctly, you’re done.
Everything is working correctly.
Please note that the "default authenticator" refers to the embedded LDAP server that
ships with WebLogic.
Hope this helps.
Joe Jerry
Yos wrote:
How can i config WLS7 and iPlanet LDAP?
failed during initialization. Exception:java.lang.SecurityException: Authenticat
ion for user weblogic denied
java.lang.SecurityException: Authentication for user weblogic denied
at weblogic.security.service.SecurityServiceManager.doBootAuthorization(
SecurityServiceManager.java:978)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:1116)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)
>

How can I best monitor and/or control Temp & Fans

Similar Messages

Maybe you are looking for