How can I book overhear in production order in term of rupees of percentage.

Dear Sir,
We are going to implementing new product in SAP, But The probleme was , We can not define hourly rate for labour or machine. We want to book such cost directly in terms of ruppes or percentage of total values of finish product which is already define by management.
So how & at where We can charge such overhead.?
Thanks & Regards,
Ashit

I will recommend you to find the workflow instance from SWWWIHEAD table and use function module found by F4 ing
SWWCANCEL
PLEASE DO NOT USE TCODE SWWL.
Thanks
Arghafdip

Similar Messages

How Can I Book cost of damaged Part in Order??

Dear Sir,
Need Your Suggestion regarding settlement of cost for the damaged parts.
We had supplied One assembly to Client with single invoice. During transportation One of the part of that assembly get damaged. Client has sent back only that part back for the repairing and accept rest of the materials.
Which procedure should i follow for the rectification of that damaged parts in SAP and How can i book the cost of the required materials and labour??
Thanks,
Rajnil K Kalola

Hi Rajani
This part returned treated as non valuated stock, as you can't value it as this part of full machine? is it right? or can you identify the Product cost? then value based on it or bought out product then take back with same price as return from Customer? .the addtional rectification/repair cost may treat over head or add to the cost of the part, in case you can sell at higher price.Discuss with MM/PP team and proceed .
Tx
maalik

How Can i Book cost for the rectification of damaged materials??

Dear Sir,
Need Your Suggestion regarding settlement of cost for the damaged parts.
We had supplied One assembly to Client with single invoice. During transportation One of the part of that assembly get damaged. Client has sent back only that part back for the repairing and accept rest of the materials.
Which procedure should i follow for the rectification of that damaged parts in SAP and How can i book the cost of the required materials and labour??
Thanks,
Rajnil K Kalola

Hi Rajnil,
You need to do CO11N confirmation of rework order. Since settlement profile is entered as orginal production order all the cost incurred on rework order will get settled to the orginal order. Even if orginal production order is TECO Technically completed you can post cost. Once order is CLSD Closed you cannot post any cost.
Refer the below Help for more details on Returns.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/a5/63360a43a211d189410000e829fbbd/content.htm
Thanks & Regards,
Ramagiri

How to restrict the GR for Production Order when Goods Issue is not done

Hi Gurus
How to restrict the GR for Production Order when all the required components for production order are not issued with all required quantity. Even for partial issue system should not allow GR with 101. The user status with RMWA, RMWF & CGFB is not working.
Pls suggest best solution.
Abhijit.

Hi,
You can club together the GI nad GR at the time of confirmation..
I.e Backflush for the components and auto GR for the Product.
So that you can stream line the Process.
The best Option would be to use the User Exit:
Enhancement - MBCF0002
Functional Module - EXIT_SAPMM07M_001
Include - ZXMBCU02
Refer below link for further details..
How to stop the goods receipt before issueing the goods for production orde
Regards,
Siva

How to find system status for production orders?

How to find system status for production orders?
looked into table AUFK, AFKO and AFVC but none of these tables, carry
system status as part of the fields(STTXT)
I tried to filter in COOIS, but not much help
Able to find system status information in COHV,Is there any other way where
I can find system status information for production orders
Kindly guide

Hi,
Look into table, JEST, JSTO, AFPO & AFKO. CAUFV filed OBJNR, TJ02T filed ISTAT.
But, it is very difficult to combine the details like Order and System status.
Take the help of your ABAPer to generate Report for you.
Regards,
Siva

How can I customize the EmailText, in order to print the eROOMName

Dear
In a eRoom, I created subscitpion for documents changes
How can I customize the EmailText, in order to print the eROOMName?
Which 'param name' is the eROOMName?
Which file I have to change SUBSCRIPTION_en.xml or SUBSCRIPTION_EMAIL.xsl?
Thanks a lot in advance

Go to: expresslane.apple.com
Under product categories choose iTunes
Then iTunes store
Then account management
Press continue.
Now choose iTunes store security and answer the bullet questions and click continue.
Sign in with your appleid and press continue
Under contact options fill out the information and advise iTunes that you would like your security/challenge questions reset. Click send.
iTunes will respond to you within 24 hours by email.

HT1491 I can't remember my security questions. How can I find the answers in order to purchase my first app?

I can't remember my security questions. How can I find the answers in order to purchase my first app?

Go to: expresslane.apple.com
Under product categories choose iTunes
Then iTunes store
Then account management
Press continue.
Now choose iTunes store security and answer the bullet questions and click continue.
Sign in with your appleid and press continue
Under contact options fill out the information and advise iTunes that you would like your security/challenge questions reset. Click send.
iTunes will respond to you within 24 hours by email.

How to use smart form for production orders

Hello Experts,
I have a couple of questions about printing out production orders from SAP, from OPK8.
My ABAPer has developed a smart form and I am trying to use the same for the list LG01, i.e. the object list.
Since, there was no place to assign a smart form directly, so the ABAPer has copied the existing print program , defined for my ref. order type and LG01 and assigned the new smart form inside the program. This new program has now been assigned against my ref. ord type, LG01 and all the plants, as seen in screenshot below.
Now, what is happening is that when I give print for my order, a pop-up screen asks for the printer. I give LOCL , check 'print now' and then click on the print preview.
I can see the new form that has been developed and it is alright.
Then, when I click on the back arrow, once again the print pop-up screen appears. Now, when I enter LOCL, print now and click the print preview, then I see another form open up before me. I am assuming that this is some form which was pre-configured in the system, under the section 'Forms', for the same object list LG01.
Do I have to assign the new smart form under the section "Forms' also, for the ref order type and LG01? or the change in the section 'print programs' is enough for the new form to kick in? Please guide me. I tried to but it gave the error that the form is not created in English. Also , my form is a smart form, not a SAPScript or PDF form, so I wonder if that will help at all.
Requirement :- I need to suppress this second form somehow but do not know how to do it. I want that only one form, i.e. my smart form should be printed out when someone gives print from the order.
Let me know if something is not clear.
Regards
P.R

Hi P,
Go a few steps down and remove flags on the documents you don't want to print:
this are just suggestions, they can be changed in your production order, in CO02, menu Order->Settings->List Control.
regards,
Edgar

How can I change my Creative Cloud order to new, cheaper offer?

I just bought a Creative Cloud membership two months ago, and now suddenly I could get it almost half prise. It's awfully bad to pay almost 300€ just because I was a early bird, and still suffering the same hick-ups as the new members.
I have pretty new Production Premium CS5 paggage, and I could have lived with it, unless my new way of working different offices during the week.
How can I change my Creative Coud order to new, cheaper one (36,89€/m) without penalty of the rest of the year?

Hi katrikuu
I noticed you had an educational version of Production Premium CS5 registered. Unfortunately, the offer pricing is not available to Education, OEM or volume licensing customers as per the terms of the offer: https://creative.adobe.com/plans
If you have other Creative Suite software that may qualify, please let me know.
Kind regards
Bev

How can I put APPS in Alphabetical order

How can I put APPS in Alphabetical order

I can copy and paste too.
Submissions
Stay on topic. Apple Support Communities is here to help people use Apple products and technologies more effectively. Unless otherwise noted, do not add Submissions about nontechnical topics, including:
Speculations or rumors about unannounced products.
Discussions of Apple policies or procedures or speculation on Apple decisions.
Be polite. Everyone should feel comfortable reading Submissions and participating in discussions. Apple will not tolerate flames or other inappropriate statements, material, or links. Most often, a "flame" is simply a statement that is taunting and thus arbitrarily inflammatory. However, this also includes those which are libelous, defamatory, indecent, harmful, harassing, intimidating, threatening, hateful, objectionable, discriminatory, abusive, vulgar, obscene, pornographic, sexually explicit, or offensive in a sexual, racial, cultural, or ethnic context.
Shoutouts to my friends Phil and Meg for their technical help in alphabetizing my apps. Without them none of this would have been possible.

HT4199 My macbook pro and ipad does not recognize my printer on my wireless network, but my pc does. How can I get my apple products to see it on the network so I can print wirelessly? My printer is a Brother MFC-J270W

My macbook pro and ipad does not recognize my printer on my wireless network, but my pc does. How can I get my apple products to see it on the network so I can print wirelessly? My printer is a Brother MFC-J270W

try disabling email scanning for incoming mail.
One of the last things that occurs is the mail server and Thunderbird sign off on "where we are up to" and Thunderbird stores this state information in the popstate.dat file in your profile (there is one in each POP mail account folder). If the anti virus, or you for that matter, end the conversation a few seconds early that hand off does not occur and the popstate is not stored.

Having arranged some scanned pictures in an album in I-Photo how can I keep them in the order I have chosen when I move the album. They all have the scan date and not the taken date and move to new positions if I move them from one album to another.

Having arranged some scanned pictures in an album in I-Photo how can I keep them in the order I have chosen when I move the album. They all have the scan date and not the taken date and move to new positions if I move them from one album to another.
Is there any way to re-number them in the order I have chosen so that they can then be sorted by number? The scans are all from pre-digital images that I wish to move to a photobook and I don't want to have to organise them twice!
Thanks for any suggestions.

I was a bit short, Chris, sorry. It is limited, what can be posted, when typing on an iPad.
Now I am back on my Mac. I meant the following: Batch Change the date for a large range of photos, that should have a date stepped in increments.
Select all Photos at once and use the command "Photos > Batch Change".
Then set the date for the first photo and select an increment, e.g. one minute.
Now all photos will get a new date assigned, incremented by one minute, in the sequence you have selected. So you will be able to sort them by date. This way it will be unnecessary to change the titles or filenames.

I have pictures in a folder, how can I display them in name order?

I have pictures in a folder, how can I display them in name order?

Welcome to the Apple Community.
I don't think you can. You might ensure that their creation dates are in order, but I'm not so such that will help. Ordering seems to be a feature limited to use with iPhoto/Aperture.

How can I create a new sales order template

Hello,
how can I create a new sales order template in SAP CRM 7.0 (Web UI)? I want to use this sales order template in scenario ´'Mass Generation of Sales Orders via Marketing Projects'.
Thanks for your support in advance.
Best regards,
anvan

Hi,
Did you set up this scenario? I want something similar, but I want an ERP order to be created. Do you know if that is possible? Do you have som tips?
regards Camilla

How can I create a new sales order template in SAP CRM 7.0

Hello,
how can I create a new sales order template in SAP CRM 7.0 (Web UI)? I want to use this sales order template in scenario ´'Mass Generation of Sales Orders via Marketing Projects'.
Thanks for your support in advance.
Best regards,
anvan

Hi,
Did you set up this scenario? I want something similar, but I want an ERP order to be created. Do you know if that is possible? Do you have som tips?
regards Camilla

How can I book overhear in production order in term of rupees of percentage.

Similar Messages

Maybe you are looking for