How can I boost ipad3's antenna signal reception?

My Wifi router name don't appear in wifi networks list when I'm in the bedroom, where as all other devises like laptop, Blackberry can see the wifi router signal very well. If I keep my ipad3 very near to the wifi router it works well.
The distance between wifi router and bedroom is not even 10 meters
How can I boost ipad's antenna signal reception to see my wifi router?
I already reset network settings and toggles airplane mode. Upgraded ios to the lastest version.

There's no hardware solution.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Similar Messages

How can i design a smart antenna using labview?? plzz

i have my final year project. I am student of Beng in Telecommunications. How can i design a smart antenna using switched beam algorithm on lab view??

You can hardly use LabVIEW to design antenna, but definitely can use LabVIEW for Characterization, Optimization, and Test your antenna design.
Hope you got the point here.
I am not allergic to Kudos, in fact I love Kudos.
Make your LabVIEW experience more CONVENIENT.

How can I remedy losing my wifi signal a hundred times a day at least?

HOw can I remedy losing my wifi signal a hundred times a day?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

How can i boost my graphics for gaming?

I have a winter 2013 macbook pro with a 2.9GHZ i7, 8GB 1600 MHz DDR3 memory, Intel HD Graphics 4000 512 MB, running OS X 10.8.2 (12c3012) how can i boost this for gaming...is this good for gaming? could i play games like call of duty with this?

goose-hunter wrote:
so do you think runniong black ops 2 would be ok...this is not a gaming PC but i already dropped some coin to have a powerful macbook for work. i figure might as well be able to game a bit on it too..
The 13" is not a gaming computer, despite Apple packaging the 13" along with the other MacBook Pro's.
You'll have to check the specs of the games at the developers sites, however the minmal requirement is 99% of the time unsatisfactory as updates etc come out.
Apple used to have that 13" type of machine as a MacBook, then introduced the iPad and moved the MacBook onto the MacBook Pro's as a 13" model, then removed the 17" MacBook Pro.
So you see the shuffling around going on there as consumers in general are opting for the iPad instead than laptops.
Forget about 3D gaming on Mac's, it's future is very bleak indeed as more people are opting for the 3D less iPads with their "fake 3D" which is 2D images made to look like it's 3D.
3D GPU's generate a lot of heat, thus are unsuitable for iPads, and with the rise of dedicated consoles, makes them a better choice for 3 D gaming for most.
The hardcore 3D PC gamers are on Windows machines for it's longevity between OS cycles, hardware customizing and software tweaking ability.

How can i send more than one signal to DMA FIFO?

Hello,
I'm trying to send more than one signal to DMA FIFO, but i don't know how to do. When i send one signal i don't have problems. I try to use one block DMA FIFO for one signal. For example if i have 3 signal i use · DMA FIFO but whe i want to wath them in a waveform chart the signals have a delay.
How can I do to send more than one signal to DMA FIFO? and if that's no posible, How i can do for syncronizate the 3 signals?
The data type of the signal is FXP <16,10>
Regards.
Pablo
Solved!
Go to Solution.
Attachments:
Block Diagram.jpg ‏81 KB
Block Diagram.jpg ‏81 KB

Not quite. You need to use the Integer To Fixed Point Cast to change from the integers to your FXP numbers. You can then build them into a cluster to write to the Waveform Chart.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Combine and Decode FXP.png ‏14 KB

How can this be...No signal?

Okay I have my iMac with a strong signal from my Airport Express which is located within 5 feet of my computer desk. My Macbook Pro is sitting right here and today I have no WiFi signal coming to it. When I try to go online using the MBP, its saying I am not connected to the internet! I am able to post this question to this forum because I DO have a WiFi signal on my iMac!
How can that be that I have a signal on one and not the other? Yes I get online with the MBP all the time and today its not acting right. I am sure if I reboot my laptop that might solve the issue but in case it doesn't, this is a strange thing to happen!

I would start by simply turning off, and then, turning on the built-in AirPort on your MBP. You can do this from the AirPort icon on the OS X menu bar.

How can I use FREQ_OUT output frequency signal

Now,I use VXI-MIO-64E-1 board and Windows/CVI,I want to know how can I use FREQ_OUT single.
Thanks a lot,
Wang

The Frequency Scalar of the DAQ-STC based devices is essentially a third counter that can be programmed only for continuous pulse train generation. See the knowledgebase link below for more info on this. Since this counter is only four bits, this limits the clock divisors to 2^4 or 1 thru 16. Therefore the only frequencies that can be programmed for output on the FREQ_OUT line are timebase / (integer between 1 and 16).
How do I use the FREQ_OUT pin on my E series board?
According to the NI-DAQ Function Reference Manual, the signal name should be ND_FREQ_OUT. The source can then be ND_NONE, ND_INTERNAL_20_MHZ, or ND_INTERNAL
_100_KHZ. sourcespec would follow respectively as ND_DONT_CARE, 1 through 16, or 1 through 16. Note that selecting ND_NONE will disable output on the FREQ_OUT pin.
Thanks,
Heath

How can I improve quality of sound signal tia sal22

Greetings All
I have a VI that plays an audio signal out of an audio card but the quality isn't that great in real time when I modify it. I can create the audio signal in mathematica 6 and it sounds great but labview has some issues can anyone recommend a way to improve the way the qualtiy of the audio signal sounds...Do I need to increase buffers or memory allocation to labview if so how can I do that.
tia sal22
PS I'm using labview 8.2 does 8.5 fix this problem?
Solved!
Go to Solution.
Attachments:
mathscript formula to sound test test vmr.vi ‏680 KB

I'm creating different audio sounds using equations using mathscript. The generate sound.vi is what I used along with mathscript. Every once in awhile I can here a drop out... (I have good ears :-) I'm just trying to find out a way to increase the buffers or memory to labview to prevent drop outs from occuring from the sound card.
The equation is below
0.61887-0.680232 *cos(6.28319 *t)+2.96293 *cos(12.5664 *t)-0.532024 *cos(18.8496 *t)-0.87105 *cos(25.1327 *t)-0.708467 *cos(31.4159 *t)-0.510603 *cos(37.6991 *t)-0.236222 *cos(43.9823 *t)-0.112403 *cos(50.2655 *t)-0.0682778 *cos(56.5487 *t)-0.0317201 *cos(62.8319 *t)-0.00399665 *cos(69.115 *t)+0.0110171 *cos(75.3982 *t)+0.0150056 *cos(81.6814 *t)+0.0156793 *cos(87.9646 *t)+0.0122262 *cos(94.2478 *t)+0.00657111 *cos(100.531 *t)+0.00432201 *cos(106.814*t)+0.00341808 *cos(113.097 *t)+0.00370543 *cos(119.381 *t)+0.00333083 *cos(125.664 *t)+0.00210063 *cos(131.947 *t)+0.00505182 *cos(138.23 *t)+0.00866377 *cos(144.513 *t)+0.0110508 *cos(150.796 *t)+0.0103873 *cos(157.08*t)+0.00850073 *cos(163.363 *t)+0.00811838 *cos(169.646 *t)+0.00689916 *cos(175.929 *t)+0.0069005 *cos(182.212 *t)+0.00596679 *cos(188.496*t)+0.00358397 *cos(194.779 *t)+2.25013 *sin(6.28319 *t)-4.51511*sin(12.5664 *t)+0.380184 *sin(18.8496 *t)+0.461366 *sin(25.1327*t)+0.0632479 *sin(31.4159 *t)-0.135095 *sin(37.6991 *t)-0.160692*sin(43.9823 *t)-0.131694 *sin(50.2655 *t)-0.118779 *sin(56.5487*t)-0.0966167 *sin(62.8319 *t)-0.0797548 *sin(69.115 *t)-0.0599806*sin(75.3982 *t)-0.0380326 *sin(81.6814 *t)-0.0247422 *sin(87.9646*t)-0.0141664 *sin(94.2478 *t)-0.0078713 *sin(100.531 *t)-0.0060369*sin(106.814 *t)-0.0062354 *sin(113.097 *t)-0.00650479 *sin(119.381*t)-0.00560183 *sin(125.664 *t)-0.00806245 *sin(131.947 *t)-0.00982397*sin(138.23 *t)-0.00853789 *sin(144.513 *t)-0.00582364 *sin(150.796*t)-0.00249366 *sin(157.08 *t)-0.00125506 *sin(163.363 *t)-0.0000310571*sin(169.646 *t)+0.000971067 *sin(175.929 *t)+0.00160663 *sin(182.212*t)+0.00321022 *sin(188.496 *t)+0.00388205 *sin(194.779 *t)
tia sal22

How can i boost my ram

i would like to boost my ram how can a acieve that?

you will have to buy the RAM, but search for the right RAM card for your Mac because not all of them are the same, with the link that Erick Ross gave you, you can look for the correct one

How can I boost my wireless broadband,

Since moving to BT, i have had issues with interupted broadband and range of wifi is hopeless. how can this be improved?? I have had little success on the phone to india, one suggestion was a very long ethernet cable!!!

you can try downloading inssider2 (istumbler if MAC) and then run it. This will show the broadcasting networks round about you and their channels including your own. If you then enter your router and change your wireless channel to a free or less congested channel.
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

How can I boost signal by extending a wireless network?

I have an Airport Express serving Wi-Fi and Airplay in my living room, and the signal is just strong enough that my devices will remain connected all the way in my back yard, which would be great for outdoor parties but the signal isn't strong enough to stream reliably. I thought I could resolve this problem by getting a second Airport Express to extend my wireless network and it would act as a repeater. However, it doesn't work when my devices (specifically an iPhone 4S) will not disconnect from the first Airport Express.
Is there another configuration I can use to get a more reliable Wi-Fi network in my back yard, one that doesn't require stringing an ethernet cable between the Airport Expresses? My base station is stuck in its location since that's where my cable modem and stereo are. Thanks!

Okay, after further experimentation, it appears the iPhone's Wi-Fi refuses to even recognize the existence of the extending unit. I walked out to the neighboring field, far enough away that the base station's signal cannot reach, but the extending unit still has line-of-sight. The MacBook has about -77 RSSI from the extending unit (verified BSSID is that of the extending unit with Airport Utility) and decent throughput - I was able to load a webpage rapidly - but the iPhone cannot find my network at all.
I also walked to the far end of the field with the iPhone, power cycled it, and performed Wi-Fi scans as I approached my house. It did not detect my network at all until it could connect to the base station, which I could verify in Airport Utility where it shows the iPhone connected to the base station unit and only the Macbook (still sitting under the extending unit) connected to the extending unit.
Anybody know how I can fix this so that I can apply the suggested workaround (power cycle the iPhone when outside of range of the base station but within range of the extending unit)?
Firmware checks verify all devices have the latest firmware. 7.6.1 for the older, extending Airport Express, 7.6.2 for the new hockey puck base station Airport Express, and 5.1.1 for the iPhone.

How can I boost reception?

I have an ibook G4. My neighbor has made available his internet connection via wifi. The signal strength is too weak. Is there a way I can boost my reception? He is not keen on strengthening his signal.
I've seen the QuickerTek $200 solution. A little too much. I've seen how PC's can use a USB wifi device mounted in front of a home made antenna. Very inexpensive. Is there a way to plug in to the AE card in my ibook if possible.
I've also read where the D-Link DWL-G122 USB wifi device will work with older macs but not with one that has an airport card. Ideally, I'd like to use a USB adapter in my ibook. Does anyone know of a model that will work with a mac that has an AE card?
Thanks for any feedback.
Greg
iBook G4 14 Mac OS X (10.4.7)
iBook G4 14

I do not know if this would really help, but it might be worth a try. We have wi fi, but modem is on second floor, my mac is on first. I have an airport extreme card, but I also plugged in a wireless bridge (linksys WET 11 I think), and maybe it is my imagination, but I think it helped with speed. Bridges are not too expensive, and if it did not work you could.
Other people may of course have much better suggestions, esp. since you are using a laptop. But I thought I would throw this in just as a thought.
Good luck.

How can I boost the range of my router?

I have fios for phone/tv/Internet and use the Verizon MI24-WR router which works fine but my bedroom on the other side of the house doesn't get a signal. Any recommendation on improving the signal? I have the router in the office connected to the printer, PC and a"cable box" so moving the router would be a pain.
I have an old Linksys WRT54G that I could use as a booster but have no idea how to do that.
Does Verizon update router firmware? Replace older routers?

Firmware updates should happen automatically - login to your router and from here http:\\192.168.1.1
- advanbced - firmware upgrade to verify what version you have. From what I read routers are replaced based on issues you are having as well as your speed tier (75 Mb/s and up get the latest router)
I defer to the experts AFA extending the range of your WIFI please see http://forums.verizon.com/t5/Home-Networking/Actiontec-router-does-not-support-wireless-range-extend...
If a forum member gives an answer you like, please give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem. Thanks !!!
http://forums.verizon.com/t5/Verizon-net-Email/Fix-for-Missing-Inbox-sent-folders-etc-with-Internet-Explorer-11/m-p/647399

How can I convert a 0-50mA signal to 0-5 VDC for use by a PCI-6014 DAQ?

I have a PCI-6014 DAQ card. I am trying to measure the output of a closed-loop current sensor, which has an output of 0-50mA. When I tried using a 100 ohm resistor as a load (to measure across the resistor to get a voltage input for the DAQ) I get an AC voltage reading! I do not know how to convert the AC Voltage to a varying DC voltage. Most AC-DC converters output a fixed DC voltage (3.3V, 12V, 15V, etc.). Can the PCI-6014 measure the current directly OR is there a method to measure the VARYING 0-5 volt AC voltage? Please be specific, if possible. Thanks in advance!

Hello,
PCI-6014 can measure an AC voltage directly. The Test Panels in MAX will show the peak voltage level of a signal, and not the root mean square (RMS) voltage. For example, if you measure the 120 VAC 60 Hz sinusoidal waveform that is available from a standard North American wall outlet, you will see a wave with a peak of about 170 V.
The conversion between VRMS and Vo is VRMS = Vo/√2.
You will need to determine whether you expect your AC signal to be in units RMS or peak-voltage and make the conversion, if necessary, using the formula above.
-Arun V

How can I boost WiFi reception of my iPod Touch?

I recently purchased an iPod Touch to use solely with the Square credit card app. Unfortunately, at the location where I need to use it the most, I can received a WiFi connection even though I know there are some. Is there any thing that will boost WiFi reception on an iPod Touch.
Thanks for any help.

Momma Stasz wrote:
I recently purchased an iPod Touch to use solely with the Square credit card app. Unfortunately, at the location where I need to use it the most, I can received a WiFi connection even though I know there are some. Is there any thing that will boost WiFi reception on an iPod Touch.
Thanks for any help.
I am afraid there is not.

How can I boost ipad3's antenna signal reception?

Similar Messages

Maybe you are looking for