How can i boot my mac properly?
I am this troble with my macbook, when I started it up, it usally showing the logo of the apple and a loading gear, and mine does the same but the only thing i can't understand is that it takes a lot of time to load, maybe 10 to 20 minutes. And after that the logo of the apple is gone and was replaced by a circle with a diagonal line at the center. And I don't know what does that mean. Can anyone help me? And ohh that loading gear is still rotating.
The circle with diagonal means the computer cannot find a bootable partition. The long time for the circle to appear says faiing hard drive.
If it is running OS 10.6.1 as in your profile, You MBP should be old enough to have come with system DVDs that can be used to assess the hard drive. I sincerely hope you still have them.
Force-stop the loading process so the computer will not overheat. Otherwise you could be faced with a larger repair bill taht just an new hard drive.
Similar Messages
-
I have installed bootcamp by the bootcamp assistant and worked properly.
Then I have partitioned the OS X 10.8.2 and installed another Mountain Lion System and I have got two MAC boot options and Bootcamp disappeared from the Option menu. However, Bootcamp still remained in the Startup Disk in the System Preferences. When I tried to boot Bootcamp using the Startup Disk it did not boot and received a message that there is no bootable device. I have not lost any data and can read Bootcamp partition from both OS X systems. Please advise how can I boot Windows / Bootcamp again? Thank you.Recommendation 1: Use a VM for this. It's essentially a giant C.F. to do this with native booting, and is potentially fragile.
But if you're going to ignore that and do this anyway, realizing that it can break anytime in particular with OS upgrades, and that it's very difficult to impossible to resize the three volumes once you've installed the systems:
1. create three partitions, setting each to be the size for OS X copy 1, copy 2, and Windows respectively. The Windows partition needs to be set to MS-DOS format (actually FAT32) which later in the Windows installer you'll reformat as NTFS. Do not use Boot Camp Assistant to resize/partition the disk, it simply won't work for this use case.
2. install OS X copy 1
3. install OS X copy 3
4. Use gdisk (available at sourceforge) which is a command line only application, to create a new hybrid MBR adding only the last partition (Windows) to the hybrid MBR and setting it to be bootable. As a concequence you will not be able to see/share either OS X volume from within Windows. The Windows NTFS volume will be visible from within OS X.
5. Install Windows to the only partition its installer should see (confirm size), you'll need to format it NTFS first, and I suggest using the fast format option if available. -
i install windows 8 via boot camp but its corrupt so i recover this by the windows 8 by the help bootable usb which is helping me to install windows 8 but in recovery my osx is formatted automatically now its become a pc how can i install my mac osx again in my mac mini? please help me
If you have a Mid 2010 model: Computers that can be upgraded to use OS X Internet Recovery. If later then see below:
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
If you have an earlier model:
Clean Install of Snow Leopard
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
i created a windows partition that was too small and cant install windows... how can I boot on my mac drive to correct this... my computer is defaulting to the windows partion... tried f1 f7 f12... Help
Boot Using OPTION key:
1. Restart the computer.
2. Immediately after the chime press and hold down the "OPTION" key.
3. Release the key when the boot manager appears.
4. Select your OS X disk.
5. Click on the arrow button below the icon. -
How can I boot and run my Mac Mini on my 12" PwrBk display using firewire?
How can I boot and run my Mac Mini on my 12" PwrBk display using firewire?
bwhit:
Welcome to Apple Discussions.
No reason why you should not be able to do it using Firewire Target Disk Mode. Here's what you do:
1. With both computers shut down connect both via firewire.
2. Startup the Mini and hold down "T" key immediately after chime.
3. Startup the PB and immediately after chime hold down Option key.
4. Select second HDD icon on the screen and click on the right pointing arrow.
5. Computer will boot from Mini's HDD.
Be sure to shut down PB completely before shutting down Mini.
Please do post back with an update or with further questions or comments.
Cheers
cornelius -
I have lost everything on my mac, a gray screen with a folder and question mark is blinking. i hav another mac that is running slowly, how can I boot and reinstall os x Lion, i do not have the start up disc with me.
Welcome to the Apple Support Communities
Lion uses Recovery to reinstall OS X. Press Command and R keys when your Mac starts, open Disk Utility, erase the drive and reinstall Lion. The other Mac has probably got its hard disk damaged, so take the Mac to an Apple Store -
HT1661 How can I restart my mac book pro 11 inches when it's on target disc mode
How can I restart my mac book pro 11 inches when it's on target disc mode
Even if you could open Disk Utility you can't reformat a disk while you are booted from it. You will have to use the install CD. Ring the Apple Online Store at the number given at bottom left of this page and give them the serial number of your Mac. You should be able to get the Snow Leopard install disks for a nominal fee.
-
Hello,
I have a Mac Pro. Here are the specs :
Mac OS X 10.5.8
MacPro1,1
NVIDIA GeForce 7300 GT
When OS 10.6 came out, I found out that I couldn't upgrade to it because of my graphic card. In the technical specifications it is mentioned that :
OpenCL
requires one of the following graphics cards or graphics processors:
NVIDIA GeForce 9400M, GeForce 9600M GT, GeForce 8600M GT, GeForce GT 120, GeForce GT 130, GeForce GTX 285, GeForce 8800 GT, GeForce 8800 GS, Quadro FX 4800, Quadro FX5600
ATI Radeon 4850, Radeon 4870
Now, OS 10.5.8 is becoming more and more outdated. I would like to know how can I upgrade my Mac Pro ? What kind of graphic card can I put in ?
Thank you for any help and/or information !Dalfe wrote:
Hello,
I have a Mac Pro. Here are the specs :
Mac OS X 10.5.8
MacPro1,1
NVIDIA GeForce 7300 GT
When OS 10.6 came out, I found out that I couldn't upgrade to it because of my graphic card. In the technical specifications it is mentioned that :
OpenCL
requires one of the following graphics cards or graphics processors:
NVIDIA GeForce 9400M, GeForce 9600M GT, GeForce 8600M GT, GeForce GT 120, GeForce GT 130, GeForce GTX 285, GeForce 8800 GT, GeForce 8800 GS, Quadro FX 4800, Quadro FX5600
ATI Radeon 4850, Radeon 4870
Now, OS 10.5.8 is becoming more and more outdated. I would like to know how can I upgrade my Mac Pro ? What kind of graphic card can I put in ?
Thank you for any help and/or information !
It's been a while since I've used it but I installed Snow Leopard on my old Mac Pro 1,1 with the 7300GT and it worked. OpenCL may not have but the rest of it did. I don't think what you've quoted says you can't upgrade but only that an upgrade won't deliver all of the features in Snow Leopard. Indeed, I was able to move the HD in the 1,1 Mac Pro into the 5,1 Mac Pro, boot from it (10.6.4 is the minimum the 2010 Mac Pro will boot with), clone it and then updated it. -
MacBook pro does not start. How can I back to Mac OS X Lion?
I have a MacBook Pro. On my MacBook i made three partition, then I installed window 8. After that I started windos and try to delete third partition by Administrator tool from windows operating system. After that my MacBook does not start. How can I back to Mac OS X Lion?
After that I again install windows 8 from a DVD. Windows start well, but I can not start Mac OS system, may be it was 10.6. Sever times I tried to install OS X Lion 10.7 thought DVD, I could not. On MacBook I have a lot of important data.
What can I do. I want to a complete suggestion. Please help me to solve the problem.
My MacBook Pro model no. A1286.You installed Windows improperly the result of which was to wipe out the bootloader for OS X. You can give this a try:
Boot Using OPTION key:
1. Restart the computer.
2. Immediately after the chime press and hold down the
"OPTION" key.
3. Release the key when the boot manager appears.
4. Select the OS X disk icon from which you want to boot.
5. Click on the arrow button below the icon.
If you are still unable to boot from the OS X volume then you will need to reinstall OS X:
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
This will destroy the Windows bootloader so you cannot boot into Windows. The solution is to remove all the partitions on the drive except the OS X partition, then expand the OS X partition to take up the entire drive.
Use Boot Camp Assistant in the Utilities folder to create a Windows partition on which you can install Windows. You cannot have any other partitions on the drive besides these two.
Now given all the above you may be able to install a third-party bootloader that would work with the setup you now have: Boot Runner 1.4. -
I've overwritten my Mac OS with Windows Vista, how can I get my Mac OS back
I Was downloading a Windows Vista OS on my Mac and I accidentally deleted the Mac OS. How can I get my Mac OS back? Can I use the CD's accompanied with my MAC
when I put the DVD to Install the MAC system from vista...It doesnt give an option for ordinary installtion but it gives me an option for remote installtion (which it needs an network or internet connection or something like that...) what should i do ??
:(:(You need to repartition the drive. While booted from the DVD, select Utilities > Disk Utility from the menu bar. In Disk Utility, select the boot drive from the list on the left. It will have a long name starting with the capacity in GB. Click on the Partition tab. Choose "1 Partition" as the volume scheme. Click on the Options button near the bottom of the window, then click on the button labeled "GUID Partition Table." Finally, click Apply. When the partition finishes, you can quit Disk Utility and go back to the Installer. You should now see your internal drive as available for installation.
-
My MacBook Air lost mac os x. So I would like to reinstall mac os. But I can't select the disk to install mac os x. Only Recovery HD is shown and I can't select it. How can I reinstall my Mac os x? Thank you!
you can download the mac os x recovery hd and run the setup to a flash drive using another mac computer running os x 10.7,(so that while installation the os x setup can varify your computer's serial no. and provide you the installation setup through internet)
or the time machine backup(if you have)
Now boot through the flash drive and follow the steps to install mac os x
here is the link to download the recovery hd for flash drive
http://support.apple.com/kb/DL1433
see this before you download
http://www.apple.com/macosx/recovery/ -
How can i get mynew mac mini to use the drive in my old mac pro
When I first got my new mac mini it dosen't have an internal drive. So I hooked it up on the network and fire wire. I could use the superdrive in the mac pro just fine both itunes and the dvd player worked as they would with a internal drive. But now a couple of upgrade down loads later not so much. yes I can connect with screen share and can get the dvd player to play dvd's but still can't get itunes to use the superdrive. Iht exect disk icon in the apple menue bar use to open and close the super drive but now it reads "no disk" How can I get my mac mini to automaticly use the superdrive when i turn on the mac pro.
I've done all the easy things changing the order of start up and share settings and i sware it did work ok when i first hooked it up.http://www.totalapps.net/mac/remote-disc-sharing-when-the-superdrive-doesn’t-wor k-2/
Mind you, booting off the external optical drive of another computer may not be practical because of the different operating system limitations of the computers. I would just purchase an external optical drive from http://www.macsales.com/ if you find it doesn't work. -
When I insert a photo from iphoto into imovie, the photo that appears is different from the one that I inserted. Why is this and how can I make it work properly?
WHat version of iMovie, and iPhoto?
THIs forum is for iMovie iOS (iPads, iPhones).
Are you talking about iMovie for Mac? -
I tried partitioning my HD to install linux, the installion was not successful and now I can't boot my mac, I tried internet recovery, it was not helpfull as the disk utility cannot delete the partition I created. It was only showing me an error message "EFI files are missing", I realized that it is trying to boot from the new partition I created for the installation of the linux I intended to do.
It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.) -
How can a reset my mac to factory settings.
How can a reset my mac to factory settings. I have done something wrong and I think at this point it would be better to start form scratch
Restart holding both the Command and R keys. That will boot the machine to the recovery hard drive, a hidden partition that starts cleanly to the Mac OS X. You can then choose from the Utiltities drop down, Disk Utility. From that you can format the hard drive...you will then have to choose to Reinstall Mac OS X...doing this erases the hard drive and you lose all content. Make a backup on an external hard drive first so you can restore your applications and so you don't lose your data.
Maybe you are looking for
-
Is there a way to upload music that I have saved on my computer it my ipod touch or is uploading from iTunes the only way to upload music? I didn't see anything in the user guide on how to do this.
-
Quick back story: about a month ago my macbook was falling and I caught it quickly, I had a game controller in my hand and it lightly hit it whilst I was catching it; the laptop made no contact with the floor, couch etc. Upon reveling in my epic ma
-
Error code: 0xc0000001 file: \windows\system32\winload.efi missing or contains errors
I have a new 2 month old(Aug 2014) hp eliteone 800 all in one computer running win 8.1 64bit. i have two 1 tb hard drives raid configuration. left computer on for an afternoon and when I came back it was off mysteriously. tried to turn on and it att
-
After Downloading itunes 8.2.1, I get the application could be opened error
Guys, After downloading itunes 8.2.1 I get the following message when I try and open open itunes... "The itunes application could not be opened. An unknown error occurred (13008)" I WOULD SUGGEST NOT TO DOWNLOAD THIS UPDATE UNTIL APPLE HAVE FIXED IT!
-
Satellite L300-17L - don't see any wireless networks detected
Hello all, I just bought a Satellite L300 - 17L. All drivers seem to work except for the wireless card. First, I installed the driver pointed by this site but I discovered that the card is actually an Intel Pro 3945 card, not Realtek as specified in