How can I boot my PXI controller into real-time without a floppy disk?

My PXI controller is in a lab which has intense magnetic fields that could corrupt the floppy disk used to boot the PXI controller into the LabVIEW Real-Time (RT) Operating System. How can I boot the PXI controller into real-time directly from the hard drive?

If you are using LabVIEW 5.1.2 Real-Time (RT), launch Remote System Explorer and select Disks >> Create Format Hard Drive Disk. If you have LabVIEW 6 RT, launch the Measurement and Automation Explorer (MAX) and select Tools >> RT PXI Disk Utilities >> Create Format Hard Drive Disk (LabVIEW RT 6 has not be released yet). Once you have created the disk, boot the PXI controller with the Format Hard Drive Disk, and this will format the PXI's hard drive and install the real-time OS boot loader. Now you can reboot the PXI without a floppy disk and configure the PXI using Remote System Explorer or MAX. Be aware that this will remove all information from the hard drive, including other operating systems.

Similar Messages

How can I convert my Tiger DVD into a CD without spending more money?

How can I convert my Tiger DVD into a CD without spending more money and time? I've spent over seven hours trying to upgrade an iMac 350 Hz OS 9.1 to Tiger. I have changed the iMac firmware to 4.1.9, but found that my Panther disc was only an OSX Upgrade, although the 3 cds are labeled as Installation Discs. Since I have a Tiger disc I thought I would use that. Unfortunately, my iMac only reads CDs, not DVDs. I tried networking the iMac to my G5, but upon shutdown, the OSX disc cannot be accessed. I copied the DVD files to my iMac hard drive, but again, the OSX disc cannot be accessed after shutdown.
Is there a way I can burn a CD from the files of my Tiger DVD to get this task accomplished?

Excuse me, but I never thought of that, nor did I have any intention of trying to rip off your company.
I purchased four iPods for my family this Christmas. I have six iMacs just sitting around not being used. I thought that I would turn one into an iPod work station, so everyone can use one computer to recharge and hook up to iTunes 7.
Unfortunately, iTunes does not work very well in OS9. Apple decided not to continue to support OS9 very well. I’ve spent several hours attempting to upgrade the iMac so I could set up iTunes 7. Unfortunately, my 3 Panther Installation Discs were mislabeled, and did not allow me to install OSX over OS9. My OSX 10.2.7 Installation Disc is a DVD, and my Tiger Installation disc is a DVD. Neither usable to update the iMac.
All I want to do is set up a dumb iMac as a network interface to my G5 because I've use all of the G5's ports for our recording studio and the iPods need external power source if they are plugged directly into the G5.
If you could show me an easier way to run iTunes 7 on the iMac I wouldn't be as ****** off as I am at Apple for not supporting the 9 older computers I own with usable help and upgrades.

How can I merge my iCloud accounts into one account without losing data?

How can I merge my mistake iCloud accounts into one account without losing all my info?

You cannot merge accounts
iCloud Support
http://www.apple.com/support/icloud/

How can I change a Mixer filter in real-time? (11.5)

Hi all,
I'm currently coding (or trying to code) an interactive soundboard that users can play with in their software. They can turn inputs on and off, increase the volume, change the EQ, etc. The nice is, and I was really pleased to discover this, Director already has a feature called an 'Audio Mixer' that has filters to satisfy all these functionalities! The bad thing, I can't figure out how to change these filters in real time.
For example, here's the code to MUTE a specific mixer (activated when the user toggles a button):
member("channelOneMix").mute()
But how do I tell it go INTO that mixer, find the existing High Pass Filter, and change the value of that High Pass Filter's 'highCutOffFreq' property? It's a classic case of knowing exactly what I need to tell the code to do, but I have no idea of the SYNTAX of actually telling it to do that.
I hate to be 'that guy', but it is somewhat urgent. This is for a college assignment due Wednesday (yikes!). I didn't quite know what I was getting myself into with this code, but the end is in sight if I can figure out how to write this particular code.
Many gratuitous thanks in advance for any assistance!
PS: It won't be enough to simply add a new filter to the list. The user needs to be able to turn a dial up or down to increase or decrease the High Pass Filter, in conjunction with several other dials manipulating other filters. I need to be able to actually change what the filter's value is.

Thanks for your help!
The problem is that I think that I changed the "default" name for the state where the photos were taken. I have 50 differents locations, that are all correct, and photo per photo, I can modify the original location, but only at "local" level.
How can I change the name displayed in State section as "Casa David i Mireia" for "Catalunya" that is the real name for the State where the photos where taken?
I don't if this post is comprehensive. I'm not sure.
Thanks for your time!
Jordi

How can i know more trouble shooting issues/Real time problems and thier solutions?

Hi to every one.
i am Technician in a reputed mnc company. I am new to Microsoft servers. I learned MCSE 2008 and have basic trouble shooting knowledge.To improve my knowledge on these servers and how can i know real issues in a company occurs , solution to them. Please
help me to get more knowledge on these servers.
I am waiting for your reply.
Thanks & Regards,
Praveen

If you want to know more about issues related to your own internal servers, I'd simply start by reviewing the event logs and running perfmon in the short term to look for issues. For more long term management and monitoring I'd look to a tool
like System Center Operations Manager:
http://technet.microsoft.com/en-us/library/hh205987.aspx
For general troubleshooting skills growth, I'd stick around these forums and just read issues as they occur and try to assist with resolving some that you feel you can.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

How can I download the software for a second time without a backup but with the serial number?

Hi guys,
stupidly my hardware got broken and I've missed to do a backup for the programs. May it's a stupid question but how can I download the Lightroom software for a second time? I've got the serial number for this, but can't find a link without buying it again....
Thanks a lot for your help!!!!
Cheers,
Hannah

Lightroom - all versions
Windows
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
Mac
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh

How can I extract the data from a Real-time Execution Trace ".log" file?

I would like to get the data for the traces from the Real-time Execution Trace toolkit ".log" file to read in Excel and generate a report.

Hi Chuck,
Have you tried reading it into a text or binary file first and then generating a report using the Report Generation VIs?
Ipshita C.
National Instruments
Applications Engineer

HOW CAN I ACQUIRE AND DEPLOY DATA IN REAL TIME WITH DAQ 6024E?

HI ENGINEER,
I'M PROGRAMING AN APLICATION WHICH I NEED ACUIRING AND DEPLOYING AN ANALOGOUS SIGNAL IN REAL TIME.
I HAVE:
LabVIEW 7.0
WINDOWS 2000
DAQ CARD 6024E
THE SIGNAL I WANT TO ACQUIRE IS 0-10 Vcd FROM A SENSOR, THE PROBLEM I HAVE, IS THAT I AM ACQUIERING THE DATA AND IT SEEM THAT THEY ARE UPDATING EACH SECOND, BUT I HAVE BEEN MOVING THE PARAMETERS SUCH AS TASK TIMING IN THE DAQ ASSISTANT VI AND NOTHING HAPPENS.
CAN YOU TELL ME WHICH PARAMETERS I HAVE TO MOVE TO AQUIRE AND DEPLOY DATA IN REAL TIME

Hi barron,
If you want to see the data update quicker, you can decrease the value in the "Samples to Read" field of your DAQ Assistant. This number controls when data is transferred from the DAQ buffer to the PC. If the sampling frequency remains the same, but this field decreases, it means the buffered data will be returned more quickly.
Hope this helps.
Thanks,
Lesley Y.

How can I copy a mailing list into address book without having to type them individualy

Hi
I have a mailing list and I would like to send emails to everyone on the list in one go, I copied and pasted the list into my email, but can I have this group somewhere so that I can just call it up like an ordinary address from the address book, preferably without having to type every name individualy into the address book. I tried making a group in the address book and pasting the list in without success,if this is possible can some explain how I can acheive this
Thankyou
Richard

Richard,
Unfortunately, you have to add them one at a time - wait a sec... oh, yeah, if the contact is in your contact list it will 'auto-fill' as you begin to type. So if I want Wendy Whatshername, all I have to do is type Wen and the contacts will show up for you to select and auto-fill the name and email address.
Hope this helps,
Clinton

How can I place a transparent psd into Illustrator CS4 without effecting my spot colors?

So, I'm very naive about printing processes and am working with an online book building company. I've asked them how I need to fix this, but don't expect great advice from their design team.
When saving in Illustrator, I've been receiving the error:
"When spot colors are used with transparency, changing them to process colors outside of illustrator can generate unexpected results."
This effected the printing because it left a halo in the shape of the placed transparent .psd. So I need to know how to flatten the transparent psd or something in order to not have it effect the colors below it.
Thanks!

Thanks Monika and John. I've been working in Spot colors simply because my client has limited my palette for the screen printing we've been doing on ceramics in the past. Now we want this book to match the colors on the ceramics. But if Pantone bridge back to CMYK would work, I'll do it. I have been saving to PDF by making a combined pdf directly from the .ai folder. My links are all embedded.
Is there a way to convert all the colors in the document to CMYK at once? Otherwise I'm looking at a very long week.

How can export html from muse right into the folder without domain?

When i watch video tutorials there's no inquiry for domain but in ''my'' muse there is so i cant just save an html

I have no idea WHY the domain name is asked for at Export as HTML. The name seems to serve no purpose. I just enter a bogus name [xxx.com] pick a Location. I then use FTP client to send to host in any folder/directory I name using said FTP client.
Screen shot of folder. The asked for domain name is no where to be found and seems to have NO bearing on FTPing to host.

How can I create a Report with LabView Real-Time?

With conventional LabView, I can create Reports in HTML, for example to document Errors.
I need this feature in LabView Realtime. Is it possible?

It is possible, but you got to put a name to the file with an extension of three letters. i.e. errors.htm
Three letters on the extension is what the RT Operating system allows to use.
Then you will need to do an ftp to your RT machine and get the file and maybe change the extensions.
Not all the vis for Report generation can be used in the RT engine. The ones that use ACTIVE X will not work. i.e printting
Another way to generate reports and the most recommended is to use the host machine to generate the reports.
Regards,
Blasioz Valenzuela
National Instruments

My Internal HD became corrupt and it would not boot up so I installed My osx onto a new HD via usb and then inserted into my macbook pro but it wont boot up. It will only boot up if i connect via usb how can i boot it as an internal HD?

My Internal HD became corrupt and it would not boot up so I installed My osx onto a new HD via usb and then inserted into my macbook pro but it wont boot up. It will only boot up if i connect via usb how can i boot it as an internal HD?

Shootist007 wrote:
If the system won't boot from the new drive the OP bought and install OS X on it it certainly won't boot from the original drives Recovery HD partition.
Sorry genius.....but if the Recovery disk shows up that means the disk cable isn't bad. Could be he did have a screwed up HDD and when he put the NEW HDD in (after putting the OS on it via USB) the computer didn't reconize it and therefore didn't boot the OS. Just maybe right genius? Don't rush to criticize someone's recommendations until you realize other possibilities. (I did say "if it does")
Thank you

How can I load an external SWF into a movie clip that's inside other movie clip?

Hi.
I creating my first flash (actionscript 3.0) website but I'm
stuck with a visual effect I want to create.
I have a window on my website called contentWindow. Every
time you click a button this window is supposed to leave the stage,
load the requested content and return to the stage.
The sliding window is a movie clip with 83 frames, 21 to
enter the stage, 21 to leave the stage again, 20 for nothing (its
just to simulate the loading time) and 21 to return to the stage.
Now my goal is, when the user clicks on a navigation button,
the window exits the stage, loads an external SWF with the content,
and then returns to the stage.
I've the "window" movie clip with an instance name of
"contentWindow". Inside there is another movie clip with an
instance name of "contentLoader". The content that the user
requested should appear inside the "contentLoader".
Now, when the contentWindow leaves the stage, I get this
error message:
quote:
TypeError: Error #1009: Cannot access a property or method of
a null object reference.
at rwd_fla::MainTimeline/trigger()
If I switch
"contentWindow.contentLoader.addChild(navLoader);" for
"contentWindow.addChild(navLoader);" it works fine, but the
external SWF doesn't move with the window.
How can I load an external SWF into a movie clip that's
inside other movie clip?

Hi,
Recently, I have been putting together a flash presentation.
And I am just wondering if the following might help you, in your
communication with the said swf file:
loader.contentLoaderInfo.addEventListener(Event.COMPLETE,
onComplete);
function onComplete(event:Event):void
event.target.content.thinggy_mc.y -= 100;
Not the best example, but this allows you to target a mc
within an external swf file. I think if you look up this code, you
will have an answer ;)
Kind Regards,
Boxing Boom

How can I combine two itunes accounts into one?

How can I combine two itunes accounts into one?

Items purchased from the iTunes Store are permanently associated with the account from which they were originally purchased. Apple provides no way to change this.
However, if you wish to put content from two accounts into a single iTunes library, you can easily do so. Use the command File > Add File (or Folder) to Library.

How can I boot my PXI controller into real-time without a floppy disk?

Similar Messages

Maybe you are looking for