How can I cancel a printing task?

I began printing a tex in a HP Photosmart Premium from my iPhone, but I realized that the text is too long (97 pages). How can I cancel this printing?

Double press the home button on the iPhone and it will reveal Print Center.  You can cancel the print job there.  The printer may have a red 'x' that is shown while printing.  This red X will also cancel the job.
I was an HP employee.
Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

  • How do I cancel a print job from my computer to my HP Photosmart 7510. Touchscreen is unavailable.

    HP Photosmart 7510 All-in-One CQ877a Model C3112; Operating system Windows Vista 64-bit.
    Can't find how to easily cancel a print job. The touch screen is unavailable during the printing process (just shows the HP icon spinning around during the print process). There isn't a "cancel" button or touch area to cancel. We're wasting ink and paper by not being able to cancel jobs easily. Read the 24-page manual and it doesn't mention it. Looked on line for an answer, can't seem to locate one. Can always go to Start, Printers, and select the printer and then cancel from within there, but by then, the job is finished.

    There should be a cancel button (X) on the printer. Check out the pic below taken from page 7 of the User manual for your printer:
    http://goo.gl/mW7Fy
    Alternately, instead of going the Start button route, did you check out the Final tip at the bottom of the article?
    "Final Tip (Shortcut)
    Before using the method above to open the print queue, look for the printer icon in the notification area. If you see it, double-click it to bring up the print queue. "
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • How do I cancel a print job

    How do I cancel a print job

    Are you referring to cancelling print jobs from a computer, or from eprintcenter? If you let me know I can give you the steps to cancel a job.
    Jon-W
    I work on behalf of HP
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    Click the KUDOS STAR on the left to say “Thanks” for helping!

  • I don't have my disc to install hp6310 how can i install my printer without it

    how can I install my printer without my disc
    hp6310

    Hi,
    On the link below, select 'Software and Driver Downloads', select your operating system and then download the Full Feature installer.
    http://h10025.www1.hp.com/ewfrf/wc/product?product=1119598&lc=en&cc=us&dlc=en&task=&lang=en&cc=us
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • How can i change the print layout in i cal, how can i change the print layout in i cal

    Im a franklin planner user and would like to convert to ical.  How can I change the print layout in ical so I can print task on the left side and calendar events on the right side.

    Hi Mike3232,
    I'm afraid that it's not possible to adjust the print layout in iCal. Maybe you should think about changing to another program (BusyCal, etc.) that has the option to print the layout you want?
    Good luck!
    Michaël Duwyn

  • How can I make  a "print screen" on my iMac?

    How can I make a Print Screen of my iMac? Also catching only a portion of the video?

    Hello redlion53,
    It sounds like you would like to take screenshots of either the entire screen or a portion of the screen. This article outlines how to perform this function:
    OS X: Taking pictures of your screen
    http://support.apple.com/kb/ht5775
    Take a picture of your entire screen
    Press Command (⌘)-Shift-3. The screen shot is added to your desktop.
    Take a picture of some of your screen
    Press Command (⌘)-Shift-4, and then drag the crosshair pointer to select the area. Hold Shift, Option, or the Space bar while you drag to resize the selection area. To cancel, press Escape (esc) before you release the mouse button.
    Take a picture of a specific window
    Press Command (⌘)-Shift-4, press the Space bar, move the camera pointer over the window to highlight it, and then click.
    This works with open Finder windows and most application windows.
    To cancel, press Escape (esc) before you click.
    Take a picture of a menu
    Click the menu to reveal its contents, then press Command (⌘)-Shift-4 and drag the crosshair pointer over the area.
    To take a picture of the menu without the title, hover over the menu, press Command (⌘)-Shift-4 and the Space bar.
    To cancel, press Escape (esc) before you click.
    Additional Information
    In Mac OS X v10.6 and later, the screenshots are saved as PNG files on the desktop. They are automatically named "Screen shot (date and time).png".
    You can also take pictures of the screen using the Grab app.
    Some apps, such as DVD Player, may not let you take pictures of their windows.
    To capture a partial screen or a window selection to the Clipboard instead of a desktop file, use Command-Shift-Control-4.
    Thank you for using Apple Support Communities.
    All the best,
    Sterling

  • How can I clear the print queue?

    How can I clear the print queue on an iPad 2?

    Double-click the Home button to bring up the "recent Apps" tray. Find the Print Center icon in the tray and touch it to switch to it. You can cancel print jobs from there.

  • How can i find the printing program?

    hi
    i have sap script how can i find the printing program ?
    ami

    ami bardogo wrote:
    hi
    what is the different between the commands 'break' and 'break-point'
    thanks,
    ami
      h2 Breakpoints  h2
    Apart from being able to execute an ABAP program in the Debugger, you can also start the Debugger call by the choosing a breakpoint. This is achieved by setting one or more of these breakpoints in the program. A breakpoint is a signal at a particular point in the program that tells the ABAP runtime processor to interrupt processing and start the Debugger. The Debugger is activated when the program reaches this point.
    There is also a special kind of breakpoint called a watchpoint. When you use watchpoints, the Debugger is not activated until the contents of a particular field change. For more information, refer to the chapter Watchpoints.
    Breakpoint Variants
    The Debugger contains different breakpoint variants:
    Static
    A user-specific breakpoint is inserted in the source code as an ABAP statement using the keyword BREAK-POINT. A non user-specific breakpoint is set in the ABAP Editor using the BREAK user name statement.
    Directly set
    dynamic breakpoints
    Can be set in the ABAP Editor or the Debugger by double-clicking a line, for example. Dynamic breakpoints are always user-specific, and are deleted when you log off from the R/3 System.
    Breakpoints
    at statements
    The Debugger stops the program immediately before the specified statement is executed.
    Breakpoints
    at subroutines
    The Debugger stops the program immediately before the specified subroutine is called.
    Breakpoints at function modules
    The Debugger stops the program immediately before the specified function module is called.
    Breakpoints at methods
    The Debugger stops the program immediately before the specified method is called.
    Breakpoints at exceptions and system exceptions
    The Debugger stops the program immediately after a system exception, that is, after a runtime error has been intercepted.
    Static Breakpoints
    Static breakpoints are always user-independent if there is no specification of a user name. Once a user has inserted the statement BREAK-POINT or BREAK name in an ABAP program, the system always interrupts the program at that point for that user or only for the user name. This procedure is only useful in the development phase of an application when program execution is always to be interrupted at the same place. For more information, refer to the chapter Static Breakpoints.
    In HTTP sessions, a static breakpoint is skipped if you did not set additional dynamic HTTP breakpoints in the editor of a BSP page. Instead, a corresponding system log entry is written, which can be checked using transaction SM21.
    Dynamic Breakpoints
    Dynamic breakpoints are user-specific. Therefore, you should use them if you only want the program to be interrupted when you run it yourself, not when it is being executed by other users. All dynamic breakpoints are deleted when you log off from the R/3 System.
    Dynamic breakpoints are more flexible than static breakpoints because you can deactivate or delete them at runtime. They have the following advantages:
    ·        You do not have to change the program code.
    ·        You can set them even when the program is locked by another programmer.
    ·        You can define a counter that only activates the breakpoint after it has been reached.
    Special dynamic breakpoints are useful when you want to interrupt a program directly before a particular ABAP statement, a subroutine, or an event, but do not know exactly where to find it in the source code. Event here is used to refer to the occurrence of a particular statement, for example, or calling up a method. Special dynamic breakpoints are user-specific. You can only set them in the Debugger. For more information, refer to the chapter Dynamic Breakpoints.
    In HTTP sessions, the system stops both at static and dynamic breakpoints if a dynamic breakpoint was set in the editor of a BSP page before program execution.
    Lifetime and Transfer of Breakpoints
    A static breakpoint remains intact as long as the BREAK-POINT or BREAK-POINT name statement is not removed from the source code. Without saving, dynamic breakpoints only remain intact in the relevant internal session. However, they remain in effect during the entire user session if they are saved by choosing the menu path Breakpoints ® Save in the ABAP Debugger. For more details on the subject of user sessions and modes, refer to Modularization Techniques in the ABAP keyword documentation.
    If you call an HTTP session during a user session, only the HTTP breakpoints are loaded when the HTTP session is started. You activate HTTP debugging in the ABAP Editor by choosing Utilities ® Settings ® HTTP Debugging. Depending on the setting, the system then displays either the HTTP or standard breakpoints in the Editor.
    If you call an update session during a user session, breakpoints that were defined beforehand in the calling processing unit are copied to the new update session, where they can be displayed under Breakpoints. If, in the ABAP Debugger, you check Update Debugging  under Settings and then, for example, call the update module func using CALL FUNCTION func IN UPDATE TASK, a new window is opened in which you can debug this function module in the update session. All the breakpoints that were set in the calling processing unit can also be processed here.
    For further information on special breakpoints, refer to:
    Breakpoints at Statements
    Breakpoints at Subroutines
    Breakpoints at Function Module Calls
    Breakpoints at Methods
    Breakpoints at System Exceptions
    h2 page  break h2
    WINDOW TYPES
    When defining a layout set window, you must select a window type for the window. You can choose between three types:
    • Constant windows (CONST)
    • Variable windows (VAR)
    • Main windows (MAIN)
    CONSTANT WINDOW
    A window of type CONST has the same contents and size on all layout set pages, on which a corresponding page window is defined. This allows the processing of the window contents to be optimized internally.
    Page windows whose allocated window is of type CONST must have the same size throughout the layout set. If a window of type CONST is full, all remaining text the application program wants to output in this window, is lost. Constant windows do not trigger a page break. In other words: all text exceeding the window size is simply truncated.
    VARIABLE WINDOW
    The contents of variable windows is processed again for each page, on which the window appears. The system outputs only as much text as fits into the window. Text exceeding the window size is truncated; the system does not trigger a page break. Unlike constant windows, the page windows declared as variable windows may have different sizes on different layout set pages.
    As far as the processing of the window contents is concerned, the system currently treats constant and variable windows alike. The only difference is that constant windows have the same size throughout the layout set.
    MAIN WINDOW
    Each layout set must have one window of type MAIN. Such a window is called the main window of the layout set. For SAPscript layout sets, the main window has a central meaning:
    • It controls the page break.
    • It contains the text body that may cover several pages.
    • It allows to fix text elements at the upper and lower margins of the allocated page window (for example, for column headings).
    As soon as a window of type MAIN is full, SAPscript automatically triggers a page break and continues to output the remaining text in the main window of the subsequent page. Page windows of type MAIN have the same width throughout the layout set. The SAPscript composer thus avoids reformatting of the text after each page break.
    If a page does not have a main window, the system implicitly processes all other windows of the page and continues with the subsequent page. This page must not call itself as subsequent page (recursive call), since this would produce an endless loop. In such a case, SAPscript terminates the output after three subsequent pages.
    HOW THE COMPOSER WORKS
    The composer or layout set processor is the central formatting module for the print output. It prepares the texts for the different output devices by using the allocated styles or layout sets.
    Processing a layout set happens in a certain order. You must know some facts concerning the different window types, the setting of subsequent pages, or the dynamic control from within the print program.
    Page control in layout sets
    Define subsequent page statically
    Define subsequent page dynamically
    Format a layout set page
    PAGE CONTROL IN LAYOUT SETS
    SAPscript automatically triggers a page break as soon as the main window of one page is full. To be able to execute the page break, the system must know on which subsequent page to continue outputting the text. You can specify the subsequent page either statically when defining the layout set, or you can set the subsequent page dynamically during layout set output.
    If the subsequent page is not specified, SAPscript automatically terminates printing, thereby ignoring any other output statements of the application program.
    DEFINE SUBSEQUENT PAGE STATICALLY
    You define the subsequent page statically with the layout set maintenance transaction. First, specify the start page in the layout set header. The system automatically calls this page whenever the layout set is started. With this page, or, more correctly, with the page window of this page, the text output starts. For each page, specify the subsequent page in the page definition. After a page break, the system continues text output on the subsequent page defined for the last page. By specifying start page and subsequent pages, you can define a page sequence.
    DEFINE SUBSEQUENT PAGE DYNAMICALLY
    The page sequence set in the layout set definition can be changed by the application program dynamically at runtime. If you want the layout set to start with a page other than the one defined in the layout set header, specify the desired start page using the parameter STARTPAGE when you call the function module START_FORM. However, this new start page is valid only for the current call of the function module.
    If you want to break to a subsequent page other than the one specified in the page definition, use the control statement NEW-PAGE to set the name of the new page.
    NEW-PAGE .
    NEW-PAGE ends the output on the current page. The new subsequent page is only valid for the current call of the control statement. You can either include the control statement explicitly into the text of a text element or pass it to the layout set output using the function module CONTROL_FORM.
    FORMAT LAYOUT SET PAGE
    The process of formatting the output is controlled by the text contents in the BODY area of the main window. If the main window is completely filled, or if the control statement NEW-PAGE appears in the main window, the system executes a page break. Only at this point in time the system formats the contents of the windows of the other types and replaces the variables with the current values.
    For each other window, the system first outputs the default text element, if it exists. Then it processes and formats the list of the active text elements of this window, which you set using the function module WRITE_FORM with the parameter FUNCTION (SET, APPEND, DELETE). Any text that does not fit into the page window is truncated.
    As a consequence to this processing order of the composer, the reservation of space for the TOP and BOTTOM areas must be made beforehand. If the BODY area of the main window already contains text, a new text output to the TOP area does not appear on the current page but on the subsequent page in the TOP area. The same applies for the BOTTOM area. If the BODY area is filled to such an extend that the new BOTTOM text no longer fits into the current main window, this text appears on the subsequent page in the BOTTOM area.
    A frequent error in application programs is that for the subsequent page (for example, NEXT) of a layout set no main window is defined. If the formatted text of the previous page did not fit into the corresponding main window , the composer searches the subsequent pages for a main window to output the text remainder. However, if the subsequent page of NEXT is NEXT again, the composer encounters an endless loop.
    To be able to create correct page breaks in longer text, you should define a main window on each layout set page.
    LAYOUT SET CONTROL
    To output SAPscript layout sets, in the print program you must always start the output with OPEN_FORM and end it with CLOSE_FORM. The function module OPEN_FORM initializes the SAPscript composer and opens the specified layout set for subsequent output. The system combines all output for this layout set up to the CLOSE_FORM to one print request. If CLOSE_FORM is missing, nothing will be printed.
    To output data in a layout set, you must use the SAPscript function modules WRITE_FORM, WRITE_FORM_LINES, and CONTROL_FORM. You can use these function modules any number of times in any order between opening and closing a layout set.
    You cannot use the ABAP/4 statement WRITE to write output to a SAPscript layout set.
    Several print requests
    Start a layout set again
    Switch layout sets
    Find layout sets
    SEVERAL PRINT REQUESTS
    Within one transaction, you can open and close several layout sets using OPEN_FORM and CLOSE_FORM, however not simultaneously. You can use parameters in the OPEN_FORM to control whether the output is stored in the same print request. But also the SAP spool decides, depending on several plausibility checks, whether new output is appended to an existing print request or whether to create a new print request anyway.
    CALL FUNCTION 'OPEN_FORM'
    CALL FUNCTION 'CLOSE_FORM'
    CALL FUNCTION 'OPEN_FORM'
    CALL FUNCTION 'CLOSE_FORM'
    You cannot combine ABAP/4 list output and SAPscript output in one print request.
    START A LAYOUT SET AGAIN
    Usually a print program does not print only one urging letter or one account statement, but several layout sets for different customers. To have the output for each customer begin with the start page of the layout set, you must start the current layout set again and again.
    To start a layout set again, you must first end the current layout set and then open the layout set again. Within one print request, first call the function module END_FORM. It executes the final processing for the current layout set. Then start the layout set again using START_FORM. Output then begins again on the start page of the desired layout set.
    CALL FUNCTION 'OPEN_FORM'
    CALL FUNCTION 'START_FORM'
    CALL FUNCTION 'END_FORM'
    CALL FUNCTION 'START_FORM'
    CALL FUNCTION 'END_FORM'
    CALL FUNCTION CLOSE_FORM
    If you use START_FORM and END_FORM, you must not specify a layout set for OPEN_FORM. However, in this case you can use the SAPscript output functions only after opening a layout set with START_FORM.

  • How can I use the print module to print different size images on one large "canvas"?

    How can I use the print module to print different size images on one large "canvas"? An example would be in Photoshop, go to file>new, and create the size paper I want, and move images of different sizes onto it.
    I was thinking the print module would do this automatically for me.

    You can't, at present. It's been a requested feature, so we'll see if it shows up in a future version, but it's not there at present.

  • How can I open and print a unix E....le file

    how can I open and print a unix E...le file

    We have no idea what you're referring to. If you know how to use Terminal and the file has been compiled then it may run.

  • TS4009 I seem to have 2 iCloud accounts with different names - a free storage that came with my Macbook and one I used when I bought some iCloud space. How can I cancel the free account?

    I seem to have 2 iCloud accounts with different names - a free storage that came with my MacBook and one I used when I bought some iCloud space. How can I cancel the free account? Because of this I can't access iMatch and the ICloud account I paid for on my MacBook
    Any ideas cos its frustrating that I can't access something I paid for!

    Sign out of the account you do not wish to use, sign into the one that you do wish to use.

  • HT1541 How can I cancel an Itunes gift send by email?

    How can I cancel An Itunes gift send to an email by mistake?

    If the email account that you sent it to doesn't exist and it hasn't been redeemed then you can try contacting iTunes Support and see if they can cancel it : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • How can I cancel an old Imac from apple 5 computers for Itunes?

    hello from Italy
    I got a new MAC and I want to use it on my family account but on Itunes I already have 5 devices registred on an Itunes account, how can I cancel old devices?
    happy Christmas

    De-authorizing Computers (contributed by user John Galt)
    You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
      1. Open iTunes on a computer
      2. From the Store menu, select "View my Account..."
      3. Sign in with your Apple ID and password.
      4. Under "Computer Authorizations" select "De-authorize All".
      5. Authorize each computer you still have, as you may require.
    You may only do this once per year.
    After you "de-authorize all" your authorized computers, re-authorize each one as required.
    If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us.
    For more information on authorization and de-authorization: iTunes Store- About authorization and deauthorization.

  • How can i cancel my itunes account

    how can i cancel my itunes account and how can i make purchases using gift cards and not credit or debit cards?  it uses a credit card that i do not wish to use anymore.  i want to use only gift cards to make itunes purchases

    readerreed wrote:
    it uses a credit card that i do not wish to use anymore.  i want to use only gift cards to make itunes purchases
    Click "Account" under Quick Links at the top right of the iTunes store. Next to payment information click "Edit" and then select "None" under payment method.
    On an iOS device go to Settings>Store>Apple ID>View Apple ID>Payment Information>None.
    If "None" is not an option, you may want to contact iTunes support:
    http://www.apple.com/support/itunes/contact/

  • How can i cancel my icloud account ?, been slugged $25 and never used

    How can i cancel my unused /un -required icloud account ?, just been slugged a service fee of $25

    You mean you never created an iCloud account in the first place? How were you 'slugged'? - was this in the form of an email? Does it look genuine? You could copy and paste its contents here for examination but remove any personal data such as your email address.

Maybe you are looking for