How can I censor multiple areas? (without duplicating the video)

Hi,
I need to censor severall areas in a video. Usually I use the crop and mosaic method to censor videos, but in this case, I need to censor more than 5 areas and I would prefere to not clone the video like 10 times. Is there another method? Black bars would be fine too.
Thanks in advance.
....I'm using Premiere Pro CS6

You might find that instead of black bars, you can borrow a color from the video itself that would be less obvious. Reducing the opacity ever so slightly might work too, and possibly putting a little cross-hatch on the bars to compensate for the opacity.
All kinds of ways to skin this cat.

Similar Messages

HT5114 How can I create multiple accounts without the necessity to create multiple email addresses? I now have 2 i-phones (mine and my wife's#, 1 i-pad #mine#, 1 i-pad mini #10 year old's#, and 1 I-pod touch #11 year old's). I would like to maintain pur

How can I create multiple accounts without the necessity to create multiple email addresses? I now have 2 i-phones (mine and my wife's), 1 i-pad (mine), 1 i-pad mini (10 year old's), and 1 I-pod touch (11 year old's). I would like to maintain purchase control, but would like to be able to have a separate account ID for each person. Is that possible?

Each email address can only be on one iTunes account, and all purchases are tied to the account that buys them. If you want to have separate iTunes accounts on each then you will need separate email accounts for each iTunes account

I have three iPads and one iPod and one iPhone. How can I message between them without sending the message to all of them. You send the message to your email address but all of them are set up und one account.

I have three iPads and one iPod and one iPhone. How can I message between them without sending the message to all of them. You send the message to your email address but all of them are set up under one account.

You can have a different receiving email in the Messages app on each device : Settings > Messages > Receive At . I'm not sure that there is a different way to have the message only go to one device.

How can I select multiple photos without tapping on each one individually

How can I select multiple photos without tapping on each one individually?

Op: without tapping on each one individually
tap all the photos you want to delete.
Note what the OP is asking.

Everything on all the webpages are so small, and only take up half the screen. How can I make it bigger, without changing the settings on my computer and by that change the size of everything on my computer.

Everything on all the webpages are so small, and only take up half the screen. How can I make it bigger, without changing the settings on my computer and by that change the size of everything on my computer.

The Firefox [https://support.mozilla.com/en-US/kb/Page+Zoom Page Zoom] feature does a domain by domain level of saving the users preferred zoom level settings, there is no default Page Zoom level setting in Firefox, as with some other browsers.
Try the Default FullZoom Level extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/6965
Or the NoSquint extension: <br />
https://addons.mozilla.org/en-US/firefox/addon/2592/

How can I insert multiple page contents in the page layout properly?

I wanted to create 4 columns on the page layout. These 4 columns are of page contents.
After creating new web page based on that page layout, I attempted to enter 4 different inputs on all 4 columns.
Then, the result (from all columns) becomes the same.
Image - edit the web page based on 4 columns page layout:
Image - after edit & save:
How can I insert multiple page contents in the page layout properly?

First, I copied the HTML snippet for the Page Content on Sharepoint's Design Manger. The code of Page Content HTML snippet is shown below:
<div data-name="Page Field: Page Content">




<div id="ctl02_label" style="display:none">Page Content</div>
<div id="ctl02__ControlWrapper_RichHtmlField" class="ms-rtestate-field"
style="display:inline" aria-labelledby="ctl02_label"><div align="left"
class="ms-formfieldcontainer"><div class="ms-formfieldlabelcontainer"
nowrap="nowrap"><span class="ms-formfieldlabel"
nowrap="nowrap">Page Content</span></div>
<div class="ms-formfieldvaluecontainer"><div class="ms-rtestate-field">
Page Content field value. Lorem ipsum dolor sit incididuntet dolore.</div>
</div></div></div>


</div>
After I published the page layout, I found the code for Page Content from its ASPX page. The code is shown below:
<div data-name="Page Field: Page Content">
<PageFieldRichHtmlField:RichHtmlField FieldName="f55c4d88-1f2e-4ad9-aaa8-819af4ee7ee8" runat="server"/></div>
So, I attempted to create 4 columns by using 4 HTML snippets of Page Content on the same page layout. The page layout is generated from HTML file to ASPX file.
Then I edited some parts in ASPX page layout:
<asp:Content runat="server" ContentPlaceHolderID="PlaceHolderMain">
<table>
<tr>
<td style="width:70px;"> </td>
<td style="width:250px; text-align:right;">
<div data-name="Page Field: Page Content">
<PageFieldRichHtmlField:RichHtmlField FieldName="f55c4d88-1f2e-4ad9-aaa8-819af4ee7ee8" runat="server"/>
</div>
</td>
<td style="width:40px;"> </td>
<td style="width:200px;">
<div data-name="Page Field: Page Content">
<PageFieldRichHtmlField:RichHtmlField FieldName="f55c4d88-1f2e-4ad9-aaa8-819af4ee7ee8" runat="server"/>
</div>
</td>
<td style="width:25px;"> </td>
<td style="width:200px;">
<div data-name="Page Field: Page Content">
<PageFieldRichHtmlField:RichHtmlField FieldName="f55c4d88-1f2e-4ad9-aaa8-819af4ee7ee8" runat="server"/>
</div>
</td>
<td style="width:25px;"> </td>
<td style="width:200px;">
<div data-name="Page Field: Page Content">
<PageFieldRichHtmlField:RichHtmlField FieldName="f55c4d88-1f2e-4ad9-aaa8-819af4ee7ee8" runat="server"/>
</div>
</td>
<td style="width:175px;"> </td>
</tr>
</table>
</asp:Content>
The 4 columns for Page Contents appeared on the web page when I created new page using that page layout. But the problem is that all 4 columns displayed the same result from 4th column.

How can I add new games without overwriting the old ones?

I have just purchased two new games in the itunes store and although they are showing in the library (under applications) my previously purchased games are not. In Summary under games it will not let me choose selected games only 'all games' and when I press sync warns that the existing games will be replaced. How can I add these games without deleting the older ones? Also if I did want to remove a game from my ipod how do I do it?

hardlyquinn wrote:
Part of the problem is that I can never sync the whole thing as I dont keep all my music in my library (it seems silly to have my enture cd collection on the computer).
Clearly it ISN'T silly as it avoid issues like you are having right now. If you need more space, get an external hard drive. To me it is much sillier to only have your stuff on the iPod and no where else as the iPod, as a small portable player, is much more likely to be dropped, lost, damaged, stolen, forgotten somewhere, etc.
While I am not familiar with the use of games on the iPod (I have never bought any) you can switch the iPod to manually manage and then you can add content to your iPod without losing what is already there. Perhaps it works for games as well.
But long term, I strongly suggest you keep all your stuff in your library so if you need to (you have to perform a restore on the iPod, you lose it and buy a new one, etc.) you can very easily sync it all back to the iPod when needed.
Good luck,
Patrick

How can i create multiple accounts but use the same itunes?

how can i create multiple accounts but use the same itunes?

Hi iCloud is Making Me Go Crazy,
You will need to create a new Apple ID for your GameCenter and iCloud services. You can continue to use the current Apple ID you share with your Mom for access to iTunes Store purchases if you wish.
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
Frequently asked questions about Apple ID
http://support.apple.com/kb/HT5622
Cheers,
- Judy

I want to download an audiobook, but my daughter has a giftcard credit on the account. How can I download my audiobook without using the money from her giftcard?

I want to download an audiobook, but my daughter has a gift card on the account. How can I download my audiobook without using the money from her gift card?

go directly to your ibook app. and you're going to find it. it's only with ibooks app.
best
Olivier
<Edited by Host>

How can I download multiple apps without entering my Apple ID every single time?

How can I download multiple songs or apps without entering my Apple ID every single time?

It took me a moment to remember where this was!
1. Open the iTunes app on your Mac and Sign out of your account (Store menu.)
2. Without signing back in go to the iTunes App Store and buy a free app that you already have*.
3. A dialog box will pop up for you to sign into your account. When signing in, be sure to tick the box that says Remember password.
* You can choose any app that you wish, choosing one that you already have keeps you from buying any old app that you may not want.

How can I install Adobe Acrobat without installing the browser extensions?

Hello All,
I am a computer Technician at a high school and we have very strict browser requirements for different services. We need to use Adobe Acrobat to convert PDF's, and other tasks, and we need to use Chrome to open Adobe Reader files. The issue is that I want my 3 browsers (Chrome, IE, Firefox) to open PDF files using Adobe Reader XI. All my plugin settings are correct to use Adobe Reader to open PDF's, but it either downloads a PDF to the computer, or opens up in the browsers default reader (Chrome does this), or opens up to a blank page with a blank error message. I went into the programs Internet settings for Adobe Reader and Adobe Acrobat and it's telling me the browser opens them up using Adobe Acrobat (With no option to change the setting). The problem is only solved when I uninstall Adobe Acrobat.Then I am able to open PDF's in Adobe Reader just like I want (but this gets rids of Acrobat). This leads me to believe that when I install Adobe Acrobat, there is a registry key or something that is telling the computer to open PDF's in browsers using Acrobat. My initial question is this: How can I install adobe Acrobat without linking it to the browser. I JUST want Adobe Acrobat as a program installed on the computer.
Additional Info:
- I build a computer image and use that image on several computers. This issue persists with all of the computers I installed the image on.
- I am using Adobe Reader 11 (Now DC, but I am willing to use either) and Adobe Acrobat Pro CS3 (I think it's version 9?)
Thanks for the help.
- Charlie

No answer yet. Paging Acrobat support.... Where are you?

How can I delete multiple copies (600 ) of the same contact that ended up on my iPhone after backing it up on iTunes?

In syncing my iPhone 3GS on iTunes, I now have many copies of the same contact -over 1,000 in one case-on my iPhone. How can I delete these multiple copies without doing it one by one on my iPhone and how can I prevent it from happening again? I have Outlook Contacts and MSN contacts -- iTunes is supposed to be syncing to my Outlook contacts, but I don't have multiple copies of any of my contacts there. HELP! Thanks!

The cause was probably a USB glitch during a sync or when copying. The music resides on the phone in separate files. A master file contains a database with an index to the music, an entry for each track and a "pointer" to the file containing the track. Somehow the index got corrupted with duplicate entries. It's likely that the music itself wasn't duplicated, but some tracks had more than one entry in the database. I've seen this happen when syncing (rather than manually managing) also. In my case deleting the track from the Music tab in iTunes, syncing, then adding it back fixed it.
A related problem I've seen is an album may be split, with some tracks in each of 2 or more album entries in the listing. Fixed the same way.

How can I navigate through tabs without using the mouse?

I want to know how to navigate through tabs without using a mouse... just like you can navigate through multiple windows by using <alt><tab> ... because it's extremely annoying when I'm working on something to have to take my hands off the keyboard and go to the mouse.

You can also use Ctrl + Page Up and Ctrl + Page Down to go to the next and previous tab. I prefer those because it doesn't require the Shift key (Shift + Ctrl+ Tab) to go to the previous tab.
See also [[Tabbed browsing]]

How can I specify an area path for the work item created on build failure?

In our department we are working with multiple build definitions for different parts of one Team project. We heavily use the Team Project feature. Teams are defined by area path nodes, so each team can only see it's area path. No one (except the admins)
can see the root project node.
When a build breaks, TFS generates a Bug. Unfortunately, this bug is assigned to the area path root node, so nobody can see the generated bug and act on it.
We would prefer to specify the area path for the generated work item in the build definition (not template, but property of a build definition), as every build belongs exclusively to one team.
I have found that you can populate fields of the generated work item by filling the "custom fields" of the "create work item" activity. But how do I set the area path as a parameter?
Guenter

Hi Cuenter,
Thanks for your post.
You should set the value like below in that activity:
New
Dictionary(Of
String,
String)
From {{"Area
Path",
"teamprojectname\areaname"}}
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How can i create multiple apple ids from the same mac

There seems to be a limit on how many apple ids can be created from the same cpu. Trying to create 100 apple ids for a client to use on ipads distributed to employees i found i could only create three or four before i got the message account cannot be created, contact itunes support. Had the same problem creating multiple itunes accounts through the App Store.

I found this discussion because I need to create dozens of Apple IDs for the faculty and staff of the school for which I'm the IT Director.
This is weak.
Apple, PLEASE upgrade the Apple ID system so it represents the current needs and paradigm.
What am I thinking, Apple (like Google) don't follow user discussion forums, except by accident when an employee sees something and is motivated enough to carry the water for users in need.

How can I censor multiple areas? (without duplicating the video)

Similar Messages

Maybe you are looking for