How can I center the chart inside the portlet?

Hi,
I created a bar chart and published it as a portlet.
The chart is left-positioned inside the portlet which doesn't
look good. How can I center it?
Thank you in advance for your help.

Hi,
There is no way of centering your chart within a portlet.
Thanks,
Anu

Similar Messages

  • How can I edit the portlet

    Hi All
    I created the user. Initially there were no portlets. But i added a Portlet. Such as Login,etc. Once I login as that user i get displayed the added portlet. But how can edit the portlet as i might what to change the added portlet. There is no edit portlet link displayed. Is there any way for editing the same.
    ThanksVivek

    Last time I heard with Oracle they said the only way is to look at the current URL. If it contais _mode=16 then we are in edit mode.
    This is a function I use:
    FUNCTION inEditMode return boolean is
    bEdit boolean := false;
    begin
    if PORTAL.wwpro_api_parameters.get_value('_mode', 'qaz') = '16' then
    bEdit := true;
    end if;
    return bEdit;
    end inEditMode;
    Kind regards
    Tomas Albinsson
    Stockholm, Sweden

  • Can I center the text in vertical direction in JTextArea

    for example , if the JTextArea is 50 pixels high, and the text 's height is 20 pixels,
    then how can I center the text in vertical direction in this JTextArea which means
    there is a extra space whose height is 15 pixels over and under the text?

    Exactly what are you trying to do?
    JTextAreas are usually in a scroll pane, you add multiple lines ie height can change
    are you going to make it uneditable etc
    if it is just for a display (uneditable), perhaps a 'tall' JTextField might give you the desired effect

  • How can we capitalize the PR/PO, which are already booked in cost center?

    We are creating a capital Project for our department.  We have the structures ready and finalized with the budgets. But, the department has already done some commitments and expenditures in their cost center .Now, this expenditure and commitment values needs to be reflected in the report, so that correct values of assigned and available should be updated.
    1) Pls. suggest a process using which we can transfer this amount. Is this to be done by an FI entry or else we need to commit using sanction request?
    2) How can we capitalize the PR/PO, which are already booked in cost center?

    Hi,
    As we know the Contract is an Outline agreement for Quantity or Value for a particular Period with vendor.
    Without mentioning Plant also we can make contract for the Purchase organisation level for particular Material for the entire period
    Where as while creating PR  -it is an Indent for the material requiement for the specific Plant so when you refer Agreement inthe PR creation time System will ask you how much quantity to what plant you want to place indent. where as In PO  it ia an legal document so when you refer Agreement it will take all the details from Contract
    i think you are clear with my points
    With regrads
    Shrinivas gangoor
    Edited by: Shrinivas Gangoor on May 22, 2009 2:53 PM
    Edited by: Shrinivas Gangoor on May 22, 2009 2:54 PM

  • How can i remove the phone number from the text messages that i receive in the notification center

    how can i remove the phone number from the text messages that i receive in the notification center?

    You choose whether to see text messages in Notification Center or not.  If you elect to see them, they will display the phone number (unless they are from a contact in your contacts list).
    You can choose not to see them at Settings > Notification Center > Messages.

  • HT4314 I have two ipods in my house that were set up under the same email.  I have since assigned two different emails.  How can I change the game center account so that is not shared by both ipods because it is for two different users and they are not ha

    I have two ipods in my house that were set up under the same email.  I have since assigned two different emails.  How can I change the game center account so that is not shared by both ipods because it is for two different users and they are not happy?

    By "game center account", do you mean Apple ID?
    If so, you can change it.
    1. Tap settings and navigate to iTunes and App Stores
    2. Tap "Apple ID" and then tap "Sign Out"
    3. Log in with a different ID.

  • How can I change the background color of a chart?

    How can I change the default black background color of a chart to white?
    Thanks
    John

    Hello All,
    Another (and my preferred method) of bringing up the tools palette is to press
    <shift>+<Rt-Click>.
    Just another way to do something in LabVIEW!
    Travis M
    LabVIEW R&D
    National Instruments

  • How can I change the legend of a plot in an excel chart using LabView?

    Hi,
    My question is:
    I create a chart in Excel with LabView7 using ActiveX. There are 4 plots in one chart. How can I rename the legend (the name) of each plot with LabView?
    Thanks.
    Michi

    Use the SeriesCollection(1).Name function. In LV, wire up the following:
    _Chart into Method SeriesCollection (index = 1 to 4)
    Cascade into Variant to Data (wire type Excel.Series)
    Wire Series into Property Name, Write the string
    Michael Munroe
    www.abcdefirm.com
    Michael Munroe, ABCDEF
    Certified LabVIEW Developer, MCP
    Find and fix bad VI Properties with Property Inspector

  • How Can You Change the Look and Feel of Charts in OBIEE 11g

    How Can You Change the Look and Feel of Charts in OBIEE 11g?
    Edited by: user11973122 on Jul 18, 2012 12:13 AM

    Check these files
    OFM_HOME\Oracle_BI1\bifoundation\web\msgdb\s_blafp\viewui\chart\dvt-graph-skin.xml
    OFM_HOME\Oracle_BI1\bifoundation\web\msgdb\views\dvtchart\obips.dvtchart.xml
    OFM_HOME\Oracle_BI1\bifoundation\web\display\chartfontmapping.xml
    Pls mark correct or helpful if helps

  • How can i get the path to config folder placed inside the jar file?

    Hi i have developed an RCP application using eclipse.
    In my application config directory is there.
    When i export my RCP application as JNLP Project the jar file is created which contains config folder inside it.
    When i download the application using java web start , how can i get the path to config folder placed inside the jar file?
    Will the config folder exists in local cache in my system?
    Help needed.
    -Deepak

    -- This works in CS6:
    tell application "Adobe InDesign CS6"
      set myDocument to active document
      set selectedRectangles to selection of myDocument
      set theGraphicsLink to file path of item link of (graphic 1 of (item 1 of selectedRectangles))
    --> "Macintosh HD:folder/folder/filename.tif"
    end tell

  • How can I center it in the cell (above big sub-table)

    The "Cross Browser marquee II" at
    http://www.pafoscarhire.com/index.php
    how can I center it in the cell (above big sub-table) ?
    I try but layer goes to the center of page rather than center
    of cell , well ?

    Heh - can't imagine what that's about....
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Walt F. Schaefer" <[email protected]> wrote in
    message
    news:f53j7t$asj$[email protected]..
    >I got the same error Murray. And, I might add it was not
    centered. ;-)
    >
    > --
    >
    > Walt
    >
    >
    > "Murray *ACE*" <[email protected]>
    wrote in message
    > news:f53itb$adt$[email protected]..
    >> Internal Server Error
    >> The server encountered an internal error or
    misconfiguration and was
    >> unable to complete your request.
    >> Please contact the server administrator,
    [email protected] and
    >> inform them of the time the error occurred, and
    anything you might have
    >> done that may have caused the error.
    >>
    >> More information about this error may be available
    in the server error
    >> log.
    >>
    >>
    >> --
    >> Murray --- ICQ 71997575
    >> Adobe Community Expert
    >> (If you *MUST* email me, don't LAUGH when you do
    so!)
    >> ==================
    >>
    http://www.dreamweavermx-templates.com
    - Template Triage!
    >>
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    >>
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    >>
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    >> ==================
    >>
    >>
    >> "123polis123" <[email protected]>
    wrote in message
    >> news:f539js$9d$[email protected]..
    >>> The "Cross Browser marquee II" at
    http://www.pafoscarhire.com/index.php
    >>> how can
    >>> I center it in the cell (above big sub-table) ?
    >>> I try but layer goes to the center of page
    rather than center of cell ,
    >>> well ?
    >>>
    >>>
    >>
    >>
    >
    >

  • How can I show the chart in forms?

    Dear all:
    I want to create a line chart. I use the chart wizard and it is successful to create the chart. But, it can't show the chart when I run the form. How can I show the chart in form6i?
    Besides, I see a document that refer to 'OG.pll'.
    I can't find the OG.pll in form6i. Do I need 'OG.pll' to show the chart when I run the form? Thank you very much!!

    Hi Carlos,
    You can try to create a code node for check which signature to print.
    In global variable declare a variable ie named g_sign type TDOBNAME.
    Then pass this var to name of graphics &g_sign&
    please check and reply.
    regards,

  • How can I extend the range of my chart?

    I've asked this question before on here, and found that shift-clicking for more cells has usually worked, but I have now run into a new problem...
    My chart used to cover the range B5:P50. However, since moving a column it now only covers the cell range H5:P50. My chart is on a separate sheet. Usually if I want to add more to the range it will be downwards, so I just click on the chart, then click on the Main Sheet and shift-click to add more cells. Unfortunately, because the range I want is to the left of the highlighted area this time, I can't use shift-click.
    How can I extend the range of my chart so it includes cells to the left of the currently selected range? In Excel I'd be able to just type the range in a box somewhere, rather than all this GUI-based clicking and dragging which is actually more difficult! Is there somewhere I can just type the range in that I want?
    Thanks!

    "I want to add some series that are missing from the chart. How do I do that?"
    Here's a two step process to do that:
    Select the chart to show the the data selection on the associated chart.
    Click in the leftmost column of the data, and drag left to change (move) the selection (blue arrow) for the result below:
    Grab the control handle (small circle) at the bottom right corner of the selection, and drag  right, as indicated by the blue arrow.
    Result shown below.
    Reassign colours and do other formatting as desired.
    Regards,
    Barry

  • How can I find the center of the current view

    How can I find the center of the current view

    Oracle permitted renaming the snapshot in the earlier versions of 8i. However, it does not permit renaming the materialized view in 9i or 10g.
    SQL> rename mymatview to mymatview2;
    rename mymatview to mymatview2
    ERROR at line 1:
    ORA-32318: cannot rename a materialized view
    SQL> disconnect
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.2.0 - 64bit Production
    With the Partitioning, Oracle Label Security, OLAP and Data Mining options
    SQL> rename mymatview to mymatview2;
    rename mymatview to mymatview2
    ERROR at line 1:
    ORA-32318: cannot rename a materialized view
    SQL> disconnect
    Disconnected from Oracle9i Enterprise Edition Release 9.2.0.3.0 - 64bit Production
    With the Partitioning option
    JServer Release 9.2.0.3.0 - Production

  • How can I bring the recordset count inside the same recordset?

    I have a query inside a procedure where I'm paging the results.
    I dont know how to bring the total results inside the recordset.
    How can I bring the recordset count inside the same recordset?
    SELECT *
    FROM ( select a.*, rownum rnum
         FROM (SELECT
              FROM table
              ORDER BY id DESC) a
         WHERE rownum <= pg*50 )
    WHERE rnum > (pg-1)*50

    My query is much more comples, so that is why I'm using the other script.
    When I included the "COUNT(*) OVER() tot_cnt AS total" it didn't worked:
    ORA-00904: "TOT_CNT": invalid identifier
    What is the tot_cnt?
    SELECT *
    FROM (SELECT a.*, rownum rnum
    FROM (SELECT
    ed_fotos.id AS COD_FOTO,
    ed_fotos.arquivo AS NOM_ARQUIVO,
    ed_areas.nome AS NOM_REDACAO,
    COUNT(*) OVER() tot_cnt AS total
    FROM edt.ed_fotos ed_fotos
    INNER JOIN edt.ed_volumes ed_volumes ON ed_volumes.id = ed_fotos.volume_id
    INNER JOIN edt.ed_caminhos path_alta ON path_alta.id = ed_volumes.caminho1
    INNER JOIN edt.ed_caminhos path_baixa ON path_baixa.id = ed_volumes.caminho2
    INNER JOIN edt.ed_areas ed_areas ON ed_areas.id = ed_fotos.redacao_id
    ORDER BY id DESC) a
    WHERE rownum <= 200 )
    WHERE rnum >= 100

Maybe you are looking for