How can I change a JCo Server retry interval?

Hi all,
I have a question regarding the interval of connection retry.
If my JCo server has a exception, because SAP Server is down, I get following error: Server startup failed. Will try next startup in 1 second.
Then in 2 seconds, 4 seconds ..... 1024 seconds.
How can I change this parameter, so the server should try every 60 seconds?
Any ideas?
Thanks in advance.

Ok, I found a solution:
JCo.Server has a parameter: jco.server.max_startup_delay

Similar Messages

How can I change the real server convergence timer in LD ?

I have LD416(3.1.4) and configured 1*VIP and 2*Real server. looks it takes about 30 seconds to switching to the other real server when one of failure.
Q) How can I reduce the the convergence time?
Thanks,

I am not sure , but check with by configure the DELAY command and see if that helps resolve this.For related information on timers, could you refer the below URL :
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_configuration_guide_chapter09186a00800ca75d.html

How can you change data on a SQL 2012 application database that uses availability groups from BizTalk server?

If you use the WCF-SQL adapter it is recommend that you set UseAmbientTransaction to true if you are changing data. I think this requires MSDTC to be enabled on the SQL server that you are changing the data on. (http://msdn.microsoft.com/en-us/library/dd787981.aspx)
I think that Availability groups does not support MSDTC. (http://msdn.microsoft.com/en-us/library/ms366279.aspx).
How can you change data on a SQL 2012 application database that uses availability groups from BizTalk server?

Hi,
Yes, Availability groups doesn't support MSDTC. Please refer to the similar discusison which maybe helpfull:
http://dba.stackexchange.com/questions/47108/alwayson-ag-dtc-with-failover
http://stackoverflow.com/questions/17179221/msdtc-in-always-on-availability-groups

How can you change the banner of the FTP-server on the Linksys WRT610N ?

Dear readers,
My question is this : How can you change the banner of the FTP-server on the Linksys WRT610N ?
At present it says : "Welcome to WRT610 Router's FTP service" which gives away the type of the device.
Which is a clue I would rather hide. Besides that I would like to change it to something more personal.
But how do you do that ?
The UG is silent about this.
Regards
John

Try this to change FTP banner?
* Login as admin
* Open Internet Information Services (IIS) Manager
* Expand FTP sites (from tree view)
* Right-click on the particular FTP site, select Properties
* Click on the Messages tab
* Setup new message
* Save the changes

I have two personal e-mail accounts and a general account that I have synced to my Mail app, but I keep getting emails sent to the non-personal e-mail because they're on the same server. How can I change that?

I have two personal e-mail accounts and a general account that I have synced to my Mail app, but I keep getting emails sent to the non-personal e-mail because they're on the same server. How can I change that?

The only ways I know of for email to get sent to an account are:
1. It was addressed to that account. Someone used that email address to send you the email.
2. It was forwarded to that account by the account to which it had been addressed. I am not aware of Mail having this feature but it is often a feature provided by your ISP that you can turn on by logging into your account via the Internet and setting it up. I assume you have not done this, though.
With several email addresses in the same Mail client, you have to be careful which one you are sending from. If you send from the wrong address, any replies will come back to that same address. I make this mistake all too often.

How can I change the log file path instead of storing log in server.log

Hi,
I have created one domain and modified the attribute "log-file" in element "virtual-server" element to point to the new log file path.
But when I start up my domain, it still saying: "Log redirected to DOMAIN_LOCATION/logs/server.log.
Why?
Why it doesn't log to the file I specify? How can I change it?
Thanks.
Ken

I have changed the logging option to my specific path in admin console as what you said. I have also changed the logging in domains attribute too.
But still there is some logging info in domains/<dom_name>/logs/server.log instead of the path and file I specified.
Is it possbily related to linux user role setting? the Sunone AS is installed and configured by root user. But the domain is created for another user, hence I want to forward all logging info to that user's home path.

HT3610 my incoming mail server is not accepting my password. How can I change it?

my incoming mail server is not accepting my password. How can I change it?

Contact AppleCare and speak to someone in account security.

My Apple ID is registered in wrong email address. How can i change it or else when the server reply me to check my email that i can't check due to they sent to wrong email address...

Please give advice of how can i change my Apple ID (email address) as it is wrong address. Like i just update my iPhone to latest version 6.0, and get the new app, iCloud which need me to key in my Apple ID and Password. I have no choice to use the wrong email address as it is already registerd since from 1st day i use my iPhone. Then i received the reply that tell me to check my email for verifing but the problem is i can't check my gmail as they sent to the email is not my actual gmail address....
How can i solve this problem?

You may change your Apple ID to any email address that is not already used as another Apple ID, or that is not already associated with another Apple ID.
In other words, if I have an Apple ID [email protected], and have alternate email addresses of [email protected] and [email protected], none of them may be used by me or anyone else for an Apple ID, Rescue Email, alternate email, or anything Apple-related.
If the Apple ID link above indicates your email is already in use then it is. Use https://iforgot.apple.com, select Forgot your Apple ID? and provide the information requested. If the email address is one you created and can still access, you may be able to retrieve it. If it is one someone else created, you will not.

In system preferences my iCloud still shows my old internet mail address. How can I change it to my new internet address as I am now with a different server?

I have recently changed internet companies but in system preferences iCloud still shows my old email address. How can I change this or is it necessary?

If no one on this forum is able to help please post on the iCloud on my Mac forum.

HT201361 Is it possible to save the screenshot files to a different folder than desktop. How can I change the folder?

Is it possible to save the screenshot files to a different folder than desktop (that is the default). How can I change the destination folder? Thank you, Sal

To change the screenshot capture location to a new place on your Mac, first think of a location that would serve you properly. We like to place ours in a "Screenshot" folder located inside of the User's "Pictures" folder. To change the location to this new location, open the Terminal and enter the following command:
defaults write com.apple.screencapture location /Users/[u]/Pictures/Screenshots/
Replace "[u]" with the name of the user on your system. Once you have entered this command, let's restart the screen capture utility by restarting the SystemUIServer by entering the following command:
killall SystemUIServer
You can optionally log out and back in instead of entering this second command, thus restarting the SystemUIServer. Once restarted, all screen captures taken from here on out will end up in your /Pictures/Screenshots/ folder in the User's home folder on your Mac.

I updated my software in my iPad, can't connect to App Store or iTunes, It says that I have to change to US account, right now I'm in Mexico, how can I change it to mu US account.

I updated my software in my iPad, can't connect to App Store or iTunes, It says that I have to change to US account, right now I'm in Mexico, how can I change it to my US account

Back up all data.
Unlock the Network preference pane, if necessary, by clicking the lock icon in the lower left corner and entering your password. Cllck Advanced, open the DNS tab, and change the server addresses to the following:
          8.8.8.8
          8.8.4.4
That's Google DNS. Click OK, then Apply.
In Safari, select
          Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. If you’re using another browser, empty the cache. Test. Any difference?
Notes:
1. If you lose Internet access after making the above change to your network settings, delete the Google servers in the Network preference pane, then select the TCP/IP tab and click Renew DHCP Lease. That should restore the original DNS settings; otherwise restore them yourself. Remember that you must click Apply in order for any changes to take effect.
2. I don't use Google DNS myself, though I have tested it, and I'm not recommending it or any other DNS provider; the server addresses are offered merely for testing purposes. There may be privacy and technical issues involved in using that service, which you should investigate personally before you decide whether to keep the settings. Other public DNS services exist.

How can I change the default driver to OracleXADataSource in JDeveloper

Hello,
How can I change the default oracle driver: oracle.jdbc.OracleDriver to oracle.jdbc.xa.client.OracleXADataSource in JDeveloper Studio Edition Version 11.1.1.0.2, Build JDEVADF_MAIN.BOXER_GENERIC_090328.0229.5205.
If I modify the file connections.xml from jdeveloper\system\system11.1.1.0.31.52.05\o.jdevimpl.rescat2\connections in the sense that I change the driver class, then in JDeveloper when I test my connection I have this problem: Test failed: oracle.jdbc.xa.client.OracleXADataSource cannot be cast to java.sql.Driver
Why do I need this XA version of the oracle driver? Well I tried, from a book to reproduce the model of an application: entities, stateless and stateful session beans, mdb, web services and a client to test one part of the model.
And because of the JMS server I need an XA driver.
I deployed to the integrated wls 10.3 and when I test my client, if I use the default driver for the connection the an error message appears tell me either to emulate two-phase commit or to use XA driver.
My application works very well, if I configured in the console of the integrated wls 10.3 a datasource with the same name as my ide/application connection that has for the Driver Class Name: oracle.jdbc.xa.client.OracleXADataSource in the Connection Pool tab.
Thank you.

Open DIsk Utility and in the toolbar select Disk Image. The file selector will open and you'll have to do three things: 1) just as with any file, name it and point the file selector to where you want it to be saved, 2) near the bottom you'll see name - type iWork 2013 and 3) below that select the image size. Click on size, choose custom and type 1500 MB then click on the Create button.
Some time will pass and then you'll see an external disk pop up on your desktop and/or the Finder window sidebar. Drag the three programs into it and eject it like any other external disk. Now delete the programs from your applications window.
Where ever it was you pointed the file selector to you'll see the file you created. Double click on it and the disk image will mount again.

Cisco EIM 9.0.2- How can I change from e-mail address

Hello ,
We are using Cisco EIM/WIM 9.0.2.
I wnt to manipule my outgouing e-mail address basicly from e-mail address.
I can not find how can I do that.Can you please give me point for this case.
How can automatickly change this address on the agent console,
EX: I want to use [email protected]
We are using 2 server ,(1 server Web server,1 server app and db server)
Also we are using standalone integration
Thanks and Regards,

Yav,
Go to the Administration Console in EIM, then Departments. Inside the Department, there will be an Email folder, and inside that is Aliases. In the properties for each Alias, there is an "Email address" field.
-Jameson

How can I change the organization information on my trust profile?

I'm re-configuring Lion Server for a company who has changed their name, domain, etc.
I have everything updated SSL cert, Code signing cert wise to their new name.
However, the trust profile still has the OLD organization name. How can I change this?

Go to Settings>General>Reset>Erase all content and settings
The give him the iPod. It it already has iOS 5 he can set it up via iTunes/USB or wifi. It not then his has to set it up via iTunes/USB. If the iPod is a1G or 2G iPod make sure the iPod is connected to a charging source since the erase can take hours.

After the latest update, all my apple products reverted to an old icloud account. As it no longer exists, I cannot get into it to delete it and add the correct id. How can I change this, especially on my Macbook pro?

After the latest update, all my apple products reverted to an old icloud account. As it no longer exists, I cannot get into it to delete it and add the correct id. How can I change this, especially on my Macbook pro? There is no p/w related to it and even though I tried to reset "password" it won't allow as the id does not exist, neither does the email associated with the old id. How do I switch it to a newer id?

It's all rather odd because the old account cannot 'no longer exist' - if you don't have the correct password you won't be able to get into it, but you can't actually delete an iCloud account from the server.
I'm afraid you will need the services of iCloud Support. If you currently happen to have AppleCare, either because you recently bought Apple hardware or have paid to extend the inititial period, you can contact them here:
http://www.apple.com/support/icloud/contact/
You will need the serial number of the covered hardware.
If you are not covered by AppleCare, then - in common with other free email services - there is no free support and you may be asked to pay a fee.

How can I change a JCo Server retry interval?

Similar Messages

Maybe you are looking for