How can I change "All Inboxes" to two seperate inboxes.

How can I change "All Inboxes" to two seperate inboxes. My emails from two seperate accounts are merged in one inbox.

In the Mail app, tap on the Mailboxes in the top left of the screen.
That will show you all your accounts Inboxes
Hope that helps.

Similar Messages

I was in a Pages Doc and inadvertently had the Caps Lock on. How Can I change all the text I typed from Upper Case to Lower Case?

I was in a Pages Doc and inadvertently had the Caps Lock on. How Can I change all the text I typed from Upper Case to Lower Case?

Several protocols may be used.
Here I describe two of them.
(1) the one which I use : install and use the "Convert to Lowercase" service available in the free WordService
(2) copy your text, paste in TextEdit and enter the Edit menu.
I guess that you will recognize the items in your English menu.
I apologize but I don't know the English items.
Yvan KOENIG (VALLAURIS, France) jeudi 16 février 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.3
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k

How can I change all of (or more than one) speaker note to a voice at once?

Hello...
I have a lot of speaker notes that I need to apply a specific voice to. How do I apply the same voice to all of the speaker notes in the whole project at once? Or at least more than one? Any help would be appreciated. Thank you! I am working with Captivate 6.

Hi Vikram,
Thanks. That tip definitely helps! You just have to be careful when you use the CNTRL button and not highlight the name of the slide as you try to highlight the voices. If you do that, then the drop down box becomes “unclickable”. Unfortunately, when using the control button, it is sometimes impossible not to highlight the name of the slide as well.
Ryan
Von: VikramGaur [email protected]
Gesendet: Donnerstag, 20. September 2012 16:25
An: Scharfer, Ryan
Betreff: How can I change all of (or more than one) speaker note to a voice at once?
Re: How can I change all of (or more than one) speaker note to a voice at once?
created by VikramGaur<http://forums.adobe.com/people/VikramGaur> in Adobe Captivate - View the full discussion<http://forums.adobe.com/message/4713463#4713463

How can I change all the fonts at once on labels I downloaded from Avery?

How can I change all the fonts at once on labels I downloaded from Avery?

select all (Edit > Select All), then open the font panel by selecting the menu item "Format > Font Show Fonts". Now select the font you want.
I could only find Templates from Avery for Pages. I think my suggestion in still good but want you to know you posted this question in the forum for Numbers.

I recently bought my daughter an iPod 5th generation and quickly set it up with all my info ... E-mail , Apple ID etc. how can I change all of it to her name and new info without losing all her apps , movies and music ???

I quickly set up my daughters iPod with all my info ( e-mail , Apple ID and password ) how cam I change it all to new info under her name so she can have for her own ??

You will need to Erase the Device and Set up as New using her Apple ID.
Then... Sync her content...
SYNCING with iTunes
See here > http://support.apple.com/kb/HT1386
Note:
Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
Apple ID FAQs > http://support.apple.com/kb/HT5622

How can I change gmail inbox/sent items display from conversations to individual messages

I use an iPod Touch 5G with IOS 8.1 to access email using the GMail app.
I want to change the inbox/sent items display lists to show individual e-mail messages. I don't like the "conversation" display on my small screen. It is too hard to read important info in the thread.
I don't see anywhere in my app to change that type of display.
Thanks.

Go to Settings>Mail and turn off Organize by Thread. This applies to all mail accounts. It can be set to only apply to one account

How can I change all Inf elements in an array to a specific value?

I would like to change all Inf elements in my array to -1. Basically, I am looking for something similar to the range and coerce function, except that I want all values above a certain value to be a specific negative value, rather than go to that value.
I could use a case structure and go through each element in the array, but I am hoping to find something more efficient.Any ideas?
Solved!
Go to Solution.

P@Anand wrote:
I would do that in this way.
Here's a simpler version...
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Replace in Array.png ‏4 KB

How can i change all the purple links in safari back to blue

I am having trouble figuring out how to change the links ive visited in safari back to blue. I have turned on PRIVATE so now my links dont turn purple onces ive visited the webpage but i can't figure out how to remove/change the already visited sites from purple back to blue! help me pleaseeee xx

OK.
Go to SAFARI tab from the safari menu and "reset Safari"
You can keep your passwords, just uncheck that option.
once done that, quit Safari, here is the trick. CLosing the Safari Window doesn't quit the app, to quit it you can either go to "safari" tab on the safari menu and Quit safari or press control key on the keyboard and click on the safari app and quit. that will erase those purple highlighted links

How can I remove all content between two tags using Find/Replace regular expressions?

This one is driving me bonkers... I'm relatively new to regular expressions, but I'm trying to get Dreamweaver to remove all content between two tags in an XML document. For example, let's say I have the following XML:
<custom>
<![CDATA[<p>Some text</p>
<p>Some more text</p>]]>
</custom>
I'd like to do a Find/Replace that produces:
<custom>
</custom>
In essence, I'd like to strip all of the content between two tags. Ideally, I'd like to know how to strip the CDATA content as well, to return the following:
<custom>
<![CDATA[]]>
</custom>
I'd much appreciate any suggestions on accomplishing this.
Many thanks!

Thanks much for your response. I found David's article to be a little thin with respect to examples using quantifiers in coordination with the wildcard metacharacters; however, I was able to cobble together a working expression through trial and error using the information he presented. For posterity, here’s the solution:
Find:
<custom>[\d\D]*?</custom>
Replace:
<custom>
<![CDATA[]]>
</custom>
I believe this literally translates to:
[] = find anything in this range/character class
\d = find any digit character (i.e. any number)
\D = find any non-digit character (i.e. anything except numbers)
*? = match zero or more times, but as few times as possible (i.e. match multiple characters per instance, but only match one instance at a time, or none at all)
I’m still not sure how to effectively utilize the . wildcard. For example, the following expression will not find content that ends with a number:
<custom>.*?[\D]*?</ custom >
I'm presuming this is because numbers aren't included in the \D metacharacter; however, shouldn't numbers be picked up by the .*? expression?

HT1495 HOW CAN I KEEP ALL OF MY INFORMATION SEPERATE FROM THE OTHER USERS ON MY ACCOUNT?

We have two iphones and a ipad therefore I need to know how to make each item on a seperate account. Everyone's information goes on everyones electronic device. How can I fix this?

Have a look here...
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
Also... See this Discussion...
https://discussions.apple.com/message/17613637#17613637

How Can I change all User Passwords Within a Directory Instance

Hi Experts,
I've been asked to refresh an old directory instance with some production data. Easy enough I thought, however, the user has requested that all user passwords within the old directory instance are preserved. Is that at all possible? My chain of thought was that I can extract user passwords from the old instance into a file: -
# ldapsearch -D cn="Directory Manager" -w xxxxxxxx -b o=xxxxxxx objectclass=* userpassword > <name of file>
And then then use ldapmodify (or alike) to re-import the user passwords once I've refresh the old instance with the production data. However, to my knowledge, in order to modify a particular entry via a file, i'd need the following format: -
dn: gci=-1,ou=people,o=xxxxxxxx
changetype: modify
replace: userpassword
userpassword: xxxxxxxxxxxxxxxx
The only information I have in the file I created using the ldapsearch command above is as follows: -
dn: gci=-1,ou=people,o=xxxxxxxx
userpassword: xxxxxxxxxxxxxxxx
I don't want to have to edit the file and add the relevant missing entries accordingly as the generated file has somewhere in the region of 150 thousand entries.
Am I approaching this the correct way? Is there any other mean of achieving my requirement.
Thanks in Advance.

Hi,
It does not seem a big deal to add the missing lines to your output file.
For instance, the following awk command should do the trick
cat search.out
dn: gci=-1,ou=people,o=xxxxxxxx
userpassword: xxxxxxxxxxxxxxxx
cat search.out | awk '/userpassword/ {print "changetype: modify} ; print "replace: userpassword"; } {print $0}
dn: gci=-1,ou=people,o=xxxxxxxx
changetype: modify
replace: userpassword
userpassword: xxxxxxxxxxxxxxxx
Then you can use ldapmodify to apply your changes
-Sylvain

With Apple Remote Desktop How can I change all the computer names

After a re-imaging session?. I would like to not have to visit each station and manually change the computer name.
Is this at all possible using ARD?

Hi
I don't use DeployStudio and know nothing about it. In terms of simply changing the names? Yes. Clearly not in the same way. You could use what's built-in on OSX Server if you have it? System Image Utility allows creation of nbis with an associated workflow that can define workstation names from a pre-prepared list of MAC Addresses and desired names as a Post-Install Action.
This is fairly well-documented in the Server Forum and elsewhere.
HTH?
Tony

How can I change all the recipients in a PRE-PREPARED list from 'to' to 'bcc'?

I know if I type in the first recipient and hit 'bcc', the next one automatically changes if I'm composing a multiple-recipient email from scratch. However, I already have a pre-prepared sub-list in my Contacts folder. If I click on 'Write', all the names are there in the blank email and doing the above doesn't help. Any ideas, please?

Such a simple solution, but I never knew about the Contacts sidebar before! This has saved me so much time - thanks very much.

How can I change all the settings of a networked printer?

I have a Canon iP5000 attached to a mini in another room, and want to print over ethernet from my iMac. All is ok for basic printing, but for some reason I can't get to all the print settings on the networked machine that are available from the machine with the printer attached.
The implication of this is that I can't print photos from my iMac, as the "high quality" option isn't an option I can select. Currently, I have to create a pdf, send it over, and then print from the mini as I can see all the options from there.
Is it a driver issue (Canon don't list a 10.6 driver on their website) or a Mac OS issue?

In order for you to see all the additional Canon printer features (known as PDE's) you must have the same driver installed on the Mac sharing the printer and the Mac connecting to the printer share.
If both the Mini and the iMac are running OS X 10.6, then you can download the Canon Printer Update v2.3 from Apple and install on both Mac's. If either Mac is already using v10.30.3.0 of the iP5000 driver, which was part of the v2.3 Canon Printer Driver Update for Snow Leopard, then you just have to ensure the other Mac is using the same driver.
If one of the Mac's is using a version of Mac OS X other than 10.6, then please reply.

How can you change all of the control codes from one number to another?

I'm trying to use CC11 for Dynamic Expression Control, rather than just runing the volume CC7 all the time. My problem is that I would like to do a large select of say all CC codes that are 7 and move them to be 11 rather than do it one event at a time. Is there a technique for this?

Paul Kirk wrote:
My problem is that I would like to do a large select of say all CC codes that are 7 and move them to be 11 rather than do it one event at a time.
The Samplecontruct's recommendation is right and probably conformable if you want to process one or a few midi region(s) containing CC7.
In addition, if have multiple midi regions on a track and want to process in one step then the Transform window is recommended. I.e you select that track (which will select all regions), open the Transform and create the custom template I show in the pic below). Hit the "Select and Operate" (4) button which will select the matching contend (CC7) internally of the track selected regions and operate in one step. This saves time if you must select 50-60 regions and change their CC# using the Event list technique for instance.
!http://img695.imageshack.us/img695/3350/cc711.gif!
!http://img59.imageshack.us/img59/4967/aglogo45.gif!

How can I change "All Inboxes" to two seperate inboxes.

Similar Messages

Maybe you are looking for