How can I change default message encoding in Mail?

In Lion, most of my email messages in Simplified Chinese is encoded in iso-2022-cn, while I want them in gb18030 or utf-8. Instead of choosing encoding manually every time, can I change the default message encoding somewhere?

I think the only reliable way to do something like you want is to include something like a Unicode dingbat (range 2700)  as part of each message (i.e. in your signature).  That will ensure it goes out as UTF-8.

Similar Messages

  • How can I change the message for ( Find My I phone )

    How can I change the message on ( Find my I phone )

    I'm not sure if you can change the meesage but try here.

  • How can I change my iCloud my e-mail-account

    How can I change my iCloud my e-mail-account?

    Once you have created an iCloud account and chosen an @icloud.com address to go with it you can't change the address (short of creating an entirely new account).
    However, all is not lost. You can add up to three 'email aliases' - these are additional addresses (not accounts) which deliver into the same inbox as the main account. (In fact it's a good idea to give out alias addresses, rather than the main address, because if they attract spam you can easily change them.) (New aliases can only be @icloud.com ones; @me.com addresses cannot now be created.)
    You should be aware before you start that once you've created an alias you cannot turn that address into a full iCloud account, move it to another account, or reactivate it if you delete it.
    More information on aliases here:
    http://help.apple.com/icloud/#mm6b1a490a

  • HT201320 I have two email accounts. However, the iPad automatically uses the account that I only want to use for business. How can I change the account from which mail is sent and received?

    I have two email accounts. However, the iPad automatically uses the account that I only want to use for business. How can I change the account from which mail is sent and received?

    You are most welcome

  • How can I change default settings for font and size?

    How can I change my default font and size in pages?

    hi Ben,
    I found two files called AdobeDreamweaverSettingsPrefs  (.xml and.tmp)
    I removed them , emptied trash and restarted dreamweaver but the font stacks are sill missing.
    thank you for your suggestion,
    christos

  • How can I change default build time from 1 sec to .5 sec?

    Whenever I create a build, the default time is 1 sec. I'd like it to be .5 sec. I use a blank master slide. How can I change the default build time for all slides? Or can I?

    I'm sorry, but Apple does not provide a downgrade path for iOS. Because downgrading is unsupported by Apple we cannot discuss it on these forums, but you can use Google to find information on how to install an older version of iOS on any iDevice.

  • How Can I Change Default Zoom Settings For Safari?

    I just got my new iMac and hate the fact that everytime I open Safari everything is small and centered directly in the Safari screen.  How can I change the default settings so it either zooms in more or is in a landscaped mode so I don't have two big white patches on the sides of my window?

    The only way I know of, (and that I use) is as follows:
    Open textedit and create a new document.
    Add the following 3 lines to the file
    body {
    zoom: 175%
    Save the file as "somename.css". I called mine defaultzoom.css and saved it in Documents.
    In Safari go to Preferences | Advanced.
    In the Style sheet: dropdown box choose "other" and browse to the location of your somename.css file.
    That's it, now webpages will open with the default zoom level you used in the file (I use 175% but you need to tweak it for your screen size). Also, I do run into situations where some pages don't render correctly. If that happens you can go back to Safari | Preferences | Advanced and change the Style sheet dropdown box to none until you are done viewing that paticular website. Then just put it back when you are done.

  • How can I change the MESSAGE STYLE for messages?

    My customer complains about the big "X", as well as he thinks it's an error instead of a just message or note.
    so my question is how do i change the message style then?

    You only get that when you have two or more consecutive messages. Try to avoid that is one option.
    You can change the icon if you want. Create another icon, call it stop.ico and put it in the icons directory (as indicated by UI_ICON). However, if you have a STOP alert, the icon changes for that alert too.
    Note: this is for Developer 6i. In 9i you cannot use ico files. Use gif files instead and put the image in the image jar file (found in OH/forms90/java directory). Since you see a big X, I believe you are using 6i.

  • How can we change the message type?

    Hello all
    We use SRM server 5.5 with classic scenario.
    When we create shopping cart, we implemented the Change Badi to assign the purchasing group from R/3 material master.
    We implemented the following logic.
    If material master in R/3 has no purch. Group, SRM also has no purch. Group. So SRM display the error message “You should select the purch. group” to determine the purchasing group in basic view.
    But, We have the standard error message, when we choose the material code – this material code has no purch. Group in R/3 – “No purchasing groups were found”.
    Message number is BBP_ATTR050.
    Because of this message, we can not progress the process to create shopping cart.
    Can we change the message type from Error to Warning Message?
    Or, Can we delete this message?
    Thank you,
    Best regards,
    SH

    Yes. You are right.
    When user choose the material code, there is no purch. group in 1st Step, but
    we want to choose the purch. group in 2nd Step on basic view.
    But we have the error message at 1st step. so we can not progress to 2nd Step.
    If we use dummy purch. group, user could make the human mistake.
    So our customer want to remove purch. group and choose the purchasing group by user.
    But i'm not sure if we remove this error message, we got solve this problem..
    Pls give me an idea..
    Message was edited by:
            So Hee Lee

  • How can I change the label of iCloud mail in Mail?

    I have an iPhone, where the iCloud account in mail is shown as "Name @ iCloud". I've just been setting up a new iPad Air 2 and there in Mail the label shows just as "iCloud". How can I change that label? I've been digging around but haven't found a way.

    Most of us just use names for the folders which seems to work fine unless you're not alphabetically inclined.
    It really doesn't make much difference who else may want a feature like that, it still isn't going to magically appear. If you wish to submit it as a feature request you can do so here: Feedback.
    There aqre third-party programs that may provide a similar function although not colors: DockStar and Mail Badger.

  • How can i change validator Messages

    i am newbie in JSFl i just start now
    i am making a very simple login application
    here i do a validator on text field.
    validation message show me as form1:txtid: Validation Error: Value is required.i want to change these message like ID is required.how can i do this??

    thanks shakeel bahi.
    it is only work for required property. am i right?
    how i change message on length validator?
    for example minimum length is 2 and maximum is 10
    error message show as
    for minimum
    form1:txtID validation error minmum length 2for maximum
    form1:txtID validation error maximum length 10here i want to replace my messages like
    User Id length Should be between 2 to 10thanks again for your efforts

  • How can we change default port 8080 of application express

    Hi all,
    Does anyone know how to change default port 8080 in application express to run on only "80"? I have tried the following link, but when i am trying to run using 80, error is being thrown.
    http://www.mypi.ch/?p=33
    I have checked that no other thing is running on 80 port. I am using Windows Vista
    With Regards,
    Sunil Bhatia

    I am really a newbie in this application express field.
    I have installed oracle application express 3.2 over oracle 10G Database as per steps provided on forum. Can you let me know how can i find which webserver i am using? is there any query which i could run to find this out...thanks for ur help. Do reply soon
    With Regards,
    Sunil Bhatia

  • HT1677 How can I change default web-browser?

    Dear Apple
    I love my iPhone 4S and iPad. But I can't find how change default web browser on iOS? If this OS doesn't do it. Could you tell about it in future?

    You can indicate your interest in such a feature to Apple via their feedback pages:
    http://www.apple.com/feedback
    We're all just fellow users here.
    Regards.

  • How can I change default language in Solaris???

    I'm italian and I need to install Solaris in my language....How can I do???
    I don't try to install yet.
    Thanks

    In /etc/default/init
    LANG=fr_FR.ISO8859-1
    Regards,
    Daniel

  • How can you change default persmissions saving files

    Mac OS 10.5.8, intel based Mac Pro
    When I save a file it has the permissions RW RW R.  There is another 10.5.8 non-intel Mac Pro then when they save a file to the destop, it is RW R R.  How do you change the default saving permissions?  I want it always to be RW RW W.

    I found it!
    http://support.apple.com/kb/HT2202
    you need to create /etc/launchd-user.conf at noted in the URl above with umask 022 in it.
    BDAqua - Thanks for the reply.  After I created the file and logged out/ back in, I had to change the permissions on the folder also.

Maybe you are looking for