How can i change macbook pro a1278 keyboard ?

how can i change macbook pro a1278 keyboard ?

Yes. It will be very simple.
Power down your mac. Hold down the option key on startup.
You will see disk utility. Go in disk utility and click the erase button for your HDD data.
Then go into install OS X and install the operating system.
It will be a completely fresh install ready for selling.

Similar Messages

How can connect my macbook pro mid 2012 to my imac 21.5 inch mid 2010 ?? I want to use imac like a display for macbook.

How can connect my macbook pro mid 2012 to my imac 21.5 inch mid 2010 ?? I want to use imac like a display for macbook.

Target Display Mode: Frequently Asked Questions (FAQ)
with a mini display to mini display cable. Attach it to the Thunderbolt port on your MBP and to the mini display port on your iMac.
How do I enable TDM?
Make sure both computers are turned on and awake.
Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2.

How can I change an english/american keyboard to a danish one?

How can I change an english/american keyboard to a danish one on a Macbook Air?

Apple menu / System Preferences / Keyboard / Input sources.
Click + (bottom left) and in the pane that comes up, select Danish on the left, and click Add.
Of course that can only change what the keys actually input, not what is written on the keys. If you wish to change the physical look of the keys as well, get in touch with Apple and ask if they can replace the keyboard.

How can I connect MacBook Pro OSX 10.5.2 to G3 Lombard (bronze) OSX 10.1.5?

Can anybody please tell me in simple terms how to connect my MacBook Pro OS X 10.5.2 to my G3 Lombard (bronze keyboard) laptop OS X 10.1.5 so that I can share files. I wish to drag files from the old G3 computer's hard drive into the hard drive of the new MacBook Pro as well as search the old hard drive from the MacBook Pro. I have an ethernet crossover cable as well as regular ethernet cables. Can I connect the computers directly, or should I disconnect my Linksys router from the modem and connect the computers through the router via ethernet?
I have tried both ways, and failed. However, I think I need clear instructions in how to share under both OS X system versions, to set a file's permissions (in both OS X versions), how to set the firewalls (I have Norton Personal Firewall in the G3 and the OS X firewall in the MacBook Pro), how to see the hard drives of the other computer, and how to set anything else properly, as well as any detail that will make this easy to do properly.
Finally, I need to be able to return the settings of the MacBook Pro back to secure settings that will allow me to connect safely when I take it to work and connect to the ethernet network there. Thank you for your help.
Sincerely,
Wilson

connect the computers through the router via ethernet
Both these computers are capable of File Sharing using IP. Only Macs running 10.3.9 and earlier can use AppleTalk File Sharing. Rendezvous/bonjour can help you on the later 10.5 Mac, but may not be too helpful on the 10.1.5 Mac. So you may need the IP address of the 10.1.5 Mac to connect to it.
On the Mac to share its files:
System Preferences > Sharing > Services
check "Personal File Sharing" AND
System Preferences > Sharing > FireWall
check "Personal File Sharing" to let that traffic come through.
I expect it is similar for Norton FireWall, but Norton has such a \[well deserved] rotten reputation, and has pretty much pulled out of the Mac market, so help on this may be hard to come by.
On the \[10.5.2] Mac that wants to mount the Shared Volumes:
In the Finder, Go Menu, select "Connect to Server"
Select your 10.2.5 Mac in the window that opens and click connect. If it is not seen, you can browse for it or specify its IP address.
You get a login Window. Login using an ID \[from the 10.1.5 Mac] that has Permissions to read and write the files you want to share. The drive(s) or Folder(s) you specified will mount as network Drives on the desktop. Drag and drop files in both directions to your heart's content.
N.B.: If you choose "Guest", you will have access to the "Shared" folder ONLY.
You have made no changes or compromises to your 10.5.2 Mac, so no Undo is necessary to take it back to work on Monday.
Message was edited by: Grant Bennet-Alder

How can I have MacBook por Arabic keyboard?

Hi I'm Akeel from Arabic country, so how can i get MacBook Arabic keyboard from Malaysia

https://discussions.apple.com/thread/4052838?start=0&tstart=0
and
http://www.youtube.com/watch?v=eAbyRsnNI2Q

How can connect my Macbook Pro to a TV Monitor ?

How can i connect my MacBook Pro to a TV monitor other way than 15 pin cable ?

I would check out Monoprice. I bought this cable for my late 2011 MBP - it attaches to a Thunderbolt or Mini DisplayPort and then out to HDMI. It's just a small adapter - under $7 - and worked quite well for me. You'll have to get a HDMI cable of your desired length to work with it. I also suggest using Monoprice for HDMI cables - they've excellent quality and low prices.
Clinton

How can I Change the On Screen Keyboard Layout?

Hi everybody...
I've searched on the support and I didn't find anything on that.
I Don't know if it's something on the initial Start of my Palm TX, i don't remember!
Right now my on-screen keyboard have a AZERTY layout, the french on... I've setted the language in french, but I want to have the QWERTY layout like US and Canadian.
How can i do that??? with a hard reset to restart the initial setup??
BTW I don't mind if I must have my device en English, but I want a QWERTY keyboard!!! hehe
Thanks A LOT!!!!
Post relates to: Palm TX

Believe you will have to change to English to get qwerty. Alternatively, you might want to take a look at pruss' MyKbd, which you can rearrange to your heart's content.
Post relates to: Palm TX

How can i connect macbook pro with iphone 4 via bluetooth?

I`ve connected iphone with macbook pro few weeks ago for i-net surfing, but i had to use cable. Now i wanna try icloud, and i`ve faced that trouble. My mbp sees iphone, makes pair, but fails to connect it. If i try it with iphone, a message "mbp cant be connected, it isn`t connectible device"-something like this- appears and mbp disappears from known devices list. How can i solve that?
MacBookPro8,3 (17")-june 2011
Boot ROM: MBP81.0047.B1E
SMC: 1.70f3
Mac OS X 10.6.8 (10K549)
iphone 4 16 gb
model MC603ZA
ios 4.3.5 (8L1)
boot rom 04.10.01

I have somehow the same problem. I just bought the new iPhone 4S and tried to connect it to my MacBook Pro (OS X 10.6, latest version, model 2011). The Phone did not see the Mac but the Mac the Phone, so I connected the Phone via Mac.
It worked for about 5 seconds, but then I got this error message:
It's German and means that the network is not available.
Of course I tried again to connect, but I now get always this error:
It says that the device is not available...
I deleted the iPhone from the list under Mac and tried again, but it's still the same.
No my Questions to the community:
Why does the iPhone not see the MacBook?
Why does it allways disconnect?
Is Sync not possible via Bluetooth?
Thanks for your help!

How can I set macbook pro to reconnect to secure home wifi after lifting the lid (from sleep mode)

I have owned my MacBook Pro for 1 year now and not sure for how much longer! It is my first Mac so I have been patient as most issues are 'operator eror) but since I upgraded to Mountain Lion OS X 10.8.2, every time I close the lid then reopen from sleep, the WiFi does not auto reconnect.
I have trawled these forums for 6 month now and not found a solution. I have lost count of how many people have added to threrads saying they have the same issue bt I have not found a thread that resolves this issue for everyone. (or me)
Can someone point me in the direction of a final tried and tested 100% fix? Surely if the issue is so bad Apple have some 'patch'? Or is it a router security issue when reconnecting?
I would not reccommend buying Apple to anyone purely on this one issue. I would like to have my faith restored.

JohnTh,
Well, so far, success! I would never have got to that point on my own! I simply followed your procedure and it worked first time.
For info, the router I am using is a Netgear DGND33000v2.
I might go back and do it again, renaming my WiFi back to the original name (the one I used was temporary).
I will have to go round all my other devices and re-establish the WiFi links.
Apple TV
DVD player
iPad
iPhone etc.
As Paul4Laffs reiterates, this problem is viral on the www forums and yet, (touchwood) is simple to fix!?
I hope I don't come back after a few days (I have read some 'fix's have worked but for limited time.)
Maybe you have jut saved this MB from eBay!
Once again thank-you.

How can i reset macbook pro a1286

hi i forget my password on my macbook pro how can i reset it

jebsforu wrote:
i get mac os x 10.6 from my friend. i trying to restore mac os but when i press c after power on its stuck on apple logo nothing happen. but dis cd working on my friend macbook when i m pressing c .
Your friends 10.6 "gray disk" will not work on that machine.
You need this one.
http://store.apple.com/us/product/MC573Z/A

How can I recover MacBook Pro disk space

My MacBook Pro is over ten years old... works fine, but I can't access much of the disk space on the original hard drive. I should have 100 Gig of space but only about 5 gigs is available despite the fact that Appications show 13 Gigs used and oly 7 Gigs of folders/files are listed in the info panel. Do I need to erase everything and start over t access the remaiing 70+ gigs on the disk?

Where did my Disk Space go?
Slimming your hard drive
OmniDiskSweeper is a free utility that checks HD space.
FreeSpace cost $1 or is a free utility that checks HD space.
SpaceControl is a free utility that checks HD space.
Rule of thumb: You should never let your hard drive get to where you have only 10-15% of space left.

How can i get macbook pro to recognize my samsung fascinate to transfer music?

I want to transfer the music already on my samsung fascinate phone onto my new macbook pro using the usb mass storage device option. when i plug the phone into the usb port the computer recognizes that its there, but i am unable to do anything with it. shouldnt i be able to open the files on the phone and transfer them to the computer? any help would be great so i can get my music back

Contact Samsung's tech support and/or read its user manual.

How can I get MacBook Pro trackpad to recognize 4 finger tap as app switcher?

On my Bluetooth trackpad I have it configured so that a 4 finger tap is the app switcher.
I want to configure the trackpad on my new macBook Pro to do the same, so that when I am away from my desk and using only the laptop I can have a 4 finger tap be the gateway to an app switcher.
Do I need to download some new capabilities to enable this 4 finger tap?
The MBP trackpad does not seem to accept any 4 finger tap commands.
Steve

http://magicprefs.com/faq.html

How can I order macbook pro systems disk?

I recently tried to make a 'clone' of my iMac with my MacBook Pro. I used 'Migration Assistant' with a firewire connection. Now my macbook doesn't want to start-up. It freezes with a blue screen.
After a little research I have decided that it would be best if I just started new with the macbook, then try the 'cloning' again. The snag comes where to start with a new macbook, I would need to re-install the OS, but cannot as I do not have the systems disk for my macbook. I did try it with the systems disk for my iMac, but this did not work.
I would like to order the systems disk for my MacBook as I am in France. Does naybody know if I can do this online and if so where?!?

You need to call AppleCare.

How can i connect macbook pro to time capsule via ethernet

I just purchased a Time Capsule to backup my MacBook Pro. I tried to back up the files via wifi but it was taking forever. I tried connecting the Time Capsule to the MacBook via an ethernet cable but it won't recognize it. Any suggestions?

When you plug in by ethernet, make sure you plug into a LAN port on the TC... ie one marked.. <...>
Make sure the connectivity led goes on.. tiny light on the port itself.
On the MBP turn off wireless.
Make sure ethernet is set to auto .. check its status in network preferences.
Finally press and hold the reset button for 10sec to reset the TC.. that usually brings them back to life if it is acting up.
What OS on the MBP?? Lion and ML have issues finding the TC.

How can i change macbook pro a1278 keyboard ?

Similar Messages

Maybe you are looking for