How can I change network port configuration default setting?

Hello,
I am having trouble connecting to the internet. When I try to connect, it dials, rings, and then has a long tone, then disconnects. Preferences>Network>Assist Me>Diagnostics>Location>Network Port has Built in Ethernet chosen. I unchoose it, choose Internal Modem. It goes on to try to connect, than asks me if I have DSL or Cable (I don't) I choose no, asks me if there is anything else to restart, no, I choose. It then says to check configuration. I go back till the location page then continue, continue, then it connects. It won't stay selected to Internal Modem. I have checked its box and dragged it to the top (and unchecked and dragged Ethernet to the bottom). This happens 90% of the time but not always. I can connect to the internet, but have to go through this. I don't have Built in Ethernet.
Thanks,
Maria

Open Network preferences. Select Internal Modem from the list and click on the Configure button. Click on the PPP tab. Fill in the required information for your dial up ISP including your username and password (for your dial up account.) Check the box to save your password. Click on the Apply button. Click on the TCP/IP tab and select DHCP from the Configure IPv4 drop down menu, click on the Apply button. Click on the Modem tab and select the modem from the drop down menu that corresponds to the one you are using or have installed internally in your computer. Click on the Apply button. Quit Network preferences. This should have you all set. Use Internet Connect to initiate the dial up.
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Similar Messages

  • How can I change the port of a running database ?

    Hi Friends,
    on my laptop there is running a 9i DB with port 1521 and a 10gR2 DB with port 1521 also.
    The tnsping on these db's is successfully and
    with any tools I get the error : ORA-12505 .
    How can I change a port number e.g. of the 10g DB ?
    Thanks,
    Friedhold

    These tools you are talking about, did you configure the tnsnames for them?
    If you plan to change the default listening port, you need to modify the listener.ora file under $ORACLE_HOME/network/admin
    After 9i, Oracle has service registration
    A feature by which the PMON process automatically registers information with a listener. Because this information is registered with the listener, the listener.ora file does not need to be configured with this static information.
    You can try to run one listener, see if both instances can register themselves in even they are different versions.

  • How can I change HTTP port in J2EE

    Hi.
    I installed Sneak Preview 640 and I want to change HTTP port for J2EE. (default port is 50000)
    So, I started config tools and move to dispatcher -> service -> http -> port.
    There is port information.
    - Custom value : empty
    - Default value : (Port:80,SocketQueue:200,AcceptingThreadsCount:10,BindAddress:,Type:http)(Port:443,SocketQueue:200,AcceptingThreadsCount:10,BindAddress:,Type:ssl)
    My first question is that default port is "80" in above confirguration. Why we use "50000" ?
    Second question is that I changed custom value but It doesn't work. How can I change HTTP port ?
    Regards, Arnold.

    you can use the "visual administrator" to set your http-port, too:
    Dispatcher / Services / HTTP Provider / Ports
    kr, achim

  • How to recover from network port configuration deletion (airport)

    a couple of years ago, i accidently deleted the network port configuration for AirPort in the Show pop-up menu. No big deal, i thought at the time. I don't have an AirPort card and I won't be using AirPort in this computer. Ok, I now have an old-style AirPort card (powerbook G3 firewire, 10.2.8) and the AirPort utility doesn't see that it's installed. I realized right away, the network doesn't have a port... so the system doesn't see it, right? So, how do I get this port back? Do I have to reload a new System entirely and not save previous network settings... or is there an easier way to recover from my blunder?

    Thanks Rob,
    Glad to be here. Yeah, 10.2 works the same as 10.4. The problem with what you suggest is that I can no longer get airport as an option in Network port configs... so when I go to the new button all the other options are there EXCEPT AirPort. This is what I need to restore. I haven't checked, but I'm assuming I've nuked the pref panel out of the master library. So, I've messed up big time. I was looking for a way to recover that didn't involve reloading the whole system. This isn't like OS 9 and older where you can go and pick a little piece and stick it back into your system folder... I think. Thanks for the reply.

  • How Can I Change the Ports for WebDAV file shares.

    Title says it all. I have another piece of software using port 80 and 443, I'd like to create iOS shares using WebDAV but I can't find anywhere in the GUI to change the port numbers and I can't work out whether I need to do something involving Apache virtual hosts and if so which config files are relevant to the WebDAV server.
    Someone must have done this by now, anyone know how its done???!!!!
    Thanks in advance.

    OK, so I worked out which files to edit and I actually managed to change the Apache/WebDAV ports on a clean 10.8 Server.
    By clean I mean I installed 10.8.0, updated to 10.8.3 via the combo updater, then installed the latest version of Server app and configured the services.
    Having done that I was able to make the required changes and all is working well. I then replicated the process on my live server but it throws up an error when I try to start up the WebDAV sharing.
    This thread outlines the same issue:
    https://discussions.apple.com/thread/4199421?start=0&tstart=0
    I am getting this exact problem, in that any manual change at all to the 0000_any_443_.conf file will cause WebDAV to fail to start. This is annoying because I need to change that file. Its also annoying because the problem isnt there on my 'clean' server.
    I deleted the entire /Library/Server/ folder and the Server.app and reinstalled Server.app from the App Store, recreating the /Library/Server folder from scratch. This cleared out the apache config files which I tried to re-modify, but all the file sharing settings were retained. Does anyone think it would be worth deleting all the sharepoints? Any other ideas?

  • How can I change the "port" the printer uses?

    I want to access a Canon LBP3000 printer set as shared on a Windows PC. The Canon driver download does not allow me to find the driver when I try to add it to the shared printer.
    However, if I plug the Canon in directly to the Macbook I can install the driver.
    Is there a way I can change this "local" printer to point to the Windows PC printer?
    In Windows, I would just change the "port" from "USB001" to "\\Windows\Canon".

    dougham wrote:
    Having connected the printer to the macbook, and added the printer, how can I now tell the macbook that the printer is not attached to a USB port, but is found at \\<windowspc>\<printersharename>? It is a simple problem on a Windows PC to change the port of a printer. Surely it is also possible on a macbook.
    It is possible on a Mac but this is not your problem. What Canon told you is wrong. Your problem is not with the Mac but with the Canon driver. The Canon CAPT driver for the LBP-3000 has not been designed to be used when shared from a Windows computer. It expects a direct USB connection to the Mac. The same applies to another proprietary driver called UFR2 for Mac. So no amount of queue changing will resolve your issue.
    For the record, to connect to the PC share via Mac, you would normally select to add and then select the Windows icon. This lets you browse the local network, starting at the workgroup level. After selecting the workgroup, then computer, then share name, the URL will look like \\computernamesharename.
    In a situation where you need to manually add the address because you cannot browse the network, you can modify the Add Printer toolbar to add the Advanced icon. This is done by Control-clicking on the Add Printer toolbar, selecting Customize Toolbar and dragging the Advanced icon to the toolbar. Then when you click the Advanced icon, a pane appears that lets you select a number of different protocol options, one of which is Windows. Here, in the URL field, after the "smb://" you can enter the computer share name followed by the share name, for example smb://windoze7/myprinter (don't be too concerned that the slashes are the opposite direction).
    Pahu

  • Can't Delete Network Port Configurations

    In the "Network" preference in System Preferences I have found a few new Port Configurations that should not be there. When I go to delete them the application just asks me to confirm (which I do) and then does nothing, they are still there. The Port Configurations are titled "BlueetoothDUN" (I also have a normal "Bluetooth" Port Configuration which I do not want to delete), "Ethernet Adaptor (en2)", and "Ethernet Adaptor (en3)" (I also have one called Built-in Ethernet which I do not want to remove). How do I remove these useless Port Configurations?
    Thanks in Advance
    2 Ghtz Core Duo Macbook   Mac OS X (10.4.8)   1 GB DDR1 SDRAM

    Oops, should've been...
    /Users/nnnn/Library/Preferences/com.apple.internetconnect.plist
    Where nnnn is the user's name. :-O
    Hmmm, when you tried to delete them before, where you logged in as an Admin user?
    I'm thinking these might be System settings instead of User settings.
    Wolfdude96, Not sure this will help, but try trashing...
    /Users/nnnn/Library/Preferences... the whole Prefs folder there.
    /Library/Preferences/SystemConfiguration... the whole SysConfig folder.
    /Library/Preferences/com.apple.sharing.firewall.plist
    /Library/Preferences/com.apple.AppleFileServer.plist
    Reboot... of course you dont have to trash them, you can just move them to the desktop to drag back if it doesn't work.

  • How can i change or add new default optiom in su01 tab

    Dear Experts ,
    here oe End user Required some Requirments in SU01 -> Default tab
    su01 --> Default tab -->Decimal Notation having different styles (1,234,567,89)
    but my END user wants like 12,34,56,789 this format
    how can we get this type ...is it possible to change decimal notation format
    Regards

    Hi,
    Check below thread which is related to your problem:
    How to convert decimal notation to comma notation
    Thanks
    Sunny

  • How can I  change the port number generated in the returned url?

    We have a hardware load balancer listening on port 80 and forwarding requests to weblogic 6.1 sp2 servers on port 8090. The web servers generate urls containing the port number (and ip address of the load balancer). The browser tries to acces the load balancer at port 8090 and fails. So, how can I tell weblogic not to put a port number in the url?
    TIA, Reinier

    Generated WSDL will use the URL of the incoming
    HTTP GET request (request to retrieve wsdl) to create:
    service->port->location->address
    attribute inside the WSDL.
    This attribute is used by the client to send the SOAP
    request.
    So the HTTP GET request to retrieve the WSDL
    should use the address of the load balancer (ie 80).
    Then the generated WSDL will also have a url with
    port 80.
    http://manojc.com
    "reinier" <[email protected]> wrote in message
    news:3ea95116$[email protected]..
    We have a hardware load balancer listening on port 80 and forwardingrequests to weblogic 6.1 sp2 servers on port 8090. The web servers generate
    urls containing the port number (and ip address of the load balancer). The
    browser tries to acces the load balancer at port 8090 and fails. So, how can
    I tell weblogic not to put a port number in the url?
    TIA, Reinier

  • How can I change the logo of default application server

    I am in 10g environment. Whenever I open my application in browser I see a splash screen "Oracle Application Server Form Services ...".
    Can I change this splash screen with the my own.
    I tried the following but it just removed the default one
    # Forms applet parameter
    splashScreen=D:\dev10g\my_splash.gif
    # Forms applet parameter
    background=
    # Forms applet parameter
    lookAndFeel=Oracle
    Message was edited by:
    Aasem

    Yes, you can.
    The GIF file must be under a directory where Oracle can read, like the %ORACLE_HOME%/Java directory. And you only specify the file name, not the full path.
    # Forms applet parameter
    splashScreen=my_splash.gif
    # Forms applet parameter
    background=
    # Forms applet parameter
    lookAndFeel=OracleTony

  • How can I opt out on the default setting for a split window in Firefox 3.6.12 ?

    Since I upgraded to Firefox 3.6.12, the page opens up with two vertically divided panes. Each pane displays a different bookmark. The left pane is generally only about an inch wide and can only be expanded to about 3 inches wide. In that mode, it is pretty much useless and only provides a distraction. How can I opt out on what appears to be the default setting for a split window with two vertical panes.
    At this point, I am discontinuing using Firefox in favor of Safari because of this change in the default window.

    Opening in the side bar is the default for bookmarks that are created via a link or button on a website.
    You can check the Properties of a bookmark via the right-click context menu in the side bar (Ctrl+B; Cmd+B on Mac).
    In the Bookmarks Manager (Bookmarks > Organize Bookmarks) you can click the More button in the Details pane at the bottom right.
    Make sure that "Load this bookmark in the side bar" is not selected.

  • Can you change still clip duration default setting?

    I create wedding videos, and at the end of my movie I add about 100 still clips as edited highlights. In older versions of imovie you were able to alter the length of still clips created in the preferences to whatever time you wanted. In this newer (better?!?) version when I have created all my still clips I have to click on each one individually to alter the time duration. The default setting is 5 seconds and I can't find anywhere that you can change this. It takes me AGES to do this individually, anybody got any ideas of a better way? Cheers.

    I can't necessarily recommend this for it can lead to project corruption. It's possible to manually edit the text of the iMovie project file, changing the playtime duration of all your still clips to the duration you want.
    1. In iMovie, double-click on one of your still clips. Write down the name of its source file. Quit iMovie 6.
    2. In the Finder, make a duplicate of the project. Work on the duplicate.
    3. In the Finder, open the duplicate project package. (Control-click on the project icon and choose "Show Package Contents" from the popUp menu.)
    4. You'll see two iMovie project files loose in the window that opens, plus some folders. One of the project files has a tilde (~) in its name and one does not. Our goal is to edit the file that does NOT have the tilde. (The tilde file is type of backup.)
    5. Launch TextEdit. (In your Applications folder.) Drop the non-tilde project file onto the TextEdit icon in the Dock.
    6. Use TextEdit's search function to search for the string that defines the play-time of each still clip, now 5 seconds. For PAL, that string is "<integer>125</integer>". For NTSC, it is "<integer>150</integer>".)
    7. For each still, you want to change the 125 to some other number. For PAL, the number you want is 25 X the number of seconds to play.
    If the only clips in your project that play for 125 are your stills, you can safely use the Replace All command to replace all with the strings at the same time. Be sure to include the tags <integer> and </integer.
    If there are others that play for 5 seconds, you'll need to examine each clip individually, using the sample name you wrote down to see if the clip uses a similar name.
    8. Save the modified file and close that TextEdit window.
    9. Go back to the Finder and double-click on the project package to open it in iMovie 6. If everything worked as intended, all your stills should play with a new length.
    Karl

  • The email address I originally set iCloud with  no longer exists. How can I change this email address in setting?

    how do I change the email address that I originally set iCloud up with? The email address no longer exists.

    Hi, rexfromarmidale.  
    Thank you for visiting Apple Support Communities. 
    I understand that you are wanting to change the primary email address associated with your iCloud/Apple ID.  Here is the article that will walk you through this process. 
    Change your Apple ID
    http://support.apple.com/HT202667
    Cheers,
    Jason H.

  • How can I change the port for Adobe Media Player?

    After instaling Adobe Media Player I lost my IIS. AMP has hijacked my port 80. Now how could I alter configuration so that AMP will use a different port.
    I have many programs configured for Port 80 and I dont want to go and change all of the hardcoded ports in Javascript and CSS files.
    http://hodentek.blogspot.com/2009/04/adobe-media-player-internet-information.html
    http://hodentek.blogspot.com/2009/04/adobe-media-player-and-iis-part-2.html

    These tools you are talking about, did you configure the tnsnames for them?
    If you plan to change the default listening port, you need to modify the listener.ora file under $ORACLE_HOME/network/admin
    After 9i, Oracle has service registration
    A feature by which the PMON process automatically registers information with a listener. Because this information is registered with the listener, the listener.ora file does not need to be configured with this static information.
    You can try to run one listener, see if both instances can register themselves in even they are different versions.

  • How can I change my VPN configuration so that not everything goes through it?

    So I generally connect my laptop through my WiFi connection, which is set as priority number 1. For connecting to certain servers at my office (I work remote) I need to VPN in. Now, I'd like to be able to stay connected to VPN without ALL my internet data going through it. My understanding of the network priority list was that it would attempt the higher connection and then go lower. But I have WiFi at the top of my list and VPN at the bottom, yet everything is going through the VPN. I know this because I did a traceroute and every URL I hit is going through my work servers. I disconnect VPN and try again, they go through the comcast DNS server.
    So my previous understanding of the priority list was that it would try through the highest priority, and then only if that didn't work it through go through lower priorities in order. Is that wrong? Is there actually a way I can get it to do what I want? Thanks.

    With VPN software installed on your Mac all connections to the net will go through that VPN. you have to shut the VPN down for your normal traffic to go directly out to the net. That is just how it works.
    Let me add that is the point of a VPN. So everything done on the computer goes through a Virtual Private Network to your workplace. Otherwise your computer could expose the work network to malware you might get from the Net on your computer.

Maybe you are looking for