How can I change the base station my airport express connects to?

I just added a new AirportExpress to my wireless network and am using it to extend the range of the network and for AirPlay. When setting it up I selected the main base station that provides the wireless network when asked to select a device for it to connect to. However, now when I view it in Airport Utility, it's the only device on the network that has only Good signal strength rather than Excellent. There is another AirportExpress conencted which has Excellent signal strength that is the closest access point to this new AirportExpress.
How can I change the setup using Airport Utility so that that's the device that it's using to connect to the network?

With a Mac using the Airport Utility.
With a PC using the Airport Utility you can install on your PC with the install disc included.

Similar Messages

How can I change the country in my Airport Extreme wireless settings

I bought my Airport Extreme in the US. I live in the UK.
How can I change the wireless settings to show the UK (or Europe) as one of the available countries? At the moment it lists only countries in the Americas (Canada, US, Argentina etc...)

Others may know better!
Regards,
Shawn
This is exactly correct.. You can set the Time Zone to anywhere in the world but the wireless is regionalised.. it is part of the sales approach that you should buy the product in the market where it will be used.. the following are the regions.
From the md0a file.
FCC JAPAN ETSI APAC ROW FCC-DFS KOREA RUSSIA
You cannot alter this nor do Apple offer this service.. although I am pretty sure they will have a backdoor.
I have altered it for interest sake by soldering in a console port.. stop the bootloader and the following commands.
K30A>var
apple-sku=ETSI
apple-sn=6F94sxxssxxss
ethaddr=00:2xxxssxxb
K30A>
K30A>setvar apple-sku=APAC
K30A>
K30A>var
apple-sku=APAC
apple-sn=6F94sssxxxx
ethaddr=00:2sxxxssxxss
If you want the pin out to the serial port.. well I can even give you those. At least for a TC.. I am not in any way recommending this.. just showing you where it is hidden.
And this so far would only work on a Gen 4 or Gen 5 AE.. I haven't figured it out on Gen 1-3 nor of course am I about to try soldering in wireless to a Gen6 AE or Gen5 TC.. doubtless it will come to that at some point.

How can I change the radio stations?

Hi
I want to eliminate all the radio stations that come with iTunes by default. The cause is that all the stations are americans and they dont have any interest for me.
Insteaf of this list of radio stations I want to put a list of european radio stations. Is it possible?
Thanks
JP

vatpc wrote:
Hi
I want to eliminate all the radio stations that come with iTunes by default.
You cannot eliminate them.
You can turn off the radio in iTunes prefs > General.
Insteaf of this list of radio stations I want to put a list of european radio stations. Is it possible?
There are many applications for interent radio stations.
Also, if the station website has a link to listen, you can add it to iTunes and put it into a playlist.
See this -> http://www.macobserver.com/tmo/article/Adding_Internet_Radio_Station_to_iTunes/

Hi!!!How can I change the options in a VI express?

I want to scale a signal, and I am using the vi express "Scaling and Mapping". But!!!!I want to control the differents "options" that I can choose, linear scale, slope...How can I do it? I don´t know if it is possible in a vi Express. I know that I can change the properties of controls and indicators using properties nodes, but I thing that it doesn´t work in this case, but I am not sure!!!!
Thank you!!!
Graci

First thing to do is to convert the express VI to a standard subVI by right clicking on it and selecting Open Front Panel. Then, select which front panel controls that you want and add them to the connector pane.

How can I check the version of my Airport Express and TimeCapsule machines ?

I want to look up the technical specifications of the routers in my wifi network (1 TimeCapsule and 3 Airport Expresses), such as maximum bandwidth etc. (my provider just increased maximum download speed but I am not seeing that difference on my machine). How can I find out the version number of those items in Airport Utility ?

Open AirPort Utility
Hold down the option key on your Mac while you double-click on the picture of the Time Capsule
The model and version will be displayed
Follow the same procedure for the Express devices
Post back on your results
Note that the Ethernet port on the AirPort Express will only support up to a 100 Mbps connection, so if the Expresses are connecting using Ethernet, 100 Mbps would be maximum speed that they could attain.

How can I change the disabled of a message text input base on a choice

how can I change the disabled of a message text input when a dropdown list value is changed? I declare the primaryclientaction but I don't know how to make the event automatically change the disabled of the message text input to true or false.
HELP!!!! IT'S URGENT....

Hi,
assuming you are using ADF Faces:
Put a submit(); in the on-change javascript event of the dropdown.
In the disabled property of the input text use some EL to reference the value of the dropdown eg disabled="{#{! bindings.Fruit.inputValue == 'BANANA'}"
Brenden

How can we change the purchasing group which it is maintained in R/3?

Hello All.
In case of MM, purchasing group is assigned to material master.
It means purchasing group is maintained based on material code.
But SRM has different maintenance level.
As you know that purchasing group has the responsibility based on material group (Product category).
So we should change the purchasing group from R/3, when end user create shopping cart.
How can we change the purchasing group which it is maintained in material master?
Thank you,
Best regards,
SH.

Hello So Hee,
I am not a technical guy.
But for your requirement i am building a logic.
I am not sure whether it will work.
You need to check with your ABAPER.
It is as below:
When the SC is approved and the other configuration is correct ,
PR is created in ECC by the virtue of BAPI.
You want that the pur grp should be populated on the base of matl code and not on matl grp.
Hence in SC you will not fill up pur grp.
In the programme for BBPSC01 i.e. SC creation you will add modification that it will call a custom FM.
This custom FM will get the matl code from SC and will find the value of pur grp from R/3 MM01i.e. matl master(you may get in MARA).
Now in the BAPI you need to incorporate this additional value of yr pur grp field.
So the desired pur grp as per yr R/3 matl master will be populated in yr R/3 PR.
Again: this is all hypothesis.
That's all I can help you.
BR
Dinesh
<b>Reward if helps</b>

How can I change the password for the USER in SAP.

How can I change the password for the USER in SAP?
also I want to change the Language and date Format b/c it's displaying in German language..

Hi,
Assuming that User has already his/her user-id and password, and now he/ she wants to change it.
select the client and provide Log-in credentials. Now, instead of 'ENTER' there is one Tab: 'New Password' (up, left hand). Click it.
Now, system will ask for new password to change.
If you are asking from Basis point of view, then T.code: SU01 - User Maintenance.
Enter User's id and Click Change icon.
It will lead to Page: Maintain User.
Here, Select tab: Logon Data
There is a Sub-Tab: Password.
Here, key-in change password and SAVE.
For Language and Date format, contact your Basis-Personnel.
Best regards,
Amit

How can I change the frame rate mode?

Adobe Premiere Pro exports my videos with a variable frame rate. Because of this long videos are asynchronous. How can i change the frame rate mode? So Adobe Premie Pro exports my videos with a CONSTANT frame rate? The original video has a constant frame rate...

Sorry my mistakes. I am from Germany.. so...I mean with asynchronous that the video file and the sound file are displaced. In the beginning of the Video it's normal, but if the videos is very long it goes VERY "asynchronous"
I analyzed the video with "mediainfo":
General
Format                                   : MPEG-4
Format profile                           : Base Media / Version 2
Codec ID                                 : mp42
File size                                : 2.00 GiB
Duration                                 : 20mn 13s
Overall bit rate mode                    : Variable
Overall bit rate                         : 14.2 Mbps
Encoded date                             : UTC 2013-12-11 13:56:13
Tagged date                              : UTC 2013-12-11 13:58:30
©TIM                                     : 00:00:00:00
©TSC                                     : 30
©TSZ                                     : 1
Video
ID                                       : 1
Format                                   : AVC
Format/Info                              : Advanced Video Codec
Format profile                           : [email protected]
Format settings, CABAC                   : Yes
Format settings, ReFrames                : 3 frames
Format settings, GOP                     : M=3, N=30
Codec ID                                 : avc1
Codec ID/Info                            : Advanced Video Coding
Duration                                 : 20mn 13s
Source duration                          : 20mn 13s
Bit rate                                 : 14.0 Mbps
Width                                    : 2 560 pixels
Height                                   : 1 440 pixels
Display aspect ratio                     : 16:9
Frame rate mode                          : Variable
Frame rate                               : 30.000 fps
Minimum frame rate                       : 30.000 fps
Maximum frame rate                       : 30.030 fps
Standard                                 : PAL
Color space                              : YUV
Chroma subsampling                       : 4:2:0
Bit depth                                : 8 bits
Scan type                                : Progressive
Bits/(Pixel*Frame)                       : 0.127
Stream size                              : 1.98 GiB (99%)
Source stream size                       : 1.98 GiB (99%)
Language                                 : English
Encoded date                             : UTC 2013-12-11 13:56:13
Tagged date                              : UTC 2013-12-11 13:56:13
Color primaries                          : BT.709
Transfer characteristics                 : BT.709
Matrix coefficients                      : BT.709
mdhd_Duration                            : 1213733
Audio
ID                                       : 2
Format                                   : AAC
Format/Info                              : Advanced Audio Codec
Format profile                           : LC
Codec ID                                 : 40
Duration                                 : 20mn 13s
Source duration                          : 20mn 13s
Bit rate mode                            : Variable
Bit rate                                 : 158 Kbps
Maximum bit rate                         : 254 Kbps
Channel(s)                               : 2 channels
Channel positions                        : Front: L R
Sampling rate                            : 44.1 KHz
Compression mode                         : Lossy
Stream size                              : 22.8 MiB (1%)
Source stream size                       : 22.8 MiB (1%)
Language                                 : English
Encoded date                             : UTC 2013-12-11 13:56:13
Tagged date                              : UTC 2013-12-11 13:56:13
mdhd_Duration                            : 1213777
And there i can read that the "frame rate mode" is variable... and that's the bad thing... I want to change that point to a constant frame rate mode. I use the H.264 codec

How do I change the base color in the recolor Artwork settings?

How do I change the base color in the recolor Artwork settings? I know this seems like a silly thing but I really need to figure this out and I have read and gone through the manual and the help forum to no avail. Please help.

If I have understood you correctly, you want to exclude a certain color from getting affected. You can click on a color row and it becomes highlighted with a border around it - in your artwork, let's say you want the orange color not to get affected. Right-click on it and choose 'Exclude Colors'. When you do that, you will see that the orange color moves to the bottom of the list and there is no arrow in front of it. Like this:

How can i change the path for uploadin videos??

i m using javax.servlet.servletcontext for setting the path for storin upload videos...
by using the getrealpath able to store videos in web-inf file...
how can i change the location...

this is the part of code in which i want to change my storage location:
** * The base path corresponds to the base directory of the
* application context's WEB-INF directory. This means that
* this directory is NOT visible to the end user.
public static String getBasePath(javax.servlet.ServletContext context)
{ return context.getRealPath("/") + "WEB-INF" + directorySep;}
/** * The temporary directory used to store files while they are
* being uploaded. */
public static String getTempPath(javax.servlet.ServletContext context)
{ return getBasePath(context); }
/** * Gets the upload directory - used to indicate the local file
* system storage area.
can u tell me now how to change the context value???
and how to change the storage loction??

How can I change the default templates to from A4 to Letter US?

Hi,
I live in Québec, the french part of Canada. Because I use French, iWork think I leave in France, so the default templates are in A4.
How can I change the default templates to from A4 to Letter US? It seem's impossible. In Pages 06, each language folder had templates. But with Pages 08, it's different.
Please help.

Autre façon : Ouvre un nouveau document. Il va être en A4. Dans le menu Fichier--->Format d'impression. Une fenêtre apparaît. Dans la ligne... Taille du papier, tu choisis... Lettre US; tu fais OK. Ensuite tu sauves ce document comme modèle. Menu Fichier----> Enregistrer comme modèle et tu lui donnes le nom, par exemple... USLettre.
Ensuite, va dans le menu Pages, va dans préférences et dans la fenêtre qui s'ouvre - Préférences générales - tu choisis : Utiliser le modèle... et tu cliques sur Choisir... à droite un peu en bas de Utiliser le.... et là, dans la fenêtre qui va apparaître, tu trouves le modèle que tu viens de faire...USLettre.
Voilà. Chaque fois que tu vas ouvrir Pages, ce sera USLettre qui sera là par défaut.
J'espère que ça va te satisfaire.
Évidemment l'idéal serait de pouvoir changer la template Vierge par une template Vierge US... mais j'ai pas encore réussi.
Message was edited by: BenwaR

:-) How can we change the default file path for Bank file ( dmee ) ?

Hi All,
We encounter a problem.
Electronic bank file ( created after a F110 run ) are created, in an automatic way to the DIR_TEMP directory. ( On the SAP server )
How can we change the default file path for Bank files ( dmee ) ?
We'd like to specify another path.
Thx for your help.
Erwan

Hello,
Make sure that you have created the directory in transaction code AL11 with the help of basis consultants.
You can link your PC directory to the application server.
You can maintain the path whether your file needs to get saved in OBPM4 against your DMEE structure example GB_BACS etc.
If you do not maintain any path in OBPM4, then the file gets saved to temporary directory. If you give the directory path name in OBPM4, then the file gets saved to that directory with numbers 0001, 0002, 0003 etc till it reaches 9999 and reset from the beginning.
If you give the path as well as file name as ABCD, then the file gets generated to that directory folder with ABCD0001, ABCD0002, ABCD0003 etc. till it reaches ABCD9999 and reset from the beginning.
Hope this solves your problem.
Regards,
Ravi

How can i change the default sort Arrow Color in the datagrid?

How can i change the default Sort Arrow Color in the
datagrid? i didnt found any style properties to change the sort
arrow color, i know it can be do it in flex 1.5 but how to do it in
flex2?

Type about:config in the address bar. Find browser.download.dir and change it to the path you want. Remember that Android has a linux base so the path will similar to /mnt/sdcard/downloads/

How can I change the display of Inbox in my iPad's mail app- so that it takes up the full screen?

How can I change the display of Inbox in my iPad's mail app- so that it takes up the whole screen, as opposed to just about one third; the other two thirds display the full text of the selected email?

You can't change the display in the Mail app, if you are holding the iPad in landscape orientation then the left-hand third will be for navigation, and the right-hand two-thirds will be an email. If you hold the iPad in portrait orientation then the navigation section becomes a drop-down section.

How can I change the base station my airport express connects to?

Similar Messages

Maybe you are looking for