How can I change the default for reading a pdf?

I accidentally set it to "notepad" so a bunch of code comes up instead of the pdf. How can I change the default? I'm using Firefox ESR 17.0.10. Thanks.

Hello,
# 1. go to the file that you want to fix
# 2. right click it
# 3. open with..
# 4. choose default then Adobe reader

Similar Messages

  • How can I change the default for interlacing on FCEHD 4?

    For some reason, when I import video into a project it puts interlacing on it.
    Where is the default and how can I change it so that it is NOT interlaced when I import it?
    This is quicktime video 720x480 standard that was not interlaced before the import.
    I tried putting a de-interlacing filter on it and it was way too soft.  I played around with all the other choices ie: all the flicker filters, upper odd and lower even and did not get satisfying results.  It was also very frustrating because I had to put the filter on every shot.

    Here is the source video:  It is 640x480  I do not see any lines.  If there is interlacing it is not very visible.
    Here is what it looks like in FCEHD4:  The project is 720x480  I do not see any interlacing at all in the canvas or viewer.
    This is how I exported it: (I checked "de-interlace source video")
    Here is
    This is the final outcome, but unfortunately on this screen, you can't see the lines.
    There is a very distinct difference between the source video and the exported video.
    The exported video is full of lines and looks like it's interlaced.

  • How can I change the colours for read/unread emails on a Samsung S6?

    The only difference between the colours for read and unread emails on a Samsung S6 is a very pale grey versus white background.  Is it possible to change these colours, or font colours, so that the difference between the read and unread emails is more obvious?

    Hm, I belive it has nothing to do with phone, most likely it's the email application that handles settings. You need to fire your email application and check the settings. Unfortunately at least in GMail app there is no way to change the theme, you might want to look for other email clients that offer customisable themes or simply more themes to select from.  Appologies that I don't have any recommndations to make 

  • How can i change the default mail reader to gmail?

    When i select an email address from the web, the default apple mail program mail (3.6) comes up.  I want it to always be gmail that comes up....but I don't have the option to set the default to that application.  Any suggestions?

    Install the Google Notifier and set it as the default.
    (58231)

  • Hi,how can i change the default settings on my adobe readerX1 such that it will display all my pdf files according to their individual cover pages (as cover picture thumbnails)before i click them to open and read........i really enjoyed this feature as a

    hi,how can i change the default settings on my adobe readerX1 such that it will display all my pdf files according to their individual cover pages (as cover picture thumbnails)before i click them to open and read........i really enjoyed this feature as a default settings upon installation in previous editions of adobe reader .i use a windows 8 pc now.thank

    For sideloaded content the nook pulls the metadata from ePub file itself.  I would suggest looking at a program like Sigil or Calibre that will let you edit the metadata in the book to make it appear like you want.
    For the PDF vs ePub - No, that's the way PDFs work (think of them as graphics, not text), wheres ePubs are Web Pages - so  no you can't them to behave exactly alike without converting the files.

  • How can I change the default application for a content type?

    Running a version of Linux, the default application for PDF files is "Use Document Viewer (default)", which appears to be /usr/bin/evince. I'd much prefer to use /usr/bin/okular; how can I change the default. This question is NOT about how to change the function that is automatically applied when I access a link, in this case "Preview in Firefox", but rather to the default application that I can select when I download a file being viewed in Firefox's previewer.

    This is real progress, a solution to the problem as posted. The command:
    xdg-mime default okularApplication_pdf.desktop application/pdf
    makes okular the default.
    However when I added okular to the choices for applications in:
    * Edit>Preferences>Applications>PDF
    the popup box that appears when I click Download on the preview page changed. The pulldown menu that appears next to "Open with" used to have 3 entries:
    # Document Viewer (default)
    # Acroread
    # Other
    Now it has only 2:
    # Okular (Default)
    # Other
    I'd like it to read
    # Okular (Default)
    # Acroread
    # Other
    How can I control the entries in this pulldown list?
    Also, how can I make the default choice in the popup box be
    * Open With <whatever> , rather than
    * Save File ?

  • How can i change the default application to vlc player for playing any videos on my macbook?

    How can i change the default application to vlc player for playing any videos on my macbook?

    1. Control click the file you want to open.
    2. Click Get Info.
    3. Under open with, pick the App you want to be default.
    4. Click Change All Button.
    5. Confirm your decision.
    You have to do this with every file that has a different extension. You can't change the default for every file with a different extension in a single operation.

  • How can I change the default page setup for printing messages in Apple Mac Version 4.6 (1085)

    How can I change the default page setup for printing messages in Apple Mac Version 4.6 (1085)

    As soon as I posted, Ifigured this one out on my own by going into user settings and changing the default there. Then I was able to delete the default @mac account. Thanks!

  • How can I change the default apple ID for app store. I bought the macbook from my school when I left and I'm the ID in place of mine is the computer departments one. How can i change it to mine?? Thanks

    How can I change the default apple ID for app store. I bought the macbook from my school when I left and I'm the ID in place of mine is the computer departments one. How can i change it to mine?? Thanks

    http://support.apple.com/kb/ht5621

  • How can I change the default pdf reader from the installed (but not yet registered) Adobe Acrobat 9 Pro to Adobe Reader XI?

    How can I change the default pdf reader from the installed (but not yet registered) Adobe Acrobat 9 Pro to Adobe Reader XI? I'm having some hiccups getting Adobe to register the software, but since I set it as the default .pdf reader during setup, things try (and fail) to open in the as yet unregistered software. How can I change it temporariiy to the Acrobat Reader XI that I have installed?

    Anubha,
    It worked! Thank you so much.
    I'd opened file with the 'Open with' feature then clicking Adobe Reader,
    but that didn't do it. When I used 'Open with', then 'Choose default
    program...', it worked like a charm.
    Again, thank you!
    Jonathan
    On Wed, Mar 18, 2015 at 10:16 PM, Anubha Goel <[email protected]>

  • How can I change the default setting for downloading photos from email?

    How can I change the default setting for downloading photos from emails I receive?  It shows the default as Photoshop Elements 4.0 and is not supported by this system.  That was my last computer!!
    Thanks,
    Sheila

    That has nothing to do with styles nor Pages, it is a System/Printer Driver setting.
    You can experiment to see if the Printer Settings stick with your document, but in the past this has not worked.
    Peter

  • How can I change the default note in adobe reader

    How can I change the default note in adobe reader

    Can you please explain your issue in detail? Are you talking about sticky notes? What 'default' state would you like to change?

  • :-)  How can we change the default file path for Bank file ( dmee ) ?

    Hi All,
    We encounter a problem.
    Electronic bank file ( created after a F110 run ) are created, in an automatic way to the DIR_TEMP directory. ( On the SAP server )
    How can we change the default file path for Bank files ( dmee ) ?
    We'd like to specify another path.
    Thx for your help.
    Erwan

    Hello,
    Make sure that you have created the directory in transaction code AL11 with the help of basis consultants.
    You can link your PC directory to the application server.
    You can maintain the path whether your file needs to get saved in OBPM4 against your DMEE structure example GB_BACS etc.
    If you do not maintain any path in OBPM4, then the file gets saved to temporary directory. If you give the directory path name in OBPM4, then the file gets saved to that directory with numbers 0001, 0002, 0003 etc till it reaches 9999 and reset from the beginning.
    If you give the path as well as file name as ABCD, then the file gets generated to that directory folder with ABCD0001, ABCD0002, ABCD0003 etc. till it reaches ABCD9999 and reset from the beginning.
    Hope this solves your problem.
    Regards,
    Ravi

  • How can I change the default fill and stroke colors for new shapes?

    As you can see in the following screen recording, after I change the stroke and fill color, all my subsequent rectangles are created respecting these new colors. But then when I delete all the rectangles, choose the rectangle shape tool once again, and start creating new rectangles, they start getting created with another color I had used some time ago (and I don't know how did it become the default color).
    http://tinypic.com/r/64jrwp/6
    So how can I change the defaults, so that the fill color is say #ddd, and the shape has no stroke at all?
    Thanks.

    When you have the shape tool selected you will see in the tool bar below - file edit etc a fill and stroke. This is where you can change the colours.
    You can keep drawing your shapes like you did in the video but then select the rectangle and change the colour from this tool bar. The reason it changes will be because you changed the colours you were using (foreground / background) that display in the left side tool bar.

  • How can I change the default  driver to OracleXADataSource in JDeveloper

    Hello,
    How can I change the default oracle driver: oracle.jdbc.OracleDriver to oracle.jdbc.xa.client.OracleXADataSource in JDeveloper Studio Edition Version 11.1.1.0.2, Build JDEVADF_MAIN.BOXER_GENERIC_090328.0229.5205.
    If I modify the file connections.xml from jdeveloper\system\system11.1.1.0.31.52.05\o.jdevimpl.rescat2\connections in the sense that I change the driver class, then in JDeveloper when I test my connection I have this problem: Test failed: oracle.jdbc.xa.client.OracleXADataSource cannot be cast to java.sql.Driver
    Why do I need this XA version of the oracle driver? Well I tried, from a book to reproduce the model of an application: entities, stateless and stateful session beans, mdb, web services and a client to test one part of the model.
    And because of the JMS server I need an XA driver.
    I deployed to the integrated wls 10.3 and when I test my client, if I use the default driver for the connection the an error message appears tell me either to emulate two-phase commit or to use XA driver.
    My application works very well, if I configured in the console of the integrated wls 10.3 a datasource with the same name as my ide/application connection that has for the Driver Class Name: oracle.jdbc.xa.client.OracleXADataSource in the Connection Pool tab.
    Thank you.

    Open DIsk Utility and in the toolbar select Disk Image. The file selector will open and you'll have to do three things: 1) just as with any file, name it and point the file selector to where you want it to be saved, 2) near the bottom you'll see name - type iWork 2013 and 3) below that select the image size. Click on size, choose custom and type 1500 MB then click on the Create button.
    Some time will pass and then you'll see an external disk pop up on your desktop and/or the Finder window sidebar. Drag the three programs into it and eject it like any other external disk. Now delete the programs from your applications window.
    Where ever it was you pointed the file selector to you'll see the file you created. Double click on it and the disk image will mount again.

Maybe you are looking for