How can I change the default number for a contact when using Siri
My husband has one mobile for work, one for home, both are in my favorites. When i'd ask Siri to dial his number, it would always ask me which one to use. Recently when calling him Siri asked if I would like to use his work number as the default and I mistakenly agreed. Now Siri never asks which number to dial and always dials the work number. How can I change that? I would like to make the default the home number.
Thanks all for your responses.
I tried to "order" Siri to change my husband's default number and whatever syntax I used for my request Siri responded with a web search on how to set favorites.
So I ended up deleting the work number from my husband's contact information and I used Siri to call him a couple of times. After 24 hours (random time frame) I added his work mobile back to his contact information, but not in the favorites.
SIri now dials his home number because it's the only one in the favorites.
I'll add it to the favorites in due course.
Similar Messages
-
How can I change the default setting for downloading photos from email?
How can I change the default setting for downloading photos from emails I receive? It shows the default as Photoshop Elements 4.0 and is not supported by this system. That was my last computer!!
Thanks,
SheilaThat has nothing to do with styles nor Pages, it is a System/Printer Driver setting.
You can experiment to see if the Printer Settings stick with your document, but in the past this has not worked.
Peter -
How can I change the phone number for messaging and FaceTime?
How can I change the phone number for messaging and FaceTime?
Unable to make or receive FaceTime calls after April 16, 2014
http://support.apple.com/kb/TS5419
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Set Up Alert Sounds
http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
iOS 7 allows you to block phone numbers or e-mail addresses from contacting you via the Phone, FaceTime, or Messages
http://howto.cnet.com/8301-11310_39-57602643-285/you-can-block-people-from-conta cting-you-on-ios-7/
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457#19087457
How to watch FaceTime calls on the big screen with Apple TV
http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Text on the iPad
http://ipad.about.com/od/ipad_tricks/a/How-To-Text-On-The-Ipad.htm
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
How to Receive SMS Messages on an iPad
http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
How can I change the default application for a content type?
Running a version of Linux, the default application for PDF files is "Use Document Viewer (default)", which appears to be /usr/bin/evince. I'd much prefer to use /usr/bin/okular; how can I change the default. This question is NOT about how to change the function that is automatically applied when I access a link, in this case "Preview in Firefox", but rather to the default application that I can select when I download a file being viewed in Firefox's previewer.
This is real progress, a solution to the problem as posted. The command:
xdg-mime default okularApplication_pdf.desktop application/pdf
makes okular the default.
However when I added okular to the choices for applications in:
* Edit>Preferences>Applications>PDF
the popup box that appears when I click Download on the preview page changed. The pulldown menu that appears next to "Open with" used to have 3 entries:
# Document Viewer (default)
# Acroread
# Other
Now it has only 2:
# Okular (Default)
# Other
I'd like it to read
# Okular (Default)
# Acroread
# Other
How can I control the entries in this pulldown list?
Also, how can I make the default choice in the popup box be
* Open With <whatever> , rather than
* Save File ? -
How can I change the default page for a book?
I have a book that contains six pages. One of the pages contains the login portlet while the others contain account specific information that a user can only see if they are logged in. Currently, I have the default page set to the login page.
I am attempting to write a backing file for the book that will esentially change the default page for the book to be one of the other pages if the user is already logged in. In effect showing a logged in user their account summary page instead of the login portlet.
I can't seem to find a way to change what page the user is shown with the book and page context classes. I can hide the login page, but this leaves the user looking at a blank page. Unfortunately I can't use entitlements, otherwise this would be easy.
Does anyone know how to "forward" to another page from a backing file?
Thanks,
Sam
Message was edited by:
straubseGot it!
In your backing file you'll need the following in your handlePostbackData method:
BookBackingContext bookCtx = BookBackingContext.getBookBackingContext(arg0);
bookCtx.setupPageChangeEvent("PageLabel"); -
How can I change the default program for the external applications editor?
I have read the on line directions for this and it reads "select a file type in the left pane." I do not see where this is in the left pane. All I see in the left pane is "Browser start pages" and a "How do I " Pane. Nothing with file types.
Hello,
Welcome to Adobe Forums.
In order to change the default program for the external applications editor. Please follow the steps as mentioned below.
Click on Edit menu then choose preferences.
Once the preferences dialog box open.
click on file editors.
On the Left pane you will find all the file types which you want to edit .
On the right hand side you will find the editors for that specific file type.
If you want to add any other application you need to click on + symbol at the top of right pane.
Select the path of that application which you want to apply.
clcik on open.
If you want to make it primay you can click make primary option available at the right hand top. For more detials please check the screenshot below.
Regards,
Rajeev -
How can I change the default font for the Text Tool in CS5?
Does anyone know of a SIMPLE way to change the default font in CS 5. I can't believe how difficult Adobe makes this. I have spent numerous time on the internet trying to solve this problem. Any help would be greatly appreciated. Thank you
Thanks Charles, I'm not sure where preferences are, I wish photoshop would
look at this, there should be a simple way to set font preferences. Perhaps
CS 7 will offer a solution. Thanks for your help
On Thu, Nov 29, 2012 at 3:08 PM, charles badland -
How can you change the default setting for the alarm for new events?
When I create a new Event, it will create an alarm that will activate 15 minutes before the event. I'd like to change the settings so the default setting would be that when I create a new event it will activate 1 day before the actual event. Is it possible to change this? Thanks.
Greetings, David.
alarm...activate 1 day before the actual event. Is it possible to change this?
Sure.
_Go to iCal > Preferences > General >"Add a default alarm to all new events and invitations"
_Change the current value from 15 minutes to whatever minute value you like (1440 for 24 hours).
_Of course this will only affect NEW events. Not those already created.
_Close the window and your done.
Hope that helps. -
How do I change the default setting for font size when emailing?
I have Firefox 3.6.13. The default now is 10 and I'd like it 12.
Firefox has no email features, it is just a web browser. Any email settings will be part of the email service that you are using, you will need to contact the support for the email service to see how to change the default font size in emails.
-
In PSE 12, how can I change the default folder for scans?
By default, PSE uses the Windows preferred location for this user. I have a folder that is easier to access, simply D:\Scans, and I have to enter this manually, as well as removing the default to set up a folder with "today's date" every time I do a scan. I would like to modify these default settings. Surely those locations must be held in an installed file somewhere, and so if I can just edit that file I'd be very happy! All help appreciated.
I have no suggestion for registry editing or setting files editing, but depending on which version of Windows you have you don't have to stick with C:\Users. Right-click the relevant folder and change the location in the Location tab.
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks. -
How can I change the default behavior for ctrl-Tab?
I tried to change the behavior of ctrl-Tab from 'Next Tab' to 'Previous Tab' and added 'alt-Tab' for 'Next Tab' in Keyconfig so I can navigate in both directions with one hand. It does not change the behavior of ctrl-Tab.
I created both these shortcuts in Keyconfig:
Next Tab
gBrowser.mTabContainer.advanceSelectedTab(1,true);
Previous Tab
gBrowser.mTabContainer.advanceSelectedTab(-1,true);
I even tried doing this from the command line with the same result:
defaults write org.mozilla.firefox NSUserKeyEquivalents -dict-add "Next Tab" "~Tab"
defaults write org.mozilla.firefox NSUserKeyEquivalents -dict-add "Previous Tab" "^Tab"
I'm not sure why this didn't work but maybe "Tab" is the wrong keyword. I couldn't find any documentation on what it should be. Or possibly "Next Tab" and "Previous Tab" don't work in this case because they are not 'built-in' commands. A third possibility is that it won't work because ctrl-Tab is a built-in shortcut but I can't believe that is why. I was able to change cmd-Q to ^-cmd-Q no problem and that is a default OS X shortcut. I was also able to change other built-in functions' shortcuts, just not this one.
So what am I doing wrong? Has anybody been able to change this particular shortcut?OK I posted a link to this thread on that forum thread but I still think this is general enough that it could be answered in this forum.
-
How can I change the default alarm for events in ical?
How to change default alarm
I've been curious about this issue as well. I think it would be nice if there were more options to select the default alarm... from within the preferences themselves. Even being able to choose how many days before vs. always figuring out how many minutes are in multiple days.
While someone has found a method for changing the sound to accompany messages, users are still not able to select the type. I prefer message only (no sound), although I supposed this is the same as the current default minus any sound. I tried blank and "" entries for 'Default alarm sound' in the .plist file with no success (blank reverts back to Basso, and "" just didn't work).
I wonder if there are some other items that could be listed in the .plist file to offer more choices such as "Default alarm type". Is there a way to figure out what key variables/values iCal uses for? Someone must have figured out that iCal will look in the .plist file for a 'default sound value'. I'm guessing that there are more of these values that could be set by the user.
A similar question - it would be nice to be able to set the default alarm time for all-day events. I suppose it doesn't matter all that much since 11:45pm probably means I'll just get the message the next morning; I still guess I'd prefer something like 8am though.
Forgive the novel...
-John -
How do I change the default folder for saving contacts?
I have happily used Outlook for several years for POP accounts. My recent addition of an Exchange account has hijacked several default behaviors that I was used to. For one, contacts are now saved by default in the exchange related contact
folder instead of the folder that is associated with my primary POP account. How do I reconfigure Outlook to saved contacts to my preferred folder, so that I don't have to constantly move the new contacts after they are saved? I do not want this
information on the exchange account. This bad behaviour occurs no matter what email account is read, from which I am saving the contact info.
To reproduce the problem: Open a message in the POP email, right click on the FROM email address, choose Add to Contacts from the menu, find the contact stored in the exchange contact folder instead of the contact folder for the POP account (the folder
that Outlook USED to save to prior to adding the exchange account).
Work around: (annoying the first few times, mentally unhealthy after more than a few) Save the contact, then manually move it to the correct folder.Hi,
What version of Outlook are you using?
I have test this in Outlook 2010/ Windows 7.
If set POP as default outlook data file(.pst),
Open a message in the POP email, and right click "Add to Contact" in FROM with External email address, it will save to POP contact folder.
If the Email address end with @Exchange.com, it always save to Exchange contact folder, no matter what is default email account, maybe this behavior by default.
Hope this helps.
William Zhou
TechNet Community Support -
How can I change the default Country for my account!!!
Hi, I just move in to U.S. and i'm trying to use the U.S. store but the systems tells me tha my account it's only valid for Venezuela... What can I do???
thanksin advance for any help!!!!To use the US store you need a US issued credit card and physical address...then go to, on your iPad, Settings > Stores > AppleID > View Apple ID > enter your password > Country/Region and change that to the US.
-
How can I change the phone number for my I message
I have a new phone number but cannot get my iPad iMessage to change to the new number
I am assuming you have an iPhone? have you gone into Settings>Messages and updated everything there, if so I would have thought an option would then be present on the iPad.
Maybe you are looking for
-
USB TV Tuner Card for Macbook Air
Dear all, Hello! i'm using a Macbook Air (mid-2012) 11.6". i'm in need of a USB tv tuner card. Which brand i should choose? Please note that, Gadmei is the most available brand in our country. is it possible to use this brand of tv tuner (USB) with M
-
I recently tried to reinstall window xp in bootcamp. I reformatted C: and tried to re-install my windows XP with service pack 2. Every time I try to install it automatically ejects and says it cant find the installation disk. Any thoughts?
-
All mail is marked as unread following iOS 7 install. How do I fix that?
All mail is marked as unread following iOS 7 install. How do I fix that?
-
I just bought the Zen Touch, I love it. I cant figure out thow to use the software it came with called Creative Media Source so I can been using Windows Medis Player 0 instead. How do I name files? How do I transfer songs from the Creative Media Sour
-
Hi, I have been creating a series of PDF forms on Adobe XI Pro that are designed to be filled in using Adobe Reader (hence are saved as Adobe Reader Extended). Once the form is complete there are signature fields that the user digitally signs which t