How can I change the description of a control Icon with property nodes?

hi
I want to change the description of a control Icon and use for this the property nodes, but I don't know how. Who can help me?
labprog

If you're referring to the control's name on the screen, you can't change the label while the VI is running because it's part of the control's definition. Instead, make the label invisible and the caption visible and use the property Caption.
If this doesn't help, elaborate more on what it is you need.
Try to take over the world!

Similar Messages

How can I change the tuning (pitch) of apple loops with logic?

how can I change the tuning (pitch) of apple loops with logic? Is it possible at all ??? Cant get a clear information . I´m a user of Logic 9.14

Thanks.....but... How to change the pitch within a song arrange, lets for example say the loop is in F in original tune and i want him to be played in the song arrange maybe in A.... when i draw it in the arrange window, the tune goes back to the original...

How can we change the description and name of Process Chain in Production

Guys,
Can anyone please help me to understand how can we change the name and description of the process chains in Production in SAP BI?
Regards

open the process chain and go to edit mode and then press Ctrl+F6 for a rename... you can only rename the description and not the technical name.
If you want to edit PC in production - esp one which has been transported - go to transport connection and change the object changeability for the same to everything changeable ( right click on the same to get this option )

How do I change the description in a url icon

Hi, I like being able to drag a url down to the dock to create a permanent shortcut to that webpage, but how do I change the description that appears above the url icon? I want to create shortcuts to some google forms I created, but when I do so the description is always the URL, which isn't helpful. I need to change the desciption so it says "timesheet" or "sign up form" instead of the url. Is that possible?
Screenshot attached to demonstrate. As you can see in the screenshot, when I hover my mouse over the URL icon, the url appears as a description. But the description is not helpful. I want to change that description to a custom description.
http://cl.ly/2w1w103S361F2K3y0v2u - screenshot

Awesome. Thanks. Found a website that showed me how to find the .png for that icon.
Here's the whole process now, in order, for perpetuity's sake.
1) Highlight the URL of the website you want to create a dock bookmark for.
2) Drag the highlighted URL to the desktop, which creates a .webloc file.
3) Open terminal and type in the following (which will open the icon in preview)
open /System/Library/CoreServices/Dock.app/Contents/Resources/url.png
4) In preview, highlight the icon and select "copy"
5) Select the .webloc file on the desktop and choose "get information", which is command-i
6. Change the name of the file to whatever you want, leaving the .webloc in place.
7) Select the small icon in the upper left corner. When you do, it will highlight.
8) Hit "command-v" to paste the icon previously selected over the old icon.
9) Now drag your newly-icon'd file to the dock, which essentially creates a shortcut.
10) Place the newly-icon'd .webloc file somewhere safe on your computer.
11) Congratulate self and thank Matthew Morgan for his help.

How can I change the color of a folder icon and also the color of the text

I am using Yosemite. Is there any way to change the color of a folder icon and also the color of the text?

You can't. You can't individually set the properties of just one array element.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

How can we change the default folder location (avoiding problems with Temporary Internet Files)

(Environment in question: Windows 7 secure desktop (running as user not admin), Office 2010)
Hello,
As has been touched on in various forums (such as here: http://forums.adobe.com/thread/797451), when one opens a PDF attachment in Outlook, Acrobat and Reader store the file in the "Temporary Internet Files" folder (f/k/a OLK folder in previous versions of Outlook. There are two major problems with this:
First, as Microsoft has documented in http://support.microsoft.com/kb/817878, attachments end up here staying here under certain conditions (go checks your now, you'll find some!), which ends up being a file attachment no man's land, and that can present security risks (e.g. if data we thought was deleted still lives in that folder).
Secondly, the first time you open an attachment in Acrobat and do a Save As, Acrobat is defaulting to the Temporary Internet Files location. This folder (as noted in the thread linked above) is ridiculously hard to get to for the average user, so they can end up storing a file and then losing it.
We've found that if we open Acrobat once, do a save as, and change to the users Documents folder, the change sticks. But how can we have Acrobat default to Documents instead of that temporary location?
Any help is greatly appreciated.

Have you check to see if Acrobat sets a registry entry or file preference for the first Save As? That's where I would start looking. Process Monitor is a good tool for this.

How can you change the style of a flash tabnavigator with css

I'd like to change the colors of a tabnavigator in flash
form.
I found an example how to change the layout for a panel but
it doesn't inherate it to my tabnavigator.
Here a simple example for a panel that works:
quote:
<cfsavecontent variable="contentPanelStyle">
panelBorderStyle:'roundCorners';
backgroundColor:#EFF7DF;
headerColors:#CBEC84, #B0D660;
</cfsavecontent>
<cfform name="myform" width="420" format="Flash"
timeout="100" >

<cfformgroup type="panel" label="With styles"
style="#contentPanelStyle#" width="400">
<cfinput type="text" name="someinput" label="your name"
/>
</cfformgroup>
</cfform>
Actually, I just want to colorize my tabnavigator items
(don't want even a panel around it). How can I do this, as example
with the same colors like the panel?
pawel

Found 1 solution for the active Tab
quote:
<cfform name="myform" width="420" format="Flash"
timeout="100" >
<cfformgroup type="tabnavigator"
style="themeColor:##CC0000;">
<cfformgroup type="page" label="Tab 1">
<cfinput type="text" name="someinpu1t" label="your name"
/>
</cfformgroup>
<cfformgroup type="page" label="Tab 2">
<cfinput type="text" name="someinput2" label="your name"
/>
</cfformgroup>
</cfformgroup>
</cfform>
But still, how do I controll the colors of the inactive Tab
and the highlight Tab (rollover mouse)?
pawel

How can I change the acct I log into MSDN with

I would like to change the email username I use to log onto MSND from something not Microsoft related to an email address that is Microsoft related. Something like [email protected] or [email protected] I have already set up accounts on Outlook and
Live but I can't figure out how to change from the email address I am currently using.
Thanks for any help that can be provided.

Are you asking about your MSDN subscription? If so you can manage here.
https://msdn.microsoft.com/subscriptions/manage/
If you're asking about your Microsoft account you can manage it here.
https://profile.live.com/
Also something here may help.
http://www.microsoft.com/en-us/account/faq.aspx
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

How can I change the polarity of my NiDAQ card with visual C++ ?

Hi,
I'm using VC++ to program a GUI to do data acquisition. I would like to change the polarity of my NIDAQ card through VC++, i.e., without using the measurement and automation software. I connot find anything about this on the internet. Could anyone please help me out?
Thank you,
bart.

While some of the details may change depending upon which card you are using, essentially you will just need to adjust the range for your signal.
You can find the command and how to use it by using the NI-DAQmx C Reference Help (Start > All Programs > National Instruments > NI-DAQ)
You might like these functions:
int32 __CFUNC DAQmxSetAIRngLow/High(TaskHandle taskHandle, const char
channel[], float64 data);
or
int32 __CFUNC DAQmxSetAIGain(TaskHandle taskHandle, const char
channel[], float64 data);
Pick your favorite and go from there.
Regards,
Otis
Training and Certification
Product Support Engineer
National Instruments

How can I change the frame around a title created with the Rectangle Tool?

In PrE 7, I have been creating titles (e.g.: Title > New Title > Default Still, etc.) for a long time and using the many ways to manipulate the text (type, color, size, animation, etc.). Today, I tried to use the Rectangle Tool (or the Ellipse Tool, or the Line Tool) and they created a beautiful 'frame' (like a picture frame: artistically designed and colored) and I can change the background color within the frame and place any text (also background picture, etc.) in it. However, I couldn't find any way to change the 'frame' or the general style of these title objects. Is there any way to do this, or this is the only design that can be created with these tools? I would greatly appreciate any help (couldn't find any in this u2u site). Thanks, Laci.

Laci,
Yes, you can apply Styles to several Rectangles (or other Shapes), to simulate a "frame." The Styles should appear as Text in the Styles Panel. Since you are working with Shapes, but viewing the Styles applied to Text, it is not perfectly intuitive as to what those Styles look like with the Shapes.
Personally, I find that doing things like "frames" in Photoshop and then Importing the PSD's into PrE is far, far easier. In that case, I would place the PSD on Video Track 1 (unless I wanted it to appear superimposed over my Video (like a PiP), and then do the text in a PrE Title, and place it above the PSD.
Here is an example:
This is a simple "picture frame" created in PS. I used a still image, instead of text in this case. These could be "wood-grained," "granite," etc.
Much more control and tons of Effects and Filters that can be applied.
Good luck,
Hunt
PS - that is from PrPro, so the GUI will look quite different, but things work the same way.

How can I change the size of table control in table maintenance re-gen?

Hello Experts,
I hv created a maintenance view and after generated table maintenance view for it.
now it adjusts the size of table control in table maintenance generation.
I want to change the size (width) of table control and again re-generate the table maintenance.
But when re-generation occurs, table control size is set to initial.
why it is happening? and wt to do to solve this issue? any user exit?
I need the changed size of table control even if its re-generated.
Regards,
R.Hanks

Hello Ronny,
Goto SM30, Enter your table name for which you have maintained your table maintainence generator .
When the maintainence screen appears for your table name , Goto System->Status->Screen Program name.
Copy that program name from there.
Open that module program through SE80,this is the program name of your SM30 screen which appears when we enter our table name in SM30 transaction.
In SE80,click the layout of the module program name you have entered there.
Its layout will display you the table control(of SM30) present to enter your your enteries.
In the change mode you can change its size , savee it and activate that program.
Now goto to SM30 again and enter your table name, it will show you the changed size of the table control used to take the enteries.
Note:This changed size is only for your table name and it will remain of its previous size for other table enteries.
Hope it helps you.
Thanks Mansi

How can i change the color of table control' lines?

Such as the subject. Thanks in advance!

Hi,
Please check,
TABLE CONTROL LINES COLOR CHANGE
color rows in table control
Regards,
Hema.
Reward points if it is useful.

How can i change the color of a blinking button?

Dear all,
how can i change the color of a blinking button with property nodes, when the button changes from "normal" state to blinking state? I can change the color of the normal state, but how can I change the color when the button is in blinking state?
thanks

jus an example
Ian F
Since LabVIEW 5.1... 7.1.1... 2009, 2010
依恩与LabVIEW
LVVILIB.blogspot.com
Attachments:
Blinking_Indicator_2003.vi ‏27 KB

I have both Photoshop 4 and Photoshop 6 on my computer. When I am in Bridge and want to open an image by double clicking, it automatically opens in 6. I see, when I go to "open with" 6 is listed as "default" How can I change the "double click" defult to o

I have both Photoshop 4 and Photoshop 6 on my computer. When I am in Bridge and want to open an image by double clicking, it automatically opens in 6. I see, when I go to "open with" 6 is listed as "default" How can I change the default to open an image with a double click in 4?

You can associate files from the Bridge level and the Desktop level.
In Bridge CS4, go to Preferences > File Type Associations and change it to Photoshop CS4 for the file types you want.
If you want to open files from the Windows Desktop in CS4, these are the instructions:
Do this from the Windows Desktop:
If you want your image file to open in Photoshop and it doesn't, right click on it and choose
Open with > Choose default program… select Photoshop CS4 or CS6 and checkmark "always use the selected program to open this type of file".

How can i change the request description?

how can i change the request description? in BI 7
Regards
Kiran

hi Kiran,
If u mean transport request; u can change it if u have not released the request.
go to se10.Double click on ur request. u will get the change icon in that page-> click on that. goto properties tab- there u will be able to change the short description.
hope it helps.
Regards,
Rathy

How can I change the description of a control Icon with property nodes?

Similar Messages

Maybe you are looking for