How can I change the duration of an animation? [Screenshot'd be nice]
Look above.
Upper right corner of clip on the Timeline, right click *see screenshot below*
https://forums.adobe.com/servlet/JiveServlet/showImage/2-5634064-383568/_Timeline.jpg
Nancy O.
Similar Messages
-
On iMovie 10.0.7 how can I change the duration of all of my photos in the project at once?
On iMovie 10.0.7 how can I change the duration of all of my photos in the project at once?
You can set the default duration of stills but you have to do it before you start the project.
iMovie is not really suitable for stop motion videos and iMovie 10 is worse than iMovie 9 because the minimum still duration is not really controllable as you have found. I don't have experience of making such videos but there are 3rd party apps which appear more suited to this, for example http://www.macworld.com/article/1146623/stop_motion_Mac.html
mentions some of them, though its a bit old and you may be able to find more up to date information.
Geoff. -
How can I change the duration for all clips in iMovie 10.2
How can I change the duration for all clips in iMovie 10.2? I'm used to working in the older version of iMovie where all I had to do was click on the gear on the clip and change the duration. ALso could use the tool bar to set the duration for all clips. Can't figure out how to do that in this new version. Any suggestions would be appreciated.
In the timeline select the clip whose duration you want to change. Click the adjust button at the top of the viewer and then click the i button and you can set the duration. For multiple clips select them all and in the i button type in the duration you want and it will be applied to all the selected clips. You can also change the duration of a clip in the timeline by putting the cursor over the beginning or end of a clip and dragging. A popup will show the new duration.
-
How can I change the duration of stills on Final Cut Pro X?
Hello everyone.
I need to change the duration of stills and I'm having a hard time doing that. I'm not interested in changing the default setting. The stills need different times, so I need to be able to manually alter the duration of each clip. Does anyone know how to do this?
Thank you!http://help.apple.com/finalcutpro/mac/10.0.6/#ver9847ec25
-
How can I change the overall duration of a project. I did it once but I can't remember and can't find the answer.
You could add more content.
Or if the project contains stills, these can be lengthened. Double-click on a still photo to open the Clip Inspector. Adjust the duration by typing in the Duration box. Be aware though that if you have transitions either side of the still, you may get odd results with the duration. See this thread for more details:
https://discussions.apple.com/thread/4269161?tstart=0
John
PS. I'm assuming you want to lengthen the project, not shorten it.
Message was edited by: John Cogdell - added PS -
This question is for Logic Express.
I have many very short audio clips that I recorded into my project.
I want to adjust the project tempo so that I can use the snap grid to make a beat out of my short audio clips. But when I change the project tempo, it automatically adjusts the lengths of my audio clips.
So how can I change the tempo (and the snap grid) of the project without altering the original audio clips?The reason some files sound funny and others don't is because audio is handled a few different in Garageband depending on it's source (audio your recorded vs Apple Loops vs non Apple Loop pre recorded audio). Each of these have different color regions with different properties. I just found this thread that might better explain it:
http://hintsforums.macworld.com/archive/index.php/t-67538.html
I hope that helps! -
How can I change the frame rate mode?
Adobe Premiere Pro exports my videos with a variable frame rate. Because of this long videos are asynchronous. How can i change the frame rate mode? So Adobe Premie Pro exports my videos with a CONSTANT frame rate? The original video has a constant frame rate...
Sorry my mistakes. I am from Germany.. so...I mean with asynchronous that the video file and the sound file are displaced. In the beginning of the Video it's normal, but if the videos is very long it goes VERY "asynchronous"
I analyzed the video with "mediainfo":
General
Format : MPEG-4
Format profile : Base Media / Version 2
Codec ID : mp42
File size : 2.00 GiB
Duration : 20mn 13s
Overall bit rate mode : Variable
Overall bit rate : 14.2 Mbps
Encoded date : UTC 2013-12-11 13:56:13
Tagged date : UTC 2013-12-11 13:58:30
©TIM : 00:00:00:00
©TSC : 30
©TSZ : 1
Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : Yes
Format settings, ReFrames : 3 frames
Format settings, GOP : M=3, N=30
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 20mn 13s
Source duration : 20mn 13s
Bit rate : 14.0 Mbps
Width : 2 560 pixels
Height : 1 440 pixels
Display aspect ratio : 16:9
Frame rate mode : Variable
Frame rate : 30.000 fps
Minimum frame rate : 30.000 fps
Maximum frame rate : 30.030 fps
Standard : PAL
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.127
Stream size : 1.98 GiB (99%)
Source stream size : 1.98 GiB (99%)
Language : English
Encoded date : UTC 2013-12-11 13:56:13
Tagged date : UTC 2013-12-11 13:56:13
Color primaries : BT.709
Transfer characteristics : BT.709
Matrix coefficients : BT.709
mdhd_Duration : 1213733
Audio
ID : 2
Format : AAC
Format/Info : Advanced Audio Codec
Format profile : LC
Codec ID : 40
Duration : 20mn 13s
Source duration : 20mn 13s
Bit rate mode : Variable
Bit rate : 158 Kbps
Maximum bit rate : 254 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 44.1 KHz
Compression mode : Lossy
Stream size : 22.8 MiB (1%)
Source stream size : 22.8 MiB (1%)
Language : English
Encoded date : UTC 2013-12-11 13:56:13
Tagged date : UTC 2013-12-11 13:56:13
mdhd_Duration : 1213777
And there i can read that the "frame rate mode" is variable... and that's the bad thing... I want to change that point to a constant frame rate mode. I use the H.264 codec -
How can I change the display of Inbox in my iPad's mail app- so that it takes up the full screen?
How can I change the display of Inbox in my iPad's mail app- so that it takes up the whole screen, as opposed to just about one third; the other two thirds display the full text of the selected email?
You can't change the display in the Mail app, if you are holding the iPad in landscape orientation then the left-hand third will be for navigation, and the right-hand two-thirds will be an email. If you hold the iPad in portrait orientation then the navigation section becomes a drop-down section.
-
How can I change the background of a running webpage on my own. Example Facebook I want to change its background color from white to black just in my view, not for all. Cause I really hate some site with white background because as I read for an hour it aches my eyes but not on those with darker background color.
You can use the NoSquint extension to set font sizes (text/page zoom) and text colors on web pages.
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/ -
Is it possible to save the screenshot files to a different folder than desktop (that is the default). How can I change the destination folder? Thank you, Sal
To change the screenshot capture location to a new place on your Mac, first think of a location that would serve you properly. We like to place ours in a "Screenshot" folder located inside of the User's "Pictures" folder. To change the location to this new location, open the Terminal and enter the following command:
defaults write com.apple.screencapture location /Users/[u]/Pictures/Screenshots/
Replace "[u]" with the name of the user on your system. Once you have entered this command, let's restart the screen capture utility by restarting the SystemUIServer by entering the following command:
killall SystemUIServer
You can optionally log out and back in instead of entering this second command, thus restarting the SystemUIServer. Once restarted, all screen captures taken from here on out will end up in your /Pictures/Screenshots/ folder in the User's home folder on your Mac. -
How can I change the default apple ID for app store. I bought the macbook from my school when I left and I'm the ID in place of mine is the computer departments one. How can i change it to mine?? Thanks
http://support.apple.com/kb/ht5621
-
When my husband and I first bought our iPhones, I was the only one with an Apple ID (since he never used iTunes). He used my apple id to get apps. Now he has his own ID, but my apple ID email address keeps popping up on his phone when he tries to download an app. We do not want to have all of the same apps on our phones. How can we change the ID on his phone? I already tried going to Settings>iTunes &App Store> and changing the Apple ID to his account email and that did not solve the problem. To make things worse, I recently changed my Apple ID email address (without getting a new ID) and I do not remember my old password (and this is the address that is popping up on his phone). He does not have any music on his phone and all of the Apps that he has are free. Any help you could offer would be great (-:
All apps are forever tied to the Apple ID that bought them. To stop your id from popping up, you need to delete the apps on his phone, and then repurchase them under his account.
-
I have both Photoshop 4 and Photoshop 6 on my computer. When I am in Bridge and want to open an image by double clicking, it automatically opens in 6. I see, when I go to "open with" 6 is listed as "default" How can I change the default to open an image with a double click in 4?
You can associate files from the Bridge level and the Desktop level.
In Bridge CS4, go to Preferences > File Type Associations and change it to Photoshop CS4 for the file types you want.
If you want to open files from the Windows Desktop in CS4, these are the instructions:
Do this from the Windows Desktop:
If you want your image file to open in Photoshop and it doesn't, right click on it and choose
Open with > Choose default program… select Photoshop CS4 or CS6 and checkmark "always use the selected program to open this type of file". -
How can we change the password in the iBook donated to our nonprofit? No password was given with the iBook and every time we try to install items, the password window pops up. We need to put in printer and other software. Help! We can use the laptop without changing the password.
If you did not get an OS X install-restore DVD with the computer you may need
to buy one from somewhere, and you may be lucky to get a retail OS X 10.5.x
version. The original grey-label install set of software and OS X it shipped with
likely would be an older system than Leopard 10.5. Last versions of G4 Mac, &
G5, shipped with a Tiger 10.4 system; so did early Intel-based Mac. Grey discs
which accompanied other computer build models generally do not interchange.
The last OS X version a PowerPC architecture can use, if supported, is 10.5.8.
A PPC processor at 867MHz & faster should be able to run OS X 10.5 Leopard.
{With the correct disc installer, you can use it to change a password and other
things including re-install, and perform disk utility functions, etc.}
There is a chance you may be able to get a white-label Replacement 10.4 DVD
or Replacement 10.5 DVD from AppleCare or the online Apple Store (800myapple)
from a Mac OS X system specialist; these have been available yet hard to get
as not all persons involved with them seem to know if they still exist until someone
is asking. These aren't retail stock, are special discs for computers who could use
a system later than original old discs; these are complete install discs not for one
specific series of Mac. Generally they'd work in supported PowerPC G4/G5; but
do not replace specialized original install DVD, such as an early Intel mac requires.
You'd need to have a serial number of the computer, and a method of payment
when seeking some replacement system media from Applecare or Apple sales
and these discs are not available in a retail store. The original Retail discs are
labeled differently and shipped in a retail box with a big X on the front. Other
sources for retail 10.4 Tiger or 10.5 Leopard may be online via amazon sellers
or computer resellers who handle repaired Macs. Avoid mystery grey label ones
that were intended to be sold and kept with their original computer kits.
Good luck! -
How can i change the email address for Icloud on my Iphone 4
I have inherited my wife's Iphone 4 when she upgraded to Iphone 5. The Icloud on the Iphone 4 is tied to her Apple ID. How can I change the Iphone 4 to my Apple ID? Thanks for any help.
For iCloud you go to Settings>iCloud and sign out and sign in with your iCloud account.
There are also many other setting that can be associated with here Apple ID like the following:
- Settings>iTunes & App Stores (sign out and sign in)
- Setting Mail
- Setting Messages and Settings>Facetime Add your own ID/email address and delete hers
Maybe you are looking for
-
Can't send email from my iPhone...
I am having problems sending email from my iPhone via my ISP and the ISP at work. I can send email through my personal domain from these places using my Mac laptop but not via the iPhone. Settings for the ISP should be SSL Off for both directions [in
-
My table has an OLE object. In report it is arranged in tabular format (Arrage ->Table -> tabular) so that if height of Other field(Let "Description") is grater than height of OLE object then height of that particular row will increased upto the heig
-
Page doesn't display correctly in Draft process
Any page on our new site looks fine in Contribute CS 6.5 when browsing the site via Contribute or when editing the page in "Edit Page" mode; but when we send a page for review, the Publisher sees PHP errors and no page is displayed. The same PHP erro
-
Reg: Downgrading and data management
Hello all, I've been experiencing some performance issues with my Mac Book Pro lately (I've been having trouble using more than 5-6 tabs in safari or chrome while using itunes and Microsoft Word); I've bought this notebook in mid 2010. It's the 13-in
-
Installing Win 7 on Boot Camp won't install to the hard drive
Hey, I'm installing Windows 7 64-BIT onto my Mac, Steps I've taken, logged onto an administrator account, ran boot camp assistant, selected Hard Drive 2 (1TB, practically empty it is not my Mac OSX Boot Drive), selected "create second partition for w