How can I change the frame rate mode?

Adobe Premiere Pro exports my videos with a variable frame rate. Because of this long videos are asynchronous. How can i change the frame rate mode? So Adobe Premie Pro exports my videos with a CONSTANT frame rate? The original video  has a constant frame rate...

Sorry my mistakes. I am from Germany.. so...I mean with asynchronous that the video file and the sound file are displaced. In the beginning of the Video it's normal, but if the videos is very long it goes VERY "asynchronous"
I analyzed the video with "mediainfo":
General
Format                                   : MPEG-4
Format profile                           : Base Media / Version 2
Codec ID                                 : mp42
File size                                : 2.00 GiB
Duration                                 : 20mn 13s
Overall bit rate mode                    : Variable
Overall bit rate                         : 14.2 Mbps
Encoded date                             : UTC 2013-12-11 13:56:13
Tagged date                              : UTC 2013-12-11 13:58:30
©TIM                                     : 00:00:00:00
©TSC                                     : 30
©TSZ                                     : 1
Video
ID                                       : 1
Format                                   : AVC
Format/Info                              : Advanced Video Codec
Format profile                           : [email protected]
Format settings, CABAC                   : Yes
Format settings, ReFrames                : 3 frames
Format settings, GOP                     : M=3, N=30
Codec ID                                 : avc1
Codec ID/Info                            : Advanced Video Coding
Duration                                 : 20mn 13s
Source duration                          : 20mn 13s
Bit rate                                 : 14.0 Mbps
Width                                    : 2 560 pixels
Height                                   : 1 440 pixels
Display aspect ratio                     : 16:9
Frame rate mode                          : Variable
Frame rate                               : 30.000 fps
Minimum frame rate                       : 30.000 fps
Maximum frame rate                       : 30.030 fps
Standard                                 : PAL
Color space                              : YUV
Chroma subsampling                       : 4:2:0
Bit depth                                : 8 bits
Scan type                                : Progressive
Bits/(Pixel*Frame)                       : 0.127
Stream size                              : 1.98 GiB (99%)
Source stream size                       : 1.98 GiB (99%)
Language                                 : English
Encoded date                             : UTC 2013-12-11 13:56:13
Tagged date                              : UTC 2013-12-11 13:56:13
Color primaries                          : BT.709
Transfer characteristics                 : BT.709
Matrix coefficients                      : BT.709
mdhd_Duration                            : 1213733
Audio
ID                                       : 2
Format                                   : AAC
Format/Info                              : Advanced Audio Codec
Format profile                           : LC
Codec ID                                 : 40
Duration                                 : 20mn 13s
Source duration                          : 20mn 13s
Bit rate mode                            : Variable
Bit rate                                 : 158 Kbps
Maximum bit rate                         : 254 Kbps
Channel(s)                               : 2 channels
Channel positions                        : Front: L R
Sampling rate                            : 44.1 KHz
Compression mode                         : Lossy
Stream size                              : 22.8 MiB (1%)
Source stream size                       : 22.8 MiB (1%)
Language                                 : English
Encoded date                             : UTC 2013-12-11 13:56:13
Tagged date                              : UTC 2013-12-11 13:56:13
mdhd_Duration                            : 1213777
And there i can read that the "frame rate mode" is variable... and that's the bad thing... I want to change that point to a constant frame rate mode. I use the H.264 codec 

Similar Messages

  • How can I change the frame rate of a project in imovie 10?

    My problem is: I made a gopro movie with a frame rate of 50 fps. I imported it to imovie. So far so good.
    Scrubbing over the clip i found one single frame which looked amazing. So I draged some seconds of that clip into the timeline (the project if you will).
    The goal was to make a freeze frame out of this "spezial" frame.
    Unfortunately I could not find this frame in the timeline any more - it's gone.
    I think imovie dropped half of the frames to fit the clip into the projekt, which I assume is using 24-25fps.
    The only solution I found is to decrease the speed of the clip to let's say 50%.
    But is there a better way?
    Can I change the frame rate of the projekt somehow? I think it was possible in imovie 11.
    many thanks
    Rainer
    (from austria)

    iMovie 10 won't share at 50 fps and so for 25 fps output probably drops every other frame.  This is different from Imovie 9 which could handle 50 fps.  However, if you do 50% speed it will use all the available frames so that is indeed the way to find the frame you want.  After you have made a freeze frame I think you can switch the clip back to normal speed.  I am not aware of a better way in iMovie 10  By the way there is also no facility to export a still of a frame in iMovie.
    As a GoPro user I think FCP 10.1 would be the best choice.
    Geoff.

  • Istopmotion. how can i change the frame rate in a project?

    so i finally got istopmotion and i love it. its a bit tricky using the built in isight to grab shots but i am getting an external one. anywho, i was wondering if there is a way, once you have started working on a project, if you can change the framerate. i started a project, got pretty far into it, and found it was too fast. i'm probably just gonna redo this project but i wanna know for the future. thx

    When you open up a new project you select your frame rate (same place where you select the format of your project). You could always slow/speed things up when you edit later in FCS or whatever you like to use for video editing.

  • How can I change the velocity rate of my animation?

    Hi all!
    I have a portion of an animation I want to play at different user-defined speeds (within a continous range of values). I saw audio and video files can be configured to that effect via their playbackRate property. Something like that but for a portion of the timeline would be great. Is that possible? I also looked into changing the framerate, but it seems it is not possible in An.
    Thanks in advance!

    Yep your are right its not possible to change the frame rate of Animate content timeline.
    But you can have the same symbol at different timeline durations and play one of them based on your parameters to give illusion of  symbol playing at different frame rates.

  • How do you change the frame rate (or fmp) of a project once you have already started?

    I have been working on a project for a long time now, and I just reliezed that the frame rate of the project was 25 where as all my clips were in 30. Is there any possible way for me to change the frame rate even though I've already started the project? or do I have to start again?
    thanks

    Hi,
    I've had a really good search through our documentation and website but there's no previous record of that error code. However, a quick google search turned up lots of things on MatLab user groups and the MathWorks forums.
    MatWork's official stance is that the PCI 7342 is not supported in MatLab. They have a list of supported hardware here:
    https://www.mathworks.co.uk/products/daq/supported/ni-daqmx.html#PCI

  • How can I change the scroll rate of a control

    I need the control to scroll at a faster rate than what Labview provides.
    How can I change this to make the control (with up/down arrows) scroll faster without holding the shift key down and while maintianing the same increment step size.

    If you really want to go above and beyond what LabVIEW gives you, you'll probably have to program it yourself. The best way to implement custom functionality for your controls is by using Event Structures. You could, for instance, hide the regular Increment/Decrement arrows for your control and replace them with custom controls that look the same. Then register for Mouse Down events and increment the control value as fast as you want in that event case. The only difficulty comes in when you need to have multiple such controls, or if you want to package them from one app to another.
    If you want a completely self-contained function that does it all and doesn't require specific block diagram implementation, you probably want XControls. XControls allow you not only to change a control's appearance but also its functionality. The end result would be a reusable control that would look and behave however you want, but wouldn't require any block diagram code from the target application. XControls, I would warn you, can be a bit advanced. Your first is the hardest. After that it sinks in
    XControls are available for LabVIEW 8 Professional Development System and higher.
    Jarrod S.
    National Instruments

  • How can I change the sample rate (delta X)?

    Hi, I create vi which can measure resistance, it will record the data and write to a file.
    however, I want to change the sample rate which is delta x. is that anyway I can do?
    I have try to put a clock inside the loop, it does slow down the speed but not the sampling rate.
    Please help me!!
    Thank you!

    Hello Shan405,
    Adjusting the Reading Rate of a DMM
    As noted in the above DeveloperZone article, there are a lot of factors contributing to a reading rate of a DMM. 'Sampling rate' can only be configured in digitizer mode, which can only be achieved on the flex DMMs
    Using the NI PXI-407x DMM as an Isolated Digitizer
    Regards,
    Glenn

  • How can I change the Video Display Mode when the Monitor displays UNSUPPORTED MODE?

    While setting up my new monitor, I changed the computer Video Display mode to 120 Hz by accident.  Now I can't see a thing on the monitor other than the words UNSUPPORTED MODE.
    My system is a newer HP Pavilion p7-1423W running Windows 8.1 with Intel i5-2320 3ghz
     I have tried the Startup mode by tapping ESC on powerup but the startup options don't help.  And the F11 option on the menu just makes the Startup screen disapear and returns the monitor to UNSUPPORTED MODE.  Tapping F8 doen't work and tapping F12 just puts me into the bios menus which don't help.
     How can I put the integrated Video Card back to a supported video mode when I can't see the screen?
    This question was solved.
    View Solution.

    Try the shift key + F8. If you can get in- doing a System Restore to a day before you messed up the setting should work without a need for Safe Mode.
    http://www.avira.com/en/support-for-home-knowledgebase-detail/kbid/1672
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • How can I change the frame around a title created with the Rectangle Tool?

    In PrE 7, I have been creating titles (e.g.: Title > New Title > Default Still, etc.) for a long time and using the many ways to manipulate the text (type, color, size, animation, etc.). Today, I tried to use the Rectangle Tool (or the Ellipse Tool, or the Line Tool) and they created a beautiful 'frame' (like a picture frame: artistically designed and colored) and I can change the background color within the frame and place any text (also background picture, etc.) in it. However, I couldn't find any way to change the 'frame' or the general style of these title objects. Is there any way to do this, or this is the only design that can be created with these tools? I would greatly appreciate any help (couldn't find any in this u2u site). Thanks, Laci.

    Laci,
    Yes, you can apply Styles to several Rectangles (or other Shapes), to simulate a "frame." The Styles should appear as Text in the Styles Panel. Since you are working with Shapes, but viewing the Styles applied to Text, it is not perfectly intuitive as to what those Styles look like with the Shapes.
    Personally, I find that doing things like "frames" in Photoshop and then Importing the PSD's into PrE is far, far easier. In that case, I would place the PSD on Video Track 1 (unless I wanted it to appear superimposed over my Video (like a PiP), and then do the text in a PrE Title, and place it above the PSD.
    Here is an example:
    This is a simple "picture frame" created in PS. I used a still image, instead of text in this case. These could be "wood-grained," "granite," etc.
    Much more control and tons of Effects and Filters that can be applied.
    Good luck,
    Hunt
    PS - that is from PrPro, so the GUI will look quite different, but things work the same way.

  • The blue background colour is not shown with my client, so how can I change the frame colour of a field?

    Hey,
    I do have a problem, my client does not see the blue marked background fields in my form. He uses the version Acrobat X1, 11.0.10. I do see it with my Acrobat Pro and the Acrobat Reader version. Now I wanted to highlight the fields with a colour or a frame colour, but I can't select any of it. I don't want to mark the fields in Indesign and then put form fields in Acrobat over it. But I don't know any other way. I'm working on a Mac, my clients uses Windows.
    Can you please help me out?
    Thank you so much,
    Anna

    They can enable it by going to Edit - Preferences - Forms and clicking the "Show border hover color for fields" box.

  • I want to play video on my computer to make some analysis to frames,the problem that I face ,I can't change video frame rate using labview,but I can change frame rate to the video out of labview using some program

    HI All
    I want to play video on my computer to make some analysis to it's frames,the problem that I face ,I can't change video frame rate using labview,but I can change frame rate to the video out of labview using some program .
    I used IMAQ AVI Read Frame VI
    for example I have avi video It's frame rate is 25 fbs ,my image processing code is very fast that can process more 25 fbs,so I want to accelerate video acquisition

    Hi abdelhady,
    I looked into this further, and reading an AVI file into LabVIEW faster than its frames per second won't be possible. LabVIEW could read in frames faster than 25fps, but because it will be pulling the available frame at that point in time this would just give you duplicate frames. If you want to be able to read in frames at faster than 25fps, you would need to speed up your AVI file before reading into LabVIEW.
    There's a good shipping example to show how to read in from an AVI file, "Read AVI File.vi". You'll notice that they add timing to make sure that the while loop runs at the right speed to match up with the frames per second of the file being read. This is to make sure you're not reading duplicate frames.
    Thank you,
    Emily C
    Applications Engineer
    National Instruments

  • How do I set the frame rate to 12fps on my video, and it not change randomly?

    Hi, I imported a video layer from file then set the frame rate to 12fps, when I play the video it keeps changing the frame rate to random times. How do I keep it at 12fps

    Click the windows start button, then right click on computer, this will bring up a window that will tell you how much ram your system has.
    Also Start>Accessories>System Tools>System Information will give you all the details you need to know.
    As for Codec, That is an abreviation for code/decode it tells windows how to code when saving a video and how to decode when playing a video. Most formats are wrappers (avi, wmv, mov, rt) Each of these have a codec that you can choose from when saving a video, that codec then must be installed on the users computer to see that same video. Most formats come with a basic number of codecs and the creator of the video can purchase other codecs that provide better feature set.
    What the codec really does is takes the video and compresses it like a zip file then the user when playing require that codec to uncompress it.
    So each codec has its own strength and weaknesses. Some can compress more making a smaller file and perhaps inturn removes more data to get that compression and therefore has a poorer quailty video (just an example)
    I am sure you heard of a few codecs if you think about it. mpg, mp2, mp3, mp4, h.264 and so on. Mp3 is the only one I listed here that is for audio only. Yep thats right even audio uses codecs.

  • How can i change the zoom mode?

    how can i change the zoom mode? the illustrator cc 2014 default is zoom with drag, like photoshop. i want to change to previous mode

    Just had this myself, you need to either...
    Start document with a 'Print' profile instead of 'Web' or 'TV' and it will use 'Marquee Zoom' instead of 'Scrubby Zoom'
    or
    Goto Edit >  Preferences > Experimental Feature and turn off 'Enable Animated Zoom'

  • Is it possible to change the frame rate of a motion template?

    Motion has some very useful templates, but the majority are only offered in NTSC, not PAL. (including all in 3D TEXT PROJECTS).
    Is it possible to change the frame rate to 25fps before I start adding my own stuff, so that I can easily get the timing right for a PAL sequence in FCP.
    If not in Motion, how else could this been changed?

    Try dragging all the groups from one project into another instead - you'll need to open both project and rearrange the windows so you can see the layers tab for both of them.

  • Would you like to change the frame rate of the project to 30 to match to m

    I just now moved some film clips from the Event Library to the Project Library and a white message window appeared saying: *MISMATCHED FRAME RATES. The frame rate of t his cli is 30 and the frame rate of the project is 25. Would you like to change the frame rate of the project to 30 to match the clip? And two radio buttons: Don't Change and Change.
    First of all, the other day I set my Sanyo VPC-HD2000A to shoot film at 1280 x 72 at 30 fps SHQ. Now I just checked and it is set at the topmost red zone960 x 540 at 30fps. The only thing I can think of to explain this is that I selected it but did not "set" it.
    Thus now I have a message asking what I noted above. Should I click CHANGE?
    WHY IS THE FRAME RATE OF THE PROJECT SET AT 25? How did I do that? What did I do that caused me to have a project that is set at 25 fps?????
    Time for another snack. 8-(
    -L
    A side issue is to find out why I set my Sanyo VPC-HD2000A at one rate (above) but now see that all the footage was shot at a different rate. Very very frustrating.

    AppleMan,
    It all began inside the settings of my Sanyo VPC-HD2000A when somehow the selection got switched from 1280 x 720 to that other setting with so-called 25fps. Also, I don't know whether the mishap occurred before or after I took my new footage.
    I edited the clips last night and now they are on my blog and channel and they seem ok but slightly fuzzy.
    I used a Sanyo VPC-HD2000A .7x wide angle lens with macro and I notice that when I zoomed in to the little sun conure, the picture blurred. I think that might be something that happens when one zooms the focus.
    Also, I was born and raised to a teenager in Hawaii, but now Southern California has me in its grip.
    -L

Maybe you are looking for