How can I change the frame rate of a project in imovie 10?
My problem is: I made a gopro movie with a frame rate of 50 fps. I imported it to imovie. So far so good.
Scrubbing over the clip i found one single frame which looked amazing. So I draged some seconds of that clip into the timeline (the project if you will).
The goal was to make a freeze frame out of this "spezial" frame.
Unfortunately I could not find this frame in the timeline any more - it's gone.
I think imovie dropped half of the frames to fit the clip into the projekt, which I assume is using 24-25fps.
The only solution I found is to decrease the speed of the clip to let's say 50%.
But is there a better way?
Can I change the frame rate of the projekt somehow? I think it was possible in imovie 11.
many thanks
Rainer
(from austria)
iMovie 10 won't share at 50 fps and so for 25 fps output probably drops every other frame. This is different from Imovie 9 which could handle 50 fps. However, if you do 50% speed it will use all the available frames so that is indeed the way to find the frame you want. After you have made a freeze frame I think you can switch the clip back to normal speed. I am not aware of a better way in iMovie 10 By the way there is also no facility to export a still of a frame in iMovie.
As a GoPro user I think FCP 10.1 would be the best choice.
Geoff.
Similar Messages
-
Istopmotion. how can i change the frame rate in a project?
so i finally got istopmotion and i love it. its a bit tricky using the built in isight to grab shots but i am getting an external one. anywho, i was wondering if there is a way, once you have started working on a project, if you can change the framerate. i started a project, got pretty far into it, and found it was too fast. i'm probably just gonna redo this project but i wanna know for the future. thx
When you open up a new project you select your frame rate (same place where you select the format of your project). You could always slow/speed things up when you edit later in FCS or whatever you like to use for video editing.
-
How can I change the frame rate mode?
Adobe Premiere Pro exports my videos with a variable frame rate. Because of this long videos are asynchronous. How can i change the frame rate mode? So Adobe Premie Pro exports my videos with a CONSTANT frame rate? The original video has a constant frame rate...
Sorry my mistakes. I am from Germany.. so...I mean with asynchronous that the video file and the sound file are displaced. In the beginning of the Video it's normal, but if the videos is very long it goes VERY "asynchronous"
I analyzed the video with "mediainfo":
General
Format : MPEG-4
Format profile : Base Media / Version 2
Codec ID : mp42
File size : 2.00 GiB
Duration : 20mn 13s
Overall bit rate mode : Variable
Overall bit rate : 14.2 Mbps
Encoded date : UTC 2013-12-11 13:56:13
Tagged date : UTC 2013-12-11 13:58:30
©TIM : 00:00:00:00
©TSC : 30
©TSZ : 1
Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : Yes
Format settings, ReFrames : 3 frames
Format settings, GOP : M=3, N=30
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 20mn 13s
Source duration : 20mn 13s
Bit rate : 14.0 Mbps
Width : 2 560 pixels
Height : 1 440 pixels
Display aspect ratio : 16:9
Frame rate mode : Variable
Frame rate : 30.000 fps
Minimum frame rate : 30.000 fps
Maximum frame rate : 30.030 fps
Standard : PAL
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.127
Stream size : 1.98 GiB (99%)
Source stream size : 1.98 GiB (99%)
Language : English
Encoded date : UTC 2013-12-11 13:56:13
Tagged date : UTC 2013-12-11 13:56:13
Color primaries : BT.709
Transfer characteristics : BT.709
Matrix coefficients : BT.709
mdhd_Duration : 1213733
Audio
ID : 2
Format : AAC
Format/Info : Advanced Audio Codec
Format profile : LC
Codec ID : 40
Duration : 20mn 13s
Source duration : 20mn 13s
Bit rate mode : Variable
Bit rate : 158 Kbps
Maximum bit rate : 254 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 44.1 KHz
Compression mode : Lossy
Stream size : 22.8 MiB (1%)
Source stream size : 22.8 MiB (1%)
Language : English
Encoded date : UTC 2013-12-11 13:56:13
Tagged date : UTC 2013-12-11 13:56:13
mdhd_Duration : 1213777
And there i can read that the "frame rate mode" is variable... and that's the bad thing... I want to change that point to a constant frame rate mode. I use the H.264 codec -
How can I change the overall duration of a project. I did it once but I can't remember and can't find the answer.
You could add more content.
Or if the project contains stills, these can be lengthened. Double-click on a still photo to open the Clip Inspector. Adjust the duration by typing in the Duration box. Be aware though that if you have transitions either side of the still, you may get odd results with the duration. See this thread for more details:
https://discussions.apple.com/thread/4269161?tstart=0
John
PS. I'm assuming you want to lengthen the project, not shorten it.
Message was edited by: John Cogdell - added PS -
How can I change the velocity rate of my animation?
Hi all!
I have a portion of an animation I want to play at different user-defined speeds (within a continous range of values). I saw audio and video files can be configured to that effect via their playbackRate property. Something like that but for a portion of the timeline would be great. Is that possible? I also looked into changing the framerate, but it seems it is not possible in An.
Thanks in advance!Yep your are right its not possible to change the frame rate of Animate content timeline.
But you can have the same symbol at different timeline durations and play one of them based on your parameters to give illusion of symbol playing at different frame rates. -
How do you change the frame rate (or fmp) of a project once you have already started?
I have been working on a project for a long time now, and I just reliezed that the frame rate of the project was 25 where as all my clips were in 30. Is there any possible way for me to change the frame rate even though I've already started the project? or do I have to start again?
thanksHi,
I've had a really good search through our documentation and website but there's no previous record of that error code. However, a quick google search turned up lots of things on MatLab user groups and the MathWorks forums.
MatWork's official stance is that the PCI 7342 is not supported in MatLab. They have a list of supported hardware here:
https://www.mathworks.co.uk/products/daq/supported/ni-daqmx.html#PCI -
How can I change the scroll rate of a control
I need the control to scroll at a faster rate than what Labview provides.
How can I change this to make the control (with up/down arrows) scroll faster without holding the shift key down and while maintianing the same increment step size.If you really want to go above and beyond what LabVIEW gives you, you'll probably have to program it yourself. The best way to implement custom functionality for your controls is by using Event Structures. You could, for instance, hide the regular Increment/Decrement arrows for your control and replace them with custom controls that look the same. Then register for Mouse Down events and increment the control value as fast as you want in that event case. The only difficulty comes in when you need to have multiple such controls, or if you want to package them from one app to another.
If you want a completely self-contained function that does it all and doesn't require specific block diagram implementation, you probably want XControls. XControls allow you not only to change a control's appearance but also its functionality. The end result would be a reusable control that would look and behave however you want, but wouldn't require any block diagram code from the target application. XControls, I would warn you, can be a bit advanced. Your first is the hardest. After that it sinks in
XControls are available for LabVIEW 8 Professional Development System and higher.
Jarrod S.
National Instruments -
How can I change the frame around a title created with the Rectangle Tool?
In PrE 7, I have been creating titles (e.g.: Title > New Title > Default Still, etc.) for a long time and using the many ways to manipulate the text (type, color, size, animation, etc.). Today, I tried to use the Rectangle Tool (or the Ellipse Tool, or the Line Tool) and they created a beautiful 'frame' (like a picture frame: artistically designed and colored) and I can change the background color within the frame and place any text (also background picture, etc.) in it. However, I couldn't find any way to change the 'frame' or the general style of these title objects. Is there any way to do this, or this is the only design that can be created with these tools? I would greatly appreciate any help (couldn't find any in this u2u site). Thanks, Laci.
Laci,
Yes, you can apply Styles to several Rectangles (or other Shapes), to simulate a "frame." The Styles should appear as Text in the Styles Panel. Since you are working with Shapes, but viewing the Styles applied to Text, it is not perfectly intuitive as to what those Styles look like with the Shapes.
Personally, I find that doing things like "frames" in Photoshop and then Importing the PSD's into PrE is far, far easier. In that case, I would place the PSD on Video Track 1 (unless I wanted it to appear superimposed over my Video (like a PiP), and then do the text in a PrE Title, and place it above the PSD.
Here is an example:
This is a simple "picture frame" created in PS. I used a still image, instead of text in this case. These could be "wood-grained," "granite," etc.
Much more control and tons of Effects and Filters that can be applied.
Good luck,
Hunt
PS - that is from PrPro, so the GUI will look quite different, but things work the same way. -
How can I change the sample rate (delta X)?
Hi, I create vi which can measure resistance, it will record the data and write to a file.
however, I want to change the sample rate which is delta x. is that anyway I can do?
I have try to put a clock inside the loop, it does slow down the speed but not the sampling rate.
Please help me!!
Thank you!Hello Shan405,
Adjusting the Reading Rate of a DMM
As noted in the above DeveloperZone article, there are a lot of factors contributing to a reading rate of a DMM. 'Sampling rate' can only be configured in digitizer mode, which can only be achieved on the flex DMMs
Using the NI PXI-407x DMM as an Isolated Digitizer
Regards,
Glenn -
Hey,
I do have a problem, my client does not see the blue marked background fields in my form. He uses the version Acrobat X1, 11.0.10. I do see it with my Acrobat Pro and the Acrobat Reader version. Now I wanted to highlight the fields with a colour or a frame colour, but I can't select any of it. I don't want to mark the fields in Indesign and then put form fields in Acrobat over it. But I don't know any other way. I'm working on a Mac, my clients uses Windows.
Can you please help me out?
Thank you so much,
AnnaThey can enable it by going to Edit - Preferences - Forms and clicking the "Show border hover color for fields" box.
-
How can I change the title backgrounds in a project from a converted movie trailer theme?
I converted a movie trailer theme (action) to a movie. The title backgrounds are all red but I like the effects. I would like the background color to be blue. Thanks for your help!
Unfortunately I tried doing a swap with a color background and it looks like it doesn't let you just drag a replacement background in. So the best you can expect is to drag a color background from the Map tool browser (it has a globe icon on it) and drag it next to the background you want to use, set the duration to be the same length. Drag the tite block to the new color background clip. Then delete the background from the original Movie trailer version.
-
How can I change the black background around my photos in iMovie?
I hope you geniuses can help me with this. I am making a slide show in iMovie, but any portrait style photo has a wide black background. I've spent far too many hours trying to fix it (calling Apple Support etc.) but I'm still stumped.
One thought-- if I could convert my jpgs to a video file I could layer them because I movie allows you to layer video files over backgrounds.
Any ideas for me? Much appreciated. MichelleWhy not use one of the many graphic editing programs that are available (some are free) to create a new image with the desired background and aspect ratio with your portrait image in the middle?
Dan
P.S. Actually the best results would be to use Aperture but that's another 80 bucks. -
How do I change the aspect ration on a project in iMovie '12?
I'm trying to edit HD quality videos and post them on Vine; however, every time I use iMovie, I get nasty letterboxes. I need an aspect ratio of 1:1 to fit the screen on vine. Any help please?
There is no iMovie '12 but I assume you mean the latest version which would be '13 but which Apple now likes to be known by its version number, 10. (Yes its confusing).
iMovie 10, unlike earlier versions (and Final Cut Pro), only works with 16x9 aspect ratio. So you have to share at 16:9 then use a third party app like MpegStreamclip to produce a 480x480 pixel for Vine. This post gives more details:
Re: How to change movie dimensions in iMovie 10?
By the way 480x480 is not even TV quality let alone HD.
Geoff. -
HI All
I want to play video on my computer to make some analysis to it's frames,the problem that I face ,I can't change video frame rate using labview,but I can change frame rate to the video out of labview using some program .
I used IMAQ AVI Read Frame VI
for example I have avi video It's frame rate is 25 fbs ,my image processing code is very fast that can process more 25 fbs,so I want to accelerate video acquisitionHi abdelhady,
I looked into this further, and reading an AVI file into LabVIEW faster than its frames per second won't be possible. LabVIEW could read in frames faster than 25fps, but because it will be pulling the available frame at that point in time this would just give you duplicate frames. If you want to be able to read in frames at faster than 25fps, you would need to speed up your AVI file before reading into LabVIEW.
There's a good shipping example to show how to read in from an AVI file, "Read AVI File.vi". You'll notice that they add timing to make sure that the while loop runs at the right speed to match up with the frames per second of the file being read. This is to make sure you're not reading duplicate frames.
Thank you,
Emily C
Applications Engineer
National Instruments -
How do I set the frame rate to 12fps on my video, and it not change randomly?
Hi, I imported a video layer from file then set the frame rate to 12fps, when I play the video it keeps changing the frame rate to random times. How do I keep it at 12fps
Click the windows start button, then right click on computer, this will bring up a window that will tell you how much ram your system has.
Also Start>Accessories>System Tools>System Information will give you all the details you need to know.
As for Codec, That is an abreviation for code/decode it tells windows how to code when saving a video and how to decode when playing a video. Most formats are wrappers (avi, wmv, mov, rt) Each of these have a codec that you can choose from when saving a video, that codec then must be installed on the users computer to see that same video. Most formats come with a basic number of codecs and the creator of the video can purchase other codecs that provide better feature set.
What the codec really does is takes the video and compresses it like a zip file then the user when playing require that codec to uncompress it.
So each codec has its own strength and weaknesses. Some can compress more making a smaller file and perhaps inturn removes more data to get that compression and therefore has a poorer quailty video (just an example)
I am sure you heard of a few codecs if you think about it. mpg, mp2, mp3, mp4, h.264 and so on. Mp3 is the only one I listed here that is for audio only. Yep thats right even audio uses codecs.
Maybe you are looking for
-
Issue with RMAN DUPLICATE FROM ACTIVE DATABASE....
Hi All, Not sure if I should continue from a closed thread, so apologies, opening a new one.. I ran the following command: DUPLICATE TARGET DATABASE TO ' AUX1" from ACTIVE DATABASE NOFILENAMECHECK: So the copy went in fine...so I am confiused now....
-
The document shows in the printer viewer, but it is paused and will not print.
Hi, when ever I try to print anything, the doc is in the viewer but is always paused, and will not print. I've tried to restart, but it will not do it. Any advice?
-
Inactive sessions increasing over time
But, the number of open connectios(ie.,other than SYSTEM active session, i could see only inactive sessions ) is not staying constant. Rather,it grows over time. [NOTE: I dont know why the application user sessions are always in inactive state. If th
-
COULD U PLZ TEL ME..WHAT IS ORACLE RECOMMENDED WHETHER IS PHYSICAL OR LOGICAL STANDBY.IF LOGICAL STANDBY MEANS HOW CAN WE SWITCHOVER DATABASE DURING FAILS..
-
Gurus- I am loading the data from Data Stage to BW. First load went thru with out any errors. When Data Stage team scheduled load for second time then I see Red indicator in "Request Status" as well as in "Status" tab. When I go to details tab I see