How can i change the length of a line like-particle in Particle World settings?

I made a Particle World with the Line type of particles, but i want to change the individual length of the particles (the lines) is this possible somehow?
Thanks in regard. 

Nope.
Mylenium

Similar Messages

  • How can I change the length of multiple lines at the same time?

    This just seems like it should be a no-brainer, but obviously for me it isn't.  I'm trying to change the length of multiple lines, that are at different angles, at the same time, in CS4.  Basically, I design the face of dials used for airplane instrument gauges (like RPM, Torque, etc), and they have gradiation marks (lines) located all around, similar what a clock looks like with the hour and minute gradiation marks (lines).  Is there a way to select all the lines, that I know are the same length, and change it to a different length, that's accurate to the 1/100th of an inch?  It would just be like selecting multiple lines that have all the same stroke, then using the stroke box to change the stroke weight from .025in to .030in.
    I've used the transform box to change the 'height' of a line before, but the line has to be at 90 degrees (straight up and down), and that won't work for the lines that are at, say, a 45 degree angle.
    I hope i'm explaining this in a way that someone will understand. If not, I can sure try to clarify more, or insert the picture so you could see what i'm talking about.
    Thanks for any help you can give!

    OK, after fiddling around with everyone's ideas, I think I finally got it. I knew there had to be something with proportions between W and H, but couldn't figure out the math, until Jacob answered with:
    "If each line must be strecthed from the inner/outer end, you may select each and use the Transform palette, choosing the right Reference Point, multiplying by the proportion in W or H (1.75/1.5), and Ctrl/Cmd clicking."
    Now, I basically did everything above, (but I couldn't figure out what you were talking about with the Ctrl Clicking thing), except after figuring out the right proportion (which ends up being so small you guys would die if I told you the number; the numbers I gave earlier were just an example and much larger than what i'm really working with) I just clicked the little chain next to the W and H boxes to constrain the proportions. I then put the new number (multiplied proportion by whatever was in W) in the W box. The line lengthened perfectly toward the center of the dial, keeping the correct angle!
    And Harron-Thanks for the link to Teri's, It is going to help with some things I do, but most of the dials I design don't have equal distances between each gradiation mark, and the blueprints I work off of usually have exactly what distances that the grad. marks are supposed to be. So, after selecting one of my grad marks that is already at it's correct place, I then use the rotate tool and Alt-Clicking the very center of the dial, I can then put in exactly what distance I want the next grad. mark to be at, I hit copy (instead of OK) and there will be a new grad. mark exactly the correct distance from my original. Then if I want to have the 3rd grad. mark I just hit Ctrl-D and it will copy another mark to the next position. I don't know if you necessarily wanted to know all that, but i thought i'd explain why I like doing it that way.
    A BIG thanks to everyone! I'm really a AI newbie and am the only one at my company that knows how to use it, so I don't have anyone close to ask stupid questions to. So I appreciate all your help!

  • How can i change the length of a narration ?

    how can i change the length of a narration ?

    hotts77
    Thanks for the reply.
    Still not sure what version of Premiere Elements that you are using. But, the following should apply nonetheless
    What you describe is what I have described in my blog post and for which I have discussed all aspects of the issue. There
    is no workaround to force the program to give you more than you are getting now without other clips also on the track(s). The
    blog post just about says it all.
    You might have to weigh the pros and cons of
    a. Recording your narrations as .wav files in a free audio editor such as Audacity
    Audacity: Free Audio Editor and Recorder
    and then importing those into your Premiere Elements project with Premiere Elements' Add Media/Files and Folders/Project Assets from where you drag the narration to the Narration Track.
    b. Put any video clips on the Timeline when you are recording your Premiere Elements narrations with its Narration Tool. Then remove these video clips and replace them with the real thing when you are ready to put narration and clips into the project.
    Please let me know if you are OK with the details.
    Thank you.
    ATR

  • How can we change the length of the description

    Hi
    I would like to change the length of the description under template maintenance --> General Tab --> Description.
    If you can't understand my question pls go through the below link
    http://help.sap.com/saphelp_nw2004s/helpdata/en/af/348d400da8d838e10000000a155106/frameset.htm
    Thanks in Advance

    Please do not cross post

  • How can i change the below fixed app line's and the app groups's background colour?!

    I Now upgraded my iPhone4S to iOS7, and I hate this colour (betwen pink and "magenta"), but i don't know, i don't find, how can i change ír?!

    With iOS 7, Apple has began to emulate the aesthetics of the country in which its' devices are manufactured.
    Beijing's watercube is eerily reminiscent of the new home screen on my iPhone.

  • How can I change the thickness of a line in a Picture object?

    I want to change the thickness of the line in a Polar Plot. I can easy change the color but not the thickness of the line displaying the data. I have seen that the 'polar Plot' function use the 'Draw Line' function of the 'Picture Functions'. Do you have a solution? Thanks in advance.

    Hi Jean-Michel,
    If you dig down a few levels from the top-level Polar Plot VI, you will find vi.lib\picture\polarplt.llb\Plot Polar Data.vi. Inside this VI is a VI called "Draw Multiple Lines.vi", which has a "pen" input. This input is currently not wired, so it defaults to a line style of "Solid", and a width of "1". If you take this input and propogate it all the way up to the top-level Polar Plot VI, you can now specify the line width and style of your polar plot.
    I have submitted this as a suggestion, so perhaps we will see it in a future version of LabVIEW.
    -D
    Darren Nattinger, CLA
    LabVIEW Artisan and Nugget Penman

  • How can i change the color of menu shortcuts like in photoshop?

    Hello!
    In Photoshop there's this nice feature in which you can edit every shortcut (like open file, close, palettes, etc.) of the menus (file, edit, etc.) so they have a color and they're easily recognisable. How can I do the same on other mac program? I'd like e.g. my "special character" palette in Pages to be colored, so I don't have to go to "Help" to find it...And some other useful stuff... Is it possibile? Thank!
    Luca

    Has to be written into the app by the developer. Send them a suggestion to add such a feature.

  • How can I change the length value of all notes in a score, .e.g., double the length, or halve the length)?

    I'd like to change the score of a composition so that the quarter notes are eighth notes, the half notes are quarter notes, the whole notes are half notes, etc.  Is there a way to accomplish this uniformaly, all at once, in Logic Pro 9?

    I am assuming that you have done a lot of work already on an Arrangement and now want to change the whole arrangement globaly.  Here is how I would do it:
    1 - Make sure your midi notes are all quantised and of uniform length whatever their note values. ( This applies especially  if you have played the notes in in real time from a keyboard which is likely that they will be uneven - so quantize the lot before doing this. If you have 'written' or dragged the notes in Step Time then it is not so critical)
    2 - Select all the regions and then grab the Right hand end while holding down OPTION and SHIFT - you will be able to drag all the regions to the same uniform length.
    3 -  Calculate the entire length of the regions you have already written and round them off to a set number of bars. Let's say for example the regions extend from bar 1 - to bar 16. You are going to reduce the regions to exactly half their length by OPTION dragging the regions smaller. That way you will get quarter notes halving to 8th notes. ( If it was the other way round you would OPTION drag the regions larger the other way)
    Hope that helps
    Best
    MS

  • My passcode should be 5 digits not 4.  How can I change the length of my iPhone passcode?

    My company requires the passcode on my iPhone to be at least 5 digits to be in compliance with their Enterprise policy.  Can I do that?

    Yes. Settings - General - Passcode Lock - (enter current passcode) - turn Simple Passcode OFF. Then enter new code.
    Matt

  • How can we change the Apple ID on our iPad to another owner?

    How can we change the Apple ID on our iPad to another owner?

    Settings->iTunes and App Stores->Apple ID->Sign Out     Sign in with another Apple ID.
    However all Apps purchased with the previous ID will be forever tied to it and will always require it to update.
    So if you plan on changing owners its better to wipe the iPad clean, and let the new owner set it up from scratch.
    Settings->General->Reset->Erase All Content and Settings will put the iPad back to the way it was when it was first taken out of the box.

  • How can I adjust the length of a note? Please help.

    How can I adjust the length (the sustain time) of a note after I have selected the note? Many thanks.

    Just drag the right end back and forth (mouse over the end of the note - a ] appears) - by holding down ctrlshiftdragging you can change the subdivision into ticks. In the Midi event editor you can do it numerically - just change the numbers displayed in the length section.

  • How do I change the length of multiple photo's after I've added them?

    How do I change the length of multiple photo's after I've added them?

    Hey,
    The best way to do this is to select all the clips by holding down the shift key or command key if the clips you want to change are not all right next to each other and then selecting each clip that you want to change. Then double-click on the clips which will open up the inspector tab and then you can change the duration. If you want to just change all clips to the same duration just double-click on one of the photos and in the inspector tab next to the durationt tab you will see a box that says "add duration to all clips". If you click that, when you change the duration all the photos will change to that duration. That will then change the duration of all the clips at the same time.

  • How can I change the tempo (and the snap grid) of the project without altering the duration of the original audio clips?

    This question is for Logic Express.
    I have many very short audio clips that I recorded into my project.
    I want to adjust the project tempo so that I can use the snap grid to make a beat out of my short audio clips. But when I change the project tempo, it automatically adjusts the lengths of my audio clips.
    So how can I change the tempo (and the snap grid) of the project without altering the original audio clips?

    The reason some files sound funny and others don't is because audio is handled a few different in Garageband depending on it's source (audio your recorded vs Apple Loops vs non Apple Loop pre recorded audio). Each of these have different color regions with different properties.  I just found this thread that might better explain it:
    http://hintsforums.macworld.com/archive/index.php/t-67538.html
    I hope that helps!

  • How can I change the display of Inbox in my iPad's mail app- so that it takes up the full screen?

    How can I change the display of Inbox in my iPad's mail app- so that it takes up the whole screen, as opposed to just about one third; the other two thirds display the full text of the selected email?

    You can't change the display in the Mail app, if you are holding the iPad in landscape orientation then the left-hand third will be for navigation, and the right-hand two-thirds will be an email. If you hold the iPad in portrait orientation then the navigation section becomes a drop-down section.

  • How can I change the background of a running webpage on my own. Example Facebook I want to change its backround color from white to black just in my view not for all

    How can I change the background of a running webpage on my own. Example Facebook I want to change its background color from white to black just in my view, not for all. Cause I really hate some site with white background because as I read for an hour it aches my eyes but not on those with darker background color.

    You can use the NoSquint extension to set font sizes (text/page zoom) and text colors on web pages.
    *NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

Maybe you are looking for