How can i change the length of a narration ?

how can i change the length of a narration ?

hotts77
Thanks for the reply.
Still not sure what version of Premiere Elements that you are using. But, the following should apply nonetheless
What you describe is what I have described in my blog post and for which I have discussed all aspects of the issue. There
is no workaround to force the program to give you more than you are getting now without other clips also on the track(s). The
blog post just about says it all.
You might have to weigh the pros and cons of
a. Recording your narrations as .wav files in a free audio editor such as Audacity
Audacity: Free Audio Editor and Recorder
and then importing those into your Premiere Elements project with Premiere Elements' Add Media/Files and Folders/Project Assets from where you drag the narration to the Narration Track.
b. Put any video clips on the Timeline when you are recording your Premiere Elements narrations with its Narration Tool. Then remove these video clips and replace them with the real thing when you are ready to put narration and clips into the project.
Please let me know if you are OK with the details.
Thank you.
ATR

Similar Messages

  • How can I change the length of multiple lines at the same time?

    This just seems like it should be a no-brainer, but obviously for me it isn't.  I'm trying to change the length of multiple lines, that are at different angles, at the same time, in CS4.  Basically, I design the face of dials used for airplane instrument gauges (like RPM, Torque, etc), and they have gradiation marks (lines) located all around, similar what a clock looks like with the hour and minute gradiation marks (lines).  Is there a way to select all the lines, that I know are the same length, and change it to a different length, that's accurate to the 1/100th of an inch?  It would just be like selecting multiple lines that have all the same stroke, then using the stroke box to change the stroke weight from .025in to .030in.
    I've used the transform box to change the 'height' of a line before, but the line has to be at 90 degrees (straight up and down), and that won't work for the lines that are at, say, a 45 degree angle.
    I hope i'm explaining this in a way that someone will understand. If not, I can sure try to clarify more, or insert the picture so you could see what i'm talking about.
    Thanks for any help you can give!

    OK, after fiddling around with everyone's ideas, I think I finally got it. I knew there had to be something with proportions between W and H, but couldn't figure out the math, until Jacob answered with:
    "If each line must be strecthed from the inner/outer end, you may select each and use the Transform palette, choosing the right Reference Point, multiplying by the proportion in W or H (1.75/1.5), and Ctrl/Cmd clicking."
    Now, I basically did everything above, (but I couldn't figure out what you were talking about with the Ctrl Clicking thing), except after figuring out the right proportion (which ends up being so small you guys would die if I told you the number; the numbers I gave earlier were just an example and much larger than what i'm really working with) I just clicked the little chain next to the W and H boxes to constrain the proportions. I then put the new number (multiplied proportion by whatever was in W) in the W box. The line lengthened perfectly toward the center of the dial, keeping the correct angle!
    And Harron-Thanks for the link to Teri's, It is going to help with some things I do, but most of the dials I design don't have equal distances between each gradiation mark, and the blueprints I work off of usually have exactly what distances that the grad. marks are supposed to be. So, after selecting one of my grad marks that is already at it's correct place, I then use the rotate tool and Alt-Clicking the very center of the dial, I can then put in exactly what distance I want the next grad. mark to be at, I hit copy (instead of OK) and there will be a new grad. mark exactly the correct distance from my original. Then if I want to have the 3rd grad. mark I just hit Ctrl-D and it will copy another mark to the next position. I don't know if you necessarily wanted to know all that, but i thought i'd explain why I like doing it that way.
    A BIG thanks to everyone! I'm really a AI newbie and am the only one at my company that knows how to use it, so I don't have anyone close to ask stupid questions to. So I appreciate all your help!

  • How can we change the length of the description

    Hi
    I would like to change the length of the description under template maintenance --> General Tab --> Description.
    If you can't understand my question pls go through the below link
    http://help.sap.com/saphelp_nw2004s/helpdata/en/af/348d400da8d838e10000000a155106/frameset.htm
    Thanks in Advance

    Please do not cross post

  • How can I change the length value of all notes in a score, .e.g., double the length, or halve the length)?

    I'd like to change the score of a composition so that the quarter notes are eighth notes, the half notes are quarter notes, the whole notes are half notes, etc.  Is there a way to accomplish this uniformaly, all at once, in Logic Pro 9?

    I am assuming that you have done a lot of work already on an Arrangement and now want to change the whole arrangement globaly.  Here is how I would do it:
    1 - Make sure your midi notes are all quantised and of uniform length whatever their note values. ( This applies especially  if you have played the notes in in real time from a keyboard which is likely that they will be uneven - so quantize the lot before doing this. If you have 'written' or dragged the notes in Step Time then it is not so critical)
    2 - Select all the regions and then grab the Right hand end while holding down OPTION and SHIFT - you will be able to drag all the regions to the same uniform length.
    3 -  Calculate the entire length of the regions you have already written and round them off to a set number of bars. Let's say for example the regions extend from bar 1 - to bar 16. You are going to reduce the regions to exactly half their length by OPTION dragging the regions smaller. That way you will get quarter notes halving to 8th notes. ( If it was the other way round you would OPTION drag the regions larger the other way)
    Hope that helps
    Best
    MS

  • How can i change the length of a line like-particle in Particle World settings?

    I made a Particle World with the Line type of particles, but i want to change the individual length of the particles (the lines) is this possible somehow?
    Thanks in regard. 

    Nope.
    Mylenium

  • My passcode should be 5 digits not 4.  How can I change the length of my iPhone passcode?

    My company requires the passcode on my iPhone to be at least 5 digits to be in compliance with their Enterprise policy.  Can I do that?

    Yes. Settings - General - Passcode Lock - (enter current passcode) - turn Simple Passcode OFF. Then enter new code.
    Matt

  • How can I adjust the length of a note? Please help.

    How can I adjust the length (the sustain time) of a note after I have selected the note? Many thanks.

    Just drag the right end back and forth (mouse over the end of the note - a ] appears) - by holding down ctrlshiftdragging you can change the subdivision into ticks. In the Midi event editor you can do it numerically - just change the numbers displayed in the length section.

  • How do I change the length of multiple photo's after I've added them?

    How do I change the length of multiple photo's after I've added them?

    Hey,
    The best way to do this is to select all the clips by holding down the shift key or command key if the clips you want to change are not all right next to each other and then selecting each clip that you want to change. Then double-click on the clips which will open up the inspector tab and then you can change the duration. If you want to just change all clips to the same duration just double-click on one of the photos and in the inspector tab next to the durationt tab you will see a box that says "add duration to all clips". If you click that, when you change the duration all the photos will change to that duration. That will then change the duration of all the clips at the same time.

  • How can I change the tempo (and the snap grid) of the project without altering the duration of the original audio clips?

    This question is for Logic Express.
    I have many very short audio clips that I recorded into my project.
    I want to adjust the project tempo so that I can use the snap grid to make a beat out of my short audio clips. But when I change the project tempo, it automatically adjusts the lengths of my audio clips.
    So how can I change the tempo (and the snap grid) of the project without altering the original audio clips?

    The reason some files sound funny and others don't is because audio is handled a few different in Garageband depending on it's source (audio your recorded vs Apple Loops vs non Apple Loop pre recorded audio). Each of these have different color regions with different properties.  I just found this thread that might better explain it:
    http://hintsforums.macworld.com/archive/index.php/t-67538.html
    I hope that helps!

  • How can I change the display of Inbox in my iPad's mail app- so that it takes up the full screen?

    How can I change the display of Inbox in my iPad's mail app- so that it takes up the whole screen, as opposed to just about one third; the other two thirds display the full text of the selected email?

    You can't change the display in the Mail app, if you are holding the iPad in landscape orientation then the left-hand third will be for navigation, and the right-hand two-thirds will be an email. If you hold the iPad in portrait orientation then the navigation section becomes a drop-down section.

  • How can I change the background of a running webpage on my own. Example Facebook I want to change its backround color from white to black just in my view not for all

    How can I change the background of a running webpage on my own. Example Facebook I want to change its background color from white to black just in my view, not for all. Cause I really hate some site with white background because as I read for an hour it aches my eyes but not on those with darker background color.

    You can use the NoSquint extension to set font sizes (text/page zoom) and text colors on web pages.
    *NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

  • HT201361 Is it possible to save the screenshot files to a different folder than desktop. How can I change the folder?

    Is it possible to save the screenshot files to a different folder than desktop (that is the default). How can I change the destination folder? Thank you, Sal

    To change the screenshot capture location to a new place on your Mac, first think of a location that would serve you properly. We like to place ours in a "Screenshot" folder located inside of the User's "Pictures" folder. To change the location to this new location, open the Terminal and enter the following command:
    defaults write com.apple.screencapture location /Users/[u]/Pictures/Screenshots/
    Replace "[u]" with the name of the user on your system. Once you have entered this command, let's restart the screen capture utility by restarting the SystemUIServer by entering the following command:
    killall SystemUIServer
    You can optionally log out and back in instead of entering this second command, thus restarting the SystemUIServer. Once restarted, all screen captures taken from here on out will end up in your /Pictures/Screenshots/ folder in the User's home folder on your Mac.

  • How can I change the default apple ID for app store. I bought the macbook from my school when I left and I'm the ID in place of mine is the computer departments one. How can i change it to mine?? Thanks

    How can I change the default apple ID for app store. I bought the macbook from my school when I left and I'm the ID in place of mine is the computer departments one. How can i change it to mine?? Thanks

    http://support.apple.com/kb/ht5621

  • When my husband and I first bought our iPhones, I was the only one with an Apple ID (since he never used iTunes). He used my apple id to get apps. Now he has his own ID, but my account keeps popping up on his phone. How can we change the ID on his phone?

    When my husband and I first bought our iPhones, I was the only one with an Apple ID (since he never used iTunes). He used my apple id to get apps. Now he has his own ID, but my apple ID email address keeps popping up on his phone when he tries to download an app. We do not want to have all of the same apps on our phones. How can we change the ID on his phone? I already tried going to Settings>iTunes &App Store> and changing the Apple ID to his account email and that did not solve the problem. To make things worse, I recently changed my Apple ID email address (without getting a new ID) and I do not remember my old password (and this is the address that is popping up on his phone). He does not have any music on his phone and all of the Apps that he has are free.  Any help you could offer would be great (-:

    All apps are forever tied to the Apple ID that bought them. To stop your id from popping up, you need to delete the apps on his phone, and then repurchase them under his account.

  • I have both Photoshop 4 and Photoshop 6 on my computer. When I am in Bridge and want to open an image by double clicking, it automatically opens in 6. I see, when I go to "open with" 6 is listed as "default" How can I change the "double click" defult to o

    I have both Photoshop 4 and Photoshop 6 on my computer. When I am in Bridge and want to open an image by double clicking, it automatically opens in 6. I see, when I go to "open with" 6 is listed as "default" How can I change the default to open an image with a double click in 4?

    You can associate files from the Bridge level and the Desktop level.
    In Bridge CS4, go to Preferences > File Type Associations and change it to Photoshop CS4 for the file types you want.
    If you want to open files from the Windows Desktop in CS4, these are the instructions:
    Do this from the Windows Desktop:
    If you want your image file to open in Photoshop and it doesn't, right click on it and choose
    Open with > Choose default program… select Photoshop CS4 or CS6 and checkmark "always use the selected program to open this type of file".

Maybe you are looking for

  • Mini dv port not working

    When the mini dv port stops working, is there anything software wise that might resurrect it?  This is on a refurb (from Apple) 2008 MBP, and the port was never actually used for anything until this past week, and it is not working.  Could it be soft

  • Volume issue with new 30G IPOD and Dock while playing through a stereo.

    Sorry if this has been discussed before, I recently purchased a 30G Video IPOD and Dock. While playing through my Stereo I notice that 1) I have to turn up the volume on the IPOD to more than 50% and volume on the receiver to over 50% also and 2) the

  • Automatic update on references

    Hi, I have a reference on a cluster. This reference is use to restore parameters in a files. I use it with a property node. When I do modification in the cluster (that is strict type def) the reference doen't update, so my application doesn't compile

  • Nokia c7 pr 1.2 hard reset

    Greetings all. My C7 has been giving me alot of problems so I am planning on installing pr 1.2 via ovi suite and doing a hard reset. *#7370# hasn't worked so this is whats left. Does anyone know if this will delete Maps, Social and Store and the Qt s

  • Help for the end users

    (This isn't really a technical question, so apologies if I've posted this in the wrong forum.) I have been using Java Web Start for some time to distribute some of my software. I appreciate not having to create separate installers for each OS, and th