How can I change the location of the message filestore?

The MQ default message store is located at /var/imq/instances/brokerName/filestore/ on Solaris. Is there a way that we can change this location? Thanks.

You may set the environment variable IMQ_VARHOME to point to a different location. For detailed explanation, please go to the following page.
http://docs.sun.com/source/816645310/preface.html#17801

Similar Messages

How can I change the message for ( Find My I phone )

How can I change the message on ( Find my I phone )

I'm not sure if you can change the meesage but try here.

How can I change the MESSAGE STYLE for messages?

My customer complains about the big "X", as well as he thinks it's an error instead of a just message or note.
so my question is how do i change the message style then?

You only get that when you have two or more consecutive messages. Try to avoid that is one option.
You can change the icon if you want. Create another icon, call it stop.ico and put it in the icons directory (as indicated by UI_ICON). However, if you have a STOP alert, the icon changes for that alert too.
Note: this is for Developer 6i. In 9i you cannot use ico files. Use gif files instead and put the image in the image jar file (found in OH/forms90/java directory). Since you see a big X, I believe you are using 6i.

How can we change the message type?

Hello all
We use SRM server 5.5 with classic scenario.
When we create shopping cart, we implemented the Change Badi to assign the purchasing group from R/3 material master.
We implemented the following logic.
If material master in R/3 has no purch. Group, SRM also has no purch. Group. So SRM display the error message You should select the purch. group to determine the purchasing group in basic view.
But, We have the standard error message, when we choose the material code this material code has no purch. Group in R/3 No purchasing groups were found.
Message number is BBP_ATTR050.
Because of this message, we can not progress the process to create shopping cart.
Can we change the message type from Error to Warning Message?
Or, Can we delete this message?
Thank you,
Best regards,
SH

Yes. You are right.
When user choose the material code, there is no purch. group in 1st Step, but
we want to choose the purch. group in 2nd Step on basic view.
But we have the error message at 1st step. so we can not progress to 2nd Step.
If we use dummy purch. group, user could make the human mistake.
So our customer want to remove purch. group and choose the purchasing group by user.
But i'm not sure if we remove this error message, we got solve this problem..
Pls give me an idea..
Message was edited by:
So Hee Lee

How can I change the message for an error and then cancel it

Hi everyone.
I am currently developing an application where I have to use a trigger (DAQmx). Now it can happen, that the user (who will operate the device later on) can activate the trigger without a valid source. After a timeout, he will get a quite strange message stating he either might want to wait longer (Error -200284 occurred at DAQmx Read). I would like to redefine this error.
So if this error number appears, he should get a message saying: "Your request couldn't be executed, since no valid trigger signal was found".
How would I do this .. Thanks for help

Hi Somnatic
There are different ways. As you describe it, you'd like to cancel the occuring error (-200284) and show another message. I attach a vi with a view ways.
Hope this helps.
Thomas
Using LV8.0
Don't be afraid to rate a good answer...
Attachments:
ClearError.vi ‏80 KB

How can i change the message display back to full screen from half pane

after a recent update the message is displayed in the bottom half of the screen. i want to change it back to where the message only opens after double clicking to open it but the options or tools buttons arent there to do this.

Press F8 to turn the message pane off.

How can i change the message centre no. On my iphone?? And to help u guys "50057672" trick doesnt work and shows an Unknown Error. Please help!!!

This doesnt work on my phone
"To check the currect msg centre no. type
#50057672# then press calling btn.
To set a new MSG centre number:
1. Call to your service provider and get the msgcentrenumber.
2. Type 5005*7672msgcentrenumber# press calling btn.
3. rember the # sign after your new msg centre no."
Help me changing or atleast checking my msg centre number.
My phone is not sending messages.

Read the manual.
The basics are restart, reset, restore.
iPhone User Guide (For iOS 4.2 and 4.3 Software)

How can I change the install location when installing an App (i.e. Lightroom) from Creative Cloud?

How can I change the install location when installing an App (i.e. Lightroom) from Creative Cloud?

Rolfjuelg I am sorry but Lightroom does not support custom installation locations through the Creative Cloud. You can find more details at Lightroom and Creative Cloud FAQ.

How can I change the location for the backup from iphone to itunes?

How can I change the location for the backup from iphone to itunes? I want to backup to my external harddisk and not the computer itself. How do I do it?

Moving the iOS device backup location
Open a command prompt by hitting the start button and typing CMD<Enter> in the search box that opens up, or with Start > Run on older Windows.
To move the current backup folder from C: to D: (for example) type in this command and press <Enter>
Move "C:\Users\<User>\AppData\Local\Apple Computer\MobileSync\Backup" "D:\Backup"
Where <User> is your Windows user name.
To make iTunes look for the data in the new location type in this command and press <Enter>
MkLink /J "C:\Users\<User>\AppData\Local\Apple Computer\MobileSync\Backup" "D:\Backup"
If your preferred drive has a different letter or you already have a folder called "Backup" then edit "D:\Backup" accordingly in both commands.
If you have Windows XP then you'll need a third-party tool such as Junction to link the two locations together instead of the MkLink command. The source folder is C:\Documents and Settings\<User>\Application Data\Apple Computer\MobileSync\Backup
tt2

How can I change the location name my iPhone pulls up when I am home. The info that pulls is not correct?

How can I change the location name my iPhone pulls up when I am home. The info that pulls is not correct?

If the size of the iPhone backup is putting you over the edge you have bigger problems than just this backup. You really need to solve the fundamental problem of your C: partition being too small. Even if you could solve the iPhone problem something else will come up soon that will again challenge your disk space. New drives can be had for well under $100, and even a 500 GB drive is only a little more than $100. This would be a good time to upgrade. You can even clone your current drive AND increase the partition size in one step with disk imaging software such as Acronis True Image.

How can I change the ipad2 backup location

How can I change the local computer backup location for an iPad2 (iOS 5.0.1) to a folder I designate so it doesn't go through a specific user account (i.e.- If I create a folder directly on c: then point the backup there)?

This previous discussion may be of interest: how do i change the file location of a backup on my computer

How can I change the default location of files?

I have just changed the location of "My documents" in Windows to point to a separate drive (in fact "e:\mydocs"). Now Flex Builder 3 can't see my projects. If I import them it wants to copy them back to "c:\documents and settings\administrator\Flex Builder 3". So I have 2 questions - firstly is it possible to alter something so that it sees my projects in the right place automatically. Secondly how can I change the default location?
Thanks

sorry folks, just found the answer - File-Switch Workspace

HT201361 Is it possible to save the screenshot files to a different folder than desktop. How can I change the folder?

Is it possible to save the screenshot files to a different folder than desktop (that is the default). How can I change the destination folder? Thank you, Sal

To change the screenshot capture location to a new place on your Mac, first think of a location that would serve you properly. We like to place ours in a "Screenshot" folder located inside of the User's "Pictures" folder. To change the location to this new location, open the Terminal and enter the following command:
defaults write com.apple.screencapture location /Users/[u]/Pictures/Screenshots/
Replace "[u]" with the name of the user on your system. Once you have entered this command, let's restart the screen capture utility by restarting the SystemUIServer by entering the following command:
killall SystemUIServer
You can optionally log out and back in instead of entering this second command, thus restarting the SystemUIServer. Once restarted, all screen captures taken from here on out will end up in your /Pictures/Screenshots/ folder in the User's home folder on your Mac.

How can I change the background color in the inbox?

The background color in my inbox (well, all mailboxes) is white. A yellow background would make the existing black text a lot easier to read. How can I change the background color in the inbox?

Themes work in Thunderbird - duggabe was not refering to Firefox.
Another useful addon is theme and font changer:
* https://addons.mozilla.org/fr/thunderbird/addon/theme-font-size-changer/
However, Thunderbird allows you to modify all sorts of things.
Make hidden files and folders visible:
* http://kb.mozillazine.org/Show_hidden_files_and_folders
Help > Troubleshooting Information
Click on 'show Folder' button
a window opens shwoing profile folder name
Close Thunderbird now - this is important
In the profile name folder, Create a new folder called '''chrome''' - note the spelling
It should be in the same place as the 'Mail' folder.
see first image below.
Open Notepad
Can be located : Start > Programs > accessories
Copy everything shown between the lines below.
Paste into Notepad.
Save as '''userChrome.css''' - note the spelling (edit updated - this was a typo error)
This should be saved in the '''chrome''' folder.
see second image below.
Restart Thunderbird.
I have chosen a yellow for you
<pre>
#f6f58c = a yellow....it is a hex code for a colour.
</pre>
You can change it if required. Remember when updating anything in the profile folders, you must close Thunderbird first.
More info on colours.
* http://www.yourhtmlsource.com/stylesheets/namedcolours.html
<pre>
* Do not remove the @namespace line -- it's required for correct functioning
@namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul");
/*Background colour for message list*/
#threadTree > treechildren::-moz-tree-row {
background-color: #f6f58c !important;
</pre>
-------------------------------------------

How can I change the hotkey assignments for options listed in the context-click (right-click) menu?

How can I change the letter assignments designated to the options that appear in the right-click drop-down menu?
I frequently save specific items and inspect elements in webpages, however currently the key assignment for 'View Page Info' is the letter ' i ', which inconveniently is located out of the reach of my left hand.
Rather than forcing ambidextrous mouse usage to allow my right-hand to rest on the keyboard, if I could be pointed in the right direction for customizing these assignments I would greatly appreciate it. I have been able to disable some of the menu items I don't use with firebug but didn't see/didn't know how to go about customizing this option in about:config or deeper in the program files.
Thanks ahead of time, I'm sure this will be a quick and hopefully easy file/preference name assignment I just need to add, I just couldn't find any forums that had already addressed the request.

While that add-on is pretty useful and handy for customizing the keyboard shortcuts for items housed in the Menu Bar, it does not provide the resource to change the key combinations assigned to items in the context-click menu
(the one that appears when you right-click a HTML element or image or such with specific actions pertaining to the item you clicked on - See image)
https://support.cdn.mozilla.net/media/uploads/images/2014-12-14-13-13-50-85097a.png

How can I change the language to ODI

Hi
I installed ODI in windows XP, the language of the S.O. and the Oracle Database is Spanish, then ODI is showed in spanish.
I need ODI in english.
How can I change the language?.
Thanks
Edwin

Hi Edwin,
1. Close all your ODI window.
2. Take a backup of your existing odiparams.bat/sh file ( it is located at <ODI_HOME>\oracledi\bin )
3. Set the following line
set ODI_ADDITIONAL_JAVA_OPTIONS="-Duser.language=en -Duser.country=us"
4. Save it.
5. Run the file.
Open ODI window , it should display in English .
Thanks,
Sutirtha

How can I change the location of the message filestore?

Similar Messages

Maybe you are looking for