How can I change the position the MoveAbsolute method moves a motor toward?

I'm just starting LabView and still am stuck on motor control methods. How do I set the angle or position to which the motor will move (or turn in the case of MoveAbsoluteRot), and can I set the velocity getting there? All help is appreciated.
Solved!
Go to Solution.

Duplicate: http://forums.ni.com/t5/LabVIEW/What-are-the-parameters-and-outputs-of-the-activex-methods/m-p/29003...
Please stop creating duplicate threads with the same question. As I mentioned in your original post, the place to get full information on third party software is from the provider of that software. You really don't have a LabVIEW problem as much as a problem understanding the third party api and outs documentation.

Similar Messages

ITunes 11 - how can I change the genre of a movie now?

So I've had iTunes 11 for about 3 hours now and so far it *****. One of my main problems is I can't find how I can change the genre of a movie anymore. I used to do this from Get Info so I could organise all my movies in to my own genres that make sense to me which helps me find what I want to watch when using Apple TV.
It will still let me do that for movies I bought before I "upgraded" to 11 but for the movies I bought this evening, after upgrading, the genre drop down is locked down.
Am I just looking in the wrong place? Or have Apple somehow got the idea that pointlessly preventing your customers from organising their content in their own way is somehow an improvement and I'm stuck with their nonsensical genre classifications?
Same thing goes for movie titles now I think of it - I've edited movie titles after purchase (e.g. I've put HP1 in front of the title of Harry Potter and the Philosopher's Stone and HP2 in front of Chamber of Secrets) so that series list in watching order, rather than alphabetical order, on my Apple TV. It's not letting me do that from Get Info either
Please someone tell me I'm just doing it wrong - I don't think I've the patience to jump through the hoops necessary to get 10.7 back!

I had the same bug in songs. It was directly related to tracks purchased in the iTunes store, they wouldn't allow any changes, it was all grayed out.
Here's how I got around it. When I selected more than one item and any other item was not from the iTunes store it would allow me to Get Info and change everything with no problems.
My suggestion is that if you need to, add in a movie from your hard drive (anything at all, it will be a dummy placeholder) that you can you use to select along with the one you need to change. Use command click to select non-contiguous files (even works in different genres), then get info (or command i) and then change your info. You can keep using the same dummy file for as long as you need to to fix the files with incorrect info, then delete it when done.

How can I change the language of a movie I am watching on my Netflix app on the iPad

I am watching a movie on my iPad via the Netflix app and the movie is in Spanish, I would like it to be in English but I can't find a way to fix the problem, please help.

But in the Netflix app is a place where you can watch unlimited movies and tv shows for only around 8 dollars a month.
so what i need help in is how to change the language of the movie that i am watching, in the app there in no menu or any way to rent, buy, or download moveis, (atleast non that i am aware of)
So if i am watching a movie and it is being played in spanish, i would like to know how i acn change the language of the movie.

When using just Apple TV, how can I change the Genre of a movie?

It's using iCloud and some of the movie genre's make no sense. For example, Elvira: Mistress of the Dark is listed as Horror, but Elvira's Haunted Hills is showing as Comedy.
I do realize that Elvira Movies are generally listed as Comedy/Horror on IMDB, and that's fine. However I'd prefer to have these movies listed together properly when looking at movies by Genre.
Additionally, The Lost Boys is listed as a Comedy where as it really should be a horror film. It's humor is secondary after all.
Is there a way for me to change, individually, my movies genre? I don't care if it affects anyone else or not, it just doesn't help me to have them so disjointed. This is only using Apple TV and the movies that stream directly from iTunes central database, not anything located on my personal devices (I can change those just fine locally and they will show up correctly if I just look at it via a computer connection.

I had the same bug in songs. It was directly related to tracks purchased in the iTunes store, they wouldn't allow any changes, it was all grayed out.
Here's how I got around it. When I selected more than one item and any other item was not from the iTunes store it would allow me to Get Info and change everything with no problems.
My suggestion is that if you need to, add in a movie from your hard drive (anything at all, it will be a dummy placeholder) that you can you use to select along with the one you need to change. Use command click to select non-contiguous files (even works in different genres), then get info (or command i) and then change your info. You can keep using the same dummy file for as long as you need to to fix the files with incorrect info, then delete it when done.

How can I change the Genre of multiple movies at one time?

I have a ton of movies on my server as I have a Macbook Air with very little HD space. I want to change the Genre for them but would rather not do it one ata a time. Any Ideas? Is it possible to do multiples?

I have a ton of movies on my server as I have a Macbook Air with very little HD space. I want to change the Genre for them but would rather not do it one ata a time. Any Ideas? Is it possible to do multiples?

How can I change the date of a movie clip?

I just digitized some Video8 analog tapes into iMovie and iMovie filed them under 2012 category (since analog tapes have no metadata I suppose). Is there any way to assign the correct year (i.e. 1998) to the clips so they will be filed under the correct year?

Hi Karsten
Me just adding in - tried this date and time change and as I get it
• iMovie'08 - can't be done - Right-Click or Shift-Click or whatever-Click - just don't work
• iMovie'09 (and most probably iM'11) - Exactly as describet - BUT one must ctrl-Click on one CLIP at a time - Can't be done to a full Event in one stroke (at least I can not figure out how)
(Now I did figure it out - Select Clip one - keep Shift-key down and select last clip in Event - then when all is selected ctrl-Click in one of them and Change Date & Time and all will change)
Yours Bengt W

How can i change the date of imported movie clips from mini dv?

i imported 1 hour of video from the same tape and created 1 event for all of them.but the date of it is today so imovie is showing it under 2011 when it is 2008? i tried the terminal command touch -t 200806061200 and then draging the event from movies-imovie events to the terminal, i also tried the touch -mt but its not working The folder itself changed dates but not all the clips inside it?

Hi Karsten
Me just adding in - tried this date and time change and as I get it
• iMovie'08 - can't be done - Right-Click or Shift-Click or whatever-Click - just don't work
• iMovie'09 (and most probably iM'11) - Exactly as describet - BUT one must ctrl-Click on one CLIP at a time - Can't be done to a full Event in one stroke (at least I can not figure out how)
(Now I did figure it out - Select Clip one - keep Shift-key down and select last clip in Event - then when all is selected ctrl-Click in one of them and Change Date & Time and all will change)
Yours Bengt W

How can I change the location of my movie folder

Hello, I just consolidated two mac computers into one mac mini. Now both my wife and I want to share the same actual computer (new mac mini) and share media folders so we are not duplicating photo imports and movies. I figured out how to map the iTunes library and the iPhoto library to a shared folder, but cannot get how to map the 'movie' folder to a single folder for both accounts. This would be needed so we can share and work on the same iMovie projects between the two accounts. Does anyone have any suggestions?

You might get better answers by asking this in the iMovie Discussion group

How can i change the position and size of the applet

dear fellows,
how can i change the position and size of the applet in which form is running over the web.
thanx
Mochoo

Yes, you can add the following line to your formsweb.cfg section :
HTMLbodyAttrs=onLoad='javascript:self.moveTo(100,100)'
if you are in SEPERATEFRAME = FALSE
Or Set_Window_Property( FORMS_MDI_WINDOW, POSITION, X, Y ) ;
if you are in SEPERATEFRAME = TRUE

How can I change the frame rate mode?

Adobe Premiere Pro exports my videos with a variable frame rate. Because of this long videos are asynchronous. How can i change the frame rate mode? So Adobe Premie Pro exports my videos with a CONSTANT frame rate? The original video has a constant frame rate...

Sorry my mistakes. I am from Germany.. so...I mean with asynchronous that the video file and the sound file are displaced. In the beginning of the Video it's normal, but if the videos is very long it goes VERY "asynchronous"
I analyzed the video with "mediainfo":
General
Format                                   : MPEG-4
Format profile                           : Base Media / Version 2
Codec ID                                 : mp42
File size                                : 2.00 GiB
Duration                                 : 20mn 13s
Overall bit rate mode                    : Variable
Overall bit rate                         : 14.2 Mbps
Encoded date                             : UTC 2013-12-11 13:56:13
Tagged date                              : UTC 2013-12-11 13:58:30
©TIM                                     : 00:00:00:00
©TSC                                     : 30
©TSZ                                     : 1
Video
ID                                       : 1
Format                                   : AVC
Format/Info                              : Advanced Video Codec
Format profile                           : [email protected]
Format settings, CABAC                   : Yes
Format settings, ReFrames                : 3 frames
Format settings, GOP                     : M=3, N=30
Codec ID                                 : avc1
Codec ID/Info                            : Advanced Video Coding
Duration                                 : 20mn 13s
Source duration                          : 20mn 13s
Bit rate                                 : 14.0 Mbps
Width                                    : 2 560 pixels
Height                                   : 1 440 pixels
Display aspect ratio                     : 16:9
Frame rate mode                          : Variable
Frame rate                               : 30.000 fps
Minimum frame rate                       : 30.000 fps
Maximum frame rate                       : 30.030 fps
Standard                                 : PAL
Color space                              : YUV
Chroma subsampling                       : 4:2:0
Bit depth                                : 8 bits
Scan type                                : Progressive
Bits/(Pixel*Frame)                       : 0.127
Stream size                              : 1.98 GiB (99%)
Source stream size                       : 1.98 GiB (99%)
Language                                 : English
Encoded date                             : UTC 2013-12-11 13:56:13
Tagged date                              : UTC 2013-12-11 13:56:13
Color primaries                          : BT.709
Transfer characteristics                 : BT.709
Matrix coefficients                      : BT.709
mdhd_Duration                            : 1213733
Audio
ID                                       : 2
Format                                   : AAC
Format/Info                              : Advanced Audio Codec
Format profile                           : LC
Codec ID                                 : 40
Duration                                 : 20mn 13s
Source duration                          : 20mn 13s
Bit rate mode                            : Variable
Bit rate                                 : 158 Kbps
Maximum bit rate                         : 254 Kbps
Channel(s)                               : 2 channels
Channel positions                        : Front: L R
Sampling rate                            : 44.1 KHz
Compression mode                         : Lossy
Stream size                              : 22.8 MiB (1%)
Source stream size                       : 22.8 MiB (1%)
Language                                 : English
Encoded date                             : UTC 2013-12-11 13:56:13
Tagged date                              : UTC 2013-12-11 13:56:13
mdhd_Duration                            : 1213777
And there i can read that the "frame rate mode" is variable... and that's the bad thing... I want to change that point to a constant frame rate mode. I use the H.264 codec

How can i change the settings of play/pause in Elements 13?

Hello!
How can i change the settings of play/pause in Elements 13? I definitely need cursor back to the "start play" point each time i hit stop (spacebar), like it works in Sony Vegas or in most of audio editing software. Can somebody help?
Thanks!

invasion 21
The following is a copy of the reply that I posted to your question earlier today in the Adobe Premiere Pro Forum
invasion21
You are in the Adobe Premiere Pro Forum. What is your program? Is that Premiere Elements 13? If so, you are in the wrong forum where
Premiere Pro answers may not be appropriate for your Premiere Elements (any version) question.
You are not going to find what you are looking for in Premiere Elements preference settings.
You write
I WANT it playhead jump back to start play position, when i hit spacebar for pause.
You can maneuver yourself into that through Edit Menu/Keyboard Customization/Applications/ and its Help category which by
default shows
Go to Timeline/Clip Start, using Home
and
Play/Pause Toggle, using Space
But, you may find it is best to leave well enough alone. Explore and experiment with changing the keyboard shortcuts for the commands and decide what works for you.
ATR

How can i change the particular node color in Jtree?

I have constructed the tree.i dont know how to set the color for the particular node then how can i change the particular node icon depends on some conditions like if we will give the input whether it is available in jtree that node icon only changed.Anyone please help me as soon as possible.

hi,
i saw that tutorial.from that book i dont get the particular node cell renderer.i got a cell renderer for tree only.i attached my code in this mail.pls see and help me if u will do
mport pack.Prop;
import java.awt.BorderLayout;
import java.awt.Color;
import java.awt.Component;
import java.awt.Container;
import java.awt.Font;
import java.io.BufferedReader;
import java.io.File;
import java.io.FileInputStream;
import java.io.IOException;
import java.io.InputStreamReader;
import java.util.Properties;
import java.util.Set;
import java.util.StringTokenizer;
import java.util.Vector;
import javax.swing.Icon;
import javax.swing.ImageIcon;
import javax.swing.JFrame;
import javax.swing.JLabel;
import javax.swing.JScrollPane;
import javax.swing.JTree;
import javax.swing.UIManager;
import javax.swing.text.Position;
import javax.swing.tree.DefaultMutableTreeNode;
import javax.swing.tree.DefaultTreeCellRenderer;
import javax.swing.tree.DefaultTreeModel;
import javax.swing.tree.MutableTreeNode;
import javax.swing.tree.TreeCellRenderer;
import javax.swing.tree.TreePath;
public class ReadProperty3 extends JFrame{
String str,key;
static JTree tree;
static Vector v;
StringTokenizer st;
static DefaultMutableTreeNode root;
DefaultMutableTreeNode t;
public Object[] o;
public static void main(String[] args) throws IOException {
ReadProperty3 r = new ReadProperty3();
Prop p=new Prop();
JFrame f=new JFrame();
p.show();
Object[] o=v.toArray();
int startRow = 0;
String prefix =p.s;
TreePath path = tree.getNextMatch(prefix, startRow, Position.Bias.Forward);
//if(prefix.equals(root.getChildAt(0).toString()))
if(prefix.equals("2000"))
     System.out.println("Node 2000 found");
     else if(prefix.equals("3000"))
          System.out.println("Node 3000 found");
     else if(prefix.equals("4000"))
          System.out.println("Node 4000 found");
     else
          System.out.println("Node not found");
     for(int i=0;i<v.size();i++)
          //((DefaultTreeModel)tree.getModel()).reload();
          DefaultTreeCellRenderer ren=(DefaultTreeCellRenderer)tree.getCellRenderer();
          Icon openIcon = new ImageIcon("C:/apache-tomcat-5.5.12/webapps/jsp-examples/images/execute.gif");
          Icon closedIcon = new ImageIcon("C:/apache-tomcat-5.5.12/webapps/jsp-examples/images/execute.gif");
          Icon leafIcon = new ImageIcon("C:/apache-tomcat-5.5.12/webapps/jsp-examples/images/read.gif");
          if(o[0].equals(p.s))
               ren.setBackgroundSelectionColor(Color.MAGENTA);
               ren.setBackgroundNonSelectionColor(Color.YELLOW);
               //ren.setTextSelectionColor(Color.YELLOW);
               //ren.setTextNonSelectionColor(Color.BLUE);
               ren.setClosedIcon(closedIcon);
               ren.setFont(new Font("Impact",Font.ITALIC,14));
          else if(o[1].equals(p.s))
               ren.setLeafIcon(leafIcon);
               ren.setFont(new Font("Impact",Font.ITALIC,10));
               UIManager.put("Tree.leafIcon", leafIcon);
          else if(o[2].equals(p.s))
               ren.setOpenIcon(openIcon);
               ren.setFont(new Font("Dialog",Font.BOLD,9));
public ReadProperty3(){
     super("JTree With Properties");
     try{
int c = 0;
while(c == 0){
c = 1;
BufferedReader bf = new BufferedReader(new InputStreamReader(System.in));
System.out.print("Enter file name which has properties extension :");
str = bf.readLine();
File f = new File(str + ".properties");
if(f.exists()){
Properties pro = new Properties();
FileInputStream in = new FileInputStream(f);
pro.load(in);
System.out.println("Key: " + pro.keySet());
System.out.print("Enter Key : ");
key = bf.readLine();
String p = pro.getProperty(key);
st = new StringTokenizer(p,"=,");
root=new DefaultMutableTreeNode(key);
v=new Vector();
while(st.hasMoreTokens())
     String val=st.nextToken();
     v.add(val);
     o=v.toArray();
     System.out.println(val);
     t=new DefaultMutableTreeNode(val);
     root.add(t);
     tree=new JTree(root);
     tree.setEditable(true);
     JScrollPane jp=new JScrollPane(tree);
     // tree.setCellRenderer(new CellRenderer());
     Container content=getContentPane();
     content.add(jp,BorderLayout.CENTER);
setSize(250,275);
setVisible(true);
addWindowListener(new ExitListener());
else{
c = 0;
System.out.println("File not found!");
catch(IOException e){
System.out.println(e.getMessage());
}

How can I change the display of Inbox in my iPad's mail app- so that it takes up the full screen?

How can I change the display of Inbox in my iPad's mail app- so that it takes up the whole screen, as opposed to just about one third; the other two thirds display the full text of the selected email?

You can't change the display in the Mail app, if you are holding the iPad in landscape orientation then the left-hand third will be for navigation, and the right-hand two-thirds will be an email. If you hold the iPad in portrait orientation then the navigation section becomes a drop-down section.

How can I change the background of a running webpage on my own. Example Facebook I want to change its backround color from white to black just in my view not for all

How can I change the background of a running webpage on my own. Example Facebook I want to change its background color from white to black just in my view, not for all. Cause I really hate some site with white background because as I read for an hour it aches my eyes but not on those with darker background color.

You can use the NoSquint extension to set font sizes (text/page zoom) and text colors on web pages.
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

HT201361 Is it possible to save the screenshot files to a different folder than desktop. How can I change the folder?

Is it possible to save the screenshot files to a different folder than desktop (that is the default). How can I change the destination folder? Thank you, Sal

To change the screenshot capture location to a new place on your Mac, first think of a location that would serve you properly. We like to place ours in a "Screenshot" folder located inside of the User's "Pictures" folder. To change the location to this new location, open the Terminal and enter the following command:
defaults write com.apple.screencapture location /Users/[u]/Pictures/Screenshots/
Replace "[u]" with the name of the user on your system. Once you have entered this command, let's restart the screen capture utility by restarting the SystemUIServer by entering the following command:
killall SystemUIServer
You can optionally log out and back in instead of entering this second command, thus restarting the SystemUIServer. Once restarted, all screen captures taken from here on out will end up in your /Pictures/Screenshots/ folder in the User's home folder on your Mac.

How can I change the position the MoveAbsolu​te method moves a motor toward?

Similar Messages

Maybe you are looking for

How can I change the position the MoveAbsolute method moves a motor toward?