How can I change the real server convergence timer in LD ?

I have LD416(3.1.4) and configured 1*VIP and 2*Real server. looks it takes about 30 seconds to switching to the other real server when one of failure.
Q) How can I reduce the the convergence time?
Thanks,

I am not sure , but check with by configure the DELAY command and see if that helps resolve this.For related information on timers, could you refer the below URL :
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/products_configuration_guide_chapter09186a00800ca75d.html

Similar Messages

  • How can we change the item cost at time of Inventory Transfer, thru SDK?

    Hi All,
    How can we change the item cost at time of Inventory Transfer, thru SDK?
    My client wants some items to be transferred from A warehouse to B warehouse. When they transfer , they have to pay some octroi charges. This octroi charges they want to include in item cost at time of Inventory Transfer.
    How do we give this additional cost effect in item cost at the time of Inventory transfer? Please help .
    regrds,
    Binita

    Binita,
    This question was posted earlier and was replied.  If you want to do this through SDK please post the question to the SDK Forum.
    Which ever route you take (SDK or manual within the system), you still have to follow the process steps involved.
    Step 1: Transfer the goods
    Step 2: Revaluate the Goods on WH B to reflect Octroi
    Suda

  • How can i change the data from one Time Capsule to another?

    How can i change the data from one Time Capsule to another?

    Do you mean copy it?  If so, see #18 in Time Machine - Frequently Asked Questions  You'll need section 2 there.
    If you mean something else, please clarify.

  • Facetime is using my husband's cell phone number instead of mine? How can I change the number in face time?

    Facetime is using my husband's cell phone number instead of mine. How can I change the number to mine in face time?

    You need to set up the accounts in System Preferences/Accounts, then activate Fast User Switching.
    That way you can quickly log in to your own account - then back to his.
    You should obviously have different passwords.

  • How can i change the backup intervals on time machine

    how do i change the backup intervals on the timemachine? i found one answer that told me to go into system>library>launchdaemons, but i dont have the file com.apple.backupd-auto.plist in the launchdaemons folder to change the second increments. what am i missing and what can i do to change it like others have?

    Hello Oilfield Dan:
    This will change your TIme Capsule backup intervals:
    sudo defaults write /System/Library/LaunchDaemons/com.apple.backupd-auto StartInterval -int 14400  To every four hours.  My issue is that when I run this it won't change it.. Still does it every hour.. Do you have any thoughts on WHY this will not change... Even with reboots, resets, poweroff.  UNIX should do what you tell it but this is not working. I do not want to use the GUI Time Capsule interval changer. I want to have total control. Does anyone know???? THANK YOU.

  • How can I change the settings in my time capsule to support UPnP?

    Trying to change the settings on my time capsule to support UPnP so I might remotely access 3rd party software.  Any suggestions?

    Apple routers do not support UPnP.  They do support NAT-PMP, but that requires that you manually enter in the port values to set up what is known as Port Mapping.
    But, first things first. is the Time Capsule set up as the DHCP and NAT router for the network, or do you have another router upstream from the Time Capsule on the network?
    Another way to ask the same question......what is the make and model number of the device that you call your "modem"?

  • How can I change the frequency of when Time Machine reminds me to backup?

    I used to get a pop up every ten days telling me that it's been ten days since I backed up Time Machine, but since the last time I backed it up, it's started notifitying me everyday. I'm just wondering if there's a way I can change the frequency, since I usually just back it up every few months and I don't keep my external hardrive hooked up all the time.
    Thanks!

    That's not a particularly wise backup strategy. You should backup at least once per week. Time Machine is designed to backup hourly if left alone. You should have a permanent backup drive that remains connected to the computer at all times except, perhaps, when you are traveling.
    If you disconnect the backup drive then Time Machine will start to save snapshots on your computer until the backup drive is reconnected at which time the snapshots are transferred to your backup drive and erased from the computer's drive.
    You can use a utility such as TimeMachineEditor 3.0.3 to change Time Machine's backup interval.

  • How can I change the tip strip display time?

    I would like to have the tip strip appear for a longer time, or even have it stay as long as the user hovers over the control. Any suggestions? I don't want to use an event structure because that would be major surgery on a legacy application.
    Thanks.
    Matt

    I can't say for sure but I can say that I spent some time looking for that. I would think it is an INI tag if this is even possible. If there is no way to configure tip-strip behaviour then this is something for the idea exchange.
    But it doesn't have to be major surgery. If you can do minor outpatient surgery then something like this could work for you. If not maybe it will help someone else.
    I call this a drop-in vi because you don't modify the application you put it in. It just sits outside of the main loop.
    This is a quick and dirty demo how you can use the caption for a tip-strip. It uses a subvi with an event structure that on mouse over copies the tip-strip text to the caption text. On mouse out it restores the caption.
    The demo has some issues that would need to be resolved in production. The event loop should continue executing and exit based on a user event. Then the loop surrounding the tip-strip vi can be removed. But I wanted to keep this short and sweet.
    Another improvement is to make the text stand out better by changing colors when the tip-strip text is in the caption.
    =====================
    LabVIEW 2012
    Attachments:
    Main vi.vi ‏10 KB
    TipStrip.vi ‏20 KB

  • How can I change the default url each time I open a new tab?

    New tabs used to open up with the same home page I use when I open firefox but now all tabs open up with something different and I can't find where to change that.

    New tabs in Firefox have always been a blank page by default, but there are many different add-ons that can change that action to a specific web page.
    This is probably the simplest add0on to do that, but first you need to figure which add-0n changed it from a blank page and get rid of that add-on. <br />
    https://addons.mozilla.org/en-US/firefox/addon/newtaburl/

  • How can I change the fact that every time I open firefox, I get redirected to a website promising a free ibook?

    OK. So in October I made the mistake of opening a website offering a free iBook (I'm really not gullible; I thought I could figure out who was sending it too me). Ever since then, I cannot open a new Firefox session without being redirected to the site (If I open up more than one webpage and save them before closing, I don't get redirected to the ibook site).
    I actually keep my web-surfing software on thumb drives, and I tried two different thumb drives doesn't matter. I purchased and ran an anti-virus program. No dice. Can you help me?
    I have a MacBook, which runs on system OSX 10.5.8

    Hi revbennyd,
    So it sounds like your home page has been hijacked? You should take a look at the Knowledge Base article [[How to set the home page]].
    There are steps in that article to reset your homepage preferences to default. I would try that first to clear out any strangeness. If that works, you can try setting your homepage again to your personal preference.
    If that doesn't work you should look at the article [[Preferences are not saved]].
    Finally, your issue may be because you've been hit with some [https://support.mozilla.org/en-US/kb/Is%20my%20Firefox%20problem%20a%20result%20of%20malware?s=malware&r=0&e=sph&as=s#w_how-do-i-get-rid-of-malware Malware].
    Hopefully this helps!

  • ICal How can I change the preset quarter-hour time intervals?

    iCal is set to automatically "click" into 15 minute intervals as you drag and drop an event. Is it possible to change this so I can drag an event into 10 minute intervals? I know I can set the time manually, but if I move the event, it reverts to only allowing quarter hour intervals.

    Hello Oilfield Dan:
    This will change your TIme Capsule backup intervals:
    sudo defaults write /System/Library/LaunchDaemons/com.apple.backupd-auto StartInterval -int 14400  To every four hours.  My issue is that when I run this it won't change it.. Still does it every hour.. Do you have any thoughts on WHY this will not change... Even with reboots, resets, poweroff.  UNIX should do what you tell it but this is not working. I do not want to use the GUI Time Capsule interval changer. I want to have total control. Does anyone know???? THANK YOU.

  • How can you change the banner of the FTP-server on the Linksys WRT610N ?

    Dear readers,
    My question is this : How can you change the banner of the FTP-server on the Linksys WRT610N ?
    At present it says : "Welcome to WRT610 Router's FTP service" which gives away the type of the device.
    Which is a clue I would rather hide. Besides that I would like to change it to something more personal.
    But how do you do that ?
    The UG is silent about this.
    Regards
    John

    Try this to change FTP banner?
    * Login as admin
    * Open Internet Information Services (IIS) Manager
    * Expand FTP sites (from tree view)
    * Right-click on the particular FTP site, select Properties
    * Click on the Messages tab
    * Setup new message
    * Save the changes

  • HT201361 Is it possible to save the screenshot files to a different folder than desktop. How can I change the folder?

    Is it possible to save the screenshot files to a different folder than desktop (that is the default). How can I change the destination folder? Thank you, Sal

    To change the screenshot capture location to a new place on your Mac, first think of a location that would serve you properly. We like to place ours in a "Screenshot" folder located inside of the User's "Pictures" folder. To change the location to this new location, open the Terminal and enter the following command:
    defaults write com.apple.screencapture location /Users/[u]/Pictures/Screenshots/
    Replace "[u]" with the name of the user on your system. Once you have entered this command, let's restart the screen capture utility by restarting the SystemUIServer by entering the following command:
    killall SystemUIServer
    You can optionally log out and back in instead of entering this second command, thus restarting the SystemUIServer. Once restarted, all screen captures taken from here on out will end up in your /Pictures/Screenshots/ folder in the User's home folder on your Mac.

  • How can I change the default  driver to OracleXADataSource in JDeveloper

    Hello,
    How can I change the default oracle driver: oracle.jdbc.OracleDriver to oracle.jdbc.xa.client.OracleXADataSource in JDeveloper Studio Edition Version 11.1.1.0.2, Build JDEVADF_MAIN.BOXER_GENERIC_090328.0229.5205.
    If I modify the file connections.xml from jdeveloper\system\system11.1.1.0.31.52.05\o.jdevimpl.rescat2\connections in the sense that I change the driver class, then in JDeveloper when I test my connection I have this problem: Test failed: oracle.jdbc.xa.client.OracleXADataSource cannot be cast to java.sql.Driver
    Why do I need this XA version of the oracle driver? Well I tried, from a book to reproduce the model of an application: entities, stateless and stateful session beans, mdb, web services and a client to test one part of the model.
    And because of the JMS server I need an XA driver.
    I deployed to the integrated wls 10.3 and when I test my client, if I use the default driver for the connection the an error message appears tell me either to emulate two-phase commit or to use XA driver.
    My application works very well, if I configured in the console of the integrated wls 10.3 a datasource with the same name as my ide/application connection that has for the Driver Class Name: oracle.jdbc.xa.client.OracleXADataSource in the Connection Pool tab.
    Thank you.

    Open DIsk Utility and in the toolbar select Disk Image. The file selector will open and you'll have to do three things: 1) just as with any file, name it and point the file selector to where you want it to be saved, 2) near the bottom you'll see name - type iWork 2013 and 3) below that select the image size. Click on size, choose custom and type 1500 MB then click on the Create button.
    Some time will pass and then you'll see an external disk pop up on your desktop and/or the Finder window sidebar. Drag the three programs into it and eject it like any other external disk. Now delete the programs from your applications window.
    Where ever it was you pointed the file selector to you'll see the file you created. Double click on it and the disk image will mount again.

  • How can I change the Tablespace of a Target Schema?

    We have OWB 9.2.0.2.8.
    We have created a target schema “AAA” in a Development server and I have defined the Tablespace “Users” for the data and the Tablespace “Indexes” for the indexes.
    But in the target schema “AAA” in the Production server we have defined the Tablespace “DWH_Data” for the data and the Tablespace “DWH_Index” for the indexes.
    How can I change the default tablespaces for the data and the indexes in the Development server?

    Do you want to do this in the design repository? In there you can do this on the module, as long as you don't do this on the tables.
    You can also update this using scripting, which would be fastest if you need to do this for a lot of stuff...
    Jean-Pierre

Maybe you are looking for

  • How can I get my email from Outlook on the PC to Mac's Mail on Lion?

    I am trying to move years worth of emails from Outlook on a PC to a new MacBook Air. The database of emails is about 5GBs. I can find different settings to export the emails in PC formats, but not a single one listed in the Lion version of Mail. It c

  • Ways to display SSMS data vertically?

    We have several tables with 30+ columns  (imports from an older system). Scrolling horizontally through the data is cumbersome at best. What's the best way in Sql to present the data vertically, like this: This:      col1  col2   col3    col41......

  • Importing two sets of pictures into same collection

    Hi, I have two sets of pictures on 2 different CF cards and would like to import them into the same collection because they belong together. I already imported one set of photos from one CF card into the appropriate collection name. Since there doesn

  • Email Approval Software for mac Mail

    Does anyone know of software to work on the mac platform that creates white/blacklists for email. Trying to reduce spam inside of my mail accounts. Here's are a few windows products: http://www.ascentive.com/products/greenlightguardian/  "It's a perm

  • IPod and computer issues...

    I have returned my 6GB and found out that they don't make the mini's any longer. Could this be true? Any way, I had to get a 4GB instead (the new iPod wasn't for sale yet at the store). I've read the countless of issues with the mini so that I don't