How can I change the speed of slides for each song on the custom list?

Hello - I am working on an anniversary slideshow in iphoto on my Mac.  It contains 145 photos.  I have a custom playlist of two songs.  I want to adjust the speed of the slideshow in the beginning to be slower because the song is slower.  Then I want the photos to move faster at the end.  I did notice I can specifically define the speed for each of the slides manually, but that would take forever.  Does anyone have a recommendation of a trick for doing this in batches?

What is your iPhoto version?
In iPhoto '11 you can change the duration for several slides at once, if you are using the Classic Theme or the Ken Burns theme.
In that case do the following: SElect several slides at once and open the Settings. Click the "This slde" tab and change the "Show this slide for ..." setting.

Similar Messages

  • HT3069 How can I change the content list when I change residence country?

    I bought an Apple TV in Mexico but came to came to the US to work on a project, so I brought my Apple TV with me. I already changed the credit card to an American one and all the country settings, but it still displays the Mexican list. How can I change the movie content?

    Purchases will be tied to the original account. Your US account will not have access.
    If your Apple TV is not displaying US content make sure the Apple TV location settings are correct. DNS should be on automatic.

  • HT4865 How can I change the incorrectly listed cellular number for SMS code

    I listed my iPad cellular number incorrectly to receive an SMS code which musted be listed to progress further. So I cannot retreive the four digit number
    which was sent to the incorrect number. How can I change it to the correct cellular number?

    From http://support.apple.com/kb/TS4644:
    Devices using iOS 7.0.3 or later: Tap Settings > iCloud > Account, then tap Keychain. Check that the phone number listed under Verification Number is correct. If not, enter another phone number.
    Macs using OS X Mavericks v10.9 or later: Choose Apple () menu > System Preferences. Click iCloud, then click Account Details. Check that the phone number listed under Verification number is correct. If not, enter another phone number.

  • How can I change the customer name in the invoice

    Hi mate,
    I bought a macbook air for working. It is awesome.
    Unfortunately, the customer name in the invoice is my name and should be the name of the company I am working for. Or I cant claim the expense from our cruel accountant.
    Is it possible to amend the customer name? If yes, how?
    Thanks

    damien_gong wrote:
    Thanks, .
    You're Welcome.
    damien_gong wrote:
    I will drop in their store tonight
    Good Luck 

  • How can I change the order of the photos in a slide show I have created on my iPad mini?

    How can I change the order of the photos I have selected in a slide show on my iPad Mini?

    Currently, the order in which the phone numbers appear (in a contact) is dependent on the sequence to which you enter them. There is no way to change that order other than re-entering them in the desired order.

  • How can I change the slide to 8 Radio buttons mutually exclusive?

    How can I change the slide to 8 Radio buttons mutually exclusive?
    I saw the example in Labview. but it only contains upto 5 radio
    buttons. I need 8. How can I change it? Is there any shortcuts?

    I made this with NI's radio button control found in the boolean palette.  Just resize the cluster border, and move the buttons to where you want.  To add a button, select one of them, hold down Control and Shift keys, then drag the button to a new location.  The button gets duplicated.  Do this until you have enough buttons.
    Message Edited by tbob on 10-31-2005 01:07 PM
    - tbob
    Inventor of the WORM Global
    Attachments:
    RadioButtons.PNG ‏2 KB

  • How can I change the pitch of a track?

    In Garageband 10.03, how can I change the pitch of a track?
    It seems that I somehow mistakenly changed the pitch of a guitar track I had recorded, so that al the notes in the track sound like they're about an octave too high.
    I don't know how I did that, and how to make the pitch slider appear so that I can try to lower the pitch.
    I saw three Youtube videos that show how to change a track's pitch by using the pitch slider, but none of them explain how to make the pitch slider appear.
    The pitch slider is supposed to appear in the lower, left corner of my window, but it doesn't appear in my window.  Instead the lower, left corner of my window says things like, Region, Notes, Time Quantize, Strength and Transpose.

    There's much to learn in Garageband!
    If you want a comprehensive introduction to the new GarageBand, have a look at Edgar Rothermich's book:
    Edgar's "GarageBand 10.0 How it Works"  explains it very well with many screenshots. You can buy it as iBook from the Book store, as PDF,  or as printed book from Amazon, Only, this version of the manual has been written for GarageBand 10.0.1, Some features have changed slightly since then.
    http://www.dingdingmusic.com/DingDing/Manuals.html

  • How can I change the preferred WiFi network in my MacBook Pro

    How can I change the preferred order of networks on my MacBook Pro? There used to be one network at my office. Now there is a second higher speed wifi network also present which I would prefer to connect to, but the Macbook connects to the older one unless manually changed.

    Apple menu > System Preferences > Network > Advanced > Wi-Fi > Drag networks into the order you prefer.

  • How can I change the language for the Quiz Results page?

    How can I change the language for the Quiz Results (labels on buttons and text labels)? Is this possible only manually each time, or are general settings possible?

    For Quiz Slides you've already added to your project file you will need to change the labels manually.  If you change your Quiz Settings and Master Slides that control the defaults and then add new Quiz Slides, THEN those slides will carry your new settings.

  • How can I change the transceiver capabilities

    How can I change the transceiver capablities of my MX98715-based Ethernet Adapter from adv_autoneg_cap to adv_10fdx_cap.
    I tried to change everything including system file or use the ndd command, but it takes no effects.

    almost all modern networking equipment runs IEE 802.3 100 Mbps 100Base-T Ethernet in Full Duplex mode.
    What you mean to say is that your Internet connecion appears slow, not that your connection between your modem and your PC is slow. However, be warned that some manufacturers have limited their hardware to 10Base-T Half-Duplex mode (i.e. 10 Mbps) as most ISPs had not increaseed their traffic loading.
    At Charter Communications, we recently added 10 Meg x 1 Meg service, and will be increasing that down the line, but not for some years.
    Still, you are very unlikely to be able to push even 50% of that link, due to the self-protection and bandwidth-conservation built into network protocols.
    Do a trace route to any website to find out (if possible) where a link may be slow. After that, do a continious ping (Windows: ping -t [site]), and see if there is any packet loss occuring, or possibly the website being slow at some times. (Ctrl+C will stop the ping).
    I work at our divisional NOC and know a lot about our systems, and why things go slow. Please note that during maintenance windows (typicallt midnight to 5 am) some core and access equipment may have changes being made to them that slow speed as well.

  • How can I change the tax formula in system form ?

    Hi,
      Usually the tax is extra-added for 5% in calcaulating.
      But now I need to change the formula of tax to be embeded.
      How can I change the tax formula in system form ?
                                           Besr regard!

    Great!
    I suppose "Speed-button" is the same as "toolbar button", right?
    To all (more or less):
    It confirms that I am on the right track when I bother the participants in this forum time-after-time with remarks to train themselves - or get trained - in application + customization features (+ SDK).
    Of course as developers we can use the SDK for whatever purpose and try to develop additional functionality - ... that might already be there, but we just don't know about it
    In addition the power of customization features (UDFs/UDTs/queries/formatted searches (also bound to fields on SAP Business One forms)...) should not be underestimated!!!
    When starting development with SDK you - or the person who writes the specifications for an Add-On must IMHO be familiar with the application + the customization features + being trained with SDK to avoid unnecessary development or getting into trouble latest when the solution is shipped to a customer...
    Please again note that there's a lot of eLearning available in the education area in the SMB Portal on SAP Service Marketplace.
    Regards,
    Frank

  • I just set up a wireless network using an airport express. How can you change the network name

    How can you change the name of a wireless network set up with an airport express

    Yes, you can. If you use the current AirPort Express, Apple says that you can connect up to 50 devices. Realistically, make that 25-30 or so before the speed really begins to drop.
    Remember that you will have to reset the modem though, before you connect it to the AirPort Express as the modem "remembers" the settings for your computer.

  • How can I change the display of Inbox in my iPad's mail app- so that it takes up the full screen?

    How can I change the display of Inbox in my iPad's mail app- so that it takes up the whole screen, as opposed to just about one third; the other two thirds display the full text of the selected email?

    You can't change the display in the Mail app, if you are holding the iPad in landscape orientation then the left-hand third will be for navigation, and the right-hand two-thirds will be an email. If you hold the iPad in portrait orientation then the navigation section becomes a drop-down section.

  • How can I change the background of a running webpage on my own. Example Facebook I want to change its backround color from white to black just in my view not for all

    How can I change the background of a running webpage on my own. Example Facebook I want to change its background color from white to black just in my view, not for all. Cause I really hate some site with white background because as I read for an hour it aches my eyes but not on those with darker background color.

    You can use the NoSquint extension to set font sizes (text/page zoom) and text colors on web pages.
    *NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

  • HT201361 Is it possible to save the screenshot files to a different folder than desktop. How can I change the folder?

    Is it possible to save the screenshot files to a different folder than desktop (that is the default). How can I change the destination folder? Thank you, Sal

    To change the screenshot capture location to a new place on your Mac, first think of a location that would serve you properly. We like to place ours in a "Screenshot" folder located inside of the User's "Pictures" folder. To change the location to this new location, open the Terminal and enter the following command:
    defaults write com.apple.screencapture location /Users/[u]/Pictures/Screenshots/
    Replace "[u]" with the name of the user on your system. Once you have entered this command, let's restart the screen capture utility by restarting the SystemUIServer by entering the following command:
    killall SystemUIServer
    You can optionally log out and back in instead of entering this second command, thus restarting the SystemUIServer. Once restarted, all screen captures taken from here on out will end up in your /Pictures/Screenshots/ folder in the User's home folder on your Mac.

Maybe you are looking for