How can I change the tempo on drums in Garage Band 10.0.2? Not tempo of project.

I need to change the tempo of the drums that came with Garage Band 10.0.2 to fit the tempo of the other tracks in my project.  How can I do this?  I don't want to change the tempo of the other tracks.  Thanks.

A drummer track follows the tempo of the project automatically. You can switch between different drummers, and change the drum pattern of the regions in the Track editor by dragging the puck around between simple or complex, louder soft.
But you can only adjust the beats per minute of the whole project, not for the drummer track individually.
If you want to change only the tempo of the drum track, you have to use a work around, for example export your finished drum track as an audio file with a different tempo and reimport it.
silence all tracks but the drummer track.
set the tempo to a different value in the LED display.
Share the audio track to the disk.
Reset the tempo to normal and unsilence your other tracks.
Reimport the drum track.

Similar Messages

  • How can I change the tempo (and the snap grid) of the project without altering the duration of the original audio clips?

    This question is for Logic Express.
    I have many very short audio clips that I recorded into my project.
    I want to adjust the project tempo so that I can use the snap grid to make a beat out of my short audio clips. But when I change the project tempo, it automatically adjusts the lengths of my audio clips.
    So how can I change the tempo (and the snap grid) of the project without altering the original audio clips?

    The reason some files sound funny and others don't is because audio is handled a few different in Garageband depending on it's source (audio your recorded vs Apple Loops vs non Apple Loop pre recorded audio). Each of these have different color regions with different properties.  I just found this thread that might better explain it:
    http://hintsforums.macworld.com/archive/index.php/t-67538.html
    I hope that helps!

  • How can I change the tempo and pitch of individual tracks on Garageband 10.0.3?

    I just recently started using Garageband 10.0.3 and it's been updated completely, which is good in some ways. However, many things have been cleaned up and/or hidden and it's taken me a while to find certain tools or do certain things.
    I've been trying to change the pitch of tracks in my project and it's taken me forever to find out how, but eventually I did. I think, though, that it changes the pitch of the whole project? (I changed the pitch by using one of the plugins, I think it's called AUPitch?) I have to double-check that, but that's how I've been changing the pitch of the tracks.
    To the bigger problem... Tempo. I have searched for a good 2 hours trying to find out how to change the tempo of tracks individually and I'm really frustrated. I tried the BPM solution (changing the BPM at the very top), but that seems to change the whole project. I just want to change the tempo of individual tracks, not the whole thing. Is it even possible now?
    I'm really considering using a different program. Hopefully this is just me being slightly clueless and not Garageband's fault.

    The AuPitch filter will work on individual tracks, no problem.
    But you can change the tempo only for the entire project with the global tempo setting or the Tempo Track.
    As a work-around: To change the tempo of individual tracks solo each track, change the tempo, then bounce the track as an audio file and reimport that audio file with the changed tempo to an audio track.

  • How can i change the tempo of a track without changing pitch?

    I did this before but for the life of me can't figure out how i did it. Usually when I change the tempo (BPM), the recorded tracks sound warbly. But on some of my projects, this doesn't happen even though they're "real" sound recordings.
    Both projects are using Groove Fix and under "Pitch" I have "Follow tempo and pitch" checked off. Why is one project
    changing tempo seamlessly while the other project is warbling along? Automatic tuning is not the issue because neither project is enabled for that.
    Thanks,
    Steve

    The reason some files sound funny and others don't is because audio is handled a few different in Garageband depending on it's source (audio your recorded vs Apple Loops vs non Apple Loop pre recorded audio). Each of these have different color regions with different properties.  I just found this thread that might better explain it:
    http://hintsforums.macworld.com/archive/index.php/t-67538.html
    I hope that helps!

  • How can I change the tempo of an imported track in GarageBand 10.0.1?

    Hi - I am trying to change the tempo of an imported track in GarageBand. I am very new to this and need basic help! My son was able to change the tempo on his older version of GarageBand but we can't seem to do it on my version 10.0.1. Thanks.

    Woolsey5 wrote:
    I am trying to change the tempo of an imported track in GarageBand [...] version 10.0.1.
    http://www.bulletsandbones.com/GB/GBFAQ.html#changeimporttempogbv10
    This FAQ entry offers a Minute GarageBand video tutorial
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • How can I change the tempo of a drum loop?

    Ok so I have the rhythm pack and lot's of drum loops. They are all insanely fast. It's hilarious, I can't find a single loop with just a constant hi hat tap suitable for the beginning of a slow rock song.
    More importantly, there doesn't seem to be a way to adjust the tempo of just the drum loops. It seems like it should be an easy thing but I've tried everything and looked all over google.
    Please, if there's a work around to slowing down these 2000+ super fast drum loops, help!
    Thanks

    The drum loops should adjust to the tempo of your song, also in the preview. So if you set your song to a crazy fast tempo, all loops will play very fast!

  • How can I change the tempo without distorting the vocals?

    Hi
    I have a song which is quite fast, so I tried to record it slow then increase the tempo after I'd recorded it. The problem is when I do this, the vocals get all distorted and sound wavy.
    Is there anything I can do to increase the tempo without this happening?
    Thanks

    I see your point, but then why is it when you an import a song from itunes and increase the tempo the vocals dont become distorted?
    I can understand how chaging the pitch of a track can distort the vocals, but not the tempo.

  • How can I change the tempo of a single track?

    Hi,
    I've been struggling with finding a way to change the BPM of a single track. There are three tracks and only one of them needs to be sped up. When I try using the flex editor, it is too complicated for what I am trying to do. Is there any more comprehensive way - a slider, or an input option - for changing the BPM of a single track in the newest version of garageband?

    The reason some files sound funny and others don't is because audio is handled a few different in Garageband depending on it's source (audio your recorded vs Apple Loops vs non Apple Loop pre recorded audio). Each of these have different color regions with different properties.  I just found this thread that might better explain it:
    http://hintsforums.macworld.com/archive/index.php/t-67538.html
    I hope that helps!

  • How can we change the field confirmed work of SAP PPM from edit to not edit mode ? I need it into non edit mode for time recording with ChaRM

    Hello everyone,
    Do someone meet this issue ? Do you know if it has a link with customization of ppm or customization of ITSM ?
    Many thanks in advance for your replies !

    It seems that I've solved this issue. To get it work:
    1. Select checkbox Time Recording and Travel Expenses via CATS for project type. Path: SPRO —> SAP Customizing Implementation Guide —> SAP Portfolio and Project Management —> Project Management —> Structure => Define Project Types
    2. Run/schedule a synchronization with the report DPR_CATS_CPR_TRANSF (Transfer of CATS Itemizations to Project Management Application).
    Time Recording from a Request for Change to a PPM ProjectTask - Working with Projects - SAP Library
    Regards,
    Alex

  • How can i change the screen name in my icould account?

    my Apple ID used to have my Dad's name because of the billing issues.. now is changed again to have my name, but i keep seeing that my account on icloud.com still says my dad's name, so if i try to send an email through there it says my dad's name and my email address instead of my name...
    how can i change the name that appears linked to my icloud account? (note that as i already sayd my Apple ID has my name now, i jsut want to know why is not my name in my icloud account?)
    thank you,

    I believe it can be changed by going to https://appleid.apple.com/, click Manage your Apple ID, sign in with your iCloud ID, select "Name, ID and Email Addresses", then click "Edit" next to the name listed under "Your Name" and change it as desired.
    Also, if you are trying to change the sender name for your iCloud email account, you'll want to go to icloud.com, sign into your account, open Mail, click the gear shaped icon on the bottom left and choose Preferences, go to the Accounts tab and enter the name you want to use in the Full Name field and click Done.  Then quit Mail (Command-Q) on your Mac and re-open it.  Your new From name should now appear in the drop-down list when you compose a new email.
    (The image was removed in your post above because it showed your iCloud email address.)

  • How do you change the tempo of a drum loop?

    Forgive my ignorance but I am still familiarizing myself with all the features of the program. How do you change the tempo of a drum loop? I see in the help file where it tells you how to change the projects overall tempo but not where to change the drum tempo itself. Thanks.

    Nevermind I found it, thanks.

  • Can I change the tempo of a section one track in Garageband 10? For example I would like a drum track to be half the speed of the overall tempo for 4 bars. Is this possible? Thanks.

    Can I change the tempo of a section one track in Garageband 10? For example I would like a drum track to be half the speed of the overall tempo for 4 bars. Is this possible? Thanks.

    Can I change the tempo of a section one track in Garageband 10? For example I would like a drum track to be half the speed of the overall tempo for 4 bars. Is this possible? Thanks.

  • How can I increase the tempo of a song without distorting the vocals?

    I have a song I recorded, with the vocals and backing track on seperate tracks.
    The song has been recorded a bit too slow, and I need to increase the tempo. However, when I do this, the vocals become distorted and have a wavy sound.
    Is there any way I can increase the tempo of the song without distoring the vocals? I've tried doing it on the final song (merged tracks) and on the vocals alone, but nothing seems to work. It doesn't make sense, since when you do the same thing to a song by a professional artist, you can increase the tempo of the song without distoring the vocals.
    What am I doing wrong? How can I increase the tempo of my song without distoring the vocals?
    Any help would be greatly appreciated.

    in general GB doesn't do such a great job with changing tempo of audio recordings, what you might find works better is to export your song uncompressed and then use an audio editor:
    http://www.bulletsandbones.com/GB/GBFAQ.html#audioeditors
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • How can I change the display of Inbox in my iPad's mail app- so that it takes up the full screen?

    How can I change the display of Inbox in my iPad's mail app- so that it takes up the whole screen, as opposed to just about one third; the other two thirds display the full text of the selected email?

    You can't change the display in the Mail app, if you are holding the iPad in landscape orientation then the left-hand third will be for navigation, and the right-hand two-thirds will be an email. If you hold the iPad in portrait orientation then the navigation section becomes a drop-down section.

  • How can I change the background of a running webpage on my own. Example Facebook I want to change its backround color from white to black just in my view not for all

    How can I change the background of a running webpage on my own. Example Facebook I want to change its background color from white to black just in my view, not for all. Cause I really hate some site with white background because as I read for an hour it aches my eyes but not on those with darker background color.

    You can use the NoSquint extension to set font sizes (text/page zoom) and text colors on web pages.
    *NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

Maybe you are looking for

  • I can't seem to close the screen on my new MacBook Pro with ext montitor

    I have a new MacBook Pro with a Samsung T240 through the DVI link. I can see my desktop on the external monitor when the laptop screen is open, but if I close it the computer goes to sleep and I cannot see anything on the T240. I have the Bluetooth k

  • Background color change . . .

    We're trying to create a title page for a project we're doing. On the title itself, we used the Bevel and Emboss function. When we printed a proof, however, the background within the area of the text frame came out darker than the rest of the backgro

  • Oracle iAS  10.1.3.5.0 Release 3 XALAN XSLT BSF Manager not found

    Hello to all, I have a strange problem. I have a very well running app under the iAS release 2. Now I have to go at release 3. The main problem that I face has to do with the XALAN libraries. I used to load some templates (XSL) in memory like this: S

  • Detail transaction

    Hello Experts, We want to know detail transaction of our revenue account. All informations including row information. In GL report, we can't see detail document e.g if there is an invoice, it must include the items in the invoice. . We use B1 2007A.P

  • Sending only a specific set of employees through idocs

    Hi, I' am using idocs to send data between two SAP systems. http://help.sap.com/saphelp_erp2005/helpdata/en/6c/b9b77f806311d2b45a006094b9c9b4/frameset.htm The steps I followed can found from the above link. In this scenario, I want to send the detail