How can I change visibility of images pasted on the front panel?

Hello,
I'm using LabView 8.5 and I have pasted images on my front panel.
Is there a way to programmatically change the visibility of these images (i.e. have them displayed sometimes and not at other times)?
There doesn't seem to be an option to get a visibility node (or anything else programatic) when I secondary click on the images.
Alternatively, if there is some kind of control in 8.5 that I could load and display images in order to obtain this visible/not visible functionality, that would also be helpful.
Thank you in advance
Frenk
Solved!
Go to Solution.

You are looking for the picture control. This thread seems to have answered the question
=====================
LabVIEW 2012

Similar Messages

When I right click on a link "Open link in new tab" since a few days, it "jumps over" the tab to the right and opens in the tab next to that. How can I change this back to opening in the tab next to the page from which I opened as it used to be?

When I right click on a link "Open link in new tab" since a few days, it "jumps over" the tab to the right and opens in the tab next to that. How can I change this back to opening in the tab next to the page from which I opened as it used to be?

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
* [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

How can I change my Profile photo or edit the thumbnail?

QuestionHow can I change my Profile photo or edit the thumbnail?
AnswerThere are a couple of different ways to change your profile photo or thumbnail image on Tagged.
Here's a quick How-to video that shows you how to change your profile photo
If you wish to change your profile photo, follow the instructions listed below:
Hover your mouse over 'More' in the top Nav bar and select Photos.
To use one of your previously uploaded photos as your profile photo, place the cursor over the photo you wish to use, and click the small green “#1” box when it appears
If you wish to use a new image as your profile photo, upload the image to your photo gallery, and then click the small green “#1” box on the photo
If you are viewing one of your photos individually, you can also set it as your profile photo by hovering over it and clicking the same green "#1" button. You may also edit the caption and comment on your photo in this view
You can also change your profile photo by doing the following:
On the Navigation bar click Profile and select the Edit Profile link to the left of your Profile picture.
To upload a photo locally from your computer, click the “Browse” button, select the image you wish you use, and then click “Upload”.
To upload a photo using an image URL address, click the “Add from image URL” link, paste the URL address into the field, and click “Add Photo”.
To use a photo from your gallery, click the “Use one of my photos” link to open a thumbnail gallery of your uploaded images. Click on a thumbnail to set that image as your profile photo.
After selecting a photo, you can alter its thumbnail by the marquee box by dragging the “anchor” points of the box. When you are finished, click "Save Thumbnail"

HELP! I was fooling around with my profile pic and selected and saved a cropped thumbnail. I hate it, and I haven't been able to figure out how to return my thumbnail to just a mini-version of my full profile pic. I've even re-up-loaded a copy of the original photo, with a different file name, but Tagged automatically crops it to the same thumbnail. Is there any way to return my thumbnail to just a mini-version of my whole pic? Thanks for your help :~)

How can I display a changing variable in a subvi on the front panel of the main vi as the subvi is excuting

In the document attached the vi on the right is sub to the vi on the left. On the subvi on the right the variable "Field Reading" is continuously updated on the front panel of the subvi as the "for" loop is executed, but only the last value of the variable is updated on the main vi front panel which is what is expected. My question is how can I display the changing value of "Field Reading" on the main vi front panel as the "for" loop in the subvi is running?
Thank you.
Solved!
Go to Solution.
Attachments:
Doc2.docx ‏554 KB

Hopefully I can explain it well enough. It really is simple.
1) Create an empty global variable and call it something like User Interface References.vi
2) For each and every control and indicator on your front panel, right-click and select Create/Reference
3) Place these references wherever you like (I use a series of Event cases to perform my initialisation and these all live in one of these event cases). They can be placed anywhere in the main vi.
4) For each of the references, right-click and select Create/Indicator
5) Moving to the front panel, Cut all the indicators and Paste them in the global variable (eg. User Interface References.vi)
6) Moving back to the block diagram, wire the global variable to each of the references and select the same named global variable.
All the hard work is now done (until you add another user interface terminal). You should now have something that look as shown below, [except the reference labels would be to the left (not sure why the snippet put them above)]. In my latest program I have 82 references!
Done. You can now access all your front panel controls and indicators anywhere in your program as shown below.
You can just select Value in most cases, but in this particular case I wanted to fire off an Event to do some things (log the alarm) as well as just update the value. So, this is another bonus with the method.
Hopefully this all makes sense. If not, let me know.

How can I change my icloud account without knowing the old password

How can I change my icloud account on my phone when I don't know the old password and I'm on a shared plan

iCloud has nothing to do with your shared plan.
Try
https://iforgot.apple.com

How can I change Siri's time to match the system time?

I'm trying to set an appointment with Siri for 10:00am tomorrow. She completes the task telling me "here is your appointment for 10:00am tomorrow", but the phone is showing that it is setting it for 2:00am. The time difference is exactly 8 hours. How can I change this so that they match?

Doesn't work for me. Tried all time zone settings (both in Date/Time and Calendar) to turn on and off, to set timezone 1 hour less - no result. Everytime I have appointment set 1 hour later than Siri recognizes.
I live in Moscow, Russia, and maybe the problem is that starting this year Russia doesn't switch to winter or summer time.
Any advice?

How do I monitor parameters from a SubVI on the front panel of the main VI?

Good day. I have a LabView program that I am modifiying (actually it is a National Instruments demo program called Simple PID Demo). On the Front Panel of the main VI, I need to monitor several parameters that are on a SubVI. How do I do this?
Thank you very much for your time and help.
Michael

Hi Michael,
Global Variables should solve your problem.
Looks like you have to pass values from Sub VI that will execute continously inside a main vi.
Look at attached VI
Hope you can implement this type of logic in your program.
regards
Dev
Attachments:
Main_1.llb ‏53 KB

How do I input data to a table on the front panel and stop the program immediately as button is pressed?

What should I do if I want to display on the front panel in real time the values from Polarizer #, P1, P2 and the last calculated value (P2/P1 * 100) called T% in a table or some graphical representation like that? What would I have to do? It could just be Polarizer # and T% if that would be simpler. I just want to let the user know the values in a list, spreadsheet or table as they go. One last thing is that I would like to be able to stop the program at any point in time as soon as the stop button is pressed. As of now, when the button is pressed it goes through the iteration currently in progress and then one afterwards. I want the program to end as soon as the stop button is pressed no matter what sequence it is. What can I do to achieve this? Could you give me an example or modify my program to show me this.
Thanks,
Steve
Stephen Coward
Northrop Grumman
[email protected]
Attachments:
EPM2000 almost done.vi ‏50 KB

Put a single frame sequence structure around your stop button and then wire from the error cluster going into the error handler to the edge of the sequence structure. Now your code will stop at the end of the current iteration. To see why this works, watch you code execute with execution highlighting turned on and review the section of the manual talking about "Dataflow".
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

HT201436 I never had a voicemail password so How can I change what I never had in the first place? How do I create a first time password? thank you

I have never had a voicemail password for my iphone, but it keeps asking for one. In Settings it only allows you to change your password. How can I create a password for the first time? thank you

Voicemail is a Carrier feature.
Contact your Carrier.

How can I change between JSP and Java in the page language attribute

Does any one know the answer to this? I am trying to Switch between the 2 in the middle of the page. I want to include a file that uses <%@ page language = "JAVA" %> but the main mage uses Java Script. How can I switch it for this one file. I can't find the answer anywhere. Thanks for your time, and please help me. Also can some one post a good link for Session Tracking. I can't find much good information on that. Thanks again.
Eagles757(JAY)

Wow this didn't make sense in so many ways. It's truly bordering on nonsense. I think it's written in English.
<%@ page language="Java" %>This is optional. JSPs don't use any language other than Java. This is known as a JSP Directive. This line will be processed by the JSP/Servlet engine, and you won't see it in your output. If JSP ever supported a language other than Java, this would be where you would change it.
<script type="text/javascript">

</script>You can include a block like this in your JSP file. The JSP/Servlet engine will not process this script block at all (unless you include JSP <% %> tags somewhere in there, in which case they will be processed before the response is sent back to the web browser). This script block is where JavaScript goes. This code will be executed on the client's browser.
This is about as clear as I can make things given how muddled your question is. Please ensure you understand the basic differences between JSP, Java, JavaScript, HTML, Servlet engine, web browser before proceeding. Understand what code executes where, and in what order.
Brian

How can we change value of a field in the Repeating Table using SharePoint Workflow 2013.

Hi
I have an InfoPath form published on a SharePoint Library. The form contains a Repeating table and after submit a workflow runs. In this workflow I want to change some values of the fields within Repeating table.
How can I do this?
Thanks.

Hi,
I found a similar thread posted by you here:
http://social.technet.microsoft.com/Forums/en-US/e1fa36c1-cb5c-456d-ba40-2f26301913d2/how-to-loop-through-each-row-in-a-repeating-table-using-sharepoint-workflows?forum=sharepointgeneralprevious
I suppose both the threads are reuqesting the method to get values from repeating table via workflow, so we can focus on the issue on the other case. If there is more requestment here, let me know.
Regards,
Rebecca Tu
TechNet Community Support

We have 10 ipads connected to 1 computer and 1 account. How can I change/erase an account so that the seperate offices can use itunes and synchonise itselve?

Hi there!
Our department (marketing) wanted to control the input of the iPads. We found out it was useless because our salesteam wanted to personalize the ipad (think about projectspecific items etc.) It is impossible for 1 person to control 10 iPads and deliver input for each different iPad. So we decided that each office can have its own account. But these ipads are already connected to 1 computer (i know you can connect them to a max. of 5 computers, but that is not enough in this case..) They can make there own account with their personal creditcard or that of the office. How can i disconnect the iPads en still remain the files on the iPads?
With kind regards,
Willeke

Whatt ype of "files" are you concerned about? Are they purchases from the AppStore or music, video etc, or something else? If you are concerned about Apps, one method of centrally distributing apps is to purchase apps with a corporate credit card, and then "gift" them to the various employees. The "gifted" app is sent to the email address you specify and can actually be forwarded, prior to install to another user for their use...

How can i copy a moving image (video) off the screen?

How can I copy Video from the screen? IE, is there a similar way to the cmd arrow 4 to copy a screen shot?

When I paste a URL into an email body (Yahoo mail), just the text is pasted rather that the live web link I want represented. How can I change this so a pasted URL is shown as a live link in the email body?

The question says it all!

Just above the textarea that you use to enter the message text on the "Compose New Mail page" there is usually a button bar with buttons to add text formatting like Bold and Italic.<br />
That toolbar may also have a button to turn a text link into a clickable hyperlink (look for a chain like button).<br />
You can select the text and click that button to turn the link into a clickable hyperlink.<br />
If you can't find the button then hover them all to check the tooltip of each (e.g. Insert hyperlink).
* Make Link - https://addons.mozilla.org/firefox/addon/make-link/

How can I change my primary email address to the one that I use for my rescue email address?

I no longer use the email address associated with my apple ID account and the rescue email address I used is now my primary email address for everything, since it its not allowing me to just simply change my email address since its my rescue email address i want it changing to, can it be done and how?! :S Thank you!

You will need to remove it as your rescue email : log into your account via the 'manage your apple id' button on http://appleid.apple.com, select the 'Password And Security' section on your account's screen, and answer the two security questions that show - you should then be taken to another screen where you can change or remove your rescue email address.
Then try logging out of your account and then log back in and see if you can then use it as your primary email address.

How can I change visibility of images pasted on the front panel?

Similar Messages

Maybe you are looking for