How can I charge my iPad 2 when I'm already using the port for a projector?

I run training workshops all day and want to use my iPad to run Keynote or PowerPoint through a projector. I already have the VGA adaptor and that all works fine. Trouble is, the battery only lasts half the day. So I have to swap over to a netbook for the rest of that day while the iPad charges...
Is there a double-adaptor that will allow me to plug the charger in as well as the VGA adaptor?
Seems such an obvious thing to want to do but I've looked all over for an adaptor and I haven't found one...
How can you charge an iPad if the only port on it is already occupied?
Cheers
Steve

Hi Texas Mac Man
Thanks for your suggestion. Kinda means I have to buy a wireless-capable projector. Most of the VGA projectors in the venues I work with are fixed-in-the-ceiling and not wireless capable...
My luck with doing off-the-mainstream stuff like jailbreak etc is that (1) it won't work for me, or (2) it all goes horribly wrong, stuffs up my machine and voids the warranty... So I tend to stick to the proprietory stuff.
Not very adventurous, but then I need dependable stuff with a warranty and someone I can yell at to fix it.
Maybe Apple will read this and provide a risk-free solution.
You never know....
But thank you.

Similar Messages

TS2634 When I connect iPad to Macbook Pro through USB Port or even charge my iPad via the apple adapter, it has no response at all. I can only charge my iPad when I totally shut off the iPad. Pls advise.

When I connect iPad to Macbook Pro through USB Port or even charge my iPad via the apple adapter, it has no response at all. I can only charge my iPad when I totally shut off the iPad. Pls advise.

Well ... the charger is the original charger and just checked and confirmed it is a 5.1V charger. How come? Next is why when i connect my iPad via original usb cable, no response from macbook pro? used to sync with iTunes now totally dead.

How can I activate my iPad when it has an old iCloud adress that I don't know the password for it?

How can I activate my iPad when it has an old iCloud adress that I don't know the password for it?

Click here and reset the password. If you've forgotten the Apple ID, you can recover it from the same site.
(112195)

How can i reset my ipad when i have lost the code

how can i reset my ipad when i have lost the 4 didgit/number pass code

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

How can i unlock my ipad when it show connect to itunes

how can i unlock my ipad when it show connect to itunes

Force iPad into Recovery Mode. Follow step 1 to 6 very closely.
http://support.apple.com/kb/HT1808
Note: You may have to repeat the above a few times.

How can I update my iPad 3 to iOS 6 using iTunes

How can I update my iPad 3 to iOS 6 using iTunes

Welcome to the Apple Support Communities
See "Update your device using iTunes" > http://support.apple.com/kb/HT4623?viewlocale=en_US&locale=en_US

HI, I need your help. How can I delete all data, when I do not have the special security code, which I didn´t remember ? I also think, that I never create this code before. But I cannot put my settings back.

HI, I need your help. How can I delete all data, when I do not have the special security code, which I didn´t remember ? I also think, that I never create this code before. But I cannot put my settings back.

You must remember the code, if you can't then take the phone and proof of purchase to an Apple Store.

HT201269 how can i restore my ipad from a previous backup (not the most recent)

how can i restore my ipad from a previous backup (not the most recent). I can get the restore from backup, but there is only the most recent one visi
ble

Again, iTunes only keeps one normal backup, per device. Any other backups listed are backups created from restore points. These are time/date stamped & are not overwritten.

I can not charge my Ipad after I droped it,also the home screen dos not work,whats the solution?

i can not charge my Ipad after I droped it,also the home screen dos not work,whats the solution?

Hard Reset
Press and hold BOTH the Sleep/Wake button & the Home button until you see the Apple logo on the screen.
if no result try to back up and restore via itunes on a computer.
if wont restore try this
recovery mode
open itunes on computer
plug cable into computer not iOS device
turn device off
hold home button and plug cable into IOS device. do not release home button until an itunes graphic appears on IOS device.
look to computer should have message about recovery mode click ok and restore
Peace, Clyde
if u need an article see
http://support.apple.com/kb/HT1808

How can i print a full page of mailing labels using the same contact in numerous times/my mailing address

how can i print out a full sheet of labels using the same contact info numerous times, mailing labels

Are you using DesignPro from Avery? You should.
It gives you the option to print individual labels or all the same:

So just downloaded 5.0 and it deleted all my contacts, how can I get it all back? I already tryed the "Back Up" or "Restore" and it's still blank on my iphone??

So just downloaded 5.0 and it deleted all my contacts, how can I get it all back? I already tryed the "Back Up" or "Restore" and it's still blank on my iphone??

You should have been syncing your contacts to your computer regularly. Just sync them back ot the iphone from your computer.

How can you tell what pictures from iPhoto you already used in iMovie?

how can you tell what pictures from iPhoto you already used in iMovie?

Log into your account on a computer (iTunes>Store>View Account) and go to Purchase History

Do I need to purchase an iPad with cellular to use imaps or can I purchase an iPad with wifi only and use the data connection on my iPhone.

Do I need to purchase an iPad with cellular to use imaps or can I purchase an iPad with wifi only and use the data connection on my iPhone.
My aim is to have maps on the bigger iPad screen.

the wifi version don't have an gps chip

How can I resize an image without losing resolution or using the crop tool? I am using Photoshop Elements 13 on a PC.

How can I resize an image without losing resolution or using the crop tool? I am using Photoshop Elements 13 on a PC.

Hi Peru Bob,
I've tried two images, the results were:
Image 1
Jpg, original file size 923KB, dimensions 848px x 279px.
After resizing to 848px x 180px with 72dpi, the file size decreased to 164KB.
Image 2
Jpg, original file size 809KB, dimensions 1200px x 1800px.
After resizing to 668px x 722px with 72dpi, the file size decreased to 307KB.
So, there seems to be a fair file size loss - is this to be expected?

How can i download photoshop elements and premiere elements 10 using the serial number not the cd?

How can i download photoshop elements and premiere elements 10 using the serial number not the cd?
I tried downloading the trial elements 11 and entering the serial number but it wouldn't work, i cannot find a trial for elements 10.
Thanks

http://prodesigntools.com/photoshop-elements-10-direct-download-links-pse-premiere-pre.htm l
Follow the instructions on that page carefully before you click the download link.

How can I charge my iPad 2 when I'm already using the port for a projector?

Similar Messages

Maybe you are looking for