How can I check a jdbc connection

With Sun Java App Server, after I create a JDBC connection, I use a button to check if the connection was OK.
I cannot find the same button or method to see if my Sybase connection is correct because all I get is "is not bound in this Context".
I installed the sybase jdbc driver in the install_dir\lib_directory.
In the jdbc wizard I use the Sybase Driver: com.sybase.jdbcx.SybDataSource
TIA,
Lorenzo Jimenez

Similar Messages

How can i check if my connection is b, g or n?

Hello, I can log on through wireless at my school. I have a wireless n airport card. How can I check in my macbook to see if I am using n or just b or g? I couldn't find it under the network utility or in my preferences. Please let me know! Thanks!

In Network Utility under the Info tab, select the Network Interface (en1) for the WiFi, (en0 is the wired Ethernet port) and it will report the Link Speed and the Network Adapter Type. I don't know if you can tell what protocol (a/b/g/n) is actually being used, other than by inferring from the link speed.
With my Airport Extreme Base Station in g/n mode I am getting a Link Speed of 130 Mb reported on my MacBook. My Dell M90 operates only in (g) mode gets around 55 Mb. Of course my DSL ISP is only about 10 Mb service...

How can I check who is connected to my network?

Hello,
can someone suggest me a tool or widget that allows me to verify who is connected to my private wireless network?
I am also looking for a tool or widget that warns me when a new user has entered the network.
Thanks in advance
Tom

If you use WPA then no unauthorised user will be able to connect to your network.
Depending on the age of your Mac, the Airport Management Tools will allow you to see who is connected to your wireless network.
Airport Management Tools
iFelix

How can i check the devices which are connected with my AirPort Express?

I saw an unknown device in the app 'Who Uses My Wifi?', how can i check it through AirPort Utility and can i remove this device by the app?

Open AirPort Utility
Hold down the option key on your Mac while you double click the picture of the AirPort router
Currently connected wireless ciients will be displayed
Don't forget about the wireless printer you might have, baby monitor, wireless thermostat and other items that connect using wireless. They will appear on your check.....not just computers or iPhones, etc.
If you have 3 wireless devices, and you see 4 devices connected, you may have an unwanted guest.
If you are using good wireless security, like WPA2 Personal, and a good password, it is extremely unlikely that another device will be on your network

When I connected to iTunes, my phone said it was in "restore" mode, but I don't know why. Iam afraid that if I continue with the restore, I will lose my recent pics. How can I check iCloud to see if my pics are there? Will I lose my pics if I restore?

When I connected to iTunes, my phone said it was in "restore" mode, but I don't know why. Iam afraid that if I continue with the restore, I will lose my recent pics. How can I check iCloud to see if my pics are there? Will I lose my pics if I restore?

Crouching Tiger wrote:
When I connected to iTunes, my phone said it was in "restore" mode, but I don't know why. ...
Once the Device is asking to be Restored with iTunes... it is too late to save anything...
To minimize Loss... Once you have Recovered your Device... Restore from the most recent Backup...
Restore from Backup
http://support.apple.com/kb/ht1766

How to restore my ipad?My ipad say on screen CONNECT TO ITUNE.How can i do when i connect with computer.It is need itune new version.Can you sent me.I will be waiting your answer.Please help me sir.

How to restore my ipad?My ipad say on screen CONNECT TO ITUNE.How can i do when i connect with computer.It is need itune new version.Can you sent me.I will be waiting your answer.Please help me sir.

Check for Updates.
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%208/78d42b19fa42e8d83b5 5a65e1333373f_zpsf58bbe10.jpg

How can I display modes in connection create window

Hi Pro,
I create a environment/model, then I get into EPM excel addin, try to create a connection, but eventhough I choose my environment created, but I get blank list for model drop down list. how can I display modes in connection create window?

Hi Yi Fei,
Add user to your environment, check their security profiles, also check roles in BW.
Andy

How can i check my mails on the iphone and make sure that the mail wont pop up again on my computer ?

How can i check my mails on the iphone and make sure that the mail wont pop up again on my computer/ will be deleted on the server ?

For that kind of connectivity you need to be using an email account configured either as IMAP or Exchange.
IMAP & Exchange accounts will maintain a sync across all your devices, so if you read / delete a message on your phone, it will disappear from the server as well. This cannot happen in POP email accounts.
If your using gmail, instructions on how to set up exchange / imap are here http://www.google.com/support/mobile/bin/answer.py?answer=138740&topic=14252
Alternatively, if its anything other than Google, you will need to contact your email providor or IT department (if your email address resides with an enterprise environment) to get the correct settings.
Hope this helps!

Was my T61 shipped without Bluetooth? How can I check?

Recently I bought a T61 with Windows Vista Ultimate.
When I ordered it, I selected bluetooth capability and the integrated bluetooth pan (or whatever was there to click).
I am totally new to that whole bluetooth thing, so I wanted to try out whether I can connect my bluetooth enabled cell phone with my Laptop. So I activated bluetooth on the phone and made it visible to other devices, but when my T61 searched for devices, it couldn't find anything.
So there is a lot of settings, I thought maybe I did something wrong, but everything seems correct. But then I thought, maybe both devices have to be visible. So I wanted to set my T61 to "Allow Bluetooth devices to find this computer" in Start -> Control Panel -> Bluetooth Devices -> Options.
But to my surprise when I click 'Apply' or 'OK', I get this error message:
Bluetooth Service Error
An error occurred while Windows was saving your settings. The
Bluetooth device might be unplugged.
The following settings were not saved:
Discoverability settings
Connection settings
How can the device be "unplugged" in a Laptop???
Maybe it's not even built in.
I am not really familiar with what is necessary to have bluetooth capability. When I look at the shipping itemization though, it seems there are multiple items needed.
Among many other entries the following lines were in the shipping listing (email):
62P6054 VBB INTEGR.BLUETOOTH PAN
42X1482 SBB BLUETOOTH W/ ANTENNA
42X1483 SBB BLUETOOTH SCREW
42V8654 SBB CL.PLATE T61WLAN BLTOOTH
These are the entries that sound like bluetooth.
(btw. What's a bluetooth screw, what's so special about it and what do I need it for?)
So, my brandnew T61 ought to have bluetooth capability, right?
But, maybe they forgot to put one of the components in. After all the fan was broken at arrival, not the best omen, I'm afraid.
How can I check, if Bluetooth is actually in the laptop?
Hope somebody can help me,
I don't want to call Lenovo and have some repair guy come over just to tell me how it's turned on.
Thanks,
MarkusK

Hi MarkusK, welcome to the forum,
I believe your T61 does have bluetooth. Have you turned bluetooth on using Fn F5. If BT has not been turned on I get exactly the same message you are describing. BT is turned off as standard setting, when you turn it on for the first time it will automatically load the necessary drivers - and away you go.
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

I think my ex has access to my Icloud, how can I check what devices has access to my Icloud?

I think my ex boyfirend has access to my Icloud and has his iphone connected to my Imessages. How can I check what devices are all on my ID?

YOu can try siging into icloud.com
But you should just change your icloud password.

How can I make my adodc connect faster to my SQL Server? It's taking a minute (so long) before I can view thousand of record in my listview.

How can I make my adodc connect faster to my SQL Server? It's taking a minute (so long) before I can view thousand of record in my listview. Please anyone help me.
I'm using this code:
Public Class McheckpaymentNew
Private cn As New ADODB.Connection
Private rs As New ADODB.Recordset
Private Sub McheckpaymentNew_Load(sender As Object, e As EventArgs) Handles MyBase.Load
Try
cn.ConnectionString = "DSN=database; UID=user; PWD=password"
cn.Open()
rs.CursorLocation = ADODB.CursorLocationEnum.adUseClient
rs.CursorType = ADODB.CursorTypeEnum.adOpenStatic
rs.LockType = ADODB.LockTypeEnum.adLockBatchOptimistic
Catch ex As Exception
MsgBox("Failed to Connect!, Please check your Network Connections, or Contact MIS Dept. for assistance.", vbCritical, "Error while Connecting to Database.."
End
End Try
End Sub
End Class

How can I make my adodc connect faster to my SQL Server? It's taking a minute (so long) before I can view thousand of record in my listview. Please anyone help me.
I'm using this code:
Public Class McheckpaymentNew
Private cn As New ADODB.Connection
Private rs As New ADODB.Recordset
Private Sub McheckpaymentNew_Load(sender As Object, e As EventArgs) Handles MyBase.Load
Try
cn.ConnectionString = "DSN=database; UID=user; PWD=password"
cn.Open()
rs.CursorLocation = ADODB.CursorLocationEnum.adUseClient
rs.CursorType = ADODB.CursorTypeEnum.adOpenStatic
rs.LockType = ADODB.LockTypeEnum.adLockBatchOptimistic
Catch ex As Exception
MsgBox("Failed to Connect!, Please check your Network Connections, or Contact MIS Dept. for assistance.", vbCritical, "Error while Connecting to Database.."
End
End Try
End Sub
End Class

How can i test my vpn connection?

so recently i decided to test if ver 1.3.0.3 of the quickvpn client would work better with the 1.3.0.5 rvs4000 firmware. i loaded quickvpn to an xp pro computer (freshly built, i might add) and got to work. in order to test the connection, i attempted to piggy back off an unsecured wireless network. this network is on the same ISP network as i am.
i use dynamic DNS, and the unsecured wireless network could resolve my IP correctly, but for some reason i couldnt connect to my home network from the unsecured network. my router is set to respond to lan requests, but i couldnt ping it. my router passes HTTP traffic to a computer in my network, but i couldnt bring up the webpage. finally, my router responds with the router config page over port 443, and i couldnt bring that up.
so i used my ISP's dialup service to test. initially, as always, i had a million problems with the vpn client. systematically, i tried to resolve the issues. i installed the patch in the readme for quickvpn. i checked log files to see where stuff was failing. eventually, i could connect to the VPN, but would get that "remote gateway is not responding" crap. i know of a (poor) workaround for this which allows you to "finalize" the connection, but that workaround doesnt allow you to ping around in your network. sometime later, after randomly messing with settings, the tunnel would connect without the workaround. i have no idea what "fixed" this.
despite all this, my 28.8Kbps connection wouldnt allow me to do anything meaningful on my network. i couldnt connect to the router or to a server of mine (http or fileshare). the only thing i could do was ping internal devices. other requests seemed to "hang" rather than timeout or do anything more concrete. basically, i gave up on testing using dialup, even though my router and the client software confirm a good connection. but i still wasnt convinced.
next, i figured i could create some type of "DMZ" on my network by placing a switch between my ISP's modem and my router. im not a cisco network professional by any means, but im pretty familiar with networking on a above-average level. that said, despite my best, i couldnt get my quickvpn computer to see my router from the "DMZ".
finally, i figured i could just test the tunnel while directly connected to my network's lan. bad idea. everything seems to go okay until it locks up on "activating policy". rebooting or otherwise ending the negotiation ends in the computer being unable to do anything anymore. when i try to ping anything, i get "negotiating ip security" ad infinitum. the only way i could fix this was by doing a system restore.
so here's the question: how can i test my quickvpn connection?why can't i just tunnel through my network? and before you scream that you can't, thegreenbow vpn client has NO PROBLEM connecting to my rvs4000 while connected to my own network.

Hi Aaron,
I am going exactly the same thing as you however, I had my cousin buy and install a RVS4000 at his house in Australia.
I access it from the USA so that I can help manage his Local Area Network, he is just not technical..
I setup a DDNS client on his RVS4000 so that I can always get to his Router via a domain name rather than a IP address.
I noticed that you didn't mention anything regarding importing client certificate into the directory of the VPN client on your PC.
I also noticed I disabled IPSec passthrough on the router in Australia, see the pictures below, not sure why, but the VPN client is working.
I also did not setup any gateway to gateway VPN tunnels, Only added a client , exported certificate as per the manual, See the last screen capture below.
You will also note if you view the screen captures that my cousins RVS4000 has not been upgraded to the new code.Is there a reason for that...not really...he's just a user, not really technical. Also note I have not added any VPN tunnels on my RVS4000.
I have a reasonably reliable connection between the USA and Australia. I didn;t have to play with any other options, just add users to the VPN client database.
Your description of the working environment of your PC is missing details on the version of XP, so i will mention the following taken from the software release notes of the RVS4000 ;
There is a known issue with Windows XP SP2 Firewall.
ICMP packets are always dropped by the firewall when the firewall is enabled.
This issue causes the QuickVPN client to be unable to establish a tunnel with the remote QuickVPN server successfully.
Microsoft has released a patch to fix this issue, which you can get from:
http://support.microsoft.com/kb/889527/en-us
After you install the patch, the issue should be resolved. You can also fix this issue by upgrading Windows XP to SP3.
You cannot plug a PC on the same network as the router for testing, they must be on dissimilar WAN networks for testing purposes.
Your remote PC VPN client will not be allocated a IP address in the RVS4000's network, hosts behind the RVS4000 will still respond to pings, as they direct the responses to their default gateway, the RVS4000.
The thegreenbow VPN client is a distracter at this point costing 50 something EURO for a license, lets try to get the quickVPN client working !
So, if you still wish try the following, firstly make sure your XP has been upgraded to SP3;
1. If you upgraded your router to the new version of code, then reset your router to factory defaults to re-initialize your router, yes start again.
2. Export the VPN client certificate to the directory that contains the VPN client. In my case it is;
"C:\Program Files\Cisco Small Business\QuickVPN Client"
3. add a VPN client account to the router
4. Use port 60443 from the quickVPN client. and try VPNing to the router.
5 hmmm, if the client still fails try disabling IPSec Passthrough on the router for grins and giggles.
If this fails, call the SBSC at the following location for resolution;
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
good luck ...regards Dave

HT5313 How can I check if my iMac has this update? OS X Lion v10.7.5 Update

How can I check if my iMac has this update? OS X Lion v10.7.5 Update

It's not technically challenging, but it isn't clearly necessary. In any case here's how:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

How can I create a database connection to Cloudscape database in 9iJDeveloper?

How can I create a database connection to Cloudscape database in
9iJDeveloper?
thanks.

Hi,
I assume you have a JDBC driver for Cloudscape.
1. In the IDE System Navigator, expand the Connections Node.
2. Right-click on the Database Connection and choose New
Connection .. .
3. Click pass the welcome screen.
4. In Step 1, name your connection and choose "3rd party JDBC
Driver"
5. Follow the rest of the steps and provide username/password,
class name and URL, test and you should be ready to go.
Good luck.

How can I check what version iOS my iPad 2 is using

how can I check what version iOS my ipad2 is using

Settings > General > About and it's in the Version field. It also shows on the Summary tab when connected to your computer's iTunes. The most up-to-date version is 4.3.5

How can I check a jdbc connection

Similar Messages

Maybe you are looking for