How can i check if a Final Cut Studio licence has been used or not?

Hello there,
How can i check if my 'Final Cut Studio 3 Retail' set has a usuable licence or they have been used allready? It is second hand and i no longer have a Mac and wish to sell the product. In the box it has 2 of the same serials so i gather it can be used twice?
Any help would greatly be appreciated
Kind Regards
Tim

If your serial is printed on the official sticker you will have no problems and should the new owner register it, any previous registrations will be deleted.
Officially you can only use it on one Desktop and one Laptop but there is no physical limit to the number of computers you can install it on.

Similar Messages

How do I change the color of font in a fillable form in Adobe Reader? How can I check if the writer of the document has given permission to edit color and not just add text?

How do I change the color of font in a fillable form in Adobe Reader? How can I check if the writer of the document has given permission to edit color and not just add text? Please help! I'm technologically challenged.

Most forms (99% or more) are created for simple text input, where you cannot change anything.
The creator of the form could allow Rich Text input (which allows you to change font, text size, color, etc.), but frankly I have never seen such a form, and I wouldn't know how they look. But I'm sure they would show some kind of controls to alter the text appearance.

I am trying to install Final cut pro studio V1.0.1 (2005) on OS X lion. I get a message "You can't open the application final cut studio.mpkg because power pc application are no longer supported

I am trying to install Final cut pro 5 studio V1.0.1 (2005) on OS X lion. I get a message "You can't open the application final cut studio.mpkg because power pc application are no longer supported. My computer is New. Is their a link I can go to get tech support?

You won't find any help at tech support ... other than telling you the facts: Intel processor Macs require FCP 5.1 or higher. FCP 5.0 and earlier were written for PowerPC processor Macs, long before Apple switched to using Intel processors.
And then there's the issue of the OS. OS 7 will allow FCP 7 (and sometimes even FCP 6) to work OK, but versions earlier than that have spotty operation on Lion.
Here's a brief history of full FCP versions and recommended OS compatibility:
* = requires PPC             ** = works with both PPC and Intel                          *** = require Intel
FCP 1.0*       OS 9
FCP 2.0*       OS 9
FCP 3.0*       OS 9, OS 10.1, OS 10.2
FCP 4.0*       OS 10.2, 10.3
FCP 4.5*       OS 10.3
FCP 5.0*       OS 10.3 (OS 10.4?)
FCP 5.1**     OS 10.4, 10.5
FCP 6.0**     OS 10.4, 10.5, 10.6 (OS 10.7?)
FCP 7.0***    OS 10.6, OS 10.7
FCP-X***       OS 10.6, OS 10.7
Essentially, you have a newer Intel processor Mac with a new OS and very old, incompatible software.   You might be able to find a used version of Final Cut Studio 3 on sites like ebay or craigslist as it is no longer offered by Apple as an upgrade.
Alternatively, you could purchase and download FCP-X, but it is an entirely different application, sharing virtually nothing with previous versions of FCP.
-DH

I Can't install my NEW Final Cut Studio 2

I Can't install my NEW Final Cut Studio 2;During the initial installation process the applications are dimmed and it tells me that I have to upgrade the previous version, but my "previous" version is Final Cut Studio "ACADEMIC" (FCP 5) which doesn't allow upgrades!. When I enter the previous version's serial # it refuses it and the serial # of the new one doesn't allow me to install. I paid full price for the new FCS2 because I am not elegible to upgrade from an "academic" version... Anyone with a solution... Urgent. I am to start a new project/new client on Monday am
thanks in advance

Did you uninstall the 1st version with AppZapper? Gotta be some registry type files still lingering around.
Thanks for your response.
I installed using the conventional DVD's sent by Apple. I installed them on my previous computer a MacBook Pro and it was copied with the rest of its contents when upgrading to my new MacPro.

How to Install Alpha Transitions into Final Cut Studio?

I downloaded the Alpha Transitions and now have a folder on the desktop named Alpha Transitions that has sub-folders. How do I install them in Final Cut Studio? I couldn't find any instructions.
Thanks for your help.

Since the transitions are just media, I keep them with the rest of my media used for editing; in a folder on my media drive.

Can I install my new Final Cut Studio 2 on more than one of my computers.

Can I install my new Final Cut Studio 2 on more than one of my computers.
I have a Power Mac G5 and I am buying a iMac 2.8 Intel 24"
Can I install my Final Cut Studio 2 on both computers?
The G5 I leave at home and the iMac I travel with.
Message was edited by: The Bunnell Farm

Hi The Bunnell Farm-
Greetings and welcome to the Apple boards.
Legally you must have only one copy installed at any one time on any one machine. By definition, you would need a second purchased copy in order to run it legally on the 2nd Mac.
Luck-
-DaddyPaycheck

How can I recover my deleted web history once it has been cleared?

in the Tools tab, there is a Clear Recent History function. In this, you can choose the time stipulant which you would like to be cleared... Once this is done, how can I recover the Recent history to see what has been browsed?

Once deleted it can not be recovered.

How can i find my ipod touch 5th g that has been stole (it does have icloud but it says that it needs internet connection) i dont know what to do now plz help

How can i find my ipod touch 5th g that has been stole (it does have icloud but it says that it needs internet connection) i dont know what to do now plz help

What To Do If Your iDevice or Computer Is Lost Or Stolen
If your Mac, iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T, Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. Lost or Stolen iPhone? Here’s What to do
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on MobileMe
3. OS X Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
Third-party solutions for computers:
1. VUWER 1.5.4
2. Sneaky ******* 0.2.0
3. Undercover 4.7
4. LoJack for Laptops Premium Mac
5. STEM 2.1
6. MacPhoneHome 3.5

How can I get alerts if a Wireless Access Point has been disconneted from the network?

How can I get alerts if a Wireless Access Point has been disconneted from the network?
Is it possible to get alerts via email from the WLC or WCS if Access-Point has been removed from the network?
Thanks in advance.

Hi,
The below link will answer ur question!!
http://www.cisco.com/en/US/docs/wireless/wcs/7.0/configuration/guide/7_0event.html#wp1229996
Please dont forget to rate the usefull posts!!
Regards
Surendra

How can i block an unwanted 12 digit number that has been constantly calling me?

how can i block an unwanted 12 digit number that has been constantly calling me? The number is >Number deleted<
Message was edited by: Verizon Moderator

Hi there irock2! I know how pesky those unwanted calls can become. Since the calls are not coming from a normal 10-digit American number, it may be someone international attempting to reach you. Our Usage Controls http://bit.ly/plz3pA feature offers the ability to block international calls, and even calls from private and restricted numbers. We also offer the option to change your number at no charge through My Verizon http://bit.ly/WJbRNG if you'd like.
Thank you
JenniferH_VZW
Please follow us on Twitter @vzwsupport

Where Can I find content for Final Cut Studio!

Hello,
I had final cut studio on my program but I didn't know that it came with content. I threw the box away. Is there a way where I can get those content for the programs?
Thanks

"But the truth is i got it" yes you did....off a bit torrent. The DVDs are packaged together, it's quite obvious that you illegally obtained a stripped copy. No one is going to fall for your scam, you have some nerve to come here and try and pull it off. Your elementary school english isn't convincing either. I hate to be a bit rude but you have to grow up. If you did actually have a copy you could just show apple your serial number sheet and they'd replace the missing software, but that isn't the case here is it? You have embarrassed yourself and you name here.
Mods please lock this!!!

Major meltdown - Can't seem to reinstall Final Cut Studio 6

Hello All,
My Final Cut stopped working. Specifically, it couldn't find the compressor application. I decided to "zero out" my MacBook Pro, and reinstall the operating system. I intended to then reinstall Final Cut Studio 6.
All went well with the "zero out" and reinstallation of the OS Mac OS X (10.4.11). However, when I attempt to reinstall FCP 6, after the first audio content 1 disc, the system asks for the reinsertion of the Final Cut Studio Install disc. I then get a message that the installation failed, and please try again.
Well, I've tried 5 times, and no success.
Can someone advise where to from here. I'm dead in the water.
Thank you.
DG

Namdoog wrote:
I was instructed to purchase the upgrade ($300), as it will only require my serial number, and I'm told my version will not be supported soon enough as the OS evolves.
While Apple may not be supporting FCP 6 any more, FCP 6 should definitely still install on your OS. You also should be aware that FCP 7 is not supported on OS X 10.4 so if you do choose to upgrade, you will need to also buy Leopard or Snow Leopard.

HT3866 How to locate original serial to Final Cut Studio, only have upgrade serial.

When rebuilding my system, Final Cut Studio lost serials, Soundtrack Pro asked for serial, I entered what came with my upgrade box set. It then said I needed to enter the original serial, which I no longer have. Any thoughts on how to obtain this? Big thanks.
Benjy

Try this: http://support.apple.com/kb/HT1861 It's old, but might be worth a try.
-DH

How long does installation take for final cut studio?

how long does final cut studio installation take?

MichelleSh wrote:
Hi, David,
Is it really that much faster to read an external drive than to read the CD drive? Up to 20 X faster? Or is it that something is seriously wrong with my CD drive?
thanks,
Michelle
External hard drives are 10x (more or less) faster than CD's/DVD's to read and write too. Is faster to rip a DVD/CD and put it on a hard drive and read/write from that file than it to read and write to a DVD/CD.
DVDs/CDs are old school for holding data and... Apple doesn't use them any more... Not to long you will see and end to DVDs/Cds (blu-ray too).

Hello. Can I install a Final Cut Studio 3 Upgrade package using a serial number from an old Final Cut Studio 1 package?

I would like to install Final Cut Studio 7 on my Macbook Pro (2012).
I may be able to get an upgrade package, which will mean I need a previous version of Final Cut Studio to install it. I have an old Macbook with Final Cut Studio 1 on it. Could I use the serial number from that version of Final Cut Studio to activate the new upgrade on a new computer?
Thanks,
Mark

Thank you Jim.

How can i check if a Final Cut Studio licence has been used or not?

Similar Messages

Maybe you are looking for