How can I check or set the Airport Express WAN port settings

I have a Netgear DG834G for ADSL connection with an Ethernet connection from the Netgear to a new (couple of months old) Airport Express. Performance for streaming and downloads has fallen significantly. On doing some problem diagnosis, I found that the Airport connection to the Netgear was showing as 10Mbps (an amber light), rather than 100Mbps. It should be 100Mbps (both devices support 10/100 Ethernet). I think the problem is with the Airport; I have tried different Ethernet cables and different Netgear ports. Other devices connect successfully at 100Mbps to the same port on the Netgear using the same cables.
Using the Airport utility I see no way to see any data about the Ethernet speed/duplex setting, nor any about how to configure manually.
Is there any way to do this?
Thanks for any advice here!

Unfortunately, there are no port settings available when the Express is configured in Bridge Mode, so no way to "test" things that way.
The Express should act just like a 10/100 Ethernet switch in Bridge Mode, so you may want to take the Express to an Apple Store or service shop to let them have a look if there is no other way for you to test the Express with the products that you have there.
If you want to experiment to test, you could temporarily configure the Express in router mode to see if the port behaves the same way. There are port adjustments in router mode, but I doubt that they will have any bearing on things when the Express is switched back to Bridge Mode.
The default mode is Automatic, which should work, but apparently does not. Try the 100 Mbps Full Duplex setting to see what happens.

Similar Messages

How can i check my setting details are correct on my iPhone I recevied an error when sending a text this morning and while checking it out noticed my state and city are wrong

How can i check my setting / about tab? This morning I got an error message say something wasn't safe (not sure what) I think it was my common name whcih is ch4iv.myvzw.com and while looking in there I noticed my state say NJ I live in PA, I did not buy my phone in NJ, the city says Bedminster I have never even been there. Can anyone advise?
Can't I go on my Apple account and get to my setting / details.

Here is the message...

How can I check and change the size of photo or doc in iPhone or any other app

How can I check and change the size of photo or doc in iPhone or any other app

You would need software form a third party to have this option. The free software that comes with the 8600 doesn't have an option for that. Vuescan is the only software I could find that says it works with your pritner and has a descreen option. You have to purchase it, but it will give you more advanced options than the software that came with the printer.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

HT1212 If I never synced to itunes and I restore the device. Will I lose unstored data? How can I check to see the last time my phone was backed up if I forgot the passcode to my phone?

If I never synced to itunes and I restore the device. Will I lose unstored data? How can I check to see the last time my phone was backed up if I forgot the passcode to my phone?

If you can't remember your passcode, you'll need to restore your phone. If you never synched to iTunes, all data on your phone will be erased. No way around this.

HT4061 my phone is unable to power on and i dont have the packaging how can i check what is the serial number of the phone

my phone is unable to power on and i dont have the packaging how can i check what is the serial number of the phone

Apple (and no one else) can not assist (with serial number or iCloud) in finding a lost or stolen iPad.
Report to police along with serial number. Change all your passwords.
These links may be helpful.
How to Track and Report Stolen iPad
http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
Reporting a lost or stolen Apple product
http://support.apple.com/kb/ht2526
What to do if your iOS device is lost or stolen
http://support.apple.com/kb/HT5668
iCloud: Locate your device on a map
http://support.apple.com/kb/PH2698
iCloud: Lost Mode - Lock and Trace
http://support.apple.com/kb/PH2700
iCloud: Remotely Erase your device
http://support.apple.com/kb/PH2701
Report Stolen iPad Tips and iPad Theft Prevention
http://www.stolen-property.com/report-stolen-ipad.php
How to recover a lost or stolen iPad
http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
How to Find a Stolen iPad
http://www.ehow.com/how_7586429_stolen-ipad.html
What NOT to do if your iPhone or iPad is lost or stolen
http://www.tomahaiku.com/what-not-to-do-if-your-iphone-or-ipad-lost-or-stolen/
Apple Product Lost or Stolen
http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
Oops! iForgot My New iPad On the Plane; Now What?
http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
How to Find Your iPad Serial Number
http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
http://support.apple.com/kb/HT4061
 Cheers, Tom

HT5035 how can i check or see the remaning balance that i have in my itunes account

how can i check or see the remaning balance that i have in my itunes account

On what device/computer?

HT1218 How can I make my first generation AirPort Express work with Mountain Lion? I have a 13" MacBook Pro (non-retina).

How can I make my first generation AirPort Express work with Mountain Lion? I have a 13" MacBook Pro (non-retina).

Hi guys, recently had the same issue. You require an older version of Airport Utility to configure the older Airport Express. It can be found here.
http://www.google.com/url?sa=t&rct=j&q=airport%20utility%205.6%20for%20lion&sour ce=web&cd=1&ved=0CFMQFjAA&url=http%3A%2F%2Fsupport.apple.com%2Fkb%2FDL1482&ei=Ip MBUPLwLoq42wW4puXMBA&usg=AFQjCNGOFUPMM0ZjsKeyj5CcL2oe9Eaf7A

How can I check and change the system set events trace level?

Dear all:
How can I check the system set events trace level? I don't want the alert_log so big.
Regards
Terry

Hi Terry;
Please check :
How to determine which system events are currently being set? [ID 845043.1]
How To List All The Named Events Set For A Database [ID 436036.1]
How to set EVENTS in the SPFILE [ID 160178.1]
Also check:
http://www.dba-oracle.com/t_grid_rac_events_in_Oracle.htm
http://www.akadia.com/services/ora_events.html
Hope it helps
Regard
Helios

HT1998 How can I administer a Gen 1 Airport Express from Airport Utility 6.3.2 (OS 10.9). I can see the base station but get the message: "This version of AirPort Utility doesn't support this base station. Go to AirPort Service and Support for more inform

How can I administer a Gen1 Airport Express from, my MacPro (OS 10.9, Airport Utility 6.3.2). I can see the Express in the WiFi window but from the Airport Utility I get the following message: " This version of AirPort Utility doesn’t support this base station. Go to AirPort Service and Support for more information." Of course there's nothing of value on the support page. Any clues anyone?

Apple has dropped support in Mavericks (10.9) of the AirPort Express and AirPort Extreme models that were discontinued more than six years ago.
You can still administer the older AirPort models if you have a Mac running Leopard, Snow Leopard, or a PC.

Can I attach USB drive to Airport Express USB port

I would like to attach a USB drive to my Apple airport Express USB port so that I can back up my data on my MBP and have my music stored on it for playing back over Apple TV.
Is there any issues to doing this? As an example, how would I see the drive?
thanks in advance.
Adam

Well, you can certainly attach a USB drive to the port on the AirPort Express.....but nothing will happen if you do this....since the USB port on the Express will only support a compatible printer and Keyspan remote control.
You will need an AirPort Extreme if you want to attach a shared hard drive to the USB port.

Is the Airport express Ethernet port input only?

I am thinking of the airport express to stream audio now that the iPad supports airplay, but am wondering if the ethernet port is useful. I think that the Airport can connect to my existing wifi, and I have the audio interface, so far so good! But I also have a gaming adapter that takes the wifi signal and outputs it through an ethernet cable to my DVR, I am wondering if I can redeploy the gaming adapter

If you configure current model the AirPort Express to "join" a wireless network for AirTunes/AirPlay, you can also enable the ethernet port if you wish so an ethernet device can connect. If you need more than one ethernet port for devices, you can attach an ethernet switch to the Express.

Can i connect external HD to Airport Express' USB port

and can connect a USB hub and use an external HD and a printer at the same time?

and can connect a USB hub and use an external HD and a printer at the same time?
No. The USB port on the AirPort Express Base Station (AX) will only support a single USB printer.

How can I more easily set the Key Photo for a face?

I know I can scrub across the face on the cork board to select, but this is completely unusable if you have more than 20 or 30 photos. By way of example: I have 1,700 photos of a person going back more than ten years. I want to choose a recent photo as the key. The order of the photos when you scrub is totally different than the order when you open the face. I can't right click -> set key photo or Photos -> Set Key Photo when I'm looking at the individual photos of that person.
Is scrub-and-select really the only way to do this? I know iPhoto lets you right-click -> set key photo after opening a specific face.

I'm replying only in case no-one else does. To the best of my knowledge, as you have found, the only way to select the face shown on the corkboard in Faces view is via the "skim-and-spacebar" method.
(Well, there is a second identical way: click the info button ("i") and skim-and-click.)
There is no parallel in Faces to the "Set key photo" command available for Projects.
Fwiw, the User Manual refers to the Faces key photo as the "Snapshot".
Feedback might be worthwhile: "Aperture→Provide Aperture Feedback".

Can't check ink levels with Airport Express

The manual for my brand new Epson printer says that I can not check ink levels if I print using Airport. I am wondering why. Is this a Mac OS problem or an Epson problem? If it's Apple's, is there a fix on the way? I can check ink levels only if I connect the printer directly to the computer. A bit of a pain.

Hoodtrunk:
I have several Epson printers and have the same issue. My understanding is that the print driver created by Epson does not support anything but printing over Airport. In my case I have an all-in-one unit and in addition to not being able to run the printer utility over Airport, I also cannot scan. I have to connect the printer to the Mac via USB for the scanning software to recognize it.
David

How can I configure one of the gateway NI9792 Ethernet port to communicate with a cRIO PAC ?

Hi NI Engineers,
I intend to use my gateway NI9792 the following way:
1. One Ethernet port for network connection. That's how I'll develop it, download software and monitor my application through my PC at my desk.
2. Can the other port be used to communicate with a cRIO device? If so, how can I do it?
It seems to be a stupid question, but I truly could not work this out!
Thanks in advance,
Luiz
"Together we stand, divided we fall..."
Certified LabVIEW Associate Developer
Solved!
Go to Solution.

Good afternoon, Luiz
Follow the first link to guide which module can be used and other links to the best part of bore configuration CRIO. Any questions please contact us.
How Do I Configure My Time Server on the NI WSN-9791 or NI 9792 Gateway?
http://digital.ni.com/public.nsf/allkb/44FA322FAFF8D58D862575BD00591A54?OpenDocument
NI WSN Product and Configuration Guide
http://zone.ni.com/devzone/cda/tut/p/id/8710
Configuring the Dual Ethernet Ports on Real-Time Controllers
http://digital.ni.com/public.nsf/allkb/67F94BB93BCE32CF86257367006B3659?OpenDocument
video setup and installation CRIO
http://www.ni.com/swf/demos/us/crio/outofbox/
Automatic Network Configuration for cRIO-9073 and cRIO-9074 CompactRIO Controllers
http://digital.ni.com/public.nsf/allkb/37C790309A210A748625757000570938?OpenDocument
Sincerely,
Mauro Vera.

How can I check or set the Airport Express WAN port settings

Similar Messages

Maybe you are looking for