How can i check rfc working in R3?

Hi,
how can i check that an RFC was executed in the RFc after Xi called r3?

Hi Mushon,
for example you can create a little test database and fill it.
Easier: take that code:
CALL FUNCTION 'SM02_ADD_MESSAGE'
EXPORTING
    MESSAGE                    = 'Module was called!'
   EXPIRATION_DATE            = SY-DATUM
   EXPIRATION_TIME            = '230000'
   DELETE_TIME                = '230000'.
If you execute any transaction in R/3 you get a little popup, that there is a message in your inbox.
Regards,
Udo

Similar Messages

Newbie to MAC-How can I check my .mac email from my work PC? Thanks!

Hi there. I am a new MAC user and not the brightes bulb with computers... how can I check my .mac email from my pc at work? Do I just go to mac.com? Thanks!

And look for the Mail link at the top of the page.
http://mail.mac.com or http://webmail.mac.com will also take you there directly.
Hope this helps! bill
1 GHz Powerbook G4 Mac OS X (10.4.8)

How can i check the dsp work properly on cisco 2851?

Hello all.
There are somthing wrong with voice gateway in our gateway.
One of the E1 channel can't make a call from local pod to remote pod.
PABX engineer told me, he tried to make a call manually seizing spefic one of the E1 channel using his digital phone to check E1 channel testing, he found some channel can't make a call.
He called the symtom as "lockout".
the logout status means, they can't make a call specific channel eventhough the channel not busy.
so i check the status of the gateway using "sh isdn services", but all channel are idle.
ISDN Se1/0/0:15, Channel [1-31]
Configured Isdn Interface (dsl) 0
Channel State (0=Idle 1=Proposed 2=Busy 3=Reserved 4=Restart 5=Maint_Pend)
Channel : 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
State : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Service State (0=Inservice 1=Maint 2=Outofservice 8=MaintPend 9=OOSPend)
Channel : 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
State : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
ISDN Se1/0/1:15, Channel [1-31]
Configured Isdn Interface (dsl) 1
Channel State (0=Idle 1=Proposed 2=Busy 3=Reserved 4=Restart 5=Maint_Pend)
Channel : 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
State : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Service State (0=Inservice 1=Maint 2=Outofservice 8=MaintPend 9=OOSPend)
Channel : 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
State : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
At that time, i had debug on local gateway.
I can't understand the cause code...and status
*Oct 18 18:40:59.815 KST: ISDN Se1/0/0:15 Q931: RX <- SETUP pd = 8 callref = 0x3202
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA9839C
Exclusive, Channel 28
Progress Ind i = 0x8183 - Origination address is non-ISDN
Calling Party Number i = 0x2180, '615861200'
Plan:ISDN, Type:National
Called Party Number i = 0x81, '9680100'
Plan:ISDN, Type:Unknown
Sending Complete
*Oct 18 18:40:59.823 KST: ISDN Se1/0/0:15 Q931: TX -> CALL_PROC pd = 8 callref = 0xB202
Channel ID i = 0xA9839C
Exclusive, Channel 28
*Oct 18 18:41:00.167 KST: ISDN Se1/0/0:15 Q931: TX -> ALERTING pd = 8 callref = 0xB202
*Oct 18 18:41:02.955 KST: ISDN Se1/0/0:15 Q931: TX -> CONNECT pd = 8 callref = 0xB202
*Oct 18 18:41:02.959 KST: ISDN Se1/0/0:15 Q931: TX -> DISCONNECT pd = 8 callref = 0xB202
Cause i = 0x80AC - Requested circuit/channel not available
*Oct 18 18:41:02.979 KST: ISDN Se1/0/0:15 Q931: RX <- CONNECT_ACK pd = 8 callref = 0x3202
*Oct 18 18:41:02.979 KST: ISDN Se1/0/0:15
**ERROR**: Ux_BadMsg: Invalid Message for call state 11, call id 0xD, call ref 0xB202, event 0xF
*Oct 18 18:41:02.979 KST: ISDN Se1/0/0:15 Q931: TX -> STATUS pd = 8 callref = 0xB202
Cause i = 0x80E20F - Message not compatible with call state or not implemented
Call State i = 0x0B
*Oct 18 18:41:03.039 KST: ISDN Se1/0/0:15 Q931: RX <- RELEASE pd = 8 callref = 0x3202
*Oct 18 18:41:03.039 KST: ISDN Se1/0/0:15 Q931: TX -> RELEASE_COMP pd = 8 callref = 0xB202
Voice gateway are connected NEC PBX and Nortel Meridian.
Problems occured both PBX systems.
I'm not sure the problem caused by PABX or Gateway.
How can i check it?
Regard,
john.

Hello.
Here is the partial configuration on gateway.
controller E1 1/0/0
framing NO-CRC4
pri-group timeslots 1-31
description << NEC NEAX-1 >>
controller E1 1/0/1
framing NO-CRC4
pri-group timeslots 1-31
description << NEC NEAX-2 >>
interface Serial1/0/0:15
no ip address
isdn switch-type primary-ntt
isdn protocol-emulate network
isdn incoming-voice voice
no cdp enable
interface Serial1/0/1:15
no ip address
isdn switch-type primary-ntt
isdn protocol-emulate network
isdn incoming-voice voice
no cdp enable
voice-port 1/0/0:15
no comfort-noise
busyout action shutdown
busyout monitor GigabitEthernet0/0
voice-port 1/0/1:15
no comfort-noise
busyout action shutdown
busyout monitor GigabitEthernet0/0
dial-peer voice 1 pots
description << A -> B >>
destination-pattern .T
no digit-strip
direct-inward-dial
port 1/0/0:15
dial-peer voice 2 pots
description << C -> B >>
destination-pattern .T
no digit-strip
direct-inward-dial
port 1/0/1:15
dial-peer voice 500 voip
description << 1586 >>
destination-pattern 1586....
session target ipv4:192.168.254.2
codec g711ulaw
no vad
dial-peer voice 501 voip
description << 1586 >>
preference 10
destination-pattern 1586....
session target ipv4:192.168.254.34
codec g711ulaw
no vad
Other dial-peers are omitted
dial-peer voice 7777 voip
description << Dummy Dial-peer for Codec Negotiation >>
incoming called-number .T
codec g711ulaw
no vad
Additionally, the NEC PBX was configuted it's isdn switch type ETSI.
But our gateway's isdn switch type is primary-ntt.
Regard,
john.

HT5019 how can I check if my lap top can work with Airplay

How can I check if my laptop supports Airplay

Open iTunes and turn on your Apple TV.
Turn on "Home Sharing" on both devices.
You'll see the Airplay icon in the iTunes window.
Airplay "mirroring" is not supported by your OS but Airplay via iTunes is.

I cannot access to my iTunes on my computer via my Apple Tv, but it works with my daughter's macbook, how can I make it work with my pc?

I use to be able to access all my music and videos on my iTunes via my Apple TV, but since a few months it hasn't work. My daughter tried with her computer and apple ID and it worked, but I want my Library to be accessible. I tried starting it over, rebooting it, but nothing seems to be working.
How can I make it work?
Thank you!

Check firewall and any security software installed on your system. Toggle off/on home sharing on your computer.

I have two email accounts. It is only letting me check one. How can I check the other?

I registered two different email accounts on my iPad mini. It's only letting me check one. How can I check the other one too?

Congratuations on your new iPad!
Since your device is so new, I can state categorically that this an issue with configuration. Delete the account that doesn't work, and enter the information anew.
If you're still having problems, check that your email address and password are correct, and if possible, verify it by checking your ISP's settings.

How can you check a different iCloud account in safari in an iPad?

How can you check a different iCloud account in safari in an iPad?

As currently designed, you cannot. Once iCloud detects you are on mobile Safari, it switches you to the iPad screen.
If you had another browser that would allow you to pretend you were a desktop Safari client, ie8 or 9, or Firefox, that might work.
But, Puffin and Opera mini don't work.
Gary

How can i access my old correspondense with old password in Mozilla Thunderbird? How can i check out from my password?

I had my website moved to other hosting. Accordingly, i changed a password, and when i checked in on my computer the first time with a new password, i stupidly checked the box "remember me on this computer", but i lost access to all my old emails that were laying in Thunderbird on my PC. How can i check out from the current password and log in with the old one so that i could access my old correspondense?

'''Pop mail accounts '''can only access the server Inbox.
Messages are downloaded to your computer and stored in the Thunderbird Profile mail account.
Usually, the copy on the server is removed unless you select to 'leave messages on server' in Account Settings..
'Tools' > 'Account Settings' > 'Server Settings' for pop mail account.
These emails are stored on your computer and can be accessed in both 'online' and 'offline' mode.
You would need to make sure you periodically create a backup of these emails.
'''IMAP mail accounts '''see a remote view of any subscribed folder on the server.
Subscribed folders download headers only and when you select to read an email, it is retrieved from the server and stored in a temporary cache to faciltate quick access to reading.
These emails are not stored in your Thunderbird profile folders on your computer, so would not be visible if you changed to 'offline' mode. They are stored on the server.
If you did not synchronise those subscribed folders then a copy was never stored in your Thunderbird profile imap mail account.
As you have modified the IMAP mail account and it is currently accessing the new hosting server, so cannot display anything on a different server, I would leave it alone because it is working just fine.
What you could try is to create a new IMAP mail account with server settings to the old host server using the old password.
File > New > exisitng mail account
Enter name, email address and password
click on 'Continue'
If you do manage to get access, then synchronise the subscribed folders to get a copy downloaded to Thunderbird Profile folders. As those folders are constantly updating to match the server, once you have the emails downloaded, go into 'offline' mode and move them into 'Local Folders'; you will need to make new folders in Local Folders account for those emails.
However, it is possible that you may not get access as that contract has ended. There is no obligation for the old host company to keep your emails if you do not have an account with them. In which case those emails will be lost.
After creating new imap mail account, if you get access do as advised to get emails into Local Folders, once emails are in Local folders you can remove/delete the imap mail account. If it does not work, you can delete the imap mail account.
Information on synchronising subscribed folders:
* https://support.mozilla.org/en-US/kb/imap-synchronization
Information on backup:
* http://kb.mozillazine.org/Profile_backup
* http://kb.mozillazine.org/IMAP_backup

How can I check email from 2 Apple IDs on my Mac?

Since recently, I can´t check my .me mail account any more on my Macbook any more.
I have 2 Apple IDs, and the main one is another email address (which I need, too). Therefore, I can´t access the .me email any more from my Mac.
Will I have to buy a Windows machine to check my Apple mail???
To be precise:
It DID work just fine for about 6 years, but recently it stopped working.
And it looks like the only way to change this in the settings, would be to lose all the settings, fotos, emails, calenders, ... from the other Apple ID - which I don´t want.
--> HOW can I check my .me email from my Macbook - WITHOUT logging off everything else???

...ok, that did not do the job either:
Whenever I did choose "other", as soon as I entered my Email address, it just switched back to my active iCloud account, not letting me continue.
Checking everything again and again, I just realized that both email addresses in question are already attached to my other Apple ID (the one I referred to as the active acct.), whereas the Apple ID in question does NOT have any Apple email address attached to it.
--> So it looks like I am actually getting all the Apple emails into one account - which is great.
--> I kind of see now why I can´t create another account there (considering that it would have to use one of the email addresses twice)
So I´m cool with Email now, I guess... thanks for your help!
But what about the notes that are attached to my secondary Apple ID?
Internet Accounts (in System prfs.) shows that I now have 2 iCloud Interent accounts. My "primary" acct., that has all the iCloud features, and another one without them - and it has "Email", and "Notes" unchecked (Contacts, Calender and the reminders are checked/activated).
Whenever I try to check the "notes" box in that account (still under System Prefs. / Internet Accounts), I am prompted for an iCloud Email to continue.
- Entering my (primary) icloud email does not work ("already taken" msg.)
- Choosing one from the drop down menu (suggestions) does not lead any further. All I get then is: "The program Notes can not be activated... please wait a moment and retry..."
- Making up a totally new one does not work either.
(same applies when I try to check the "Mail" box in order to activate Mail for that account)
Any ideas how I can go from here? Is there another way to create an iCloud Email (which apparently is needed to access my old notes)?
PS: I´m glad we found a way to communicate, the conversation with you has really helped me find the problem with my iCloud Email! It is frustrating when you feel you´re stuck and keep turning in circles...

How can i check the office web app server(wac client) is calling custom WOPI host?

I am getting an error when I testing my wopi host(which is the same as
example) with Office Web app server "Sorry, there was a problem and we can't open this document. If this happens again, try opening the document in Microsoft Word."
1-how can find the log files of this error?
2-how can i check the office web app server(wac client) is calling my WOPI host?
I am not sure about cumunication between owa to wopi host. I actually dont know how to implement checkfile and getfile functions to wopi host for waiting for call back from owa client.
Note:I am sure that office web app server is configured true. Because i test it with sharepoint 2013 and editing and viewing is working well.

Hi,
According to your post, my understanding is that
CheckFileInfo is how the WOPI application gets information about the file and the permissions a user has on the file. It should have a URL that looks like this:
HTTP://server/<...>/wopi*/files/<id>?access_token=<token>
While CheckFileInfo provides information about a file, GetFile returns the file itself. It should have a URL that looks like this:
HTTP://server/<...>/wopi*/files/<id>/contents?access_token=<token>
There is a great article for your reference.
http://blogs.msdn.com/b/officedevdocs/archive/2013/03/20/introducing-wopi.aspx
You can also refer to the following article which is about building an Office Web Apps(OWA) WOPI Host.
http://blogs.msdn.com/b/scicoria/archive/2013/07/22/building-an-office-web-apps-owa-wopi-host.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

How can I check for 'undefined'?

Hi,
I am creating a custom MP3 player where audio playback is
started by clicking on the title of the audio, but I also want to
be able to start play abck from the Play/Pause button. In order to
implement this dual approach, I am thinking of checking if a sound
has been loaded (with 'mySound.loadSound("path to sound") already
by the my titleButton.
I am thinking of doing this by checking the
'mySound.position' as that would be 'undefined' if there was no
sound loaded.
But how can I check it for being 'undefined', what woud be
the syntax? Itexpects a number so I tried -1, but that didn't work.
Or is there a better way?
Thx,
Nik
have a Play/Pause button and for it in order to

Found the answer.
The code is of course:
etc. //
if (mySound.position == undefined) {
// etc.
I had a erroe else where.
NIk

How can I check who changed a room number for an Asset?

Hi people!
I'm working as BASIS and in december we make a restore from production to another environment to make some test.. a user tell me that in transaction AS03 for an specific Asset number and company code the number of the room are diferent. For example he tell me that if he go to production and check the same asset for the same company code that he check in the test environment the room are diferents.. I think that maybe someone change it because 'is a restore'... I think that is imposible that this is caused by the restore.
Someone knows how can I check in some transaction or table who change this room number?
Thanks a lot for your help!!

As stated by Eli, only where there is approval process involving workflow for any changes to the master, then it will be stored temporarily, till the approval process completes.
If there is no approval process in the system (no workflow), them it immediate updates the database.
Regards,
Ravi

How can i check if a procedure exists in a certain database version

So today i became really frustrated after noticing that the Oracle SQL version on some computer I needed to work on was 10.1. The problem with that was that I needed a procedure called "xmlserialize". I browsed the documentation for it, but I didn't see anything like "since 11.0" or something similar.
So.. how can I see what is the first Oracle SQL version that supported some procedure?
For example, when I check a class definition for Java, I consult the javadoc :
http://docs.oracle.com/javase/7/docs/api/java/math/BigInteger.html
and there there's a field called "Since". For BigInteger ( it's just an example ), it says "Since: JDK1.1", so I know that if I'm using a JDK version earlier that 1.1, I won't have that class.
Is there some similar information for Oracle procedures/ functions/ features/ etc?

>
Let me be more explicit. I've searched for xmlserialize function.
The only place on the website that holds information regarding this function is this page:
>
To paraphrase sybrand - that's utter nonsense. I have never found only one reference to anything on the web.
Your question subject is
>
how can i check if a procedure exists in a certain database version
>
And since you said you were using 10.1 I searched for
>
oracle 10.1 xmlserialize
>
And the very first link on the search results is
>
What's New In Oracle XML DB?
http://docs.oracle.com/cd/B19306_01/appdev.102/b14259/whatsnew.htm
>
That link is for the XML Db Dev Guide for 10g Release 2
Would you like to guess what you find if you search for xmlserialize?
Right on the very first page is this
>
Oracle Database 10g Release 2 (10.2) New Features in Oracle XML DB
SQL/XML Standard Compliance (SQL:2005 Standard Part 14)
Support for the developing SQL/XML standard has been extended. The following SQL functions have been added: XMLPI, XMLComment, XMLRoot, XMLSerialize, XMLCDATA, and XMLParse. Escaping of identifiers has also been updated, in accordance with a change to the SQL/XML standard. See "Generating XML Using SQL Functions".
>
Did you notice the second sentence? I removed the clutter to make it easier to see.
>
The following SQL functions have been added: . . .XMLSerialize. . .
>
Fnding information can't get any easier than that.

How can I check and change the size of photo or doc in iPhone or any other app

How can I check and change the size of photo or doc in iPhone or any other app

You would need software form a third party to have this option. The free software that comes with the 8600 doesn't have an option for that. Vuescan is the only software I could find that says it works with your pritner and has a descreen option. You have to purchase it, but it will give you more advanced options than the software that came with the printer.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

How can I check off multiple boxes in my inbox of Yahoo mail?

How can I check off multiple boxes in my inbox of Yahoo mail? I think I've tried every possible keystroke combination. Using MacBook Pro OS10.8.2

I'm trying to select a lot of emails to delete, not all of them and not necessarily all in order. On my older mac I think it was shift click on any of the check boxes I was going to delete. So far I haven't found any combination that works. I did try control click and option click.

How can i check rfc working in R3?

Similar Messages

Maybe you are looking for