How can i check the condition of my iphone 4 battery?

Is there a way to check the condition of a battery in an iphone, to see the number of cycles and present capacity?

there are some apps in the app store but it's all statistics
a technology like batteries is soooo analogue the only thing the iphone have access to is
the volt level the batt can currently provide

Similar Messages

How can i check the last location of iphone when it was on?

I left my iphone in a taxi, but i found the taxi's home, i went to his home and i told him to give me back my iphone but he told me that he never seen iphone in his taxi.
the iphone was on when i left it in the taxi and it was still on till 4 hours after i left it, probably he found the iphone and went to his home so i just wanna check the last location of iphone, if it shows in his home area so i will be sure that he got the iphone and then i contact the police to take it back but otherwise i can not do anything cause he says i haven't found it.
plz plz help me

it was active when i lost it and i went to icloud website, but it shows offline. that means that it is off.
i just need to know if the iphone keeps recording of location where you go and how can i see the last location of iphone when it was on.

How can I check the percentage of my iPhone 5's original battery capacity?

I'm wondering if there's any way I can check what the capacity of my iPhone 5's battery is compared to its original capacity. I know Apple will replace the battery for free if it is under 50% of the original capacity since it's still covered under the one-year warranty but I'd rather know that's the case before I send it in and go without a phone for a week.

A problem does exist; it takes significantly less time for me to deplete my battery now than it did when I bought my phone. Please stop acting like this discussion is over just because you cannot answer my question. I would like to seek the knowledge of other regarding ways to check my battery capacity. I appreciate your suggestions, but I purchased an iPhone 5 because it was an upgrade to the iPhone 4 and it was supposed to have the same battery life. However, 20 months after I purchased my iPhone 4 the battery still lasted longer than the battery in my 11 month old iPhone 5. My warranty expires in a few weeks and I need to know now whether I should send it because once the warranty expires a battery replacement is going to set me back $80 plus shipping fees.

How can i check the file which is upload from the server

when upload the excel file from the server file to the internal table ,how can i check the data whether it accord with the required condition .
for example ,i want to upload the file which have the data whose type is pack, and it have three integer and two decimal ,how can i check in my code.
thanks,

Hi Sichen,
First upload the file, Then do ur validations and delete the records that doesn't satisfy ur requirements.
Thanks,
Vinod.

IP Job in BW finished, but how can I check the IDoc receive status in BW ?

Hi,experts
After I execute a Infopackage with loading more than 200000 records data, the infopackage monitor show me yellow light, 186020 from 200000 records. this infomation still show me till now, seaval hours,it looks pause here.
And I check the request in the R/3, the Job has finished. as you know it means the R/3 push the IDoc already finished.
and how can I do now ? or how can I check the IDoc receive status in BW side?

Hi,
I too had the same problem, i executed the following to solve the proble, may be this will help you:
1) Go to T-code SM58 and select TRFC and press F6,
2) For manual push of I-Docs, GO to T-COde BD87 select perticular idoc and see the status if it is not executed properly then do the manual push by pressing Execute option,
Thanks,

I have two email accounts. It is only letting me check one. How can I check the other?

I registered two different email accounts on my iPad mini. It's only letting me check one. How can I check the other one too?

Congratuations on your new iPad!
Since your device is so new, I can state categorically that this an issue with configuration. Delete the account that doesn't work, and enter the information anew.
If you're still having problems, check that your email address and password are correct, and if possible, verify it by checking your ISP's settings.

How can I select the condition one by one

I attaching a VI in which I have two condition less than or equal and greater than or equal. With respect to the input value 0f 125 the condition should be greater than or equal and if it is 175 then it should be less than or equal. So how can I exchange the conditions. Please reply
Attachments:
24.1.14 data acquisition reverse corrected-1.vi ‏116 KB

Hi perumpadapu,
Can you show me in your code where is this "175" and "125" is coming from? Where do you want to implement your flip logic?
" I need to relpace the greater than equal to to lesser than equal sign as the 175 becomes 125.So there should be a flip in conditions to be considered. "
If you want to do some sort of flip conditions based on the integer value received, you can use case structure as below:
Unless you are very certain that you will not receive any values other than 175 and 125, you can use Select.
"Becaus if i use case structure as you said, for the true as well as false case I have to include all these commands to execute in each case. I can't wire the both cases to the same case structure after that."
Can you provide a screenshot to this issue?
It would be great if you can explain what you want to do and what your code does.
Warmest regards,
Lennard.C
Learning new things everyday...

How can i check the office web app server(wac client) is calling custom WOPI host?

I am getting an error when I testing my wopi host(which is the same as
example) with Office Web app server "Sorry, there was a problem and we can't open this document. If this happens again, try opening the document in Microsoft Word."
1-how can find the log files of this error?
2-how can i check the office web app server(wac client) is calling my WOPI host?
I am not sure about cumunication between owa to wopi host. I actually dont know how to implement checkfile and getfile functions to wopi host for waiting for call back from owa client.
Note:I am sure that office web app server is configured true. Because i test it with sharepoint 2013 and editing and viewing is working well.

Hi,
According to your post, my understanding is that
CheckFileInfo is how the WOPI application gets information about the file and the permissions a user has on the file. It should have a URL that looks like this:
HTTP://server/<...>/wopi*/files/<id>?access_token=<token>
While CheckFileInfo provides information about a file, GetFile returns the file itself. It should have a URL that looks like this:
HTTP://server/<...>/wopi*/files/<id>/contents?access_token=<token>
There is a great article for your reference.
http://blogs.msdn.com/b/officedevdocs/archive/2013/03/20/introducing-wopi.aspx
You can also refer to the following article which is about building an Office Web Apps(OWA) WOPI Host.
http://blogs.msdn.com/b/scicoria/archive/2013/07/22/building-an-office-web-apps-owa-wopi-host.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

How can I check the expiration date of a Certificate Keychain from terminal?

Hello, I am writing a bash script to alert me when my corporate certificates are about to expire. How can I check the expiration date of a certificate in keychain? I'm running Mac OS 10.6.8 on a newer MacBook pro with full admin rights.
Specifically I will be checking three certs: a Root Authority, Issuing Authority, and a user cert (Identity).
I was exploring the Security and Openssl command line tools. But I can't seem to get the info I need.
Any recommendations would be appreciated.
Thank you!

Anyone?

How can I check the specs with a broken LCD?

A friend just gave me an ibook, but the LCD does not come on. How can I check the specs of the computer?
I tried hooking it up to an external monitor, but I believe I need to setup the prefs to show on the external (I.E. the external was just black, but the computer was on).
Any ideas here?
All I know about the computer is that it's a white ibook with dual USB ports, firewire, and eithernet port on the side.
Thanks in advance.
-brown
Message was edited by: Ryan Brown2

The specs for the iBook should be on the label with the serial number.
http://support.apple.com/kb/TA27282?viewlocale=en_US
What does it say there?

How can I check the version of the rdf file?

Dear all:
How can I check the version of the rdf file? such like CEXRECRE.rdf .
my environment is : oracle 11.5.9
platform : Linux red hat 4.0
Regards
Terry

Terry,
Use "adident" or "strings -a" commands -- See (Note: 125922.1 - How To Find Oracle Application File Versions) for details.
Thanks,
Hussein

How can I check the version of Oracle in Linux?

Dear all :
How can I check the version of Oracle in Linux ?
Regards
Terry

Hi terry;
How can I check the version of Oracle in Linux ?You mean your db version or something else? If you mean you want to control your version issue is:
source env file as oramgr
sqlplus "/as sysdba"
when u login sqlplus it will give u something as below:
SQL*Plus: Release 10.2.0.4.0 - Production on
Regard
Helios

How can i check the license file installed on the server CCM 6.1.4

Hi;
i have installed the CCM 6.1.4; and now i want to upgrade to 8.5, but i don't remenber witch type license i have uploaded ( normal or Hospitality).
how can i check the license file installed on this server???
thanks.

Hi Matthew,
I think your idea should work just fine, but you will need to work with;
[email protected]
To put together the proper license file due to this change called the "License MAC"
Customer Impact from New Licensing Procedures
Cisco Unified Communications Manager on VMware on Cisco UCS B-Series Blade Servers uses a different licensing model than Cisco Unified Communications Manager on an MCS server. The MAC address of the NIC card is no longer used to associate the license to the server.
Instead, the license gets associated to a license MAC, which is a 12 digit HEX value created by hashing the following parameters that you configure on the server:
•Time zone
•NTP server 1 (or "none")
•NIC speed (or "auto")
•Hostname
•IP Address (or "dhcp")
•IP Mask (or "dhcp")
•Gateway Address (or "dhcp")
•Primary DNS (or "dhcp")
•SMTP server (or "none")
•Certificate Information (Organization, Unit, Location, State, Country)
This hash of these fields is called the LICENSE MAC
Note : Once there is a change in any of the parameters that creates the License MAC, it will
give you 30 day grace period to generate a new license file for the CM based on new license
MAC.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/8_0_2/install/cmins802.html#wp584709
Cheers!
Rob

How can I check the open-mode of an opened file from the file refNum?

How can I check the open-mode of an opened file from the file refNum?
Especially whether a file is opened as read-only or write-only? I haven't found any VI in the panel with file VIs.
Thanks for any hints!

Check this post. Probably you can use a kernel.dll call.
http://forums.ni.com/t5/LabVIEW/file-date-created/m-p/109836

How can i check the procedure execution time..?

Hi All,
Can any one of you tell me how can i check the procedure execution time..?
Thanks in advance.

if running it from SQL*Plus,
SQL> set timing on
Or from PL/SQL, use DBMS_UTILITY.GET_TIME before and after the call and calclate the difference.

How can i check the condition of my iphone 4 battery?

Similar Messages

Maybe you are looking for