How can i check the data Of the phone and repar it

Thank you jeremy to replaying me , i forget to informe you,i already initialyze the phone, i am now how can i chek the data data of phone and repar the missing data(Read,write)
The data are Numbers.
i am new in Labview someone can help me withe sample.

I do this type of thing for a living, so I am restricted (by contract) in what I can say. Therefore this answer will be sufficiently general to help you get started but without doing the work for free.
Here goes;
You will have to find out at least three SETS of details.
1) Find out what physical interface to the phone is. By this I mean what type of connector do you need to plug into the phone, What type of signals are transfered back and forth, and how they are used.
2) Determine the protocol used. This is the actual commands and response that can be sent to the phone and are returned by it. Get all of the details.
3) Determine the what functionality is support by the phone that is usefull to you. This would be things liked, "How do
I get a list of all the numbers", how do I modify a number", etc.
I hope this helps,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Similar Messages

  • How can I check the age and the generation on an Apple tv?

    How can I check the age and the generation on an Apple tv?

    Welcome to the Apple Community.
    Models
    1st generation
    2nd generation
    3rd generation
    3rd generation Rev A
    Release date(s)
    January 9, 2007
    September 1, 2010
    March 7, 2012
    January 28, 2013
    Discontinued
    September 1, 2010
    March 7, 2012
    March 10, 2013[69]
    In production
    Model Number - Model ID - Order Number
    A1218 - AppleTV1,1 - MA711LL/A
    A1378 - AppleTV2,1 - MC572LL/A
    A1427 - AppleTV3,1 - MD199LL/A
    A1469 - AppleTV3,2 - MD199LL/A

  • I have lock iPhone 5 from Japan, i don't know from which carrier it  is belongs to currently I am in Saudi Araiba, how can i unlock the phone and use here)

    I have lock iPhone 5 from Japan, i don't know from which carrier it  is belongs to. currently I am in Saudi Arabia, how can i unlock the phone and use here)
    <Personal information edited by Host>

    You can't.

  • HT201412 If the on/off button at the top of my iphone stopped working, how can i shutdown the phone and rebot?

    If the on/off button at the top of my iphone stopped working, how can i shutdown the phone and rebot?

    Use Assistive Touch. Settings App > General > Accessibility > Assistive Touch > Device > Lock Screen. To turn OFF, hold down on the lock screen until slide to power off appears. To turn ON, connect iPhone to power, charger or USB port of computer.

  • I received an apple 5 from a colleague  he cannot be reached anymore, how can i use the phone and use it with my apple id ?

    I received an I phone 5 from a colleague
    He  is nowhere to be contacted
    I do not have his apple id
    How do I use this i phone without having his apple id
    I have my own apple id
    <Email Edited by Host>

    If the phone is Activation Locked (which it sounds like it is) the only thing you can do is contact the person who locked it. If you can't do that the phone is not usable as there is no way to bypass Activation Lock. The following has more information, including what to do if the person can be contacted. iCloud: Activation Lock

  • How can I check the expiration date of a Certificate Keychain from terminal?

    Hello, I am writing a bash script to alert me when my corporate certificates are about to expire. How can I check the expiration date of a certificate in keychain? I'm running Mac OS 10.6.8 on a newer MacBook pro with full admin rights.
    Specifically I will be checking three certs: a Root Authority, Issuing Authority, and a user cert (Identity).
    I was exploring the Security and Openssl command line tools. But I can't seem to get the info I need.
    Any recommendations would be appreciated.
    Thank you!

    Anyone?

  • How can i check the planned data vs actual data

    How can i check the planned data vs actual data with the infocubes?

    Hi Srinivas,
    You create one cube for plan data and create another cube for actual data.
    Create a multiprovider and give comparision report. this is betterway.
    Or you can also load actual and plan data in one cube but you need to maintain one character like version to seperate atual and plan data.This is not a good work.
    Regards,
    Vijay.

  • IP Job in BW finished, but how can I check the IDoc receive status in BW ?

    Hi,experts
    After I execute a Infopackage with loading more than 200000 records data, the infopackage monitor show me yellow light, 186020 from 200000 records. this infomation still show me till now, seaval hours,it looks pause here.
    And I check the request in the R/3, the Job has finished. as you know it means the R/3 push the IDoc already finished.
    and how can I do now ? or how can I check the IDoc receive status in BW side?

    Hi,
    I too had the same problem, i executed the following to solve the proble, may be this will help you:
    1) Go to T-code SM58 and select TRFC and press F6,
    2) For manual push of I-Docs, GO to T-COde BD87 select perticular idoc and see the status if it is not executed properly then do the manual push by pressing Execute option,
    Thanks,

  • How can i check the file  which is upload from  the server

    when upload the excel file from the server file to the internal table ,how can i check the data whether it accord with  the required condition .
    for example ,i want to upload the file which have the data whose type is pack, and it have three integer and  two decimal ,how can i check in my code.
    thanks,

    Hi Sichen,
    First upload the file, Then do ur validations and delete the records that doesn't satisfy ur requirements.
    Thanks,
    Vinod.

  • How can I check the open-mode of an opened file from the file refNum?

    How can I check the open-mode of an opened file from the file refNum?
    Especially whether a file is opened as read-only or write-only? I haven't found any VI in the panel with file VIs.
    Thanks for any hints!

    Check this post. Probably you can use a kernel.dll call.
    http://forums.ni.com/t5/LabVIEW/file-date-created/m-p/109836

  • How can i check the realtime ability of my program with LV 6.1?

    Hi, i did use a PXI-6053E daq card with Labview RT 6.0.3, after upgrading to
    LV 6.1 the single scan vi in my control loop displays no error, if i put too
    much stuff in the loop. i check data remaining, everything exactly as in
    the example i attached. With Labview 6.0.3 i did use the opcode "read
    oldest" all the time and got a "1" at data remaining output if runnig too
    slow. How can i check the realtime ability of my Program with LV 6.1? The
    attached example is running with 35kHz and green RT-LED, even if i put a
    "wait 1 ms" in the loop.
    Thx4help.
    Joerg
    [Attachment Optimized HW Timed Loop.llb, see below]
    Attachments:
    Optimized_HW_Timed_Loop.llb ‏242 KB

    You should still be able to use the data remaining output of AI SingleScan to indicate that you are maintaining real-time as you did in LabVIEW 6.0.3. If this is not working properly for you, you might try wiping out the ni-rt folder on the RT system and re-installing the RT software on it through MAX on your host computer. Check the versions you have. If you are still seeing data remaining = 0 even when you are running your loop significantly slower than your scan rate, you might want to contact the LabVIEW RT group at National Instruments for additional assistance.

  • How can i check the segment in idoc.

    hi gurus,
       how can i check the segment in idoc.please help me as

    Hi Rohit,
    In WE02/05 U can view the IDocs.
    Since u r having the IDoc with u, Double click the Idoc no. and it will take you to screen where it will show you all the segments of IDoc. Here you can check which segment is giving error.
    Go to  WE60/63 which shows the detailed documentation in the MySAP environments if u have been using the old 4.6c systems. In 6.10 since the documentation is not available ,modify your personal settings to show the documentation by default; In 6.10 in transactions WE60 and WE63, documentation is no longer generated by default for the segment fields when the documentation is generated. To activate the generation of the documentation from the corresponding data elements, proceed as follows: WE60/WE63. > Goto > User settings. Here you must set the indicator for 'Display of the documentation' under 'Display attributes for IDOC types' and then save the change. Now the documentation is also displayed for the segment fields when WE60/WE63 is executed.
    **Reward points if u find this useful.
    Thanks & Regards,
    gyanaraj

  • How  can i check the space in the field.

    hi:
    how  can i check the space in the field.!
    for example:
    data: string(30) type c value 'sent ence'.
    search  string for space.
    if sy-subrc = 0.
    write: 'i am right'.
    endif.
    but the result is that it cann't check the space.
    so how can check the space in the field!!
    thank you very much!

    Hi,
    data: v_string(30) type c value 'sent ence'.
    DATA : v_cnt TYPE I,
                v_num TYPE I  VALUE 1,
                v_num1 TYPE I.
    v_cnt =  strlrn( v_string ).
    DO v_cnt TIMES.
      IF v_string+v_num1(v_num)  EQ SPACE.
        write: 'i am right'.    
    ELSE.
       write: 'i am WRONG'.
      ENDIF.
      v_num1  =  v_num1 + 1. 
    ENDDO.

  • HT201363 My iPhone, iPad and iPod are all associated with the same Apple ID.  How can I remove the iPod and associate it with a new Apple ID without affecting the data on the other devices (note: there is no data on the iPod I want to keep)?

    My iPhone, iPad and iPod are all associated with the same Apple ID.  How can I remove the iPod and associate it with a new Apple ID without affecting the data on the other devices (note: there is no data on the iPod I want to keep)?

    Very simple.  Turn off Find my iDevice, then  Tap Settings, General, Erase, Erase all content and settings.

  • I have two email accounts. It is only letting me check one. How can I check the other?

    I registered two different email accounts on my iPad mini. It's only letting me check one. How can I check the other one too?

    Congratuations on your new iPad!
    Since your device is so new, I can state categorically that this an issue with configuration. Delete the account that doesn't work, and enter the information anew.
    If you're still having problems, check that your email address and password are correct, and if possible, verify it by checking your ISP's settings.

  • How can I check my passcode I updated today and when I am going to reset all content and setting my iPhone 4S they asked me for passcode when I entered the passcode the one I just update too is doesn't want to accept it

    how can I check my passcode I updated today and when I am going to reset all content and setting my iPhone 4S they asked me for passcode when I entered the passcode the one I just update too is doesn't want to accept it

    I have had the same problem with iPad recently not too sure why it happened but if you are completing a full reset anyway the easiest way is the restore via itunes on your computer and then set up a new passcode again. Resetting via itunes doesnt require a passcode so it should go straight through.
    Hope this helps

Maybe you are looking for