How can I check the date of purchase for my MacBook Pro?

I need to fill out a claim in order to get OS X Mountain Lion and I need the date of purchase. I have tried putting in the serial code under check your service and support coverage but it just gave me a vague statement thatit was purchased mid 2012. Could someone please tell me how I can check the date of purchase?

Well, correction, just checked mine...
Tells you exipry date of warranty, simply take 1 year off of this or 3 if you have AppleCare.
There is your purchase date.

Similar Messages

  • How can I download the latest Microsoft Office for my Macbook Air through the App Store?

    How can I download the latest Microsoft Office for my Macbook Air through the App Store?

    Welcome to Apple Support Communities
    Microsoft Office is not available in the App Store. Instead, you can purchase it in the Microsoft site > http://www.microsoft.com/mac
    Note that there are other apps that do the same, like Apple iWork (available in the Mac App Store) or LibreOffice, open-source and free. I recommend you to give LibreOffice a try.
    If you are interested in Office for Windows, you can find it in the Microsoft Store or at shops

  • I can't download the new java update for my macbook pro. I get a corrupt file message. Help!

    I can't download the new java update for my macbook pro. I get a corrupt file message. Help!

    "The new java Version 7 Update 13 is not exactly helpful in macbook pro.
    try the version 11 or 12 they should work perfectly."
    The OP is running 10.6.8 so Java 6 is his option at this point.
    For the OP try here:
    http://support.apple.com/kb/DL1573

  • How can i check the data Of the phone and repar it

    Thank you jeremy to replaying me , i forget to informe you,i already initialyze the phone, i am now how can i chek the data data of phone and repar the missing data(Read,write)
    The data are Numbers.
    i am new in Labview someone can help me withe sample.

    I do this type of thing for a living, so I am restricted (by contract) in what I can say. Therefore this answer will be sufficiently general to help you get started but without doing the work for free.
    Here goes;
    You will have to find out at least three SETS of details.
    1) Find out what physical interface to the phone is. By this I mean what type of connector do you need to plug into the phone, What type of signals are transfered back and forth, and how they are used.
    2) Determine the protocol used. This is the actual commands and response that can be sent to the phone and are returned by it. Get all of the details.
    3) Determine the what functionality is support by the phone that is usefull to you. This would be things liked, "How do
    I get a list of all the numbers", how do I modify a number", etc.
    I hope this helps,
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • How can i check the data Of the phone throug cpmputer

    I have a data in my computer, and i want to check the data of hand Phone, and if there are data missing to repar that data .(the data are numbers ).
    I am new in labview somone can help me

    This is not an easy thing to do. I just happened to be surfing the web for information about my nokia. Low and behold I came across a site devoted to hacking the phone. It had plans for cables and the basics of the communication protocol. The point I am trying to make is that you will need to surf the web for information about setting up communication to your phone. Each phone is different and each manufacturer can use whatever protocol they want. Once you have than info, we can then give you advice about implementing it in LabVIEW.

  • How can I tell if data was transferred to my MacBook Pro after the Migration Assistant process was stopped?

    I began Migration Assistant and after about 4hrs into the transfer I decided to quit. How do I find out if any data was transferred to my Macbook Pro from my Windows 7 pc?

    iMac Obsessed wrote:
    I've had my MacBook Pro Retina since the 17th and am only now realising that my firewall was not on. I've already connected to a network via ethernet at my job so that I can have access to the internet. How can I tell if my personal info is safe?
    As long as you are behind a router, you don't need to have your firewall turned on at all, in fact it probably slows your computer and/or internet connection down a bit. The only time you need it is to either protect yourself against intrusion from others on your local network or if you hook your computer directly to a cable / DSL modem. See Thomas Reed's Do I Need a Firewall?

  • How can I change the preferred WiFi network in my MacBook Pro

    How can I change the preferred order of networks on my MacBook Pro? There used to be one network at my office. Now there is a second higher speed wifi network also present which I would prefer to connect to, but the Macbook connects to the older one unless manually changed.

    Apple menu > System Preferences > Network > Advanced > Wi-Fi > Drag networks into the order you prefer.

  • If i tag a song in itunes how can i see the tags in finder on a macbook pro

    if i tag a song in itunes how can i see the tag in finder on a mcbook pro

    Those tags are not shown in the Finder.
    Metadata is generally displayed in the program designed to organize and display the content type, such as iTunes, iPhoto, etc.

  • How can we check the data already exists in database

    hi friends
    i am trying create one procedure to add customers in database with customer id as input parameter..but if in the database customer detail already exists than i would like to update that detail and if its not in the database than i would like to add that detail in the databse...how could i do this ...
    any help wpould be appreciate
    thanks
    rommy

    Hi,
    If your requirement is to insert in one table and if the record exists insert into other table the merge statement doesn't work
    Example (please check the column name and parameter names). I don't put commit or rollback because I don't know if you control the transaction inside this procedure or outside it.
    CREATE OR REPLACE PROCEDURE add_cust(I_CUST_ID        IN VARCHAR2,
                                         I_CUST_F_NAME    IN VARCHAR2,
                                         I_CUST_L_NAME    IN VARCHAR2,
                                         I_CUST_ADD       IN VARCHAR2,
                                         I_CUST_CITY      IN VARCHAR2,
                                         I_CUST_STATE     IN VARCHAR2,
                                         I_CUST_ZIP       IN VARCHAR2,
                                         I_CUST_DOB       IN DATE,
                                         I_CUST_          IN VARCHAR2,
                                         I_CUST_ACCT_TYPE IN VARCHAR2,
                                         I_START_BAL      IN NUMBER) IS
    BEGIN
       INSERT INTO CUSTOMERS C
          (CUST_ID,
           CUST_F_NAME,
           CUST_L_NAME,
           CUST_ADD,
           CUST_CITY,
           CUST_STATE,
           CUST_ZIP,
           CUST_DOB,
           CUST_)
       VALUES
          (I_CUST_ID,
           I_CUST_F_NAME,
           I_CUST_L_NAME,
           I_CUST_ADD,
           I_CUST_CITY,
           I_CUST_STATE,
           I_CUST_ZIP,
           I_CUST_DOB,
           I_CUST_);
    EXCEPTION
       WHEN DUP_VAL_ON_INDEX THEN
          INSERT INTO CUSTOMER_ACCT
             (CUST_ID,
              CUST_ACCT_NO,
              cust_acct_type)
          VALUES
             (I_CUST_ID,
              CUST_ACCT_SEQ.NEXTVAL, -- CUST_ACCT_SEQ is a sequence, isn't?
              I_CUST_ACCT_TYPE);
    END add_cust;Regards,

  • How can I check the data transfer rate of my FW800 port

    I have an iMac 2.4 20 inch (MB323LL/A) with a Lacie external rugged hard drive (320 GB). I have attached it using my FW800 port with the cable supplied with the drive.
    It seems slow to me so I was wondering if there is any way to see what the current data transfer is for a backup in progress. Of course it should be 800Mbps but is it really moving at that speed ? How can I tell what speed it is transferring at ? Can I use the same method for USB ports too ?

    When you move a large file, you are more likely to see a sustained transfer rate than a small file. Small files have to be individually read/write back and forth, thus slows the actual transfer rate down. If you are moving any file up to 4 GB and probably over 1 MB you'll see more realistic transfer rates. Furthermore your hard drive access time, and RPM figures into the equation too, as well as how much RAM you have. 800Mbps works out to 100 Megabytes per second under ideal conditions.

  • How can I get my data out of my broken Macbook Pro?

    My macbook pro was working weird for no reason at Friday, and it also cannot turn on at Saturday suddenly, I didn't have time to backup my laptop before it stop working. Is this a response of Apple to help me take my data out of my broken laptop? Even I am still covered by applecare, they told me I need pay for extra 99 dollars for backup my data to my external hard drive.

    What happens when you try to boot up?
    Troubleshooting: My computer won't turn on
    Can you boot into Target Disk Mode?
    How to use and troubleshoot FireWire target disk mode - Apple Support
    Yo may have to take the HD out, insert it into an external enclosure and then connect to another computer.

  • How can I adjust the contrast of video on my MacBook Pro Retina so they don't look like they were filmed with an old sock over the lens?

    I'd like to watch movies and TV shows, downloaded from iTunes or Amazon, on my MacBook Pro Retina, but they all look like they were filmed with an old sock over the lens. Daytime sequences look muddy, and night time sequences are incomprehensible with anything but the brightest objects rendered as black. I can watch the same files on my old MacBook Air and everything looks right, but no manner of tweaking seems to let me watch movies on my new machine.
    I've tried adjusting the gamma. It's a bit better when gammas is set to 1.0, but I can't seem to set a gamma less than one. I tried using the Accessibility Contrast control, but it just lowers the contrast, swallowing my desktop into the dark abyss. I tried Applecare, but they don't have a clue. I tried the Apple Store. The "genius" confirmed that it is indeed impossible to watch movies shot anywhere but in the brightest sunlight on a MacBook Pro Retina, and it isn't just my machine, but every similar model in the store. He arranged for someone who really understands color profiles to give me a call, but Apple seems to have dropped the ball on this.
    Is there some tool for stretching out the darker grays in Apple video? I don't want calibration. My impression is that my display, like the dozens I checked at the Apple Store are calibrated to make all dimmer grays appear completely black. I want uncalibration so I can actually see what is going on in the movies even if something is in a light shadow or shot at night. Hollywood has lots of trained technicians who can light and shoot night scenes that are quite comprehensible. I've watched a number of such scenes on my old MacBook Air. Now, I'd like to enjoy their artistry on my MacBook Pro Retina.

    http://www.ifixit.com/ has directions for do it yourself.  Also look at PRAM battery instructions, as sometimes this can fix optical drive issues.
    You can get external or internal drives from http://www.macsales.com/
    I also suggest in the future, take care of this problem while it is still under warranty. It may have cost you nothing.
    See this FAQ* on what may be at issue:
    http://www.macmaps.com/cdrfailure.html

  • How can I find the serial number of my stolen MacBook Pro?

    Hi,
    I had my 2009 Macbook Pro stolen about 10 months ago. I didn't think I'd see it again until last last it showed up on my "Find My Phone" App, in Vietnam.
    I locked it straight away and sent a message to the screen with my email address.
    The person who had it worked at a computer shop and contacted me straight away.
    He understands its stolen and wants to help but he will only give it to the police. And the Vietnamese police want my serial number to proove its mine before they will send it back to me.
    I don't have a copy of the recpiet or serial number. I've been to the iStudio where I bought it and thier records start 1 month after I purcahsed it.
    I've tried the https://supportprofile.apple.com page and for some reason my macbooks are not registered on there. All my other apple products are.
    Is there any other way I can retrieve my serial number?
    It's conected to the icloud and the app and I've made puchases on iTunes from it.
    Any help would be very much appreciated
    Many Thanks

    No.
    Barry

  • How can I sync the contacts from outlook on my macbook pro with my iPhone

    My iPhone 5 is backing up on iCloud and my music, etc is syncing through iTunes (11.4) on my MacBook Pro 2.5 GHz Intel Core i5 4GB 1600 MHz DDR3 but my calendar and contacts from Outlook 2011 are not syncing.  Does anyone know which settings I may need to change?  I have updated my operating system to OS X 10.9.4 and iTunes.

    You'll need to find a way to export your Outlook contacts and calendar to Apple's Contacts and Calendar applications. There are some paid software apps that can do this but I don't know of any free way other than exporting each event/contact individually. Outlook 2011, when it first came out, synced well with iCal and Address Book (or whatever it was called) but that's no longer the case... maybe when Office for Mac 2014 comes out?
    Sorry that I don't have an answer to what seems to be a common problem.
    Clinton
    MacBook Pro (15-inch Late 2011), OS X Mavericks 10.9.5, 16GB Crucial RAM, Crucial M500 960GB SSD, 27” Apple Thunderbolt Display

  • Where can i find the easy cap application for my macbook pro

    i need to connect my xbox 360 to my macbook pro i was told to buy the easy cap cord and plug it into my mac and then i have to download the app which i couldn't find at all i found one but after i downloaded it it didn't let me open it it says that this app is not supported by apple and some sort of thing which made me ****** off so much if you guys are facing the same problem and found out whats the solution let me know please

    By default it is here Applications > Utilities > Boot Camp Assistant on your computer. It is not on your dvd. It is named Boot Camp Assistant.app.

Maybe you are looking for