How can i check the last location of iphone when it was on?

I left my iphone in a taxi, but i found the taxi's home, i went to his home and i told him to give me back my iphone but he told me that he never seen iphone in his taxi.
the iphone was on when i left it in the taxi and it was still on till 4 hours after i left it, probably he found the iphone and went to his home so i just wanna check the last location of iphone, if it shows in his home area so i will be sure that he got the iphone and then i contact the police to take it back but otherwise i can not do anything cause he says i haven't found it.
plz plz help me

it was active when i lost it and i went to icloud website, but it shows offline. that means that it is off.
i just need to know if the iphone keeps recording of location where you go and how can i see the last location of iphone when it was on.

Similar Messages

How can I see the last location of a now dead ipod touch 4G that had find my iphone turned on?

How can I see the last location of a now dead ipod touch 4G that had find my iphone turned on? I can see my macbook but I cant see the last location of my ipod touch. I lost it a few weeks ago and figured it would show up. But it has not and I need it again for my job. Please help.

There is nothing you can do now. There are apps available from the app store that would give you that information if installed before it was lost/stolen.

How can i view the last location of my iPhone 24h after i lost it

Hey Guys,
i lost my iPhone and i'm not quite sure where to look for it
unfortunately (but logically by murphys law) it ran out of energy short after i lost it so i could not locate it with the "Where's my iPhone?" App. I've read that you can view the last location until 24h after it ran out of energy. Is there any posibility to see that position even after 24h? I was pretty dumb not to look up the position first so these 24 hours passed away before i could use that function.
I don't know if that matters:
The device is an iPhone 4.Gen iOS 6.1.4 with WiFi, 3G and GPS enabled when lost.
Thank you very much
Greetings from Germany!
BrightSeraph

I use FMiP from time to time and my experience is (when using the browser logged into icloud.com) a red message appears on the map indicating the last known position, but this seems to happen only when I very recently performed a search for the device and it was found. Otherwise, if no red notice appears, then you either find it now or get the message that it's unavailable. So if you don't get such a red message, I'd say icloud doesn't have a past location.

How can i remove the icloud from my iphone when i don't have the password?

I have a new iPhone where I restored from an old iPhone. The old iPhone had an iCloud account I hadn't used and I don't know the password. How can I remove the old iCloud account from my new iPhone? It keeps asking for the old password I don't have.

You won't be able to delted the existing account without the password. If you don't know it, you'll have to reset it as explained here: http://support.apple.com/kb/PH2617. If you have trouble doing this, you can try contacting the Apple account security team for your country for assistance: http://support.apple.com/kb/HT5699. You will have to prove your identity before they will reset the password.

How can I change the default location ipad/iphone pictures are stored in on my desktop?

So here's my dilemma. I have lightroom mobile on my ipad and iphone. Seamlessly, lightroom mobile pushes these images to my desktop and saves them in a folder in windows. I use an SSD and would prefer not doing read/writes to it that are unnecessary. What makes the default location problematic is that I can't seem to change it. Further, when I sync my ipad/iphone to my windows desktop using a cable, I will now have duplicates of images that were synced via lightroom mobile. So, it would be infinitely simpler, I think, if lightroom mobile would sync ipad/iphone images to a directory I specify, on a supplemental hard drive for instance, and using dates for folder names rather than some default directory on my main drive where they are just dumped.

Currently, Lightroom saves the images in a directory structure under a folder named "Mobile Downloads.lrdata", which is created in the same folder as the catalog file.
For example, an image will be saved as:
Windows = C:\Users\<username>\Pictures\Lightroom\Mobile Downloads.lrdata\<random hexadecimal name>\picture1.jpg
Mac = Users/<username>/Pictures/Lightroom/Mobile Downloads.lrdata/<random hexadecimal name>/picture1.jpg
you want to change the location of this "Mobile Downloads.lrdata" to another path.
You should file an Idea, AKA Feature Request, to the Feedback site:
http://feedback.photoshop.com/photoshop_family
If there is enough people voting for it, the Product Managers will evaluate it and eventually apply it to a future version.
It's your interest to advertise the Idea in order to increase the number of votes (I would vote for it).
There is another similar discussion in the forum (How do i change the location of 'Mobile Downloads.lrdata' ?), I am posting the same answer there.

How can I check the percentage of my iPhone 5's original battery capacity?

I'm wondering if there's any way I can check what the capacity of my iPhone 5's battery is compared to its original capacity. I know Apple will replace the battery for free if it is under 50% of the original capacity since it's still covered under the one-year warranty but I'd rather know that's the case before I send it in and go without a phone for a week.

A problem does exist; it takes significantly less time for me to deplete my battery now than it did when I bought my phone. Please stop acting like this discussion is over just because you cannot answer my question. I would like to seek the knowledge of other regarding ways to check my battery capacity. I appreciate your suggestions, but I purchased an iPhone 5 because it was an upgrade to the iPhone 4 and it was supposed to have the same battery life. However, 20 months after I purchased my iPhone 4 the battery still lasted longer than the battery in my 11 month old iPhone 5. My warranty expires in a few weeks and I need to know now whether I should send it because once the warranty expires a battery replacement is going to set me back $80 plus shipping fees.

How can i check the condition of my iphone 4 battery?

Is there a way to check the condition of a battery in an iphone, to see the number of cycles and present capacity?

there are some apps in the app store but it's all statistics
a technology like batteries is soooo analogue the only thing the iphone have access to is
the volt level the batt can currently provide

How can i check the iPad last logon time?

How can I check the last login on my ipad mini?

Log in to what? You don't log in to the Mini so I'm assuming you mean some service. Please explain which one.
Best of luck.

How can I get the last updated email address of the customer ??

Dear All,
Please let me know, How can I get the last updated email address of the customer ??
Also, I am trying to read CDHDR table where OBJECTCLAS is ADRESSE, however what value should be passed into OBJECTID field, looks like it is ADRNR with a Suffix BP.
Please confirm me what value should be passed into OBJECTID field.
Thank you.
Anitha

Hi Anitha,
Check if this is something that helps you:
Change documents in BAS
CDHDR
address type 1
objectclass = ADRESSE
objectid = addrgroup + addrnumber     (ADRC-ADDR_GROUP + ADDRNNUMBER) !!
                 'BP 000xxxxxx'
private address (address type 2)
objectclass = ADRESSE2
objectid = 'BP 000xxxxxx000yyyyyyy'
                        persnumber+adrnr private
address type 3
objectclass = ADRESSE3
objectid = 'BP 000xxxxxx000zzzzzzz'
                          persnumber +comp.address
The above details is from the link: http://wiki.sdn.sap.com/wiki/display/ERPLO/LO-MD-BP
Regards,
Swarna Munukoti

How can i check the license file installed on the server CCM 6.1.4

Hi;
i have installed the CCM 6.1.4; and now i want to upgrade to 8.5, but i don't remenber witch type license i have uploaded ( normal or Hospitality).
how can i check the license file installed on this server???
thanks.

Hi Matthew,
I think your idea should work just fine, but you will need to work with;
[email protected]
To put together the proper license file due to this change called the "License MAC"
Customer Impact from New Licensing Procedures
Cisco Unified Communications Manager on VMware on Cisco UCS B-Series Blade Servers uses a different licensing model than Cisco Unified Communications Manager on an MCS server. The MAC address of the NIC card is no longer used to associate the license to the server.
Instead, the license gets associated to a license MAC, which is a 12 digit HEX value created by hashing the following parameters that you configure on the server:
•Time zone
•NTP server 1 (or "none")
•NIC speed (or "auto")
•Hostname
•IP Address (or "dhcp")
•IP Mask (or "dhcp")
•Gateway Address (or "dhcp")
•Primary DNS (or "dhcp")
•SMTP server (or "none")
•Certificate Information (Organization, Unit, Location, State, Country)
This hash of these fields is called the LICENSE MAC
Note : Once there is a change in any of the parameters that creates the License MAC, it will
give you 30 day grace period to generate a new license file for the CM based on new license
MAC.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/8_0_2/install/cmins802.html#wp584709
Cheers!
Rob

How can I check the serial number in WM?

Dear Experts
I have a question: how can I check the serial number in WM? Like I want to know which storage type a serial number exist in. Is there a report can show this information? Currently I only can check the serial number at storage location level.
Please help. If there is no such a report, which table can I use for develpment?
Thanks a lot!
Tony

Hi Tony,
Unfortunatelly, you cannot manage serial numbers in bins with ERP WM. For this, you need to have a look to the new warehousing solution from SAP, I mean EWM (extended warehouse management) in SCM. There you can manage an see serial numbers in bins.
Rgds,
Philippe

TS3376 i have lost my iphone and have put it in lost mode. it says that i can trace the last 24 hours however it is only showing me where the phone was at 7 pm last night and it is grey mode... so obvoiously off how can i see the last 24 hours?

I have lost my iphone 3. I have placed it in Lost Mode however it is only showing my last location at 7 pm last night. How can i see the last 24 hours? it is in Grey so not on..

Find My iPhone only keeps a history of locations after you put it in lost mode. It also has to be online to provide an updated location.

IP Job in BW finished, but how can I check the IDoc receive status in BW ?

Hi,experts
After I execute a Infopackage with loading more than 200000 records data, the infopackage monitor show me yellow light, 186020 from 200000 records. this infomation still show me till now, seaval hours,it looks pause here.
And I check the request in the R/3, the Job has finished. as you know it means the R/3 push the IDoc already finished.
and how can I do now ? or how can I check the IDoc receive status in BW side?

Hi,
I too had the same problem, i executed the following to solve the proble, may be this will help you:
1) Go to T-code SM58 and select TRFC and press F6,
2) For manual push of I-Docs, GO to T-COde BD87 select perticular idoc and see the status if it is not executed properly then do the manual push by pressing Execute option,
Thanks,

I have two email accounts. It is only letting me check one. How can I check the other?

I registered two different email accounts on my iPad mini. It's only letting me check one. How can I check the other one too?

Congratuations on your new iPad!
Since your device is so new, I can state categorically that this an issue with configuration. Delete the account that doesn't work, and enter the information anew.
If you're still having problems, check that your email address and password are correct, and if possible, verify it by checking your ISP's settings.

How can we update the last synchronization date and time..on SUP in sccm 2012 R2

Hi,
Can you any one please guide me how can i update the last synchronization date & time in SUP on SCCM2012 r2 , some how its updated as future date and when ever i try to synch the SUP with disconnected WSUS its shows in the wsyncmgr.log
"Wakeup for a polling cycle " and " Wakeupby inbox drop" and "Wakeup by SCF change"
Thanks
Balaji K

You'll probably have to call CSS on this one as this not normal by any means. The messages you noted above are completely normal but if that's all you are seeing then there's an issue.
Have you reviewed wcm.log and wsusctrl.log?
Jason | http://blog.configmgrftw.com | @jasonsandys

How can i check the last location of iphone when it was on?

Similar Messages

Maybe you are looking for