How can i check the planned data vs actual data

How can i check the planned data vs actual data with the infocubes?

Hi Srinivas,
You create one cube for plan data and create another cube for actual data.
Create a multiprovider and give comparision report. this is betterway.
Or you can also load actual and plan data in one cube but you need to maintain one character like version to seperate atual and plan data.This is not a good work.
Regards,
Vijay.

Similar Messages

  • How can I check the expiration date of a Certificate Keychain from terminal?

    Hello, I am writing a bash script to alert me when my corporate certificates are about to expire. How can I check the expiration date of a certificate in keychain? I'm running Mac OS 10.6.8 on a newer MacBook pro with full admin rights.
    Specifically I will be checking three certs: a Root Authority, Issuing Authority, and a user cert (Identity).
    I was exploring the Security and Openssl command line tools. But I can't seem to get the info I need.
    Any recommendations would be appreciated.
    Thank you!

    Anyone?

  • IP Job in BW finished, but how can I check the IDoc receive status in BW ?

    Hi,experts
    After I execute a Infopackage with loading more than 200000 records data, the infopackage monitor show me yellow light, 186020 from 200000 records. this infomation still show me till now, seaval hours,it looks pause here.
    And I check the request in the R/3, the Job has finished. as you know it means the R/3 push the IDoc already finished.
    and how can I do now ? or how can I check the IDoc receive status in BW side?

    Hi,
    I too had the same problem, i executed the following to solve the proble, may be this will help you:
    1) Go to T-code SM58 and select TRFC and press F6,
    2) For manual push of I-Docs, GO to T-COde BD87 select perticular idoc and see the status if it is not executed properly then do the manual push by pressing Execute option,
    Thanks,

  • How can i check the file  which is upload from  the server

    when upload the excel file from the server file to the internal table ,how can i check the data whether it accord with  the required condition .
    for example ,i want to upload the file which have the data whose type is pack, and it have three integer and  two decimal ,how can i check in my code.
    thanks,

    Hi Sichen,
    First upload the file, Then do ur validations and delete the records that doesn't satisfy ur requirements.
    Thanks,
    Vinod.

  • How can I check the open-mode of an opened file from the file refNum?

    How can I check the open-mode of an opened file from the file refNum?
    Especially whether a file is opened as read-only or write-only? I haven't found any VI in the panel with file VIs.
    Thanks for any hints!

    Check this post. Probably you can use a kernel.dll call.
    http://forums.ni.com/t5/LabVIEW/file-date-created/m-p/109836

  • How can I check the age and the generation on an Apple tv?

    How can I check the age and the generation on an Apple tv?

    Welcome to the Apple Community.
    Models
    1st generation
    2nd generation
    3rd generation
    3rd generation Rev A
    Release date(s)
    January 9, 2007
    September 1, 2010
    March 7, 2012
    January 28, 2013
    Discontinued
    September 1, 2010
    March 7, 2012
    March 10, 2013[69]
    In production
    Model Number - Model ID - Order Number
    A1218 - AppleTV1,1 - MA711LL/A
    A1378 - AppleTV2,1 - MC572LL/A
    A1427 - AppleTV3,1 - MD199LL/A
    A1469 - AppleTV3,2 - MD199LL/A

  • How can i check the realtime ability of my program with LV 6.1?

    Hi, i did use a PXI-6053E daq card with Labview RT 6.0.3, after upgrading to
    LV 6.1 the single scan vi in my control loop displays no error, if i put too
    much stuff in the loop. i check data remaining, everything exactly as in
    the example i attached. With Labview 6.0.3 i did use the opcode "read
    oldest" all the time and got a "1" at data remaining output if runnig too
    slow. How can i check the realtime ability of my Program with LV 6.1? The
    attached example is running with 35kHz and green RT-LED, even if i put a
    "wait 1 ms" in the loop.
    Thx4help.
    Joerg
    [Attachment Optimized HW Timed Loop.llb, see below]
    Attachments:
    Optimized_HW_Timed_Loop.llb ‏242 KB

    You should still be able to use the data remaining output of AI SingleScan to indicate that you are maintaining real-time as you did in LabVIEW 6.0.3. If this is not working properly for you, you might try wiping out the ni-rt folder on the RT system and re-installing the RT software on it through MAX on your host computer. Check the versions you have. If you are still seeing data remaining = 0 even when you are running your loop significantly slower than your scan rate, you might want to contact the LabVIEW RT group at National Instruments for additional assistance.

  • How can i check the segment in idoc.

    hi gurus,
       how can i check the segment in idoc.please help me as

    Hi Rohit,
    In WE02/05 U can view the IDocs.
    Since u r having the IDoc with u, Double click the Idoc no. and it will take you to screen where it will show you all the segments of IDoc. Here you can check which segment is giving error.
    Go to  WE60/63 which shows the detailed documentation in the MySAP environments if u have been using the old 4.6c systems. In 6.10 since the documentation is not available ,modify your personal settings to show the documentation by default; In 6.10 in transactions WE60 and WE63, documentation is no longer generated by default for the segment fields when the documentation is generated. To activate the generation of the documentation from the corresponding data elements, proceed as follows: WE60/WE63. > Goto > User settings. Here you must set the indicator for 'Display of the documentation' under 'Display attributes for IDOC types' and then save the change. Now the documentation is also displayed for the segment fields when WE60/WE63 is executed.
    **Reward points if u find this useful.
    Thanks & Regards,
    gyanaraj

  • How  can i check the space in the field.

    hi:
    how  can i check the space in the field.!
    for example:
    data: string(30) type c value 'sent ence'.
    search  string for space.
    if sy-subrc = 0.
    write: 'i am right'.
    endif.
    but the result is that it cann't check the space.
    so how can check the space in the field!!
    thank you very much!

    Hi,
    data: v_string(30) type c value 'sent ence'.
    DATA : v_cnt TYPE I,
                v_num TYPE I  VALUE 1,
                v_num1 TYPE I.
    v_cnt =  strlrn( v_string ).
    DO v_cnt TIMES.
      IF v_string+v_num1(v_num)  EQ SPACE.
        write: 'i am right'.    
    ELSE.
       write: 'i am WRONG'.
      ENDIF.
      v_num1  =  v_num1 + 1. 
    ENDDO.

  • I have two email accounts. It is only letting me check one. How can I check the other?

    I registered two different email accounts on my iPad mini. It's only letting me check one. How can I check the other one too?

    Congratuations on your new iPad!
    Since your device is so new, I can state categorically that this an issue with configuration. Delete the account that doesn't work, and enter the information anew.
    If you're still having problems, check that your email address and password are correct, and if possible, verify it by checking your ISP's settings.

  • How can i check the office web app server(wac client) is calling custom WOPI host?

    I am getting an error when I testing my wopi host(which is the same as
    example) with Office Web app server "Sorry, there was a problem and we can't open this document.  If this happens again, try opening the document in Microsoft Word."
    1-how can find the log files of this error?
    2-how can i check the office web app server(wac client) is calling my WOPI host?
    I am not sure about cumunication between owa to wopi host. I actually dont know how to implement checkfile and getfile functions to wopi host for waiting for call back from owa client.
    Note:I am sure that office web app server is configured true. Because i test it with sharepoint 2013 and editing and viewing is working well.

    Hi,
    According to your post, my understanding is that
    CheckFileInfo is how the WOPI application gets information about the file and the permissions a user has on the file. It should have a URL that looks like this:
    HTTP://server/<...>/wopi*/files/<id>?access_token=<token>
    While CheckFileInfo provides information about a file, GetFile returns the file itself. It should have a URL that looks like this:
    HTTP://server/<...>/wopi*/files/<id>/contents?access_token=<token>
    There is a great article for your reference.
    http://blogs.msdn.com/b/officedevdocs/archive/2013/03/20/introducing-wopi.aspx
    You can also refer to the following article which is about building an Office Web Apps(OWA) WOPI Host.
    http://blogs.msdn.com/b/scicoria/archive/2013/07/22/building-an-office-web-apps-owa-wopi-host.aspx
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • How can I check the specs with a broken LCD?

    A friend just gave me an ibook, but the LCD does not come on. How can I check the specs of the computer?
    I tried hooking it up to an external monitor, but I believe I need to setup the prefs to show on the external (I.E. the external was just black, but the computer was on).
    Any ideas here?
    All I know about the computer is that it's a white ibook with dual USB ports, firewire, and eithernet port on the side.
    Thanks in advance.
    -brown
    Message was edited by: Ryan Brown2

    The specs for the iBook should be on the label with the serial number.
    http://support.apple.com/kb/TA27282?viewlocale=en_US
    What does it say there?

  • How can I check the version of the rdf file?

    Dear all:
    How can I check the version of the rdf file? such like CEXRECRE.rdf .
    my environment is : oracle 11.5.9
    platform : Linux red hat 4.0
    Regards
    Terry

    Terry,
    Use "adident" or "strings -a" commands -- See (Note: 125922.1 - How To Find Oracle Application File Versions) for details.
    Thanks,
    Hussein

  • How can I check the version of Oracle in Linux?

    Dear all :
    How can I check the version of Oracle in Linux ?
    Regards
    Terry

    Hi terry;
    How can I check the version of Oracle in Linux ?You mean your db version or something else? If you mean you want to control your version issue is:
    source env file as oramgr
    sqlplus "/as sysdba"
    when u login sqlplus it will give u something as below:
    SQL*Plus: Release 10.2.0.4.0 - Production on
    Regard
    Helios

  • How can i check the license file installed on the server CCM 6.1.4

    Hi;
    i have installed the CCM 6.1.4; and now i want to upgrade to 8.5, but i don't remenber witch type license i have uploaded ( normal or Hospitality).
    how can i check the license file installed on this server???
    thanks.

    Hi Matthew,
    I think your idea should work just fine, but you will need to work with;
    [email protected]
    To put together the proper license file due to this change called the "License MAC"
    Customer Impact from New Licensing Procedures
    Cisco Unified Communications Manager on VMware on Cisco UCS B-Series Blade Servers uses a different licensing model than Cisco Unified Communications Manager on an MCS server. The MAC address of the NIC card is no longer used to associate the license to the server.
    Instead, the license gets associated to a license MAC, which is a 12 digit HEX value created by hashing the following parameters that you configure on the server:
    •Time zone
    •NTP server 1 (or "none")
    •NIC speed (or "auto")
    •Hostname
    •IP Address (or "dhcp")
    •IP Mask (or "dhcp")
    •Gateway Address (or "dhcp")
    •Primary DNS (or "dhcp")
    •SMTP server (or "none")
    •Certificate Information (Organization, Unit, Location, State, Country)
    This hash of these fields is called the LICENSE MAC
    Note : Once there is a change in any of the parameters that creates the License MAC, it will
    give you 30 day grace period to generate a new license file for the CM based on new license
    MAC.
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/8_0_2/install/cmins802.html#wp584709
    Cheers!
    Rob

Maybe you are looking for