How can i check the realtime ability of my program with LV 6.1?

Hi, i did use a PXI-6053E daq card with Labview RT 6.0.3, after upgrading to
LV 6.1 the single scan vi in my control loop displays no error, if i put too
much stuff in the loop. i check data remaining, everything exactly as in
the example i attached. With Labview 6.0.3 i did use the opcode "read
oldest" all the time and got a "1" at data remaining output if runnig too
slow. How can i check the realtime ability of my Program with LV 6.1? The
attached example is running with 35kHz and green RT-LED, even if i put a
"wait 1 ms" in the loop.
Thx4help.
Joerg
[Attachment Optimized HW Timed Loop.llb, see below]
Attachments:
Optimized_HW_Timed_Loop.llb ‏242 KB

You should still be able to use the data remaining output of AI SingleScan to indicate that you are maintaining real-time as you did in LabVIEW 6.0.3. If this is not working properly for you, you might try wiping out the ni-rt folder on the RT system and re-installing the RT software on it through MAX on your host computer. Check the versions you have. If you are still seeing data remaining = 0 even when you are running your loop significantly slower than your scan rate, you might want to contact the LabVIEW RT group at National Instruments for additional assistance.

Similar Messages

How can i check the planned data vs actual data

How can i check the planned data vs actual data with the infocubes?

Hi Srinivas,
You create one cube for plan data and create another cube for actual data.
Create a multiprovider and give comparision report. this is betterway.
Or you can also load actual and plan data in one cube but you need to maintain one character like version to seperate atual and plan data.This is not a good work.
Regards,
Vijay.

IP Job in BW finished, but how can I check the IDoc receive status in BW ?

Hi,experts
After I execute a Infopackage with loading more than 200000 records data, the infopackage monitor show me yellow light, 186020 from 200000 records. this infomation still show me till now, seaval hours,it looks pause here.
And I check the request in the R/3, the Job has finished. as you know it means the R/3 push the IDoc already finished.
and how can I do now ? or how can I check the IDoc receive status in BW side?

Hi,
I too had the same problem, i executed the following to solve the proble, may be this will help you:
1) Go to T-code SM58 and select TRFC and press F6,
2) For manual push of I-Docs, GO to T-COde BD87 select perticular idoc and see the status if it is not executed properly then do the manual push by pressing Execute option,
Thanks,

I have two email accounts. It is only letting me check one. How can I check the other?

I registered two different email accounts on my iPad mini. It's only letting me check one. How can I check the other one too?

Congratuations on your new iPad!
Since your device is so new, I can state categorically that this an issue with configuration. Delete the account that doesn't work, and enter the information anew.
If you're still having problems, check that your email address and password are correct, and if possible, verify it by checking your ISP's settings.

How can i check the office web app server(wac client) is calling custom WOPI host?

I am getting an error when I testing my wopi host(which is the same as
example) with Office Web app server "Sorry, there was a problem and we can't open this document. If this happens again, try opening the document in Microsoft Word."
1-how can find the log files of this error?
2-how can i check the office web app server(wac client) is calling my WOPI host?
I am not sure about cumunication between owa to wopi host. I actually dont know how to implement checkfile and getfile functions to wopi host for waiting for call back from owa client.
Note:I am sure that office web app server is configured true. Because i test it with sharepoint 2013 and editing and viewing is working well.

Hi,
According to your post, my understanding is that
CheckFileInfo is how the WOPI application gets information about the file and the permissions a user has on the file. It should have a URL that looks like this:
HTTP://server/<...>/wopi*/files/<id>?access_token=<token>
While CheckFileInfo provides information about a file, GetFile returns the file itself. It should have a URL that looks like this:
HTTP://server/<...>/wopi*/files/<id>/contents?access_token=<token>
There is a great article for your reference.
http://blogs.msdn.com/b/officedevdocs/archive/2013/03/20/introducing-wopi.aspx
You can also refer to the following article which is about building an Office Web Apps(OWA) WOPI Host.
http://blogs.msdn.com/b/scicoria/archive/2013/07/22/building-an-office-web-apps-owa-wopi-host.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

How can I check the expiration date of a Certificate Keychain from terminal?

Hello, I am writing a bash script to alert me when my corporate certificates are about to expire. How can I check the expiration date of a certificate in keychain? I'm running Mac OS 10.6.8 on a newer MacBook pro with full admin rights.
Specifically I will be checking three certs: a Root Authority, Issuing Authority, and a user cert (Identity).
I was exploring the Security and Openssl command line tools. But I can't seem to get the info I need.
Any recommendations would be appreciated.
Thank you!

Anyone?

How can I check the specs with a broken LCD?

A friend just gave me an ibook, but the LCD does not come on. How can I check the specs of the computer?
I tried hooking it up to an external monitor, but I believe I need to setup the prefs to show on the external (I.E. the external was just black, but the computer was on).
Any ideas here?
All I know about the computer is that it's a white ibook with dual USB ports, firewire, and eithernet port on the side.
Thanks in advance.
-brown
Message was edited by: Ryan Brown2

The specs for the iBook should be on the label with the serial number.
http://support.apple.com/kb/TA27282?viewlocale=en_US
What does it say there?

How can I check the version of the rdf file?

Dear all:
How can I check the version of the rdf file? such like CEXRECRE.rdf .
my environment is : oracle 11.5.9
platform : Linux red hat 4.0
Regards
Terry

Terry,
Use "adident" or "strings -a" commands -- See (Note: 125922.1 - How To Find Oracle Application File Versions) for details.
Thanks,
Hussein

How can I check the version of Oracle in Linux?

Dear all :
How can I check the version of Oracle in Linux ?
Regards
Terry

Hi terry;
How can I check the version of Oracle in Linux ?You mean your db version or something else? If you mean you want to control your version issue is:
source env file as oramgr
sqlplus "/as sysdba"
when u login sqlplus it will give u something as below:
SQL*Plus: Release 10.2.0.4.0 - Production on
Regard
Helios

How can i check the file which is upload from the server

when upload the excel file from the server file to the internal table ,how can i check the data whether it accord with the required condition .
for example ,i want to upload the file which have the data whose type is pack, and it have three integer and two decimal ,how can i check in my code.
thanks,

Hi Sichen,
First upload the file, Then do ur validations and delete the records that doesn't satisfy ur requirements.
Thanks,
Vinod.

How can i check the license file installed on the server CCM 6.1.4

Hi;
i have installed the CCM 6.1.4; and now i want to upgrade to 8.5, but i don't remenber witch type license i have uploaded ( normal or Hospitality).
how can i check the license file installed on this server???
thanks.

Hi Matthew,
I think your idea should work just fine, but you will need to work with;
[email protected]
To put together the proper license file due to this change called the "License MAC"
Customer Impact from New Licensing Procedures
Cisco Unified Communications Manager on VMware on Cisco UCS B-Series Blade Servers uses a different licensing model than Cisco Unified Communications Manager on an MCS server. The MAC address of the NIC card is no longer used to associate the license to the server.
Instead, the license gets associated to a license MAC, which is a 12 digit HEX value created by hashing the following parameters that you configure on the server:
•Time zone
•NTP server 1 (or "none")
•NIC speed (or "auto")
•Hostname
•IP Address (or "dhcp")
•IP Mask (or "dhcp")
•Gateway Address (or "dhcp")
•Primary DNS (or "dhcp")
•SMTP server (or "none")
•Certificate Information (Organization, Unit, Location, State, Country)
This hash of these fields is called the LICENSE MAC
Note : Once there is a change in any of the parameters that creates the License MAC, it will
give you 30 day grace period to generate a new license file for the CM based on new license
MAC.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/8_0_2/install/cmins802.html#wp584709
Cheers!
Rob

How can I check the open-mode of an opened file from the file refNum?

How can I check the open-mode of an opened file from the file refNum?
Especially whether a file is opened as read-only or write-only? I haven't found any VI in the panel with file VIs.
Thanks for any hints!

Check this post. Probably you can use a kernel.dll call.
http://forums.ni.com/t5/LabVIEW/file-date-created/m-p/109836

How can i check the procedure execution time..?

Hi All,
Can any one of you tell me how can i check the procedure execution time..?
Thanks in advance.

if running it from SQL*Plus,
SQL> set timing on
Or from PL/SQL, use DBMS_UTILITY.GET_TIME before and after the call and calclate the difference.

How can I check the billing address on file for me at iTunes?

i received an email stating a change in my billing address. I did not make a change. How can I check the address on file?

You can viee the billions my address on your account by logging into the accontunt's nt via the Store > View Account menu option on your computer's iTunes, or via the 'manage your apple id' button on http://appleid.apple.com
But the email may be a phishing email : Identifying fraudulent "phishing" email
t

How can I check the price of upgrading CS5 educational edition to CS6 educational edition?

How can I check the price of upgrading
"Adobe Creative Suite 5 Design Premium Student and Teacher Edition" to
"Adobe Creative Suite 6 Design & Web Premium Student and Teacher Edition"?
Accroding to http://www.adobe.com/hk_en/products/cs6/faq.html , "owners of a CS5 or CS5.5 suite edition qualify for upgrade pricing to a CS6 suite edition."
I can only found the price for CS6 full version from the site. But I can't found the upgrade price. Where can I check the upgrade price?
Thanks.

There are no upgrades for edu products. You simply buy a complete new license at the discounted price.
Mylenium

How can i check the realtime ability of my program with LV 6.1?

Similar Messages

Maybe you are looking for