How can i check the unzip file has finished unzip process?

i am using 7zip to unzip the file. java program can check the unzip file has finished unzip process?
Edited by: rayray2008 on Feb 12, 2008 7:14 PM

Downloading and burning Linux or Windows ISO images for example with a single flipped bit can cause system instability nearly impossible to track down, and not otherwise detectable. An MD5 checksum (OR SHA) check will quickly detect any such transmission errors. Not something anyone I know bothers to use unless it's important data. The temporary fix of changing the about:config setting, then expanding to full screen in downloads was working. But now, based on my interpretation of comments made on the authors Sourceforge page, Firefox has made updates that prevent the MD5 Reborned Hasher from working in Firefox at all. If that's true, I would really like to know the reason. With all this talk of NSA spying, I would think more people would be interested in making sure someone isn't tampering with their downloads. I have no idea. But I do believe the wonderful volunteers at Firefox need to figure out a way to make this valuable piece of security software whole again. Thank You.
PS: For those needing to verify a file, you might want to try the "Microsoft File Checksum Integrity Verifier" kb841290 . It's old, but does large file MD5 from a command prompt.

Similar Messages

How can i check the license file installed on the server CCM 6.1.4

Hi;
i have installed the CCM 6.1.4; and now i want to upgrade to 8.5, but i don't remenber witch type license i have uploaded ( normal or Hospitality).
how can i check the license file installed on this server???
thanks.

Hi Matthew,
I think your idea should work just fine, but you will need to work with;
[email protected]
To put together the proper license file due to this change called the "License MAC"
Customer Impact from New Licensing Procedures
Cisco Unified Communications Manager on VMware on Cisco UCS B-Series Blade Servers uses a different licensing model than Cisco Unified Communications Manager on an MCS server. The MAC address of the NIC card is no longer used to associate the license to the server.
Instead, the license gets associated to a license MAC, which is a 12 digit HEX value created by hashing the following parameters that you configure on the server:
•Time zone
•NTP server 1 (or "none")
•NIC speed (or "auto")
•Hostname
•IP Address (or "dhcp")
•IP Mask (or "dhcp")
•Gateway Address (or "dhcp")
•Primary DNS (or "dhcp")
•SMTP server (or "none")
•Certificate Information (Organization, Unit, Location, State, Country)
This hash of these fields is called the LICENSE MAC
Note : Once there is a change in any of the parameters that creates the License MAC, it will
give you 30 day grace period to generate a new license file for the CM based on new license
MAC.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/install/8_0_2/install/cmins802.html#wp584709
Cheers!
Rob

How can I check the version of the rdf file?

Dear all:
How can I check the version of the rdf file? such like CEXRECRE.rdf .
my environment is : oracle 11.5.9
platform : Linux red hat 4.0
Regards
Terry

Terry,
Use "adident" or "strings -a" commands -- See (Note: 125922.1 - How To Find Oracle Application File Versions) for details.
Thanks,
Hussein

How can i check the file which is upload from the server

when upload the excel file from the server file to the internal table ,how can i check the data whether it accord with the required condition .
for example ,i want to upload the file which have the data whose type is pack, and it have three integer and two decimal ,how can i check in my code.
thanks,

Hi Sichen,
First upload the file, Then do ur validations and delete the records that doesn't satisfy ur requirements.
Thanks,
Vinod.

How can I check the open-mode of an opened file from the file refNum?

How can I check the open-mode of an opened file from the file refNum?
Especially whether a file is opened as read-only or write-only? I haven't found any VI in the panel with file VIs.
Thanks for any hints!

Check this post. Probably you can use a kernel.dll call.
http://forums.ni.com/t5/LabVIEW/file-date-created/m-p/109836

How can I check the billing address on file for me at iTunes?

i received an email stating a change in my billing address. I did not make a change. How can I check the address on file?

You can viee the billions my address on your account by logging into the accontunt's nt via the Store > View Account menu option on your computer's iTunes, or via the 'manage your apple id' button on http://appleid.apple.com
But the email may be a phishing email : Identifying fraudulent "phishing" email
t

How can we check the file is tab deliminated at the time of gui_upload

Hi All,
How can we check the file is tab deliminated or not at the time of gui_upload.
Regards,
Amar

Hi,
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      =
*   FILETYPE                      = 'ASC'
*   HAS_FIELD_SEPARATOR           = ' '       " This indicates fields seperation in the file

How can i check the office web app server(wac client) is calling custom WOPI host?

I am getting an error when I testing my wopi host(which is the same as
example) with Office Web app server "Sorry, there was a problem and we can't open this document. If this happens again, try opening the document in Microsoft Word."
1-how can find the log files of this error?
2-how can i check the office web app server(wac client) is calling my WOPI host?
I am not sure about cumunication between owa to wopi host. I actually dont know how to implement checkfile and getfile functions to wopi host for waiting for call back from owa client.
Note:I am sure that office web app server is configured true. Because i test it with sharepoint 2013 and editing and viewing is working well.

Hi,
According to your post, my understanding is that
CheckFileInfo is how the WOPI application gets information about the file and the permissions a user has on the file. It should have a URL that looks like this:
HTTP://server/<...>/wopi*/files/<id>?access_token=<token>
While CheckFileInfo provides information about a file, GetFile returns the file itself. It should have a URL that looks like this:
HTTP://server/<...>/wopi*/files/<id>/contents?access_token=<token>
There is a great article for your reference.
http://blogs.msdn.com/b/officedevdocs/archive/2013/03/20/introducing-wopi.aspx
You can also refer to the following article which is about building an Office Web Apps(OWA) WOPI Host.
http://blogs.msdn.com/b/scicoria/archive/2013/07/22/building-an-office-web-apps-owa-wopi-host.aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

How can i check the original led display parts serial number on my macbook white

How can i check the original led display parts serial number on my macbook white based on my mabook serial number?
and if i have defective lcd (no display and lcd flex removed) How can i use an external Monitor using display port, What is the possible problem that even i connect my Monitor using mini display port to vga adaptor it has no display.

Have tried 3 new dvd's same responce. On the MacBook, when new DVD was put in the drive, it showed in on the desktop so files could be moved across by right click and move, now its a file DVD.fpbf and after I moved a movie to burn I got error code 0x80020063?

How can I hide the class file ??

Hi !
I has a question, when i write a program of Java, then use the command "javac" to compiler to class file for other people using, but the class file can be disassembled and convert to source code. How can I hide the class file and let people can not disassemble, or can not see the source code. Thinks

See these....
http://www.saffeine.com/
http://www.jarsafe.com/
I recently read this. This will help you.
http://developer.java.sun.com/developer/qow/archive/160/index.jsp
Enojy....
Rajesh

IP Job in BW finished, but how can I check the IDoc receive status in BW ?

Hi,experts
After I execute a Infopackage with loading more than 200000 records data, the infopackage monitor show me yellow light, 186020 from 200000 records. this infomation still show me till now, seaval hours,it looks pause here.
And I check the request in the R/3, the Job has finished. as you know it means the R/3 push the IDoc already finished.
and how can I do now ? or how can I check the IDoc receive status in BW side?

Hi,
I too had the same problem, i executed the following to solve the proble, may be this will help you:
1) Go to T-code SM58 and select TRFC and press F6,
2) For manual push of I-Docs, GO to T-COde BD87 select perticular idoc and see the status if it is not executed properly then do the manual push by pressing Execute option,
Thanks,

I have converted a pdf to word. How can I access the Word file from my online account?

I have converted a pdf to word. How can I access the Word file from my online account? When it says 'download the converted file' I choose a location on my PC and click, but nothing happens. It seems that it can only save the converted file to my online account. I went to my online account but I see no way to look for the file

Hey Fabrizio,
You might need to sign up at "https://cloud.acrobat.com/exportpdf" using your Adobe ID credentials to convert your PDF file to Word.
Do you get the 'download' prompt?
Also, you can find the converted files by clicking at the 'Files' tab.
Please try the same using a different browser and check.
Hope to hear from you.
Regards,
Anubha

How can I see the hidden file and erase it?

I had to make a file starting "." and had to put it on my FTP client. I made it by Text Edit and Microsoft word and save it. Since it is hidden file, I can't see on my Mac but when I use the FTP client and click post, the file listing was showed up and I can check as "Show Hidden file". Then I could post the files on the FTP client. However, since I don't need it on my computer, I'd like to erase it but can't find the files. How can I find the hidden files? Thank you.

if you know the folder then navigate to that folder. Open the Terminal application in your Utiities folder and do the following::
Enable Finder to Show Invisible Files and Folders
Open the Terminal application in your Utilities folder. At the prompt enter or paste the following command line then press RETURN.
defaults write com.apple.finder AppleShowAllFiles TRUE
To turn off the display of invisible files and folders enter or paste the following command line and press RETURN.
defaults write com.apple.finder AppleShowAllFiles FALSE
Alternatively you can use one of the numerous third-party utilities such as TinkerTool or ShowHideInvisibleFiles - VersionTracker or MacUpdate.

How can I see that a file has been sent for workflow?

How can I see that a file has been sent for workflow?
During the workflow phase, the file is locked for workflow. But when the file has been approved (or denied) it will have the same status as it did before the workflow process (unless you trigger the workflow by changing its location).
You can see the workflow history in the "My Request" view, but this way of determining whether a file has been approved seems complicated.
Best regards
Magnus

Hi,
Thanks for the transaction code, but my question is not answered yet.
For example, I use STMS_IMPORT in the Development environement to see the list of the transport that has been made in that environement.
I now have a list of these transports, with a status. But I wanna know if that transport that has been created in the Development environement has been moved to the Sandbox environement.
STMS_IMPORT shows me only the list of transports that has been created in that environement. It doesn't tell me if a transport in DVL has been moved in the QAS, SANDBOX or PRODUCTION environment.
Thanks again,
Julien

How can i do the upload file function using tomcat library??

how can i do the upload file function using tomcat library??

Did you read the document for the library?
If you can't figure it out, why don't you ask the people who provide the library?
This has nothing to do with JavaMail.

How can i check the unzip file has finished unzip process?

Similar Messages

Maybe you are looking for